There are not enough licenses installed to run the operation
Help.
I have installed SRM and Setup. I reproduced volumes and everything looked good. Only, I went to perform a test well and received the following error message:
"There are enough licenses installed to run the operation.
SRM is approved on the my protected site (a little too much actually licensed) but it is showing as "expired" on my site of DR. I guess it was running an eval license. It's a little confusing because I understood that only the protected site needs a license, not the protection site so I don't know what to do here.
The Administrator's guide seems to propose to add a key (the?) on both sites? For that, the conditions of licence of cylinder head no?
I'm sure you need SRM under license on both sides.
-MattG
If you find this information useful, please give points to "correct" or "useful".
Tags: VMware
Similar Questions
-
Hey.
Have installed VMware Server on my windows server 2003 64-bit want to give it a go...
The server itself is a Dell Vostro 410 with a Quad Core cpu and 8 GB of ram.
Im getting the error "There are not enough licenses installed to run the operation." after passing by the web wizard and make a virtual machine and try to start.
When I click on the link ' power on ' this message appears as the error immediately detailed.
The server runs a student version of windows serv licensed 2003 (if that makes a diff).
I want to install Suse Linux 32
By Googling I found im not the only one getting this error, but I couldent find all the solutions related to this and not of ESXi.
Hope, one of the yall know what happens
Thank you
CJ
Try to install the downloaded file with the serialnumer you get!
-
Hi all:
I added two esx servers in my vc received the error: there is not enough licnese installed to run the operation.
There are some servers esx with correct license file in VI3.5U3 in my environment. I want to add more than two servers esx with evaluation mode in this virtual Center. I got error.
connection to the esx server directly without vc, to feature license tab, I selected evaluation mode is ok. but I can't added these in vc. Why?
can someone help out me.
Thank you very much.
hihiy
I don't think you can, you need to turn your TC to eval too, and before we do, your VC should not exceeded calclation eval of 60 days from the first day, it has been installed.
BTW, since you have valid VC 2.5 license, and is not the Foundation of VC, why don't you showing your ESX with eval license server to license? Add then the two ESX to your existing VC?
vcbMC - 1.0.6 Beta
Lite vcbMC - 1.0.7
-
Why I get that there are not enough licenses installed to perform the operation?
I have three servers that I fight with the chance to talk to an hp 1510i, but it's a different test. I have rebuilt the three servers 2 and now when I try to add them to the virtual Center 2.5.0 I get "There not enough licenses installed to perform the operation." These machines were on Virtual Centre before I rebuilt the. I don't understand why licensing is not be happy. Can someone give me advice on how to fix?
Let me know if you need more information.
Thank you
Ken
Your image shows 0 licenses for virtual center agent, that's why you can't add. Check your hosts and see which servers are using what licenses. A reboot must have cleared out the number of licenses, which must have caused the hosts re - synchronize the license info, which they periodically anyway. This may take some time, depending on your host is on the refresh interval. Make sure you do not have more than 6 ESX host, because that's what you are licensed. If this is not correct, check your license file is not the correct information. You can always go online to the portal of licenses and generate a new.
-KjB
-
This error message has begun to appear today after the migration of a virtual machine and try to restart. I have all the appropriate licenses. I even restarted the server vCenter and still nothing. Where should I start?
Same place: Configuration-> licensed features - > license-> Edit Source and that it points to the license server or host license file
-
ESX 3.5.0 317866 there are not enough licenses to perform the operation
Hello!
We have not changed anything in our virtual environment for 2 months. And now when I tried to turn on a virtual machine, I got the error
"There are not enough licenses to perform the operation.
As I understand it, there was a bug in some versions that should be fixed now.
Under the configuration of hosts and licensee I have ESX Server edition as unlicensed.
Then I click on edit and choose ESX Server Standard and click OK.
But the ESX Server edition remains as unlicensed.
In the VMware license server tools, everything seems fine. (As far as I see)
Below, you have the status of License Manager
Retrieves all the steps in this article and everything seems to be in order
Ko. VMware.com/kb/7114568
It simply doesn't get it.
Rasmus
--------
Status
--------
Status of flexible licensing on Thursday, February 24, 2011 16:11[Detection processes lmgrd...]
The license server status: 27000@vc
File (s) on vc of license: license VMware C:\Program Server\Licenses\converter.lic:C:\Program license Server\Licenses\esx1_xx_xx.lic:C:\Program license Server\Licenses\esx2_xx_xx.lic:C:\Program license Server\Licenses\vc_xx_xx.lic:C:\Program license Server\Licenses\vmware.lic VMware VMware VMware VMware:VC: license server UP (MASTER) v10.8
Demon provider (on vc) status:
VMWARELM: UP v10.8
Info according to its use:Users of P2V_ENTERPRISE: (Uncounted, node Lock)
Users of PROD_ESX_FULL: (Total of 4 licences; Total of 0 licenses in use)
Users of ESX_FULL_BACKUP: (Total of 4 licences; Total of 0 licenses in use)
Users of VC_ESXHOST: (Total of 4 licences; In total, 4 licenses in use)
V2005.05 "VC_ESXHOST", the name of the seller: VMWARELM
floating licenseVc vc (v2005.05) (vc/27000 801) SYSTEM, start game 2/24 14:57, 2 licenses
Vc vc (v2005.05) (vc/27000 102) SYSTEM, start game 2/24 14:57, 2 licensesUsers of VC_VMOTION: (Total of 4 licences; In total, 4 licenses in use)
V2005.05 "VC_VMOTION", the name of the seller: VMWARELM
floating licenseVc vc (v2005.05) (vc/27000 901) SYSTEM, start game 2/24 14:57, 2 licenses
Vc vc (v2005.05) (vc/27000 702) SYSTEM, start game 2/24 14:57, 2 licensesUsers of VC_DAS: (Total of 4 licences; In total, 4 licenses in use)
V2005.05 "VC_DAS", the name of the seller: VMWARELM
floating licenseVc vc (v2005.05) (vc/27000 302) SYSTEM, start game 2/24 14:57, 2 licenses
Vc vc (v2005.05) (vc/27000 202) SYSTEM, start game 2/24 14:57, 2 licensesUsers of VC_DRS: (Total of 4 licences; In total, 4 licenses in use)
V2005.05 "VC_DRS", the name of the seller: VMWARELM
floating licenseVc vc (v2005.05) (vc/27000 402) SYSTEM, start game 2/24 14:57, 2 licenses
Vc vc (v2005.05) (vc/27000 502) SYSTEM, start game 2/24 14:57, 2 licensesUsers of PROD_VC: (Total of 1 permit; In total, 1 license in use)
V2005.05 "PROD_VC", the name of the seller: VMWARELM
floating licenseVc vc (v2005.05) (vc/27000 602) SYSTEM, start game 2/24 14:57
Users of _PING_SERVER_: (Total of 1 permit; Total of 0 licenses in use)
You probably already checked this, but make sure that where it shows the license server in the CR, it says "not found". If so, modify, change anything, OK. And he can then reconnect. This happens a lot in one of our branches in bad bandwidth.
-
I installed a CD for an expansion set. But when I try to play, I get a message that says "game cannot be started because there is not enough disk space to run memory or hard drive." What should I do?
Thanks Lilbra5
Hello
try to do a right click on it and run as administrator
-
I install Windows 7 Ultimate update on Vista Ultimate. Compatibility check says I can go for it.
I have 348 GB of free space and 2.4 GB of Ram. I run Disk Cleanup and is are free programs on hard drive. When I run the installer, it gives me this message
There is not enough free space to store the temporary files of Windows installation.
I'd appreciate any help to overcome this problem.
Tried the fix you suggested. He changed nothing
You may be able to mark the partition on which is installed the operating system as being active.
- Open Control Panel by clicking the Start button, and then click Control Panel.
- Click system and Maintenance.
- Click on Administrative Tools.
- Double-click computer management. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
- In the navigation pane, click the disks as storage management.
- Select the volume that contains the existing installation of Windows Vista. In general, it is the C drive.
- Right-click on the volume and select Mark Partition as Active.
- Click Yes to confirm the action.
Could also contribute to:
If you have several hard drives remove all except the one that you install Windows 7, and then replace it after Windows 7 is installed.
Disable startup programs:
(A) click Start, type MSCONFIG in the search box and press ENTER.
OK the authorization of user account control and password if necessary
If you are using XP: click Start, run, and type: MSCONFIG and click OK.
(B) on the general tab, click Selective startup.
(C) just below the selective startup, clear the checkbox "Load Startup items".
(D) click the Services tab, check "Hide all Microsoft Services", and then click Disable all.
(E) click OK, and then restart the computer.
(F) try the upgrade again.(NOTE: If the upgrade fails and you continue to use your rear security software, then also go back into MSCONFIG and under the general Tower XP/Vista tab, click "Normal startup", and then click OK to exit.)
Also:
You need more than half of your drive is empty instead upgrade. If your reader is 1.0 TB (1, 000 GB), you need 500 GB + to be free.
If you cannot free enough space, you need to move data to external storage.
Free space - increase the hard disk space
The following procedure cleans the files associated with your user account. You can also use Disk Cleanup to clean all the files on your computer.
1. click the button start, in the search box, type disk cleanup, then click Disk Cleanup.
2. in the drives list, click the drive you want to clean, and then click OK.
3. on the Disk Cleanup tab, select the types of files to delete.
Note: To delete all Points except the most recent system restore - click on "Clean up System Files" and you will get another tab called more than Options. Now click More Options, and then click 'Clean up' under ' System Restore and shadow copies "and then confirm the deletion.
4. click OK at the bottom of the window cleaning disc and in the message that appears, click on delete files.Reduce the amount of space allocated to system restore.
1. start--> panel--> system and safety--> system
2. then click on the "System Protection" link located at the top left.
3. in "System Properties" window, click on the "System Protection" tab
4 locate the 'Settings of Protection' box and select / click on the drive letter (usually c :))
5. now, click the "Configure" button to change the settings to restore "disk space".
6. move the cursor to reduce the amount of space system Protection can use (min. 2 GB).
7. click "Apply" and then the "OK" button after setting the disk space.Questions about installing Windows 7?
FAQ - Frequently Asked Questions from Installation Windows 7 & responses -
Hard drive receiving "there is not enough space available to complete this operation" in Windows 7
Hello, I have install windows 7 upgrade from windows xp. My total hard drive is 500GB.but after installing windows 7, it shows 150 GB of disk space is not allocated. I tried disc managemaent IE right click on "Unallocated disk 150 GB" then volume.then simple new format then on next-next and then finish... and it displays error "there is not enough space available to complete this operation".n haa, I did a system restore in windows xp. Since the pc went slowly & with money problems... But it does not work.
Therefore, I installed windows 7 holding the pc faster. I think the restoration of the system to occupy this disk 150 GB space.so is show unallocated.
Please, be sure to this my problem. Tell me how to keep back my total 500 GB... Give me an appropriate solution. I will thanxful to you.
Kind regards
Pranjal
* original title - 150 GB hard drive is unallocated.showing "there not enough space available to complete this operation" _ *.
Hi pranjal1,
Please see article with other useful information:
http://Windows.Microsoft.com/en-us/Windows7/ways-to-improve-your-computers-performance
I hope this helps!
Debra
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think -
Administrator gets an access denied, not enough user priivileges to run the utility in elevated mode. No high privilege invites provided. Command is CONVERT F:/FS: NTFS.
F: is a USB drive of 250 GB FAT32 mounted port.
What is the solution for this issue.
OS Vista Home Premium SP 1.
See if the methods above will help you.
See you soon.
Mick Murphy - Microsoft partner
-
can someone help me?
I can't open the main folders such as documents, etc. I can't open the control panel. Repeated me error Explorer.exe there is not enough memory to run this program. Quit one or more programs and try again. Then, the audio has an x mark, that even with the internet icon has an x mark but I can use the browsers and the internet.when I click on brand x audio it is said that the audio service is not running, I think it happened after that I editing the permissions on the registry key for visual basic 2010. anyone from microsoft, please help.The same thing happened to me, and finally I found the solution, you're right, it's a registry Permission problem, what I tried and did not help:
-Mod safe - the same error
-Antivirus Live CD (Nothing found)
-Restore a backup of the registry - not worked
-Even worse, it is impossible to install softwareAnd here is the solution:
1. start a command as administrator prompt
2 copy and paste Foollowing code and press entersecedit/configure /cfg %windir%\inf\defltbase.inf/db defltbase.sdb / verbose
3. reboot your system
For more information, please visit my Blog (it's not in English)
-
There is not enough disk space to create the shadow copy of volume of storage location 0 x 80780119
Original title: create system image error - not enough disk space?
I am trying to create a system image on my external hard drive reformatted with over 400 GB of free space. I get the following error message: «is not enough disk space to create the shadow copy of volume of the vault...» 0 x 80780119"backup should take up to 82 GB of disk space. I have more then enough available space. External hard disk is formatted NTFS. My internal hard drive has more than 150 GB free. 64-bit Windows 8
Any suggestions?
Hi Mohammad,.
I thought that's kind of a joke to check the drive on my brand new Microsoft Surface, but I figured it's worth a try. It worked! You are a genius, thanks man.
-
If I move quickly I get a bookmark highlighted. The bookmarks will be displayed without disappear, but if I touch the mouse on the laptop disappears from the list of bookmarks.
Thank you. RonHave you tried Mode safe?
Hello
Try disabling graphics hardware acceleration. As this feature has been added to Firefox, it has gradually improved, but there are still some problems.
You will need to restart Firefox before this takes effect so save any work first (e.g. you compose mail, documents online that you are editing, etc.).
Then perform the following steps:
- Click the menu button
then select the Options under Windows or Preferences on Mac or Linux.
- Select the Advanced Panel, then on the general tab.
- Uncheck the use hardware acceleration when available.
- Restart Firefox and see if the problems persist.
This solve your problems? Please report to us!
If the problem is resolved, you should check the updates for your graphics driver by following the steps in these articles in the knowledge base:
Thank you.
Start your computer in safe mode with network. Then launch Firefox.
Try the sites secure web. Is always the problem? - Click the menu button
-
I use Windows 7 Pro. My target drive is drive ext WD 2 TB MY PASSPORT and my source drive is an internal 1 TB WD drive, I also tried to make a copy of the image using a 3 TB external drive Seagate Replica. Two targets readers have had a least 1.5 TB of free space. The source drive has 720 GB of free space. My computer has 16 GB of memory. In addition, while I am now using Windows backup and restore I tried also to use the Seagate Software. I was able to make a copy of clone of my partition to the C drive on a 1 TB Passport drive
[Moved frm comments]
Hi Steve,.
You get an error code?
This error comes usually when the system reserved 100 MB hidden partition created by Windows 7 does not have enough space to store a cliché. Please check the free space on this volume. Follow the following steps:
I suggest you perform the steps mentioned in this similar discussion.
Not enough space on the backup discs to use VSS.
Hope this information helps. Response with status so that we can help you.
-
We receive many messages "there are not enough connections in the SQL connection pool.
We get about 50 or more of these messages when running large consolidations in the consolidation system messages. We know not all the problems, but all 50 posts or more are less than one second of each other in the messages of consolidation. Our links are set at 40.
Should raise us this sum and if so, how do we determine how high solve this. This is a SQL 2008R2 database.
I can't find anything on this.
You need to increase the pool of connections for HFM in the hyperion configuration tool... By default, it is set to 40 by application. You can experiment with optimal values, but should help to 80-120. Go to config tool on the HFM node, select Configure the connection to the base. Click Advanced. You will find how to adjust the pool.
HFM still works perfectly with low, but since he has exhausted the pool, increasing will help.
Nick
Maybe you are looking for
-
TIME MACHINHE BACKUP REMAINS IN PREPARATION MODE
TIME MACHINE REMAINS IN PREPARATION
-
Bad VI: More specific error?
Is it possible to see why, when I mass compile a few screws, I get "bad vi? It seems that the error message could be more useful and tell why it is bad...
-
completely remove the OLD version of QUICKTIME on my computer
How can I remove the OLD Version of Quicktime? Even if he tells me its no LONGER there.
-
Support for multiple Active Directory ACS 5.2
Hello I couldn't find a way to add multiple domain controllers to Cisco ACS 5.2, all that he requires in the GUI of the ACS entered the domain name? We are limited to add the root DC /forest? I'm not a Microsoft Expert... I could not understand how A
-
A few weeks, my computer started buzzing and then stop. Later, I started again in safe mode. I started again with safe mode several times. Now I start it in normal mode, but it still turns off after a while, even if it sounds no more. What could be w