The windows service install are not accessible. This can happen if windows install is not properly installed. Please contact the support staff

Similar Questions

• Try to install Topaz Denoise and Topaz Clean, getting the error "cannot access the windows service install. "This can happen if windows install is not properly installed.

  This problem arises when clean installing topaz denoise and "Topaz". I tried the fixes in this article http://support.microsoft.com/kb/2642495 and none of them seem to work. This problem arises when clean installing topaz denoise and "Topaz". I tried to install other programs, and the error does not appear anything else. I also restarted my computer, any advice on how to solve this problem would be appreciated.

  Original title: the windows service install are not accessible. This can happen if windows install is not properly installed. Ask your assistance technical assistance

  Hello

  Have you made changes on the computer before this problem?

  I suggest you try these methods and check the status of the issue.

  Method 1:

  Keep the computer in a clean boot, try to install the programs and check the status of the issue.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7.

  http://support.Microsoft.com/kb/929135

  Note: Please, go to step 7 of the Kb to maintain the computer to a normal startup after you fix the problem.

  Method 2:

  I suggest to try the methods mentioned in the following article and check the status of the issue.

  How to solve the problems when you install or uninstall programs on a Windows computer.

  http://support.Microsoft.com/kb/2438651

• Video error: the files needed to display video are not installed or not working not properly. Please restart Windows Media Center...

  Please help - it's driving me crazy! I got this to work!

  I am using Vista Ultimate and a connection (cat-5) ethernet to an xbox 360 as a Media Extender (via a Linksys router). I get the error of the video:
  "The files needed to display video are not installed or not working not properly." Please restart Windows Media Center or restart the computer "."

  I have a Happauge PVR 150 TV capture card installed, and you want to watch TV and my video files Via the Xbox 360. I can see the guide for lists of TV programs, but not to look at them without getting the message above.  I can also put in place a program to record, display the video thumbnail, but not play. Video files only will play are videos very select few years recorded only where there is.

  My graphics card is an ATI 2900XT - 512 MB of ram, with the latest drivers.

  I've seen a number of discussions on the web that describes the same (or similar) problem, but none of them seem to have no solution.

  I had Norton Internet Security installed and it has since withdrawn because of the firewall. I had thought, it could be a firewall issue, but it is not. I'm now using the Windows Firewall for now.

  I deleted and reinstalled the Xbox as an Extender media several times... no help. I have re-installed the complete drivers for the video capture card, it has not helped either. I checked and double-checked the settings on my router as well.

  The xbox is set for the share on my multimedia computer. The correct files can also be programmed for sharing.

  On the PC in Windows Media Center, I can view the TV programs, record programs etc etc etc all work.

  Any help would be really appreciated!

  Hello Lowwatts,

  Microsoft Xbox 360 community

  Thank you for visiting the website of Microsoft Windows Vista Community. The question you have posted is related to

  Microsoft Xbox360 community and would be better suited to the Microsoft's Xbox 360 community. Please visit the link below to find a community that will provide the support you want.

  Community Microsoft Xbox360

  Try following the steps in this article:

  Enjoy Windows Media Center on your Xbox 360 with your music, photos, recorded Live TV * and online media

  This should solve your problem.

  Let us know if these steps solve your problem.  I hope the information is useful.

  Kind regards

  Anthony
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• SE error message: "there is a problem with this windows package install." A program required for this install to complete could not be run. Contact your provider staff or the support package 'after updating to iTunes

  Original title: after recent update, the installation software WONT work properly! Help!

  • I am in desperate need of aid. I didn't something again on my computer, but these recent software updates. I've recently updated my my itunes and from itunes then will opens not or install it. It was working fine before that was last updated, but now used. I tried to uninstall several times, in a variety of versions. Still nothing. Is not specific to the user and system wide as well.

    I get a message saying "there is a problem with this windows package install." A program required for this install to complete could not be run. Contact your supplier of staff or the package of support ".

    Anyone know what I need to do? Or how to fix it?

  Hi MxGurl,

  If this occurs after the installation of update Itunes, then go to the following link and check if it helps.

  iTunes for Windows Vista or Windows 7: Troubleshooting unexpected quits unexpectedly, freezes, or launch issues

  http://support.Apple.com/kb/TS1717

  If this does not help, you should contact Apple support or post in the Apple discussion forums.

  http://discussions.Apple.com/category.jspa?categoryID=149

  You can also check out the following link and try the steps by Suresh I Support Microsoft, moderator and Andre.Ziegler and check if this may help

  http://social.answers.Microsoft.com/forums/en-us/vistaprograms/thread/11f4e2c0-0595-4c7f-8579-e52d2c4bf36c

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Windows can't open add printer. The local spooler service sprint does not work. Please restart the spooler or restart the machine.

  Hello world

  I have back Windows 10 to Windows 7 Home Premium as suggested previously and it worked fine. Then knit as well as the sound function keys, but I now have a problem with the printer. I have a Toshiba Satellite.

  I am trying to print and get the message "...". You must install a printer.

  I reinstalled my Epson WF-2630, but when I try to add a printer in devices and printers, I receive the message "Windows can't open add printer." The local spooler service sprint does not work. Please restart the spooler or restart the machine.

  Can someone help, please?

  Thank you very much

  WestAusShortie

  Hello West,

  Thanks for posting your question on the Microsoft community.

  Thank you for details on the issue.

  This problem may occur if the print spooler service is not running.

  Please refer to the suggestions of John Rubdy replied on April 29, 2010 and check if that helps.
  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-hardware/Windows-cant-open-add-printer-the-local-print/41f98aad-3a9c-47A6-978b-7c20e3ce9e0b

  I hope this information helps.

  Please let us know if you need more help.

  Thank you

• The streaming videos on Windows Media Player error "your media usage rights were corrupted or are no longer valid. This can happen if you have replaced hardware components in your computer.

  I'm trying to videos from 3 completely different sites.

  The last post I got Windows Media player was

  "Your media usage rights were corrupted or are no longer valid. This can happen if you have replaced hardware components in your computer. »

  I replaced WITHOUT hardware on my computer, and last week, I could listen no problem at all!

  How to get corrupted my media usage rights and how to remedy the situation?

  I'm not a complete dummy, but sometimes I feel like one. :(

  Hello

  This problem can occur if the media rights (DRM) a folder is corrupted. We need to reset Windows Media DRM in delete/rename all the files in the Windows Media DRM folder. Note that the Windows Media DRM folder is a hidden system folder.

  Check out the links and follow the suggestions that are marked as an answer:

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-Winapps/getting-error-messageyour-media-usage-rights-have/54bfacbb-C104-4c22-800F-f293d18d94c2

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-pictures/constantly-getting-this-message-your-media-usage/840c560d-04aa-4ae2-aed0-59022cfdef04

  Please let us know if the problem still persists.

• I tried to install the latest version of itunes with windows 10 but he said "there is a problem with the installation package. A program to complete the installation could not be executed. Please contact the support staff. No matter what guys?

  I tried to install the latest version of itunes with windows 10 but he said "there is a problem with the installation package. A program to complete the installation could not be executed. Please contact the support staff. No matter what guys?

  (1) temporarily disable your security/antivirus software

  (2) download iTunes from the official source: http://www.apple.com/itunes/download/

  (3) try to reinstall

  (4) turn on your anti-virus

• By connecting to Window Vista is errro ' configuration data for this product is damaged contact the support staff.

  1. I get this error before moving on to the windows vista login ' configuration data for this product is damaged contact the support staff "I tried repairing the system by using the Windows disk installation and chkdsk/f/r and none of the steps helped.
  2. on a different vista machine it keeps restarting on before we get to the opening of windows session, I managed to make system repair using the windows disc and he managed to survive but, unfortunately, after a couple of stop and restart, the same problem happens again.

  Kindly help on how I can make these problems disappear.

  Hello

  Method 1: Check to see if you can boot into safe mode. If you can start in safe mode, you can perform the clean boot and test functionality.

  Step 1: Check the functionality of the computer in safe mode.

  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

  If it works fine, you can check if the problem exists in a clean boot state.

  Step 2: Perform the clean boot.

  http://support.Microsoft.com/kb/929135

  Note: After you check the clean boot feature configure Windows to use a Normal startup using step 7 proposed in the above mentioned link.

  Method 2: If you are unable to boot into safe mode, try to Start the computer using the disk and recovery options, select command prompt, run System File Checker tool.

  How to access the System Recovery Options menu?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-happened-to-the-recovery-console

  Download link for the tool (SFC.exe) System File Checker.

  http://support.Microsoft.com/kb/929833

  I hope this helps!

• The application cannot be installed because of a certificate problem.  The certificate does not match the certificate of the installed application, does not support upgrades of the application or is not valid.  Please contact the application author.

  The application cannot be installed because of a certificate problem.  The certificate does not match the certificate of the installed application, does not support upgrades of the application or is not valid.  Please contact the application author.

  That's what I have I am trying to download adobe programs

  which is not a download error unless you use some sort of download manager/assistant that is also trying to install.  do you have a download manager/assistant?

  or is it an error of installation and, if so, what type of program (name and version) are you trying to install?

• I purchased a download version of Lightroom 6 from Amazon and when I write the number of license keys I get this message "we are unable to validate this serial number for adobe Lightroom. Please contact Customer Support. "

  I purchased a download version of Lightroom 6 from Amazon and when I write the number of license keys I get this message "we are unable to validate this serial number for adobe Lightroom. Please contact Customer Support. "

  Contact adobe support by clicking on this link then "still need help" as soon as it appears, https://helpx.adobe.com/contact.html

• Hotmail account: I can't receive e-mail from addresses that are not already in my contacts list

  I can't receive e-mail from addresses that are not already in my contacts list, for example the library.  My account has been hacked recently, and I have informed Windows CE.  I then installed Avast security.  Since only known e-mail senders spend their emails.  Help, please.

  • Error messages
  • Recent changes to your computer
  • What you have already tried to solve the problem

  It seems that Avast is blocking messages from anyone not in your contacts list (much too tight fixed).  Disable the function of checking email and see if that solves the problem.  If so, run it without the option of e-mail enabled - it does not really help as long as you take normal precautions (as not to open attachments from people you don't know / trust and things like that).  If you don't know how to disable this feature, contact technical support Avast (I do not use the product so I don't know how, but it's probably under Options or something like that).  If this does not work, try to go to Microsoft Security Essentialshttp://www.softpedia.com/progDownload/Microsoft-Security-Essentials-Download-131683.html where I know that this problem is not happen and see if that solved the problem.

  I hope this helps.

  Good luck!

  Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Install streets & trips 2013 on windows 8 - "a licensing initialization error has occurred. Please contact customer support for further assistance. Error 0xC004D301 ".

  Original title: new installation of streets & trips 2013 on windows error 8.

  I have my windows 8 installation with the assurance that my products purchased from Microsoft survive the 8 Windows Reinstall "refreshed". Well all the Microsoft products were there but would not work. Each gave the error for rerinstall the product I did no problem except for the problem with the streets of travel & which still exists and is completely ignored by Microsoft, according to my research. The error is: "a licensing initialization error has occurred. Please contact customer support for further assistance. Error 0xC004D301 ". I tried all the suggestions that I have met on the internet. The most galling was given by Microsoft technology in its response to this problem. "The license data is probably corrupted" OK, makes sense, BUT how can I fix that you genius. Someone had managed to get the program to work after this error message?

  Success!  Hi John, I don't know if this will solve your problem because I am running windows 8.1 and tries to install streets & trips 2011.  But I had a similar symptom that you knew.  Here's what I did: just right-click on the icon in the start menu, select programs and features.  Uninstall all versions of Microsoft Visual C++ 2010, I had two.  Then I opened the installation dvd in Explorer, click right on dvdrun, marked the area run as long as administrator (not sure if it did anything or not), hit apply, then double clicked on dvdrun and everything worked.  I could install, validate, save, and run the program!
  A warning, I don't know what are the potential problems that may result in removing these two programs, I hope that if I run into something I can install them again without too much trouble.

• Your device or the computer could not be verified. Contact technical support for assistance.

  Your device or the computer could not be verified. Contact technical support for assistance.

  Go to Library/Preferences/SystemConfiguration/NetworkInterfaces.plist. Move the NetworkInterfaces.plist file to the trash. Restart your Mac.

  If that doesn't work then contact the Apple Support:

  Apple Store Customer Service at the the 1-800-676-2775 or see the online help for more information.

  Contact product support and tech: Contacting Apple for support and service - this includes

  numbers of international calls...

  Mac App Store: Apple - Support - Mac App Store.

  For iTunes: Apple - Support - iTunes.

• I am facing a problem while pay buy creative cloud this message appeared (there was a problem processing your order, please contact our Service team customer care for assistance)

  I am facing a problem while pay buy creative cloud this message appeared (there was a problem processing your order, please contact our Service team customer care for assistance), whatever?

  Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
  Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===> NOTE DAYS AND TIME
  Don't forget to stay signed with your Adobe ID before accessing the link below

  Creative cloud support (all creative cloud customer service problems)
  http://helpx.Adobe.com/x-productkb/global/service-CCM.html
  -or by phone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html

• ePub graphics are not properly sized

  ePub graphics are not properly sized after transfer ePub to my iPad via iTunes.

  I use indesign 6.0 on microsoft system 7 and transfer the ePub to my new iPad (32 GB, 2048 x 1536 resolution).

  The graphic is set for "rasteration custom" size defined "compared to the width of page".

  The chart appears correctly in the Adobe Digital Editions software, but when I transfer the ePub to my iPad it looks full-size.

  If I put the lid "rasterize first page" the graphic on the cover is sized correctly, but the graphics in the document are full size.

  When I create the same file using inDesign 5.5 everything works correctly.

  What I'm doing wrong or what setting I have not put properly?

  Thank you

  Dennis

  Welcome to the world of how different EPUB readers manage the same code HTML and CSS.

  I just did a test with an image that had the Relative to Page and Custom pixelation of InDesign CS5.5 and CS6 format settings.

  As far as I can tell that each version of InDesign is written the correct code but in a different way. ADE meets it, but iBooks on your iPad does not work.

  Here are the details: I created a framework for broad text of 45 pica and anchored a 14 pica graphic framework.

  InDesign CS5.5 the relative size of exports under the image like this tag:

  

  InDesign CS6 creates a class for the

  tag graphic image and referenced in the CSS it creates. Here's the HTML code:

  
  
  />
  

  Here is the CSS for the image-1:

  }
  {img. Frame-1
  Width: 27%;
  }

  I would say that these two are the correct code. However, iBooks handles differently the CS6 version.

  Here's how the CS5.5 version looks in iBooks:

  

  And here's what the CS6 code looks like:

  

  It handles differently. So I would say that, if it is important that on the iPad, it is smaller, you must modify the code to insert the attribute of scaling in the HTML instead of the CSS tag,