The Windows Millennium and 2000 obsolescence
Why microsoft has made to use names that mean the same thing for most people, when the 2000 edition and the Millennium edition are quite different for some printers do not work with Millennium edition but will be with 2000, and there are other examples of incompatibility because of this difference?
Both are EOL, so it is no longer. "A programmer is just a tool that converts the caffeine in code" Deputy CLIP - http://www.winvistaside.de/
Tags: Windows
Similar Questions
-
Problem with the window "Variables and stack calls ': Options / interpret as
Hello NO,.
I found a way to run the JIT-debugger LabWindows/CVI on ICB itself...
This is the procedure:
- I put a breakpoint, run the code, and the breakpoint, I opened the window "Variables and stack calls" by right clicking on a variable and selecting 'Display Variable View.
- Any variable shown, I right click and choose Options / interpret as
You're right, I could now reproduce as well. It seems as if the presence of a function pointer, if set or not, causes interpret as shatter the debugger. The ADE does not seem to be affected, but you will probably have to restart your debugging session when this happens.
I created the bug report 425151.
I really appreciate the time spent in this narrowing for me. Thank you!
Luis
-
How to open .tif files using the Windows fax and picture viewer
I have the file open options set to use the viewer photo and fax Windows, however, it is always opens the .tif file in a window of IE. In reading the other posts regarding this problem, I think it may be a number of MIME, but nobody published how to fix this. Can someone send please how to change the MIME type so I can open the files in the right way. I REALLY appreciate it.
Windows XP SP3 with all updates and IE8.Thanks in advance,EricOriginal title: how IE8 to open a .tif file by using the Windows fax and picture viewer?Hello
I suggest that allows you to remove any CLSIDS listed under location:
HKEY_CLASSES_ROOT Type\image/tiff
Note: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
322756 (http://support.microsoft.com/kb/322756/ )
How to back up and restore the registry in Windows.
I hope this helps.
-
Original title: data execution prevention-window Explorer error
Data execution prevention launches when I try to access the windows Explorer, and more particularly when I try to watch videos. So I tried to turn off DEP for windows Explorer. Now, I can access my videos, but they all have text on them that says video PHOTO, & www.jpg.com. I have not downloaded new software recently, so I don't know where it comes from. I ran my antivirus sofware and malwarebytes, and my system is to come clean. How can I remove this from my videos? Thank you!
This isn't how to diagnose and repair the DEP errors - especially not Windows Explorer DEP errors.
But 6 days of inactivity and a link to an article of a MSE = automatic response.
-
How can I disable the next/previous button at the bottom left of the Windows Picture and Fax
I am a beginner of the windows developer, please help me.
1. How can I disable the next/previous button at the bottom left of the Windows Picture and Fax Viewer? E.g. change Registory or others...
2. when I click the print on the Windows Picture and Fax Viewer, the image of the current directorywill appear in print wizard, how can I show only the currently shoing image?
Note: windows XP SP3
Hi NewsAru,
Unfortunately, there is no way to disable the next\previous buttons in Windows Picture and Fax Viewer.
When you try to print an image by using Windows Picture and Fax Viewer it would display all available photos in the folder that contains the image you have chosen to print.
Overview of Windows Picture and Fax Viewer
-
I'm having a problem when I open My Documents, the window opens and looks great, I can go to any folder and open it and everything is well again, however if I then opened my pictures, and then open a file... some files, less than a second after they are open [and the pictures show] will make the window My Documents to disappear also all the desktop icons disappear the computer will then will reset it self , add all the icons and waiting for me to do something.
I have no idea where to start looking for this problem.
I do not have a disk operating system is
When I try to save an attachment, as in email, Explorer opens, I choose a location to save it, then immediately Expolrer closed! I can't save an attachmentHello Philipwk,
Thank you for your message. Please provide comments to a few questions so that we can better help you get your problem solved.1. are there recent changes made to your system, namely the hardware or the software?2 How long present this problem?Here are two methods to try, please try in order. If a system restore fix the problem, do not perform step 2.Step 1:Run a system restore to before that was the problem. Please click the link below to get instructions from system restore.Step 2:Create and test the new user profile.Click 'Start' > right click on 'My computer' > select 'manage '.Double-click 'Users and groups' > below, select "users".In the pane, right click on the space empty and select 'new user '.Enter the identification information you will retain and select OKRight-click the user account that you just created, and then select "Properties".Select the tab "member of" > click on "add".Type Administrators in the field and select "check name".Once administrators is added, click OKDisconnect and connect again your new account, opening pictures with your new trial account. You can even browse your other photo folder by going to the following location:c:\Documents and Settings\ (user account) \My Documents\My imagesIf it works, your profile has been altered somehow. You can then start to copy your data from your old profile to it.Please let us know if it did or did not work for you.See you soonEngineer Jason Microsoft Support answers visit our Microsoft answers feedback Forum and let us know what you think.
-
Can not stop the Windows Help and Support screen to appear several times
I tried to us Windows Defender and features WindowTurn on or off programs in vain to stop the Windows Help and Support screen to appear several times offering assistance on everything that I've just selected if it is a selection of function or the word internet. The copy of Vista came with my new Dell laptop. I have another laptop HP with Vista but do not have to go through this on this subject.
Advice to address this very frustrating situation would be appreciated.
Hi Maree33,
Let's run Windows Update and make sure that you have all the latest patches and service packs loaded. In Internet Explorer click Tools then Windows Update and follow the instructions.
You can also give a quick call Dell and see if this is a common problem with their OEM version.
Please let us know the results.
Brent
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
Tried most methods still Cant turn on the windows firewall and windows defender
k... I tried a few methods now to go into services and in the confirmation of order... Security Windows won't let me turn on the firewall or Defender on vista Basic... hit me with a message saying due to a firewall problem undefined caanot screen settings... This seems very serious please help
Original title: tried most methods still Cant turn on the windows firewall and windows defender... sounds SERIOUS! Help
An Antivirus is a fundamental need for security to prevent malware being installed.
Malware to disable your firewall and your safety programs.
Scan of Malware in Safe Mode with network.
http://www.bleepingcomputer.com/tutorials/how-to-start-Windows-in-safe-mode/#Vista
Windows Vista
Using the F8 method:
- Restart your computer.
- When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap the F8 key repeatedly until you are presented with the Boot Options Advanced Windows Vista.
- Select the Safe Mode with networking with the arrow keys.
- Then press enter on your keyboard to start mode without failure of Vista.
- To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
- Do whatever tasks you need and when you are done, reboot to return to normal mode.
Once in Safe Mode with network, download and run RKill.
RKill does NOT remove the malware; It stops the Malware process that gives you a chance to remove it with your security programs.
http://www.bleepingcomputer.com/download/rkill/
Then, download, install, update and scan your system with the free version of Malwarebytes AntiMalware in Mode safe mode with networking:
http://www.Malwarebytes.org/products/malwarebytes_free
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
For an Antivirus, install one of these free AVs (installation more than it will cause problems).
And first of all remove any AVs expired may still have installed:
Microsoft Security Essentials:
http://www.Microsoft.com/en-US/Download/details.aspx?ID=5201
Avast Antivirus:
http://www.avast.com/free-antivirus-download#TAB4
See you soon.
-
The Windows Help and Support window appears without reason
original title: THE HELP AND SUPPORT WINDOWSHow can I prevent the Windows Help and Support window popping up? My laptop came back from en Acer wh that the keyboard had to be replaced from this window opens at random. When I close it and pop back up again. This happens several times before it stops.
Hello
You can try methods below and check if it helps:
Method 1:
You can try to perform the clean boot and check if the problem still persists to see how to perform the clean boot, click the link below and follow the steps in the Kb article.
http://support.Microsoft.com/kb/929135
Warning: After using the boot is a way to solve your problem step 7 follow-up to reset the computer to start as usual.
Method 2:
I also suggest you to run a scan antivirus online free from Microsoft Web site.
one) to scan online for any virus threats
Click: http://onecare.live.com/site/en-us/default.htm
(b) click on "Security Scanner" and select "full analysis of the Service.
You can download free antivirus Microsoft Microsoft Security Essential . Click on the link to download Microsoft security essentials: http://www.microsoft.com/security_essentials/
Hope this helps,
-
I have a strange problem. When I first installed Windows Vista Home P. 32-bit program and features or uninstall a program window did not have a details pane; It was the only window that did not have. One day, he showed no reason and now it will not disappear. The window workstation and others have had the part, but not the window programs and features. If I try to disable the window pane programs and features disables it for all windows operating system. Anyone know how this can be reversed or where the value for this is held in the registry?
I'm going crazy!
Thank you.
Do the opposite
http://www.askvg.com/how-to-re-enable-missing-details-pane-in-Windows-Vista-Explorer/
-
Hello
I have a Dell Ultrasharp U2415. I've read all the FAQS and I know I have to perform the SUBMISSION, but before doing so, I just want to know if it is normal to have a gap between the Windows desktop and the edge of the screen. If the Windows desktop is not covering or fill the entire screen. There all around the smaller than a 1/4 "gap between the edge of the windows desktop on the edge of the bezel of the monitor, and this model has almost no bezel. The graphics settings in Windows 10 are set to use the native resolution of 1920 x 1200 monitor. I tried with different computers (all windows 10), and the drivers are up to date. The monitor is connected via HDMI since I don't have portable computers not with DP interfaces. Laptop computers have Intel and ATI video cards. I have check the put option to scale on the video card software and it is set to 100%. So, is this gap normal? Is the edge Office Windows 10 supposed to touch the physical edge of monitors? If the gap is not normal, I will perform the integrated test.
TIA!
Based on the YouTube comments, which seems to be normal. "But you must run the APPLICATION to see if the"smaller than 1/4"gap" appears. If Yes, then we can say that it is normal. If this is not the case, then some settings of the operating system is the culprit.
-
Opens the window "view and track your downloads" instead of the program
Each program (with the .exe extension), I try to open goes directly to the window 'view and follow your downloads. Even Notepad is present it is impossible to apply the patch that I found online. It started after trying to download an update to PhotoShop CS so I can open RAW files.
Hello
The problem is specific to just the .exe files?
I suggest you refer to the following methods.
Method 1:
Read the following article.
When you run an .exe on a Windows XP, Windows Vista or Windows 7 computer file, the file can start another program
http://support.Microsoft.com/kb/950505
Method 2:
Run a scan antivirus on your computer.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: The Microsoft Safety Scanner ends 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again.
Important: While running scan on the hard drive if bad sectors are found on the hard drive when scanning try to repair this area if all available on which data may be lost.Method 3:
Create a new user account and check account number.
Create a user account
http://Windows.Microsoft.com/en-us/Windows7/create-a-user-account
I hope this helps.
-
How can I get the Windows Fax and Scan program to scan mutiple page to a file rather than to each page into a separate file?
You don't, so use the scanning software provided by your device manufacturer, assuming that you have installed the unknown device with their installation cd or the download direct the full version of this site to the
-
whenever I try to use the windows fax and scan, I have this message:
whenever I try to use windows fax and scan, I have this message: Windows fax and scan cannot access your documents folder. Please, make sure that windows fax and scan can access this folder. How I do that?
Hi Mohamed
Thanks for your posting in the Microsoft community
You can check if you have my documents in C:\Users\ (username) \My documents correct location.
If the problem persists, you can deactivate and then activate Windows Fax and consolidated expansion of print and Document services from the windows on or off check and option features if this solves the problem.You will need to disable the function, and then click OK. Now open Windows Fax and Scanand check. Yet once activate the Windows Fax and Scan and check if you experience the same problem.
See the link below to display the window for the deactivation and activation windows fax and scan under Print and Document services and check option.
http://Windows.Microsoft.com/en-us/Windows7/turn-Windows-features-on-or-offOR
delete the file and create a directory named "Fax" to
c:\users\rich\Documents\ with subfolders called "Drafts", "Inbox", and
"Personal cover pages. You click Windows Fax and ScanIt will work
-
What should I do to use the Windows Fax and Scan of my computer at home for my work fax #?
What should I do to use the Windows Fax and Scan of my computer at home for my work fax #?
Original title: Windows Fax and Scan
What should I do to use the Windows Fax and Scan of my computer at home for my work fax #?
A piece of hardware called a Fax Modem, installed in or connected to your computer with the appropriate device drivers from the manufacturer of the device, you have installed in or connected to your computer. And a telephone line.
Maybe you are looking for
-
Safari and Firefox needs ways to enable/disable/hide (the menu and via shortcuts) tabs, Favorites (bookmarks) bar, (and bar address [which do not have Safari]), so that they are visible to a person who you show your screen not visible on just one ful
-
I have a Microsoft windows vista-Home premium (x 64) edition HP Pavilion a6542p. I want to upgrade Windows vista to windows 7 using Windows 7 Home premium (x 64) dvd. Anything like model number, system serial number change? If everything will change
-
2013 LabVIEW allows the user to return to the LabVIEW 2012 or 2011?
Hi all I have LabVIEW 2013. I noticed that in LabVIEW measurement and Automation Explorer (MAX) under the LabVIEW Run-Time 2012 SP1 f2 software is listed. This somehow means I can return or switch between LabVIEW 2013 and 2012 without having to insta
-
On my old Dell with Windows XP I installed Tuneup Utility on an experimental basis, it changed things that made it impossible to access the C:\ drive to install the important updates and uninstall Tuneup Utilities. Anyone have a solution? Help, pleas
-
AutoPlay ignores the options I choose every time.
I have a lot of old DVD-r, years ago. When I insert one of them, I want AutoPlay to open it as a record. Instead, I have the popup asking what he should do. Then, I go to AutoPlay, under mixed content and select "open folder to view files using Windo