Their is something stuck on my port of lightning and cable does not fit on my phone solutions please?

Similar Questions

• HP - 15 af008ax: my new laptop usb port for the left side does not, only 1 work on 3 Please help me

  My new laptop usb port for the left side does not, only 1 work on 3 Please help me

  Hello:

  Have you installed the drivers for W7 32 bit amd chipset?

  If this isn't the case, you must install them and reboot the PC to get the 3 for usb ports work.

  You want the first file on the Web page.

  http://support.AMD.com/en-us/download/chipset?OS=Windows%207%20-%2032

• Combo eSATA/USB3.0 T510i port: eSATA Cable does not fit

  Hello

  My T510i has a combo eSATA/USB3 port. I guess an eSATA must fit it. But the eSATA cable, I bought does not fit. (It fits into my external hard drive eSATA port, however.)

  Can you help me with this, please?

  Thank you very much in advance!

  Ben

  
  

• Cable Thunderbolt does not fit into the Thunderbolt ports in my iMac mid-2011

  I have a Mac Mini (purchased in early 2015) I want to fix it up to use at work. I need to reformat home using my iMac (mid 2011) as screen and then copy all files and applications from the iMac to the Mac Mini. Both have ports Thunderbolt. So I bought a Thunderbolt cable from a third party (!) and I'm baffled... the cable, both ends, is part of the Mac Mini but does not fit (either end, either the port, there are 2) in the iMac, no matter how hard I jiggle it. It is not the cable... but I'm confused as to how the TWO ports on my iMac could be wasted. Believe it or not, I have never tried to use before. PS., they are certainly the Thunderbolt ports, with the lightning bolt symbol bit.

  1A everyone has ever encountered this? All my other ports work fine.

  2. is there another way to target display mode in addition to crush on both machines? I found this article: use your iMac as a display with the target - Apple Support Display Mode and it seems that I can use only Thunderbolt, but I wanted to make sure.

  Have you tried to return to the end of the cable? Don't be offended, it's happened.

• One of the USB devices attached to this computer has malfunctioned and Windows does not recognize it. The location is the root (2 ports) USB hub: 1-unknown device and Port 2-not used

  Original title: USB device not recognized

  Over the last 2 weeks, I get a message on a USB device.  The message said that one of the USB devices attached to this computer has malfunctioned and Windows does not recognize it.  The location is the root (2 ports) USB hub: 1-unknown device and 2-unused Port.  I have no idea what it means.  I hesitated to first click the icon (it does not last very long) thinking it could be a scam.  Can someone help me?  Thank you.

  Hello

  (1) is the specific question of specific USB devices?
  (2) did you of recent changes to the computer before the show?
  (3) have you tried plugging the USB stick on another computer?

  (4) what is the brand and model of the computer?

  I suggest to refer to the following methods and check if it helps to solve the problem.

  Method 1: Hardware devices do not work or are not detected in Windows

  Run Microsoft Fixit mentioned in the article.

  http://support.Microsoft.com/mats/hardware_device_problems/en-us

  Method 2: USB Port may stop working after you remove or insert a USB device

  http://support.Microsoft.com/kb/817900

  Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base: 322756 How to back up and restore the registry in Windows

  Reference:--

  Advanced troubleshooting tips for General USB for Windows XP problems: http://support.microsoft.com/kb/310575

• HP 15-g013dx: ports USB 2.0 and devices does not downgrade from Windows 7

  Hi all

  I'm trying to downgrade a 15-g013dx (J5T33UA) computer laptop HP Windows 8.1 to Windows 7. It is a four-core AMD A8 APU system.

  I have problems with the devices USB 2.0 not supported by the hardware.  I have all devices in Device Manager, but the computer does not detect the USB 2.0 devices.

  He will recognize USB 3.0 devices very well when they are plugged into the USB 3.0, but no USB 2.0 ports. Peripheral USB 2.0 do not work in any port.  I can't confirm the devices USB 1.1 at this time.

  CMOS configuration is set in Legacy mode: disable.

  Is there an additional driver or configuration that I am missing, or is there something else going on?

  Thanks in advance!

  @OtakuN3rd ,

  Hello and thanks for the display on the HP support forums.  If you want to downgrade your system to Windows 7, you'll want to download the drivers and software supported first.

  Here is the link to your drivers and support systems.

  Drivers for laptop PC HP 15-g013dx

  To make sure you material works you want to install your drivers starting with the chipset driver before all others.

  For windows 7, you'll want to check out this link as well.

  UEFI boot or legacy - tips

  If you follow that you should have no problem.

  If your USB 2.0 ports are still have a problem then contact support phone for repair options.

  Please contact our technical support at the 800-474-6836. If you do not live in the United States / Canada region, please click the link below to get help from your region number. http://WWW8.HP.com/us/en/contact-HP/WW-phone-assist.html

  Thanks again for posting and have a nice day

• External port eSATA Studio XPS 9100 does not

  Hi all

  I have a Dell Studio XPS 9100and external eSATA port does not work or it is not detected. I have a Seagate FreeAgent external drive and it can't detected, and it is NOT power up when I plug it into the eSATA port. The FreeAgent drive works fine as it is detected on my laptop Dell Studio XPS 1645eSATA port. The drive is detected on the 9100 when I use the USB cable to the drive (plugged into a USB port, of course).

  I tried to do some research online and some suggestions were to activate via the BIOS eSATA port, but the eSATA port is enabled in the BIOS. The wrong driver is installed on the device? I see the Intel ICH10 Family 6 Port SATA AHCI Controller-3 has 22 in the Device Manager. Is this the right driver to recognize the external eSATA port or is there something else wrong with the 9100?

  Does anyone think that the external eSATA port requires an external drive with its own power supply? The 9100 is a 2010 model year environment, but I think it should not require a player with an external power supply.

  Thank you in advance for your help!

  Hi all

  I grabbed an eSATA disk that has its own power supply (AC adapter) and trendy source on eSATA back port and he recognized the car.

  It seems that the Dell Studio XPS 9100 has of an old eSATA port requiring a drive eSATA that she is clean in order to be energy source active on its external eSATA port. If you try to use a disk without its own power supply eSATA it won't work because the former eSATA ports enabling the way as the USB ports and the new USB ports hybrid eSATA . My laptop Dell Studio XPS 1645 a hybrid one of these ports so apparently it is why my Seagate FreeAgent working on it and NOT on the 9100 desktop. You can't plug a USB cable in the 9100 eSATA port certainly isn't a hybrid eSATA port.

  I guess I solved my own question.

• Satellite L300-1DN: brocken USB ports - PCMCIA USB card does not fit

  My granddaughter broke the USB ports leaving the dongle and it banging as she wore the portable peasantry.
  We advised me to buy a Belkin USB 2.0 notebook card and slide it into the slot on the side of the laptop but it does not seem appropriate.
  I am a novice in computers and would welcome that any help however basic.

  Eric

  Hello

  Satellite L300-1DN was equipped with the EXPRESS CARD slot.
  You can use the ExpressCard/54 card.

  Have a look here on the Wikipedia page:
  http://en.Wikipedia.org/wiki/ExpressCard

  Welcome them

• External USB HDD cable does not match of Satellite A200 USB ports

  I bought a new Notebook from Toshiba A200 Satellite and a 500 GB Maxtor One Touch 4 500 GB hard drive.
  The end of the USB cable to the HARD drive does not match one of the ports on the Toshiba.

  Can I get an adapter, or try to find a rope?
  HARD drive uses USB 1.1, 2.0 or Firewire port.

  Thank you!

  What?

  Sorry, but I don't believe that.
  The Satellite A200 supports USB 2.0 ports Commons and it should be possible to connect a normal USB cable to the laptop!

  Are you sure you are using the right cable to 100%?

  It should looks like this:

  [USB 2.0 cable | http://upload.wikimedia.org/wikipedia/commons/e/e6/USB_TypeA_Plug.JPG]

  and these are typical USB ports:

  [USB 2.0 port | http://upload.wikimedia.org/wikipedia/en/8/84/USB_Connector.jpg]

• HP touchsmart 520: usb ports hp touchsmart 520 side does not

  usb ports side Device Manager does not tell all the works, but nothing picks up, but ports usb back all work

  Greetings @idwer16.

  Welcome to the Forums of HP Support! It's a good place to find the help you need, other users, the HP experts and other members of the support staff. I understand that some USB ports do not work on your system. I'm happy to help you with this. As a start, please report the number of complete product for your computer. Check out the following, if you need assistance with this information. How can I find my model number or product number?

  The side ports worked before?

  Are the version of USB ports on the side of 2.0 or 3.0 on your model?

  Have you tried updating the drivers on your computer? If this is not the case, the HP Support Assistant could help with this. On most models done component USB on board chip set drivers.

  HP computers - using HP Support Assistant (Windows 10, 8, 7)
  HP PC - troubleshooting HP Support Assistant (Windows 7)

  Another document that could help may be Computers HP - troubleshooting USB (Windows 7) connections.

  Please let me know if none of this works for you and if it does not solve your problem, please mark this message as a solution. Bravo would be appreciated as well.

• HP 15-R150SA: usbs does not fit into the usb ports

  There are 2 usb ports on my laptop, but none of them made any keys usb or connectors I have made another evey machine I used, what I need to use some sort of adapter?

  Here is the Manual:

  Manual

  Pages 6 and 7 show all ports. Referring to all the photos and figures tell us what ports your devices usb might not fit into. It of "universal serial bus" and is supposed to be just that... universal.

• I have adobeXI stuck in limbo in my computer. I can't uninstall it or install any new version, and adobe does not work properly. What can I do?

  Adobe XI is stuck in limbo on my computer and I can't uninstall it or install update for adobe systems. What can I do to get rid of this one and install a update or at least a version I can use?

  Hi maggieg30085397,

  If you're on windows computer try uninstall using this cleaner tool Download Adobe Reader and Acrobat tool - Adobe Labs.

  Reboot your system and install the latest version using this link Adobe - Adobe Acrobat Reader DC Distribution.

  I would like to know if it works.

  Kind regards

  Nicos

• Serial port under guest operating system does not work

  Running VMWare Workstation 7.1.3 on win 7-64 bit. Guest operating system is win 7 32 AND Windows XP (32 bit). I followed the instructions on connecting to the host serial port. However, there is no access to serial port a guest OS. Serial Port sniffer running on the host shows NO ACTIVITY on the port operating system serial host.

  Even serial device, attached and if running on the host works very well.

  Any ideas?

  Steve

  I doubt that the documentation is correct for what is with VMplayer 3 on Windows TGV serial ports is.
  Read my notes http://faq.sanbarrow.com/index.php?solution_id=1007

  I removed the option of thinprint and reconfigured the serial port in the vmx file attached.

  Turn off the virtual machine and replace the existing by the attached vmx file.
  Then try again

  If it still does not - change
  Serial0.yieldOnMsrRead = "FALSE".
  TO
  Serial0.yieldOnMsrRead = 'true '.

• Firefox started pushing advertising - when I click on a page, a different page ocmes to sell something. I'll pass the browsers if she does not stop

  Sometimes I click on something, and the link opens a page completely different advertising something. If I click on the arrow to the left and click again, it opens with the exact link.

  Hello

  The reset Firefox feature can solve a lot of problems in restaurant Firefox to its factory default condition while saving your vital information.
  Note: This will make you lose all the Extensions, open Web sites and preferences.

  To reset Firefox, perform the following steps:

  1. Go to Firefox > help > troubleshooting information.
  2. Click on the button 'Reset Firefox'.
  3. Firefox will close and reset. After Firefox is finished, it will display a window with the imported information. Click Finish.
  4. Firefox opens with all the default settings applied.

  Information can be found in the article Firefox Refresh - reset the settings and Add-ons .

  This solve your problems? Please report to us!

  Thank you.

• Audio port Ultra Dock docking station does not

  I have a laptop ThinkPad X 240 with Windows Enterprise 8.1 x 64 installed. His plays very well from the speakers of the laptop, and when I plug in external speakers on the computer portable 3.5 mm audio port, they work very well also.

  But... when the phone is rooted in my Ultra Dock 90W docking station and external speaker cable is plugged into the dock's audio port, there is no sound. If I play music through the laptop speakers, as soon as I plug a cable into the audio port dock, no sound is produced. I can still use the laptop's audio port to connect external speakers, but that defeats the purpose of having an audio port on the Dock Ultra.

  Dock Ultra has (I think) the latest firmware installed (version 2.22.000) and I have the latest audio drivers installed: in Device Manager > sound, video and game controllers > Realtek High Definition Audio > driver version is 6.0.1.7188 which is the last available Lenovo support downloads.

  What should I do to get the Ultra audio port Dock works?

  Kind regards

  / Neil

  PS. apologies - I have wrong posted this message on the map "of tablet computers laptop ThinkPad X series. A moderator can you please remove the post of this Council?

  Hi Nwgarside,

  Welcome to Lenovo Community!

  According to the request, we understand that you are facing problem with Audio only works not the Ultra docking with your ThinkPad X 240.

  Did you check different system with docking station / Ultra?

  Check with the ThinkVantage System Update tool, running so that it will update all the required drivers and application of your system.

  I hope this helps.

  Best regards

  Agnes Kumar