The WVC54GC killed V1.1 Firmware update!

Similar Questions

• Not compatible with the selected drive - Satellite A300D firmware update

  Hi, I have a problem with the update of the firmware. When I try it says "the Firmware is not compatible with the selected driver.

  And another problem is that my dvd drive does not DVD - R and DvD + R is running very slow and big trouble, it must try several times to succeed.

  Please help me.

  Hello

  Maybe you should tell us what CD/DVD drive you have and where you have downloaded the update of the firmware.
  In my opinion firmware update is not normally necessary.

  Have you ever tried to remove upper and lower filters in the registry? This often solves problems with ODD.

• Cannot connect to the ix2 Lenovo after the 4.1.202.33573 firmware update

  Hello, I've updated firmware for 4.1.202.33573 (the previous was 4.1.106.31982) and after that, I can not connect my Lenovo ix2 using different web browsers. After you type the user name and password and clicking "login" nothing happens for 1 + hour but appears only "processing...". "message on background greyed. After more than an hour of "processing...". "it appears the error message:" impossible (get/read) asked for information "(excuse me risk of errors in the translation of Polish messages in English). After updating firmware also the power and reset buttons stopped working. By pressing or holding the button market / stop has no effect as pressing reset with a PIN. To restart the unit I had to disconnect the power supply and connect again, but also had no effect on connection problems and buttons. Evolution of the browser has no effect. Despite these problems of storage is available - I can connect a network drive, copy files from and to the storage. Is it possible to go back to the previous version of firmware that worked properly for a long time wihout via web interface? -Cordially - Maciek

  Read this post to see if it helps:https://forums.lenovo.com/t5/Lenovo-Network-Storage/Lenovo-iOmega-ix2-Login-and-Printer-problems-aft...

• The Dell Inspiron 13 5368 Firmware updates

  I am trying to update my firmware on my laptop, but every time I open the .exe file and extract it, it opens to it. If I try to do something that I am invited to a password.

  

  Update the firmware in the Device Manager...

  

• The SuperMulti Drive KS06 GT30N Firmware update version! Having a problem...

  Having a problem with my laptop DVD - player...

  Laptop Sony Vaio Vpceb26fg ( http://www.sony.co.in/product/vpceb26fg?tabName=specifications )
  When I update my firmware of DVD player, it says "device valid ATAPI can not be found! "F/W model is DVDRAM GT30N "
  Someone please help...
  Thank you.

  Such problems are specific Sony, see their help/support pages or the Sony Forums.

  MS Does not produce firmware

• Colorlaserjet 2605dn: killed 2605dn printer firmware update

  After what appeared to be the latest firmware 2605dn successfully installed, printer seems dead.  I get no lights (pwr) and no display on the LCD screen after power on.  I do not hear the usual audible indication that the printer starts up but no visual and the printer is now useless.  I tried to reload etc. but there is no such thing as no communication with the printer!  Any help would be greatly appreciated.

  Perry

  Thanks for the reply.  Checked as you suggested and will then attempt the trainer!

• The Firmware Update (Sansa clip 2 GB) support

  While he was trying to transfer my cell phone to my Sansa Clip audiobook, I get the following error during the file transfer:

  ""It is not possible to obtain the certificate of the device. " Contact the device manufacturer for a firmware update or other measures to address this problem. » » »

  When I try to down load the latest Sansa firmware using the "Sansa Updater 1.2 ' version, I get the following error:"

  «"" The following error has occurred: cannot download the selected files.»»» Please try again later. » » »

  I currently wear farm: 1.01.11 on my Sansa Clip (2.0 GB)

  Can offer you any advice on the correction of such? A firmware update will solve the problem of certificate? Any help would be appreciated...

  DLR

  There is a message at the top of this map with instructions for a manual update. use that to update the firmware, and then in the settings menu use the format command. Try once's done it charging books.

• The HP DesignJet T520 firmware update

  Hello

  I have a HP Designjet T520 and I'm trying to update the firmware on the printer.

  The printer is currently connected to our print through our network server

  The aim Guide do the following:

  Using the integrated Web server, select Firmware update

  Although, when I connect to the web server, I don't see the update of the Firmware.

  Can someone tell me where is this info?

  Thank you

  René

  Hi ReneMenard,

  The Designjet is a commercial product.  I you a link towards the Designjet forums try to repost your question here for better coverage.

  Designjet Forums

• 40L3455DB - not able to access services online after firmware update

  After an update of firmware for my 40L3455DB, I was not able to access online services

  I have contacted the online support, but have no joy, and they say they're looking for him

  what lasts for 2 months

  has anyone else had this kind of problem

  I had also the message on my Toshi firmware update is available, but somehow, I can't install because for now everything works OK and I'm happy with it.
  I would like to know if you can temporary fix it if go back you to the factory settings.

  What do you think about this?

• Designjet 920F: 920e designjet firmware update

  I need to install an update of firmware for my Designjet 920F which is NOT on a network or on the cloud.

  I downloaded the new file on a single computer and loaded to the stand-alone computer.

  Now what?

  With the help of a USB key. Download the firmware from http://www.hp.com/go/T920/firmware , http://www.hp.com/go/T1500/firmware , http://www.hp.com/go/T2500/firmware , or http://www.hp.com/go/T3500/firmware file (depending on your printer model) into the USB flash drive and insert it into the USB Hi-Speed host port in the façade. A firmware update wizard appears on the front panel to guide you through the update process.

  Of course, if you have already downloaded a flash drive, you can omit that part.

• Wan interrupts the connection after the firmware update

  Looks like the latest firmware upgrade is the source of the problems.

  I've just updated my timecapsule 1 TB of first generation version 7.6.7 and my 3 TB timecapsule new version 7.7.7

  Both are connected to the router of the provider of Internet services and extend the network even in my house.

  WiFi is stable until the upgrade, but now the connection is lost every few minutes or seconds.

  Both versions are later to the respective timecapsules.

  I end up having to downgrade if no solution is found.

  I powered the two market still nothing does not. Redefine the network and tried both hidden and not hidden, yet once nothing doesn't.

  Any ideas on what is causing the problem?

  Well, since nobody seems to have an explanation, and Apple are not out with firmware update after 7.7.7 and 7.6.7 I decided to downgrade the firmware to the previous version. I now run version 7.7.3 on the new 3 Tb Time Capsule and 7.6.3 on the 1st Gen Time Capsule. So far, the network is stable. Using WiFi Explorer Ii see that they use channel 6 and 8 respectively. Signal is strong and no dropouts have taken place so far. Hope the issue is resolved in the next firmware update.

  As I read in another post: firmware update does not solve a problem, you didn't. However, it can create a problem that you didn't.

• TimeCapsule downgrades WiFi 2.4 GHz after applying the firmware update v7.6.7

  After applying the firmware update v7.6.7 free WiFi to TimeCapsule is now 2.4 Ghz instead of 5 Ghz.

  It was the update of the firmware with certainty that has made this... no doubt about it:

  • My mouse bluetooth interference notice when my MacBook is connected to WiFi 2.4 Ghz;
  • Before the update, everything is OK
  • After updating, my mouse mouse start jittering
  • < alt-click > WiFi icon in the menu bar confirms: the connection is now 2.4 Ghz

  Restart to e TM Mo doesn't change anything.

  In the TC WiFI options tried to put another name to the network successfully, but only 5 GHz can not connect to it: timeout error every time.

  Tried the hard reset of TC and reconfigure the WiFi... the same result, but with a difference:

  • Setting an SSID separated for 5 GHz connection (in the WiFi options) has now created a network I can access.
  • However, this is not the best solution... I don't want 2 SSID.

  It is not the first time Apple breaks things with updates... and I see people move away from Apple to this kind of situations.

  I also had bad experiences with OS updates lately and postpone the as much as possible.

  The problem is that I can't go back... or can I?

  Any help is welcome.

  THX

  The problem is that I can't go back... or can I?

  Of course, you can, but it may or may not help.

  Open AirPort Utility

  Click on the image of the AirPort base station

  Hold down the option key on your Mac while you click on the version number of the firmware

  A drop down menu appears

  Choose the version of the firmware you want to use

• New Firmware Update - where is the change log?

  I see that a firmware update was sent to my phone. However I can't find a change log. Where is it?

  Hello!

  HP and Microsoft has released an update (online) of the OTA for the X 3 elite on October 25, 2016. The update installs Windows Mobile 10 for the following versions:

  Firmware revision: 0002.0000.0014.0100

  Build of the OS: 10.0.14393.321

  Bootloader Version: 520101

  New features:

  Area	Description
  Display	High brightness Mode is activated when the brightness adjustment is suggested by default.
  Security	Reset functionality is enabled. However, the existing user must reflash phone with this software with Windows Device Recovery Tool (WDRT).

  The issues addressed (Items with * are fixed by OS updates):

  Area	Description
  Apps	App Instagram, have green lines during use is fixed.
  	Launch of view inconsistent HP on docking tools is fixed.
  Audio	Detection of the helmet is not reliable is fixed.
  Camera	Auto focus performance and stability in low light conditions are improved.
  	Model tapes preview screen is fixed.
  	Video recording after that tap put in pause/resume many times received message 'something went wrong' is fixed.
  Security	Blue BitLocker Recovery screen on reboot with active device encryption is fixed.
  User interface	Tap to wake up the wrong feature turn off screen is fixed.
  Hello Windows	IRIS is unblock, followed by sweeping to unlock quickly led to the prompt error is fixed.
  	Fingerprints and Iris being setup one after the other, one of them will not functional, is fixed. **

  Known issues:

  Area	Description
  Apps	Skype for business app can be run from external display of Continuum.
  Connectivity	Dock desktop LAN port of HP has no configuration of the user interface.
  User interface	Missing tiles with update settings. The user can go to the list of applications, press the settings icon and select PIN to start restoring the tile.
  	Tile 2 Messaging becomes white with update. Touch on the tile once it restores.
  Security	Too many failed unlock attempts, the device will be blocked for security reasons. User can unlock the unit to https://account.microsoft.com/devices.

  Thank you

• Satellite Pro A200 error (PSAE4E) during the firmware update Disc Creator

  Hello

  I get the following errors when you try to update firmware for Disc Creator I use Windows VIsta Home Premium.

  An unexpected error has occurred.
  Error code: 32007C-26-00000015

  Followed by:
  Error code: 320129-26-00000015 - then application goes down.

  All solutions to this
  Thank you

  Hi guys

  I'm a bit confused of m.

  > when you try to update firmware for Disc Creator
  Where did you get the firmware update for Toshiba Disc Creator?

  I checked the page European driver Toshiba and Satellite Pro A200 (PSAE4E) download area and, unfortunately, I didn t find updates for Toshiba Disc Creator.

  So I really wonder about this problem. He s strange

• After 32RL933 the firmware update won't start no - green LED lights

  After an update of the firmware via wifi and use the TV for a few hours, when I changed the Source, the TV goes black and reboot, right now the TV is always black, green LED flashing and the screen turns black.

  I think it's a firmware issue, I tried to pull the plug and put back in operation and does not. I have donwloaded a rl933_748304.bin firmware on the site, loaded onto usb and plugged into the TV and does not work, so I think I need a "auto-install" firmware that runs at the start of the TV instead a normal firmware.

  I've read that a lot of people have this problem, I hope that you could give me support.

  Thanks in advance and sorry for my English.

  Try this:
  Turning the TV off. Wait 30 seconds, then press power button.
  Then OFF it again. Unplug the power cable and LAN cable.
  Reconnect the cable LAN and power ON the TV.
  Now reset the TV.
  GO to the system configuration menu, select TV point Reset and press OK to select.