The words on my screen to go beyond the right margin. Difficulty?

Thank you.

Hi Dave,.

1. have you done any hardware changes or software on your computer before this problem?

2 are you facing this problem in a particular application?

You can follow these links and check if the problem persists:

Change your screen resolution

Change the resolution of your monitor

Hope the helps of information.

Tags: Windows

Similar Questions

  • Lightroom CC 2015 11 x 17 prints beyond the right margin - Epson Expression XP-906

    In another thread of printing problem 11 x 17, I saw that the original question has not been addressed and that others appeared to have my problem have been add to the discussion, they seem related problems with print 11 x 17, but not the same exact problem. Here's my problem. Thanks in advance for reading.

    It is a newer version of 6 color Epson all in one printer, and exit 11 x 17 look nice. However with the latest drivers and 10 Windows and Mac Book os X when I put in place to print a 11 x 17, every time, printing continues beyond the right margin. With margins 0.25 in. and cell size 10.50 height and width 16.50, my image extends approximately 0.125 in. beyond the right margin line. When I'm saying, I mean the short edge that is not inserted in the printer to start a unique landscape of 11 x 17 print. I took the suggestions of the other thread using a Lightroom color management profile, reduced to fit, stretch to fit, use margins without borders and always set to nothing does not. Mac and Windows 10.

    I'm out of the idea and the Epson Ultra Premium Luster is expensive for just to try this or that... Anyone have the same printer, or delivers and solve it?

    Once again thank you for taking the time.

    Concerning

    Jason C

    I think I found my problem in my manual.

    I've always used Epson presentation matte paper, which comes in "11 × 17 inches (279 x 432 mm)."

    The new document I'm working on Epson Ultra Premium Luster Photo paper is real paper A3 "A3 (11.7 × 16.5 inches [297 × 420 mm])."

    I guess that (Yes for sure me) once I put the size of the paper correctly, it will be printed within the margins of model.

    Oops.

    Jason C

  • How can I "automate" a question of a single line and response? the answer starts with the right margin and ending on the right margin as it is typed. The sequence would be: 1 type question 2. Tab at the right margin. 3 type the answer ending on the margin

    5.6.1 MacBook early 2015 OS X 10.11.3 pages

    Question: How can I easily format a series of "a line of questions / answers" (questions and answers on the same line.)

    How to easily create a long series of a single line of questions and answers to the question aligning it on the left and the end of the response by aligning right?

    For example

    !. Type the short question on the left margin.

    2. tab at the right margin.

    3. type the answer with the end of the answer on the right margin.

    Insert a right tab at the right margin.

    Peter

  • Regarding my "wordpad"... How can I change the right margin in my document?

    How can I change the right margin on my page when you type?

    How can I change the right margin on my page when you type?

    Open wordpad > look right > if your margin ends 5, there will be a pointer of less than 5 years > move the pointer (cursor) to the margin you want to implement.

    See screenshot...

  • I need to select all the blocks of text in a document and align text blocks in the back pages left frame margin and the text in the pages front to the right margin.

    Hello

    Am new to Java script.

    Can someone help me out here, I need to select all the blocks of text in a document and align text blocks in the pages back to the left margin frames and text in pages recto at the right margin.

    Thank you
    Harish

    Hi Harish,

    Try this.

    var doc =app.activeDocument,
        _pages = doc.pages;
    doc.viewPreferences.rulerOrigin = RulerOrigin.pageOrigin;
    for(var i =0;i<_pages.length;i++)
    {
            txfms = _pages[i].textFrames.everyItem().getElements();
            for(var j =0;j
    

    Kind regards

    Cognet

  • Problem with 'small black line at the right margin' with Folio Builder / Viewer to Adobe in the Ipad. ID CC.

    Hello

    When I create a Folio Builder and I check my project Id in the Adobe viewer (sometimes in the Ipad app and Desktop Viewer), I can see a black line at the right margin (maybe 4 px). And I can not set my background (it is an object with a color) to use the "full resolution available to the app in the ipad" and Yes, I'm using rules and I see that my object wallpaper is 1024 x 768. I tried several projects and upgraded the project for the "30" version

    But I am a new user with the ID/DPS. So, is this a bug reported? Or I'm doing sth wrong?

    And for me, the most important issue, will fix this when I send my project to the applestore and DPS transform my Folio to the store? Or what I see now that's what I'm going to see?

    Thank you!

    Sorry! I found an answer here in the discussion:

    http://forums.Adobe.com/message/5835960#5835960

    So the problem will be solved in the final application, and it's just the scrolling in the Viewer.

    Thank you!

  • Best way to game change Bars on the right margin

    I am a newbie to InDesign and need to assign change bars in the right margin. I have a two part question.

    First: looking at articles/tutorials that I found, I came to the conclusion that my best approach is to:

    1 create an object (rectangle)

    2. draw a line with the desired change bar properties

    3. cut and paste the subject line

    4 cut the object

    5. use object > anchored object > Insert to define the size and location of the object

    X = 5 a., aligned on the margin of page to width that contains the image negative (by example, - 45 p 0) of the

    5 b. Y = alingned initially

    Does this sound right? Are there ways of replacement or better?

    Second: I need a way to automate the above, so that it can be applied to many cases of change. I have the character style that marks each change in InDesign from InCopy. From what I've seen, it seems not that it will be too difficult to write a script (javascript) that made above for each occurrence of the character style, so automatically insert my change bar / anchored object in each place where it is needed.

    Does this sound right? Suggestions or references to existing scripts that do something like that?

    Thank you

    I find this script, "Vertical rules", by Peter Kahrel ( http://www.kahrel.plus.com/indesign/vertical_rules.html ) that provides the bar change I want as an object style anchored. I'm going to need to change his script in two ways to make it work as I want, but it's close:

    1. the bar must be applied according to the presence of a character specified in the paragraph style

    2. the bar must be in the right margin

    3. the bar should be only as large as the line that has been changed (not the whole paragraph)

  • OfficeJet 8600 Doc bac - line down the right margin when copy or scan

    I have officejet pro 8600 premium.

    When I print or scan from the document feeder, there is a line down the right side of the document printed or digitized, about an inch from the edge of the page.

    The line does not appear when I use the flat bed.

    He won't let a line from the original - just on the copy or scan when using the document feeder.

    It happens when I scan my computer or copy to the screen of the printer when using the document feeder.

    I just noticed the problem today.   It was working fine yesterday

    Thank you

    This means that there is a place (dirt or tinted), on the ADF scanner glass. Try to clean the glass of the scanner ADF with fluffy. The ADF scanner glass is on the left side, under the ADF.

  • HP envy 5530: printer Cup emails in width and loses 1/3 of the words on the right side

    When printing emails, 1/3 of the words from the inside of the right margin are cut and do not print.

    animal-lovers

    Welcome to the Community Forum of HP.

    Emails are tricky - and not all email clients are the same, neither are the browsers where you can print the email.  Almost anything could break the margins on the right side.

    Please take a look at the following and see if anything here helps - and you can also try opening your emails using another browser, too.  Yes, I know - eew.  But it might help to see what is happening.  In addition, it could give you an idea, if the problem is universal, i.e. emails look bad / feel bad no matter what you use.

    You might be able to use 'Fit to page' in print preview mode, or you might be able to control the margins by adjusting the actual "margins" - also in mode print preview.

    If all else fails, you may view the email and take a 'Snip' from the email, save it and then print the image you saved.  Ick.  But it could be something that you could use as a last resort.

    Manage the print with preview output before printing

    Click on the thumbs-up Kudos to say thank you!

    And... Click on accept as Solution when my answer provides a fix or a workaround!

    I am happy to provide assistance on behalf of HP. I do not work for HP.

  • I "lost" my screen about 1/2 in. on the right and about 1 inch down. Cannot find out how to get it "centered" on the monitor.

    I "lost" my screen about 1/2 in. in the right margin and about 1 inch down.  May not know how to get it "centered" back on the moitor?  Thank you.

    It is a desktop monitor and there controls on this subject? If so, this is what allows you to adjust the image. Good luck, Rick Rogers, aka "Crazy" - Microsoft MVP http://mvp.support.microsoft.com Windows help - www.rickrogers.org

  • error in the printing of the documents right margin

    Put WiFi in place: Asus TF300T/Hp e-print ap/Hp Photosmart 5520

    The e - pad delivers a correct document on the screen. After you have started the e-print ap and chose the preview

    alternative to the right margin of document has been modified; all the words cut vertically. Print gives the same result of course.

    It seems as if the e-print access point converts the secular side out. PSE advise.// Scanmar

    Scanmar SALVATION,

    Thank you for the updated information.  I appreciate it.

    I had to use my Samsung tablet as my ASUS Tablet didn't Polaris office installed on it and it requires a product key to install it. When I shared the document with HP ePrint app I still need the size of A4 paper in the ePrint application.  You check the settings of the application as well as Polaris ePrint?

  • Reference Dell 3100cn impression faded and white bands on the right side

    I have a Dell 3100cn that has about 3 years and I started to experience 2 lines of dots down the right side in each of the CMYK about 1 inch from the right margin.  With some additional impressions, points has continued and the right margin collapsed to some.  When he meets it, I inspected the original drum, which had 13 000 impressions color top and found a pattern of noticeable wear on the roll right where the points emerged, which is also in the middle of the faded area.

    Since then, I've replaced all 4 cartridges (no change) and the drum (this removed the points) and the points are gone, but faded on the right side are always present and sometimes introduce a little yellow toner into a stipe as well.  Any ideas what may be the cause - possibly a roller needs to be replaced?

    Here are some pictures of the problem: http://picasaweb.google.com/kerrylandis/Dell3100cn?feat=directlink

    Any help would be most appreciated.  Thank you!

    Kerry

    Did you clean the stuff off the coast of the new drum unit? There SCRATCHES, left on the drum, after that you do? If so, this drum unit is "toast".

    Once again, excellent photos. Nothing seems to be "demonstrably" false except for one thing... I noticed you are using 3rd party toner carts. In this model of printer, which is bad news. I'm sure they are cheaper, but in the long run, you'll end up paying a lot more to get your machine fixed.

    3 toners (in this printer class) do not have the same OEM toner xerographic properties. In your case, it seems as if the black toner from the black developer is agglutination at the drum, preventing all other colors to make an efficient transfer. You will need to replace all the 4 cpl developer and all 4 carts of toner (with original parts) just to be sure. Not cheap.

    By law, manufacturers of printers are prohibited by the "us clay Act and Sherman Act ' and the 'Canada competition law" and other laws of you ask to use their cartridges. That said, this Bill does not mean that OEMs are responsible for repairs when downgraded 3rd party or products are used in their machines. Also, this Act does not require manufacturers to share their toner formulation... usually a trade secret... with their competitors.

    Some manufacturers use special formulas for their toner. All 3xxx/5xxx series Dell COLOR laser printers fall into this category. IF 'other' toner is used in the machine and the machine is damaged, repair of that circumstance is NOT covered by your warranty. In other words, you will have to pay for the repairs until the machine is fixed, then, the machine is back on warranty. I know from personal experience that Dell has this policy.

    I know your warranty not on now... but it will cost you some $$ if you want to restore this machine perfect condition. More than $$ printer is interesting, but it's your decision. (you might think of parting with the machine on eBay)

    Personally, I no longer buy third party carts... NONE of the 3rd party resellers ask if they will guarantee repair of the printer costs if their product causes damage. If they say yes, ask in writing.

    Sorry I don't have better news for you.

  • The content appears to the right of the page div instead of inside.

    Hello

    I had a lot of frustration with it. Normally, everything seems perfect, except in Design view in dreamweaver, but well in the browsers and live view.

    It is produced only in two circumstances: 1) adding overflow: auto (which I commented out in the CSS), and 2.) now I want to add a table to the Center vertically words.

    You can see the problem in that pic. Sorry that the text is gray, but you must you 'Existence', written in the right margin and underlined by a red arrow (I added to the PS), when I want in the white central area.

    http://img411.imageshack.us/img411/1893/screenshot20101013at105.PNG

    Here is the code:

    HTML

    CSS

    Spry JS

    Spry CSS

    Any help with this problem of enfuriating would be wonderful.

    Thank you all.

    Add the following style rule in your document

    #content {}
    Clear: both;
    }

  • CM1415fnw burrs now along the right edge of the paper

    I have the above named printer.  I recently installed a new black ink cartridge.  It works fine, but recently I noticed some smearing and smudges of black ink along the right margin of the book, when I print the documents.  It does the same thing if I make a copy.

    Any ideas on how to fix this?

    There is a document to print quality for the CM1415fnw located here.

    Hope this helps to solve the problem.

  • Quality of rpint HP Laserjet color faded to the right of the page, toner cartridge the culprit

    Thus, a resolute quirk.

    My HP Laserjet 3800dtn produced pages in which the colors are washed out or did not go to the right margin.  Various associated software HP print diagnostic and diagnostics pages feel integrated, product pages with the same problem.  The colors on the right do not appear, but the black characters, text, graphic appears.

    At first, I thought it was the length of the USB cable, so I went to an Ethernet connection and run all the tests again and got the same results.

    So I took one of the toner cartridges and replaced by a new.  The same problem.  Then, and what a weird coincidence, I discovered that there are two somewhat 'heavy duty' springs on each side of the toner cartridge that works with the door (shadow) on the roller.   One of the springs was detached.  But it just not a not dislodge, because the position whereby the spring attached (a little nub) is broken.

    My conclusion is that the door opened only partially, and therefore the toner is never properly transferred to one side.

    Maybe I broke the node with some brutal manipulations, maybe a new one was defective, that it is I got two defective cartridges.

    However, not wanting to throw a + $100 cartridge, I stuck the spring and post and allowed him to dry overnight.

    Reinserted the fixed cartridge and everything of fine.

    Just sharing.

    An update more.

    Among the repaired 'bumps' failed.

    So I heated a thin nail, and he passed through the plastic in the area where the 'essential' existed.

    The, using fine wires, I threaded the wire through the hole of very small diameter and attached to spring for the plastic.

    Yes, success... another cartridge saved from an ignominious early elimination.

Maybe you are looking for