The Y580 there an mSATA II or III mSATA?
Basically, I'm looking to move the mSATA SSD 16 GB in my y580 to a 128 GB one so I can install Windows and other top programs to run faster all by having the 1 TB 5400 RPM HARD drive for everything else. I was just wondering, the Y580 supports speeds mSATA III? and if not, what mSATA SSD speed is it supported? Also of the suggestions or recommendations what mSATA SSD I should get. Thanks in andvance ():
It is SATA III, but after I put Mushkin mSATA III 120 GB of disk, the faster, I could never see in HD Tunes was 270 MB/s with an average of 236 mb/s, however ATTO benchmark showed 550 MB/sec 256 kb + pieces:
PS you will probably have to reinstall Windows from scratch (and I don't think it would be illegal for download us .iso from unofficial places, since we already bought with the laptop and Lenovo could not provide us with an ability to create backup diskettes)
Tags: Lenovo Notebooks
Similar Questions
-
ENVY 750 - 055xt: screw the motherboard for socket mSATA
I have the HP ENVY 750-055xt, which uses the motherboard of Kaili. There is a plug on the motherboard mSATA and I inserted an EVO of 850 Samsung 1 TB SSD. Fortunately this solid state drive works and is immediately recognized by Windows 7, no other frills. However, the motherboard doesn't have the small screws in the tiny mSATA solid drive on the motherboard.
Anyone know the right screw size used to secure the mSATA SSD to the motherboard in Kaili?
Hi Big_Dave,
Thanks for your reply. I have besides a picture of the Samsung 850 EVO mSATA SSD drive.
It fits in the slot on my motherboard HP MS-7826 (Kaili) mSATA. Please see below.
The drive performs as well as my boot drive. As it is not properly attached to the motherboard, the only thing holding is the strength of tensioning of the socket. Ocassion the tiny jury comes off in the socket and it won't be visible in the path of startup. Opening upward the chasis LIKE 750 and re - insert the mSATA jury will get the computer running again. The little screw would prevent the Council of Regularisez making and the frustration of re-Foundation there.
Elsewhere in this forum, I found mention of the screw that I'm looking. This is the same as that used in the dwelling of minimap express PCI used for the WiFi card. The expertise here source describes the machine screws Flathead as a M1.6 size. I ordered a M1.6 x 3 mm of China. I think it should work. Some here said they used a M2.0 to head flat screws in the slot mSATA and it seemed to work for them.
My motherboard HP isn't a slot m2. If so, then I probably would have opted for the Samsung SSD m2, instead of the mSATA SSD drive.
For now, I think I solved the problem with the mother screw missing for the location of nSATA. Nevertheless, Big_Dave, thanks for responding to me here.
-
Confused about the connectors SATA and mSATA on x230t
I recently ordered a X230T and I am looking to buy SSDS mSATA and SATA slots. I've seen conflicting information on the SATA slots and mSATA. Can we say definitively if slots are SATA II or SATA III
Thank you
"evening.
Welcome to the community!
The main Bay is SATA III, while the mSATA mPCIe interface is SATA II.
See you soon.
-
Where are the options of the trackpad in Sierra OS? In El Capitan the trackpad there NO light tap (ENTER) and just one click HARD (ENTER) and could move the cursor.
System Preferences > Trackpad!
-
control of fascist style of addons is a bad thing and prevents from getting the modules there are out there of dev.
This will be only stifle creativity and prevent new addons are made.
Said heavyoak
control of fascist style of addons is a bad thing and prevents from getting the modules there are out there of dev.
This will be only stifle creativity and prevent new addons are made.
How is that what does strike you?
https://blog.Mozilla.org/addons/2015/08/21/the-future-of-developing-Firefox-Add-ons/«We are implementing a new extension API, called WebExtensions...» »
The infrastructure of the current extensions will be gone and with it will have the advantage of current extensibility that Firefox had more Chrome and Opera. Kinda like the rating "fascism" for "communism".
So at the end of next year we can be moaning about something much bigger than the current "signature" minor schism or "bump in the road."
-
My new book mac early 2015, battery finish and get off. When I put the charger there is no charge light? I have reset the SMC, but nothing happens.
You can try another charger?
Also-
- Press the Option button and click it - system info - Power - post what is shown on the battery please
-
Not able to install Itunes for my pc windows7 (64 bit) im... Every time I have install I get the message "there is a PROBLEM WITH CE PACKAGE WINDOWS INSTALLER. A DLL REQUIRED FOR THIS FULL INSTALLATION COULD NOT BE EXECUTED. PLEASE CONTACT THE SUPPORT STAFF. "What should I do? I am new to Iphone! If you could help me on this, it would be very appreciated...
aarruunn, you might want to try Windows Installer Cleanup utility.
http://www.MajorGeeks.com/files/details/windows_installer_cleanup_utility.html
-
HP Officejet 6600 Guard giving the message there is a problem with the printer or the ink
HP Officejet 6600 Guard giving the message there is a problem with the printer or ink. We have already tried to turn off then, have you tried unpluging and nothing works
OK so I solved my problem normally my printer tells me what was low on ink im although there no and homesick, that I had to replace an ink catrige and his works now
-
Boot from the DVD or USB on the Y580?
Can someone tell me if it is possible to boot from the CD/DVD or USB on the Lenovo Y580?
Thank you, Dave.
in the y580 bios supports usb 3.0.
you have the USB is connected before starting, right?
-
I can not print anything because the print queue think there is something stuck in there, but there isn't. The small printer icon appears at the bottom of my screen showing the existence of an item in the print queue. When you actually open the print queue to the top, there's nothing there. I tried to stop the printer spooler and restart it but that has not worked. I use a HP Photosmart C5180 series. If anyone has any ideas how to help me I would appreciate it a lot. Thank you
Hi Julie,.
The operating system you have installed on the computer?
See the articles:
Unable to print? Print jobs are stuck in the print queue
http://h10025.www1.HP.com/ewfrf/wc/document?cc=us&LC=en&DLC=en&docName=c02205477
Solve printer problems
Note: Please select the operating system in the right corner and solve the problem.
Let us know if you have other questions about Windows in the future.
-
My Media Player is not let him come his pass. I tired FixIt and followed all the links there and I still can't get media player to read suggestions?
original title: Windows Audio recordingHello
(1) what version of the Windows operating system is installed on your computer?
(2) did you of recent changes to the computer before the show?
(3) what is the file format of the files you are trying to play?
(4) you get an error message?
(5) you are able to hear the sound of Windows and other applications?
(6) that Microsoft Fixit ran?
You can try the following methods and check if it helps.
Method 1: No sound in Windows
http://Windows.Microsoft.com/en-us/Windows/help/no-sound-in-WindowsMethod 2: Problems running Windows Media Player
Open the troubleshooting Windows Media Player settings Troubleshooter by clicking the Start button, then Control Panel. In the search box, type Troubleshooting, and then click Troubleshooting. Click view all, and then click the Windows Media Player settings.
See this link:
http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-settings-Troubleshooter
Method 3: Solving problems run Windows Media Player library
http://Windows.Microsoft.com/en-us/Windows7/open-the-Windows-Media-Player-library-Troubleshooter
-
During defragmentation receive the message "There is a"VALORISATION"fragmented 1%"
During defragmentation - there is a "VALORISATION" fragmented to 1%. How can I resolve this issue. Can I have an answer on "* address email is removed from the privacy *." -Thanks for your reply.
B.Michel Duffy
* removed *.
* original title - during the defragmentation - there is a "VALUATION" fragmented to 1%. How can I resolve this issue. Can I have an answer on "* address email is removed from the privacy *." -Thanks for your answer.*
Hello
· When you get this error message?
I suggest try to Defrag in safe mode, follow these:
a. restart your computer if it is running.
b. press the F8 key after your computer powers initially.
c. Once you see the menu Options Advanced, boot you can stop tapping.
d. use the up/down arrow keys to highlight your selection.
e. select Safe Mode and press ENTER.
f. you should see loading drivers and wait please.
g. you should then be at the Welcome screen.
h. connect to your computer using an account with administrator privileges.
I hope this helps.
-
Original title: IPOD
When I plug my IPOD to the computer, there is no indication of a detected device or in ITunes there is no "peripheral" in the sidebar.
Any ideas?Hello
1. were you able to use the IPod even without any problem before?
2 have you made changes on the computer before this problem?
3 have you tried plugging it into different USB ports and check?
4. are you able to use other USB devices on the computer?
5. have you try to use the IPod even on check and another computer?
6. what operating system do you use?Answering these questions could help us help you better.
Run the following article fixit tool and check.
Hardware devices do not work or are not detected in Windows
http://support.Microsoft.com/mats/hardware_device_problems/ -
Why for the answer, there was no attachment?
Why for the answer, there was no attachment?
Most e-mail programs do store attachment for a response. It is not necessary since the sender knows already what was the attachment.
If you want to share the e-mail program you use with us, perhaps we can offer options.
-
I bought Halo 2 for Vista, but who like OS Windows XP Pro, just can't launch the startup.exe, I search the community, there is a rumor that it won't work even with the patch. Can someone help, please?
Unfortunately, Halo 2 does support Windows Vista and more. Windows XP is not supported. There may be 3 party hacks that can make it work, but they are not taken in charge and potentially dangerous.
Paul Smith - MVP for Windows desktop experience... I crawled off NNTP - for now. Detachment Aldershot, United Kingdom. On the internet at windowsresource.net and dasmirnov.net. Please post back to let us know what works and what does not. :-)
Maybe you are looking for
-
Plug-ins have been disabled
-
FPGA connect for compiling the server
Hi all I'm just trying to write my code for my Spartan 3 FPGA. I was moved to another computer so I tried to install the right tools... LabView 2010, the module, LabView FPGA 2010 so that the pilot of the Commission of the Spartan Xlinix I use. Windo
-
I have a pantech breeze 111 tm
It does not have my phone I have a pantech breeze I want to face pictuer
-
Original title: screen I plugged my comp. to my t.v. screen to use as a monitor worked fine for long time, now it's half, it was because of a black line on each side of the screen, he disobeys when I spend watching the t.v. If anyone can help please
-
I use a Dell Dimension E310 PC running Windows XP Media Center Edition. The CD/DVD drive has stopped recognizing CD long ago. (He still recognizes DVD but not CD). I use an external drive to CD/DVD of Asus. I keep getting messages that Windows ne