The Windows Setup program does not start

I'm trying to install 10 windows using boot camp. I'm on a macbook pro retina early 2015 on OSX 10.11.2

I opened the boot camp assistant and it brings me to a screen to select the ISO and partition my drive.

After I choose how I want to partition my drive, it brings me to a screen where it downloads windows supported, copies of windows install files and restarts.

At this point, I expect 10 to start windows installer, however it brings me right to the normal sequence of boot OSX. I tried now option when it is booting, but I only see the OSX disk to start. Then, I go to bootcamp again and it gives me the ability to delete my bootcamp partition. I checked in disk utility, and it seems that the drive is partitioned in fact, but I can't get the windows installer to run and install windows on the new partition.

I was wondering if anyone had questions similar to this.

Thank you!

Please perform the following two procedures...

Reset the management system (SCM) controller on your Mac - Apple Support

How to reset the NVRAM on your Mac - Apple Support

If you have any external storage connected, unplug it during the installation process. New attempt of BCA. You will need to remove the previous partition, and start all over again.

Tags: Windows Software

Similar Questions

  • How to solve a problem when the windows setup program does not open a program, says I need to install it. and an error message 1706

    How to solve a problem when the windows setup program does not open a program, says I need installation cd and a 1706 error message happens.

    Hi PAtwoodwu,

    1. what program are you trying to install?

    2. did you of recent changes on the computer?

    3 does happen with all programs?

    Check and make sure that the Windows service install is running on the computer.

    (a) click on start to reduce this includes this image, click run , type services.msc , and then press enter to open Services.

    (b) right click on the Windows Installer service and then click Properties.

    (c) if the box Startup type is set to Disabled, change it to Manual.

    (d) click on OK to close the Properties window.

    (e) right click on the Windows Installer service and then click Start. The service should start without errors.

    (f) click on the file menu, and then click exit.

  • The Windows Setup program does not open. Stuck with black screen.

    Hi all

    I'm trying to install windows 7 from an iso file using Bootcamp assistant, Version 6.0.1 but unfortunately just windows installer does not open so I'm stuck with this black screen. I left my sit MacBookPro autour with this black screen during more than half an hour and after awhile, it gets really hot so I interrupted the "process."

    I have reset the NVRAM (command + alt + p + r) which did nothing.

    I followed the instructions of bootcamp. I downloaded the correct drivers for my model of mac pro book, I created a bootable and partitioned my drive.

    The forum has a lot of "black screen problems" but none of their solutions worked for me.

    Any help would be greatly appreciated!

    Thank you

    1. leave BCA creates the installer from USB, but not to partition your drive.

    2. download the correct drivers to install Windows 7 and previous versions on your Mac with Boot Camp - Apple Support and replace $WinPEDriver$, AutoUnattend.xml, and the entire folder on the drive flash USB2 Bootcamp.

    3. run BCA, connect the USB cable and click only the Windows Installer and test if the Setup program starts.

  • the Windows Setup program does not work after restoring

    Since I restored my system, when I try to open excel or word, I get a windows install. Even after installing windows install 4.5. How can I get excel and word to work?

    Hello

    1. could you give us the exact error message?
    2. do you get this error only when you use Excel?

    Method 1.
    I recommend you to reregister the Installer engine.
    Here's how:
    a. Click Start, click Accessories and then click command prompt.
    b. at the command prompt, type the following and press ENTER after each line:
     
    MSIExec /Unregister
     
    MSIExec/regserver


    Method 2.

    It seems that there is a background app that launches the installer of Windows. We can perform a boot minimum troubleshooting to find the same thing. You need to perform a clean boot to find the program that is causing and then disable or remove.
    How to configure Windows XP to start in a "clean boot" State
    http://support.Microsoft.com/kb/310353/en-us
    Note: When you are finished troubleshooting, follow the steps as explained in the article to reset the computer to start as usual.

    I hope this helps.

  • AiOSoftwareNPI (* .ms) the Setup program does not start when I start my computer.

    original title: AiOSoftwareNPI

    I'm having a problem with a software AiOSoftwareNPI problem (* .ms) the Setup program does not start when I start my computer.

    I know it's a Windows Installer but I don't have a disc with this route. I even tried to reinstall the windows xp disk and it does not work, I still

    get the same box when I shutdown and restart. The box allows me not to leave him continues to appear.

    Thank you

    Ms. C

    After doing a Google search for AiOSoftwareNPI and followed by the reading of many different threads in various forums, I found that it is for drivers for an HP all-in-One printer.

    You have an HP printer?

    If so, the usual suggestion was to place your HP printer disk in your CD/DVD drive and restart. After reboot would be installed the necessary files and the pop - up would more appear at startup. I don't know if it will actually work because in all the discussions I've read, none of the original poster never responded by saying that it worked or not.

    The next most common suggest was to download the latest driver for your HP printer to your version of Windows (including at the level of the ILO) and install it. Yet, not a single original poster has responded.

    In fact, if you have an HP printer I suggest to visit the web site of HP support below the link to get the latest drivers and their installation. Visit the support for the correct installation method and if you need to remove the old driver first. You can also visit the communities of Support HP for assistance (a link for communities is also on the next page).

    Support HP & drivers
     http://WWW8.HP.com/us/en/support-drivers.html

    Kind regards

  • Firewall Windows has been disabled by a virus or Malware. System is now cleaned and Salvation took up the Task Manager, but the Windows Firewall service does not start. How to run again.

    Firewall Windows has been disabled by a virus or Malware. System is now cleaned and Salvation took up the Task Manager, but the Windows Firewall service does not start. How to run again.

    Suggest you read the following: http://answers.microsoft.com/en-us/windows/forum/windows_7-security/virus-recovery-error-codes-0x80070424-and/28ed2ede-076c-4955-bb49-44d0c2ee1ed3

    I hope this helps...

  • The Windows Audio Service does not start

    I have no sound at all. Show my audio device is installed and working. I get a message that the Windows audio service and audio end point service Windows (I think (does not start.)

    Hi JamesSimpson11759,

    ·         What happens when you try to start the Windows Audio Service? You receive an error message or error code?

    ·         Did you do changes on the computer before the show?

    I suggest you to run the Microsoft Fixit and check if the problem still persists.

    Tips for solving common audio problems

    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-sound-problems

    You can also view the article mentioned for more information:

    No sound in Windows

    http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-Windows

    Let us know the results.

  • The iTunes Setup program does not open windows 10

    I recently bought a new computer that comes with windows 10 home installed on it. When you try to install the version of Itunes available on the itunes site, the program does not open, but instead appears with the message

    The same goes for the other files installed that have been suggested for windows 10 errors and I can't seem to find a solution. I even tried to contact Microsoft technical support team however they were no help either.

    Help me please!

    I have also the same problem and same message. I have a new Lenovo laptop with windows 10. I sent support from Lenovo. I hope they can help.

  • When you install Microsoft Streets and Trips 2010 download. He wrote not correctly in the registry. Program does not start.

    I had problems with my version of Streets and Trips 2008 and decided to upgrade. After installing Microsoft Installer, I get the same error message. "the program has not been copied correctly in the registry. Rerun Setup from the same place. »

    Try the procedure suggested Installation problems streets & trips 2010

    If that does not solve the problem with your new streets & trips 2010, tell us what problems you have experienced with your earlier version of streets & trips 2008. Only has the old installation refused to start, or other issues?

    You can look for answers and advice associated with Microsoft Streets & Trips to the forum: http://www.laptopgpsworld.com/microsoft-streets-trips/

  • USB ports no-opperational in the Windows 7 environment, does not start mode command line safe

    Quick description: experienced difficulty trying to reformat a HD problem. It has been suggested that I have download the diagnosis of the manufacturer. Did. Restarted the computer as required to run the new program. After reboot, no USB port work Windows. Considering that all my USB inputs, it is extremely annoying. Input devices still work on other computers and still work during the start upward (before windows), also does not open in safe mode with the command prompt.

    I tried to reformat a LaCie HD that was previously used for a Mac for PC usage. Gave me a code 43 error and a problem code: 0000002B. Had a bad"block" in the HD somewhere read that I should try to use the manufacturer diagnostic tools to check the HD on.» Downloaded the "LaCie Update Tool" and installed it. It took a reboot. After the reboot, any USB devices worked. (Will begin another thread on the HD as soon as I have this problem.)

    Tried to restart in Mode without failure. Then the Safe Mode with the command of the DVD prompt. (However, I'm not 100% sure that I'm loading from the DVD, I couldn't find a good answer on how to do something so basic.) Always seems to load in the window 7 - always end upwards the newspaper account on screen - certainly no command prompt.

    The keyboard and mouse work on other systems and the keyboard works fine before the Windows 7 screen (the selection of mode that starts in) so I'm pretty sure that it is a Windows 7 problem. Can't really get in the error codes that I can't enter anything now or move the cursor at all. (I'll try to borrow a non-USB keyboard and mouse).

    After a reboot when it asks me what I want to start the computer in safe mode or normal windows 7, loading the drivers, it stops at:

    \windows\system32\DRIVERS\CLASSPNP. SYS

    I don't know if this is normal or the system stuck.

    I tried a manual reset of the motherboard and deleted manually the CMOS on the motherboard did not help - but don't expect really.

    I think I need to run a disk check / fix from the command prompt, but I can't even at the command prompt to the top.

    Thanks to anyone who takes the time to answer, a lot of satisfaction in advance.

    My system:

    Windows 7 64 bit

    ADM Phenom 955 Black Edition Quad

    ASUS 890FXA-UD5

    Microsoft USB wireless keyboard and mouse

    Less relevant stuff: ADATA DDR3 1600 G XPG 2 X 2 GB, Sapphire Radeon 4670 1 GB, Western Digital Caviar Black 640 GB HD, ASUS DVD/CD drive (DRW 24B1st) Corsair TX 750 W

    The Repair Mode command prompt supports USB devices. Here is how you get there:

    1. put your BIOS so that it uses the DVD drive as its primary boot device.
    2 start the computer with your Windows 7 repair CD.
    3. press a button if you are prompted to start from the DVD.
    4. Select repair when prompted.
    5. Select the keyboard language when you are prompted.
    6. When you are prompted, select command prompt.
    In step 2, you can also use the Windows 7 installation DVD. The subsequent steps are similar to those above.

    The process described above is independent of everything that is on your hard drive. If your USB devices still do not work then you probably have a motherboard problem. If it is a desktop computer then you could by a 4 port USB card.

    If you get an account and password for the boot process then you dΘmarrez not from the CD/DVD. I've seen a number of messages in which people reported that they were unable to boot from the CD/DVD drive. Here are the most common reasons for these failures:
    -L' poster neglected the prompt to press a key to boot from the CD/DVD drive.
    -The CD/DVD boot was not a boot disk or was damaged. Use it on another machine has confirmed this.
    -Some BIOS setting was incorrect. Start with some other boot CD/DVD (for example here: http://pogostick.net/~pnh/ntpasswd/) confirmed it.
    -The CD/DVD drive has been damaged or is unable to boot from a boot CD or DVD.
    -The machine has a hardware problem (for example, a motherboard problem) which prevents start in any mode.

  • Network key/password on the Windows XP program does not?

    I am trying to reinstall/repair my windows XP program and run on Parallels, but for some reason any the network key/password I provided for the CD does not work this time?  These things expire after a while that I didn't take my purchase since installing it 4 years ago.  Any help is appreciated.  Thank you

    Hi Kim,

    Are getting you error like "the product key used to install Microsoft Windows isn't valid? If Yes check out: http://support.microsoft.com/kb/883254.

    I hope this helps.

  • Windows XP-windows setup program does not work

    My windows installer does not work. Have a new Kodak printer/scanner/copier and can't get installed it without windows installer. What should I do?

    Hi dcapouch,

    What is the error message that you receive?
    Also provide error code, as applicable.

    Is this error message only when you install the printer?

    Check if the install Windows service is set to automatic. Steps to follow:

    a. Click Start and type services.msc in the search box

    b. Locate the Windows Installer service

    c. right-click on the service

    d. If the service is stopped and then starts the service

    e. to start the service, right-click on the windows installer and select Properties

    f. and in startup type, select automatic

    g. now try to install and check if that helps.

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Windows Firewall service does not start after the removal of Virus

    Hello

    I believe that my son's computer has been infected with the Trojan.Agent.Ed virus.  I managed to remove it (from different folders in AppData), but a few vestiges remain of course.  The windows firewall service does not start - it throws an exception to access denied on startup and when I try to start the service manually.
    I tried to run the Sysinternals Process Monitor to display all events ACCESS DENIED and checked the permissions on the key to registry MpsSvc in HKLM\System\CurrentControlSet\services and compared to a corresponding Windows 7 machine.  I've even exported the key MpsSvc and sous-branches of the laptop in good health and tried to import into a failure, but the import does not seem to occur, even if it gives a message "imported".
    I also tried the troubleshooting of Windows Firewall that confusedly says:
    "Windows could not start the Windows Firewall... Not fixed
    "Set permissions for the registry keys involved"... succeeded
    "Windows Firewall service is not started. Not fixed
    "Starting the Firewall Service"... succeeded
    Any ideas would be most appreciated.
    Thank you.

    It seems that I solved the problem by running this:

    that I found in a post on this thread:
  • Just bought Photoshop elements 13. Failed to install. ERROR: This Setup program does not support installation on a 64-bit Windows operating system. Please download the 64-bit version of Photoshop Elements.Where is the 64-bit version?

    Just bought Photoshop elements 13. Failed to install. ERROR: This Setup program does not support installation on a 64-bit Windows operating system. Please download the 64-bit version of Photoshop Elements.Where is the 64-bit version?

    PES 10, 11, 12, 13 - https://helpx.adobe.com/photoshop-elements/kb/photoshop-elements-downloads.html

    You can also download the demo version of the software through the page linked below and then use your current serial number to activate it.

    Don't forget to follow the steps described in the Note: very important Instructions in the section on the pages of this site download and have cookies turned on in your browser, otherwise the download will not work correctly.

    Photoshop/Premiere Elements 13: http://prodesigntools.com/photoshop-elements-13-direct-download-links-premiere.html

    PSE 13 trial - http://www.adobe.com/cfusion/tdrc/index.cfm?product=photoshop_elements

    (Info for PC vs Mac: https://forums.adobe.com/thread/1658959?sr=inbox&ru=3738552)

  • This is the error I get when trying Adobe Premiere of 13 elements of the configuration.  ERROR: This Setup program does not support installation on a 64-bit Windows operating system. Please download the 64-bit version of Premiere Elements.

    This is the error I get when trying Adobe Premiere of 13 elements of the configuration.  ERROR: This Setup program does not support installation on a 64-bit Windows operating system. Please download the 64-bit version of Premiere Elements.  How to work around this issue and get this downloaded.

    Lisa, please try of products download Premiere Elements | 10, 11, 12, 13 and let us know if you need help with this.

    Atul_Saini

Maybe you are looking for