There is a hrmful software detceteced is antivirus | is the virus win/sality.am

I can't get this alert from firewall antivirus Center is carring a bud on my computer, I don't want to buy all the things now, I can't use my computer rogue: win32 defmid put a virus in my computer.

Hello

Antivirus Center is a fake anti-spyware from the same family as the Internet Protection. This malware is installed on your computer through the use of Trojans and fake scanner pages that pretend to be updates for Adobe Flash. When the center of the Antivirus is installed on a computer it will be configured to start automatically when Windows starts. Once started, it will run a fake scan of your computer and can say that there are many present infections. If you try to delete one of these infections tell with the program it will state that it is unable to do until you buy it. As none of the infection files actually exist on your computer, please disregard these analytical results and do not buy the program.

Follow the instructions in removing EXACT on the link below to remove it

what you see is penultimate graph it uses

http://www.bleepingcomputer.com/virus-removal/remove-antivirus-Center

Download update and scan with the free version of malwarebytes anti-malware

http://www.Malwarebytes.org/MBAM.php

You should also download and run rkill to stop the process of problem before you download and scan with malwarebytes

http://www.bleepingcomputer.com/download/anti-virus/rkill

make it work above in safe mode with networking

Windows Vista

Using the F8 method:

  1. Restart your computer.
  2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
  3. Select the Safe Mode with networking with the arrow keys.
  4. Then press enter on your keyboard to start mode without failure of Vista.
  5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
  6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

Tags: Windows

Similar Questions

  • Problems of software download Norton antivirus after the recovery of the product

    Recently, I used the product recovery disc to restore my computer to its original state. I then logged on Norton to reinstall my anti-virus but I get the following message:

    A PROBLEM OCCURRED WHICH NEEDS YOUR ATTENTION

    This product is not compatible with the operating system of computers you. You must have one of the following systems.

    Microsoft Windows Vista (32 bit & 64 bit) don't pack 1 or later starter/Home Basic/Home premium/professional/ultimate

    I got this version of Norton running before you run the product recovery.
    Any help on this would be highly appreciated.

    Owen.

    Hello Owen

    As far as I know Toshiba use trial versions that you can use for three months. After this time, you must purchase a license or remove the preinstalled version of the system.

    If your decision is to use Norton, I think that all questions related to Norton must be clarified with their support.
    Have you already contacted support Norton?

  • Error 0 x 80000003 - software does not work on the machine Win 7

    I'm running a fully corrected and updated installation of Windows 7 Ultimate with Office 2010, Adobe Acrobat XI and various other software up-to-date.  My machine has downloaded Windows 10 but I have not yet installed.

    Everything was working fine last night BUT this morning:

    -Outlook 2010, Word 2010 and Powerpoint 2010 will not start. IE 11 starts and then immediately fails.

    -Adobe Acrobat Pro XI does not start

    -Adobe Reader XI does not start

    In each case, I get the message: "the application could not start properly (0 x 80000003). Click OK to close the application. »

    However, the following programs open and run:

    -Excel 2010, OneNote 2013, OneNote 2010 - if SOME Microsoft works software

    -Chrome, 2013 Quicken, Quickbooks, Dragon Naturally Speaking-all of this work.

    * - I was able to make a PDF using Adobe Acrobat Distiller, but then, I was unable to view the PDF file, because the appearance of the Adobe viewer is broken.

    What do you think the problem is, and how can I fix this please?  This problem affects more than one type of software so it seems to be a Windows problem, is not a problem of Office 2010.

    Thank you for your attention!

    I had the same problem... word, outlook, adobe, PowerPoint opens... just got the error 0 x 80000003...  I uninstalled emet and boom... everything opens... now I need to know if I need to install a newer emet...

  • antivirus detects a virus but cannot remove it.

    Original title: my antivirus detects the virus, then I try to run the program to delete but it won't let me?

    I was struck by the virus, ive tried several different programs, which find them all, but when I try to remove them, he said cannot run the program.

    Hello

    Download update and scan with the free version of malwarebytes anti-malware

    http://www.Malwarebytes.org/MBAM.php

    You should also download and run rkill to stop the process of problem before you download and scan with malwarebytes

    http://www.bleepingcomputer.com/download/anti-virus/rkill

    make it work above in safe mode with networking

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode with networking with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.
  • where is Canon G2000? is there a Canon G2000 software for mac?

    where is Canon G2000? is there a Canon G2000 software for mac?

    Contact Canon,

    If the drivers are located on this site which is on 'someone' with email canon.com

    http://support-th.Canon-Asia.com/contents/th/en/0100698602.html

    https://whois.ICANN.org/en/lookup?name=Canon-Asia.com

  • Win 7: is there any good free software for the calibration of the screen?

    Hello

    I have Win 7, under control panel > light > Calibare color the user cannot see the effect of the Nigerian calibrtion he put an end to all the steps.

    Can I find out if there are any good freware to allow the user to see how a screen (web page or a text with opicture) alter as he change, Gamma, red, blue green, brightness, contrast, clear type of police etc.) ?

    This is very useful for fast and accurate calibration according to the needs of the user.

    Thank you

    Low

    Hello

    Microsoft don't recommend any third-party software.  I suggest using your favorite search engine and look for the calibration software.

    Note: With the help of third-party software or a link, including hardware drivers can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the use of third party software or link can be resolved. Using third-party software or a link is at your own risk.

  • Is there a cleaning utility to remove detrius after uninstaling the HP C6380 software please?

    As I was unable to get my family of 3-XP-PC, connected to my home network shared printer HP C6380, I uninstalled the HP software via Control Panel. Then when I tried to do a clean install the HP software wouldn't let me do, and all sorts of bits HP remained in my system as a Kling-on of Star Trek.

    So I deleted the C:/program files/HP and c:/program files/Hewlett Packard directories, I cleaned using CC cleaner, arrested HP startup using MSCONFIG and ABUSE files. MSC and finally I removed all that I could find to HP in my registry.

    Even after all this, the last driver HP software does not give me the option to install the main software, but does not give me the option to add additional software, for example option applications I've ever wanted as HP inks.

    So I need a utility HP cleaning.  I see old references on the internet at such a utility in 2005-2008, but these links of HP are now dead or blind.

    Can HP or anyone recommend a cleanup utility appropriate please - so I can use it - so I can do a clean install?

    Put the installation CD into your computer and access the UTIL/CCC directory.  In this directory are files uninstall_L1.bat through uninstall_L4.bat.  Run the first three of them, uninstall_L1.bat, uninstall_L2.bat and uninstall_L3.bat.  It may be necessary to restart after some of them run.

  • My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

    My Apple Macbook late 2009 has been upgraded to 4 GB and Mountain Lion but runs very slowly. When I check the memory system activity monitor, I see that there are 1.6 GB inactive. Is this the cause of the slowness and what I can do?

    Reinstall OS X from scratch and add more RAM.

    Ways to help make a slow Mac faster

    17 reasons why your Mac runs slower than expected

    Slow performance of Mac? This Article addresses!

    Difficulty of slow start in OS X | MacFixIt - CNET Reviews

    6 easy tips to speed up OS X Yosemite on your Mac.

    Avoid using third-party software that claims to clean your computer. This software does more harm than good. In addition, you don't need it. Note that all computers become slower over time even in the normal conditions of use. Generally, the experienced users erasing the hard drive and do a clean install from scratch at least once a year or every time that the installation of a major upgrade of the OS. Well sure doing so also means that you need to maintain regular and several backups.

    Add more RAM or reduce the number of simultaneously executed from applications and utilities. Remove unnecessary software such as anti-malware and that promises to clean your Mac. Look for the runaway process: Runaway applications can shorten the battery life, affect performance and increase the heat and fan acti... See also:

    Before Mavericks

    Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

    Mavericks and later versions

    Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If you find a process that uses a large amount of CPU %, then select the process, then click on the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

    Things you can do to solve the slow Downs

    If your computer seems to run slower, here are some things you can do:

    Start with tours: OS X maintenance - MacAttorney;

    The X Lab: the X-frequently asked questions.

    " Safe mac" Mac Performance Guide;

    " Safe mac" the myth of the dirty Mac;

    Maintenance fast Mac Help.

    Start in Safe Mode , and then repair your hard disk and permissions:

    Fix the hard disk and permissions before Lion

    Boot from your OS X install disk. After the installer loads, choose your language and click on the button continue. When the menu bar appears select utility drive in the Utilities menu. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no errors are reported, click repair permissions. Wait until the operation is complete, then exit FROM and return to the installer.

    Repair the hard drive - Lion-Lion/mountain/Mavericks

    HD recovery start:

    Restart the computer and after the buzzer, press on and hold down the COMMAND and R until it appears the screen of Menu utilities. Otherwise, restart the computer and after the buzzer, press on and hold down the OPTION key until the Boot Manager screen. Select recovery HD disk icon and click on the button below.

    When the recovery menu appears, select disk utility. After that the charges of THE select your entry from hard drive (mfgr. ID and car size) in the list on the left.  In the status area, you will see an entry for the S.M.A.R.T. status of the hard drive.  If it does not say "Verified" then the hard drive is faulty or has failed. (State SMART is not reported on external drives Firewire or USB). If the drive is "verified", then select your OS X volume in the list on the left (subentries under the entry for the road), click the first aid tab, then click the repair disk button. If THE reports any errors that have been corrected, and then run repair disk again until no errors are reported. If no error is not reported, then click repair permissions. Wait until the operation is complete, then exit FROM and return to the main menu. Select restart from the Apple menu.

    Restart your computer normally and see if it helped at all. Then do little maintenance:

    For disk utility can't handle situations, the best third party is Disk Warriorutility;  Fixed DW only for problems with the disk directory, but most disk problems are caused by the corruption of directory; Warrior drive 4.x is now compatible with Intel Mac.

    Note: Alsoft ships DW on a bootable DVD that will boot Mac running Snow Leopard or earlier. He cannot start Mac that came with Lion or later preinstalled, however, DW will work on these models.

    Suggestions for OS X maintenance

    OS X performs certain maintenance functions that are supposed to take place on a daily, weekly, or monthly period. Maintenance scripts that are run at the beginning AM only if the computer is turned on 24/7 (no sleep). If this isn't the case, then a great solution is to download and install a shareware like Macaroni, JAW PseudoAnacronor Anacron utility that will automate the maintenance regardless of whether activity if the computer is off or asleep.  Dependence on third-party utilities to run periodic maintenance scripts has been significantly reduced since Tiger.  These utilities have little or no functionality with Snow Leopard or later version, and must not be installed.

    OS X automatically defrags files smaller than 20 MB in size, so unless you have a disk full of very large files it little need to defragment the hard drive.

    Under no circumstances should you install operating MacPaw or ZeoBit software (CleanMyMac/CleanMyDrive or Mac Keeper, respectively.) You don't need special software to keep your computer.

    Useful links about malware Protection

    "If you have an immediate problem with ads popping up see the Mac without danger" Adware removal Guide and AdwareMedic.

    Open Safari, select Preferences from the Safari menu. Click the Extensions icon in the toolbar. Disable all Extensions. If it stops your problem, then re-enable one by one until the problem returns. Now remove this extension as it is the origin of the problem.

    The following comes from user stevejobsfan0123. I made minor changes to adapt to this presentation.

    Difficulty a few pop ups browser that supported Safari

    Common pop - ups include a message saying that the Government has taken over your computer and you pay release (often called "Moneypak"), or a false message saying that your computer has been infected and you need to call a number of tech support (sometimes claiming to be Apple) to get it to be resolved. First of all, understand that these pop-ups are not caused by a virus and that your computer has not been assigned. This "hack" is limited to your web browser. Also understand that these messages are scams, so don't pay not money, call number, or provide personal information. This article will give an overview of the solution to remove the pop-up window.

    Quit Safari

    Usually, these pop-ups will not go by clicking 'OK' or 'Cancel '. In addition, several menus in the menu bar may become disabled and show in grey, including the option to leave Safari. You'll probably force quit Safari. To do this, press command + option + ESC, select Safari, press on force quit.

    Relaunch Safari

    If you restart Safari, the page will reopen. To avoid this, hold the "Shift" key when opening Safari. This will prevent windows since the last time that Safari was running since the reopening.

    It will not work in all cases. The SHIFT key must be maintained at the right time, and in some cases, even if done correctly, the window is displayed again. In these circumstances, after force quit Safari, turn off Wi - Fi or disconnect Ethernet, depending on how you connect to the Internet. Then restart Safari normally. He'll try to reload the malicious Web page, but without a connection, it will not be able to. Leave this page by entering a different URL, i.e. www.apple.com and try to load it. Now you can reconnect to the Internet and the page that you entered is displayed rather than the malicious.

    An excellent link to read is Tom Reed Mac Guide of malicious programs.

    Also, visit the FAQ XLab and read of detection and avoid malicious software and spyware.

    Check out these articles from Apple:

    Mac OS X Snow Leopard and malware detection

    OS X Lion-Protect your Mac against malicious software

    OS X Lion mountain - protect your Mac against malicious software

    OS X Mavericks-Protect your Mac against malicious software

    On the quarantine of file under OS X

    If you need antivirus protection Thomas Reed recommends to use ClamXAV. (Thanks to Thomas Reed to this recommendation.)

    The user Joe Bailey comes this equally useful advice:

    The facts are:

    1. There is no anti-malware software can detect 100% of malware out there.

    2. There is no anti-malware that can detect all targeting the Mac.

    3. the best way to prevent breaches the most is for you as the user is aware that

    the most successful malware attacks rely on sophisticated social engineering

    techniques preying on human greed, * and fear.

    4 Internet pop-up windows telling the FBI, NSA, Microsoft, your ISP has detected malware on

    your computer is designed to trick you into installing their malware thinking it's a

    protection against malware.

    5. some of the anti-malware market products are worse than malware

    go where they are supposed to protect you.

    6. be careful where you go on the internet.

    7. don't download anything from sites, you know are safe.

    8 avoid links that you receive in email, always be wary, even if you get something

    you think a friend is, but that you did not expect.

    9. If there is any question in your mind, then assume that it is malware.

    Troubleshooting Applications

    I recommend that you download a utility such as TinkerTool System, OnyX, Mavericks Cache Cleaneror hiding a Cocktail that you can use to delete the former newspapers and archives, cleaning, etc. Corrupted cache, logs or temporary files can slow down the application or OS X crashes and panics of the kernel.

    If you have leopard snow or leopard, then for similar repairs install Applejackfreeware utility.  If you do not start in OS X, you can boot into single-user mode , where you can run Applejack to make a set of routines for repair and maintenance of the command line.  Note that it takes 1.5 AppleJack for Leopard. AppleJack 1.6 is compatible with Snow Leopard. Applejack does not work with Lion and later versions.

    Basic backup

    For some people, Time Machine will be more than enough. Time Machine is part of Mac OS X. There are two components:

    1. a panel of Time Machine preferences as part of the system of preferences;

    2. a request for Time Machine, located in the Applications folder. It's

    used to manage backups and restore backups. Time Machine

    requires a backup drive that is at least twice the capacity of the

    drive being backed up.

    You can also get an external drive at least equal to the size hard disk internal and make (and maintain) a bootable clone/backup. You can make a bootable clone using the disk utility's restore option. You can also create and maintain clones with good backup software. My personal recommendations are (the order is not significant):

    1 Carbon Copy clone

    2. get backup

    3 already seen

    4 superDuper!

    5. Synk Pro

    6. Tri-Backup

    Visit The FAQ XLab and read the FAQ on the backup and restore.  Also read How to back up and restore your files. For using Time Machine, visit FAQ Time Machine of Pondini for help with all this time Machine.

    Referenced software can be found at MacUpdate .

    Additional tips

    Make sure you have a sufficient amount of RAM installed for the number of applications you run simultaneously. Make sure to leave a minimum of 10% of the capacity of the hard disk as free space.

    Add more RAM. If your computer less than 2 GB of RAM and you use OS X Leopard or later, then you can do it with more RAM. Snow Leopard and Lion works much better with 4 GB of RAM that is their system. Most concurrent applications, that you tend to use the more RAM you should have.

    Always have at least 15 GB, or 10% of the capacity of your hard disk as free space, the largest. OS X frequently accesses your hard disk, so offering enough free space will keep things slow down.

    Check for applications that may be hogging the CPU:

    Before Mavericks

    Open the activity monitor in the Utilities folder.  Select all processes in the drop process .  Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

    Mavericks and later versions

    Open the activity monitor in the Utilities folder.  Select all processes in the menu display .  Click the CPU tab in the toolbar. Click the % CPU column heading twice to display in descending order.  If find you a process that uses a large amount of time processor (> = 70,) then select the process, and then click the quit icon in the toolbar.  Click the force quit button to kill the process.  See if that helps.  Don't forget to mention the name of the runaway process, so you can find the cause of the problem.

    This problem occurs often because of a corrupted cache or the preferences file or an attempt to write in a corrupted log file.

  • Whenever I turn on my computer I get a box that pops up and say "Update: there is an error during installation." Please reinstall the application.

    Whenever I turn on my computer I get a box that pops up and say "Update: there is an error during installation." Please reinstall the application"How can I do this?

    Original title: when I turn on my computer

    You should consider carefully as pop - up and determine what application has a problem.

    If he has no idea anywhere in the pop - up, first physically disconnect your computer from the Internet (because in the following steps, you will temporarily disable your antivirus software).

    • Click Start and type "msconfig.exe" (without the quotes) in the search box and press ENTER.
    • When the "System Configuration" window opens, select the tab "start".
    • Uncheck the half of the listed items (for your convenience, click on "Startup Item" in the column header to sort the items alphabetically)
    • Click OK and restart (click here to avoid the warning that you are in a diagnostic mode)

      If the pop-up warning does NOT appear, the problem application has been one of the items you unchecked.  If this is the case, reopen the System Configuration and check again half of the elements that had checked you.

      Similarly, if the pop-up warning appears, then the application problem is that remained turned on. In this case, open the Configuration of the system, again check the items that you had disabled, then uncheck half of the remaining items.

    • Restart and continue the process until you have identified the problem application.
    • Once you have identified the problem application, open System Configuration once more, select "Normal startup" on the "Général" tab and restart.
    • Do not forget to reconnect your computer to the Internet
    • Uninstall or reinstall the application issue.
  • There is still a huge problem of compaction of the mailboxes

    Once more I heard a person in great distress because Thunderbird removed some critical mail messages. In this case they went to get the mail and gave him a TB ALERT, and told him he had no place in her dressing room IN (there was a huge 20 messages). Thinking that the file was too big (which is a logical deduction of a message "no more room") it compacted his IN box and then there were 4 messages. Other messages have disappeared.

    And worse, all the information on the forums are explanations and the defence of TB - as if it was his fault to be compacted, not backup or (my favorite) - an article that says TB is just do what it says to do.

    When we combine this with all the traffic of other message here and on other sites about the loss of emails the only thing that is clear is that the modules dealing with indexing and compacting of the mailboxes are tragically flawed. Unfortunately and that's the problem with free software #1 - product builders are doing it for ego, no money, so once they decided that their program is fair and users are mistaken - there it sits, cast in concrete.

    Thunderbird has been and is still a leader in form and features but lose data user - for ANY reason-EVER - is and will always be the fault of the developer and no - EVER - users shouldn't have to change its behavior in order to avoid a problem that the developer does not know how to fix.

    Of course, there are a solutions - each a work-around to avoid a bug.

    As an explantion, I can offer this info.
    Emails are not stored in individual files.
    They are stored in files mbox, an e-mail listed after another in the order they have been downloaded. If all emails in an Inbox folder, as shown in the folders pane are all in one Inbox file.
    When you choose to delete a message, this message is "marked as deleted" and your Visual point of view, it is removed from the Inbox folder in the folders pane and reappears in the folder "Deleted".
    In reality, it is always in the Inbox just "marked as deleted.
    When you compact the file, these emails "marked as deleted" are deleted, thus creating more space and store the file.
    If you do not compact the folder on a frequent basis, the file gets more and wider and at some point may be damaged due to lack of maintenance. Then Thunderbird is perhaps not in a position to say where there is a clear end of the deleted section, therefore resulting in losing a good email.

    So, as all documents etc. on your computer, you must do a few basic things to reduce the risk of data loss.

    Use the information you learned in the link "keep it works."
    Use the Inbox folder as a folder, Inbox, and not as a general storage.
    Compact records on a regular basis.
    Create backups on a regular basis.
    "Options of the Archive"allows to reduce the size of the files, including the "Sent" folder.
    https://support.Mozilla.org/en-us/KB/archived-messages?ESAB=a & s = Archive + options & r = 0 & s = ACE
    Archived files are always in the profile Thunderbird and always as accessible and also require backup.

    Losing emails is a pain and can be troublesome say the least.
    But if you follow the guidelines, then, you reduce the risk of experiencing a problem.
    I've manually compress my inbox every day that I will probably have a dozen deleted messages.
    I save every month and leave emails on the server for a month, then only between the two, anyway to lose, I can probably recover most if not all emails.

    If all goes well, this explains what has likely occurred and how to manage things so that in the future, you are less likely to suffer from corrupt files and more likely that you have a loss, there is a backup plan that you can use.

  • We need to get the new software we ix2-200 NAS new computers-Win 7 64 bit, old XP32 bit

    Hi everyone;

    Our company's new computers and they will be Windows 7 64 bit. We currently use XP with 32 bits. Do we need new software to connect to ix2 - 200 or the software that accompanies if will be good. Thanks for you help and have a great weekend.

    Hello Raym0nd69,

    There isn't any software owner to access the ix2.

    They run out of network/Internet protocols.

    as long as you have the IP address you can access the user interface, and as long as you map the actions you should be able to access the data.

  • HP ENVY 15 t-j000 Quad Edition: 50 + HP driver/software downloads are absent from the CTO Quad HP ENVY 15 t-j000 Product Support page

    What happened to the HP Software and Driver Downloads for my HP ENVY 15 t-j000 Quad Edition CTO Notebook Model # C8P48AV built in July 2013? There were 58 results software and driver for Windows 8.1 64-bit last week when I printed the list last week. Today, I received the following message when I tried my laptop:

    We were able to find the drivers for your product. Pilots may be developing, so please, check back at a later date or visit the product home page.

    How the hell could all disappear? I hope it's temporary! Extremely disappointed with HP support.

    Thank you banhein! Support page for the software and drivers for my model is back! Happy, it was only a temporary problem.

    http://support.HP.com/us-en/drivers/selfservice/HP-envy-15-J000-Quad-Edition-Notebook-PC-series/5387620/model/5388029

  • Need software to transfer pictures to a PC Win 8.1 to intelligently

    Hi, I'm a newbie here and happy to have found the jury.

    I have several Canon digital cameras and have managed to get the images from the cameras for Windows XP and 7 PC systems via USB without problem. Transfer software would: 1) refers to the location of storage on the PC, 2) images to give a name, 3) remove the image from the camera when you are finished. Maybe there are other options available.

    Windows 8.1 is an integrated application named camera and Canon has a suite of programs in CameraWindowDC. Both give the same result when the camera is set on the PC. The PRO 8.1 Windows system recognizes the camera model and transferres images. There are no options for the destination folder, name, or delete offered. The images are stored by date group in system folder for images.

    Any suggestions on the localization of the previously managed software download? I am ignorant on this subject. Was it Microsoft or Canon. If Canon, it is perhaps on the disks that came with cameras. The name?

    Thanks in advance for any thoughts.

    Bill

    Hi Bill,

    You can set the destination folder when you connect your device to your computer.  When the CameraWindow opens, click on the gear icon on the top of the left side of the window.  On the next page, click on the 'Import' tab, then choose "Folder settings" select the destination folder.

    For more information about the location of the Canon software, please let us know what Canon camera you have.

  • Windows crashes software when it cannot verify the Publisher * found the problem

    * Found the problem, thank you anyway

    I use Windows XP and IE8, and I am trying to allow the installation of ActiveX controls.

    I get the following warning of safety and error: "Windows has blocked this software because it can't verify the Publisher.

    To protect your computer, Windows crashes software when it cannot verify the Publisher. »

    I have read a dozen forums and tried all the tips. I don't know what I'm doing wrong.

    I tried going into the tools of IE tab and changing the security options to "allow software to run or install even if the signature is not valid.

    I unchecked the boxes to "verify signatures.

    I passed the security settings and select: fast for "Unsigned download Active X controls" and: ask the user 'initialize and script ActiveX controls not marked as secure..'  and 'activate' to 'run ActiveX controls '.

    I even added the IP domain in my zone of confidence and lowered my security level to 'low '.

    I also remembered to close and restart IE.

    I always get the error message when you try to leave the site to install ActiveX. controls.  FYI the ActiveX is remote viewing of a security camera.

    If anyone has any other clues that could help me with this problem I would be very grateful.

    Fancy

    Thanks James, but I found the problem.  There was an extra box that I neglected to "verify" that allowed to install unsigned files.  I thought I had checked and unchecked everything related but I missed a.  Scary lengths windows go to protect me! :)

    Fancy

  • error message: scvhost.exe - Application error: the exception unknown software exception (0xc06d007e) occurred in the application at location 0x7c812afb.

    I closed my computer and he says there are a few updates that should be installed in front of him close. I let it run and my computer off. Now, when I turn it back on I get the following error message: scvhost.exe - Application error: the exception unknown software exception (0xc06d007e) occurred in the application at location 0x7c812afb. And now I can't get my computer to connect to a wired or wireless internet connection, and it seems to be running slow. Any ideas what it is or how to fix it?

    Also, I tried to restore my computer to a few days ago and running my software virus and nothing is changed.

    Hello

    Have updates you installed? You can check this in the history of the update?

    Step 1: To check the update history, follow these steps:

    1. Click Start, click all programs, and then click Windows Update or Microsoft Update.
    2. on the Windows Update Web site or the Microsoft Update Web site, click on view update history.

    Step 2: Refer the article that could help you solve this problem.

    You receive an error message after a Windows XP-based computer runs an automatic update, and you may be unable to run any programs after the closure of the "svchost.exe - Application error" error message dialog box
    http://support.Microsoft.com/kb/927385

Maybe you are looking for

  • ChangJie problem when using Smart Keyboard (iPad Pro)

    I'm on iPad Pro 9.7 "(iOS10) with Smart keyboard." I can't type Chinese when you use Changjie - QWERTY Smart keyboard. However, he is very good with the help of Changjie - Standard or type without Smart keyboard. I'm quite sure that this isn't a prob

  • Satellite L450D-failure of the creation of recovery disks

    I just bought the laptop above and tried to create discs of recovery twice.Both times, there is no on the first DVD with the following error message:Differences between the following filesD:\HDDRecovery\ODDFiles\sources\boot.wim source pathE:\sources

  • The highest element of several bays

    I have four tables 1 d (each approximately 80 long items) stored in locations slightly different in a cluster of 'Super' (the most relevant levels can be seen in the image below). I need to find the value of the highest element in these paintings. I

  • When should I and how can I reset my wireless network?

    If I have problems printing, why should I reset my network? Most of us are well aware of the miracles that can happen to a simple reboot when you encounter computer problems.  Often, the same is true of wireless networks.  Over time the connections c

  • Its a echo

    Sound problem Months ago I changed my sound on the computer so that it echoes. I hated since but every time I'm looking for where I did, I come up with nothing. I'm on XP Home Edition. Any ideas?