There is an error while debugging romoting

Similar Questions

• In e-mails AOL, verification of the individual messages in the results of regular system in this error message: there was an error while loading the message. Please try again later.

  In access to AOL e-mail via the full version, I can navigate my account (old messages, new messages, spam, etc.) very well, but when I try to open an individual email, I get this error message: "there was an error while loading the message. Please try again later. »

  This is identical to a problem someone else was described in another thread... Unfortunately, nothing suggested you him seemed to work. I have BEEN cheated at the opening of a file attached to an e-mail immediately before this started, so I think it's a virus or something. IN ANY CASE... I AM able to open the messages when I use the basic version of AOL. Initially, the problem seemed to be in Firefox, but I tried with Internet Explorer now also and it's the same thing, and the basic version is accessible while the full version is still blocked.

  On both browsers, after the error message, I can't even click on individual posts to TRY to open another, and there are a few not-very-right boxes and the x and the things that appear on the screen that do not belong.

  Please tell me that you can not do that, go away... I tried uninstalling and reinstalling... Firefox who did not. I also enjoy McAffee, and that has not changed anything.

  You can do a check of malware with several digitization programs of malicious software on the Windows computer.
  
  Please scan with all programs, because each program detects a different malicious program.
  
  All of these programs have free versions.

  Make sure that you update each program to get the latest version of their databases before scanning.

  • Malwarebytes' Anti-Malware:
    http://www.Malwarebytes.org/MBAM.php
  • AdwCleaner:
    http://www.bleepingcomputer.com/download/adwcleaner/
    http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml
  • SuperAntispyware:
    http://www.SUPERAntiSpyware.com/
  • Microsoft security scanner:
    http://www.Microsoft.com/security/scanner/en-us/default.aspx
  • Windows Defender:
    http://Windows.Microsoft.com/en-us/Windows/using-Defender
  • Spybot Search & Destroy:
    http://www.safer-networking.org/en/index.html
  • Kasperky free Security Scan:
    http://www.Kaspersky.com/security-scan

  Alternatively, you can write a check for an infection rootkit TDSSKiller.

  • Utility anti-rootkit TDSSKiller:
    http://support.Kaspersky.com/5350?El=88446

  See also:

  • "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked

• "There was an error while trying to delete the snapshot"

  I am running VMware Fusion on a 10.5.7 and when I try to delete the old clichés I get this error

  "There was an error while trying to delete the snapshot

  Impossible to clean deleted files:

  The specified virtual disk needs to be repaired.

  It's the performance of FreeBSD. The server has no harm actually run but gets big enough and I would like to clean it up a bit. Any suggestions?

  Thank you very much

  MacGruder says:

  I am running VMware Fusion on a 10.5.7 and when I try to delete the old clichés I get this error

  "There was an error while trying to delete the snapshot

  Impossible to clean deleted files:

  The specified virtual disk needs to be repaired.

  It's the performance of FreeBSD. The server has no harm actually run but gets big enough and I would like to clean it up a bit. Any suggestions?

  Firstly it goes without saying, but I'll say it anyway...  Always back up all of the Virtual Machine with the Virtual Machine within the OS, not suspended, and Fusion to stop closed before trying to make repairs on a virtual hard disk.

  This may not work if it's the basic disk that needs to be repaired and the Virtual Machine has snapshots, but I go through it.  You can try to use "/ Library/Application Support/VMware Fusion/vmware-vdiskmanager ' with the '-r' option.  Note: If the basic disk do not while snapshots are at stake, because it will cause more problems so my suggestion is first try to create a new basic without snapshots disk using the information below (see another option).

  Also one of the reasons to delete a snapshot may fail if there is no adequate free disk space for the operation ends so make sure you have a lot of free disk space.

  Another option would be to create a new basic disk, and then use dd by using an Image of CD/DVD/ISO Linux Live in the image of the old drive so written delta in snapshots to a new basic disk.

  I like to use the ISO Image of KNOPPIX_V5.1.1CD - 2007-01-04 - IN .iso to start the Virtual Machine and use dd to leave because it works well with VMware SCSI virtual hard disks.

  Also in Fusion 2.x, configuration the target Virtual Machine's .vmx file must be changed manually to have the present following parameters when using Knoppix.

  usb:0.deviceType = "mouse"
  usb:0.present = "FALSE"
  mouse.vusb.enable = "FALSE"
  

  Note: The first two parameters may already exist but if the other exists and is set to true, then set it to FALSE and the third are probably already so just add it.

• "CFADMIN", "there was an error while checking the token. The session has expired or UN-bel

  People - I am really stumped on this one and need help.  I train a new employee on our CF 9.0.2 EA environment and I wanted him to run some of our scheduled tasks.  I had to open a session in the production with the admin site and password (one-time password using only the id of cfadmin "generics") without incident.

  He sailed to the scheduled tasks without incident, clicked the button "Run the scheduled task" and upward jumped a message to open a session in Administrator CF.  Never, ever have I seen this happen before.  I checked, and no one else was recorded in the CF administrator at the time.

  The application log contained the following warning: "CFADMIN", "there was an error while checking the token. The session has expired or unauthenticated access is suspected. »

  I have google, Yahooed and anything else in the meantime and can only end of references to CF10 and single account sessions.  Yet once we checked it was the on using only the administrator see  (I know because I am just another one who knows the admin password).  We are all both in the same group of security for the server (Windows 2003 R2) administration have the same level of security to the database - read-only (MS SQL Server 2005), but none of this is important since we are through THE and by using the IUSER or IWAM permissions.  Doesn't seem to matter if the integrated Windows authentication check or not in IE options either.

  I tried to separate application ID and password security - but I got the same error message.

  All ideas are most appreciated.

  Libby

  Charlie - thank you very much for your help.  Although you have identified the real problem, unfortunately I have always a solution.  But I kept in the back of my mind...

  But just recently, I was hit with this same problem myself.  As a last resort, I clean my cookies and all my temporary Internet files.  For me, that did the trick.

  My store is running the most vanilla of CF9 environments possible, Web site instance unique, the only database MS SQL Server, IIS 7 on a Windows 2008 R2 server.  Absolutely not the bells and whistles.

  Again, thank you for taking the time to read my post and you offer thoughts and support.  Without the help of specialists like you - well - I don't know where I'd be.

• Event Viewer error "there was an error while trying to read the local hosts file." file "hosts" but good

  Hello

  In Event Viewer, I see a lot of mistakes like:

  Source: The customers DNS events

  There was an error trying to read the local hosts file.

  I read that threat indicating to rename the hosts for "hosts" file

  http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-networking/system-log-shows-repeating-error-code-3221225485/3700e855-ded4-4F12-960f-1577f6132c04

  HOWEVER, the name of the file in my computer appears as it should

  C:/Windows/System32/drivers/etc / "hosts".

  and the content of the file is as it is supposed to be according to: http://support.microsoft.com/kb/972034

  What should I do to fix this error?

  P.S. I suspect my computer is compromised. Last weekend, Security Essentials has reported a malicious file backdoor and it has been deleted, but I have a weird behavior of the computer

  Thank you

  Veronica

  Try to re-create the hosts file.

  Open Notepad as administrator (click right on the Notepad icon or shortcut and click Run as admin) and type the following information in it:

  127.0.0.1 localhost

  : 1 localhost

  The '1' in the '127.0.0.1' must be in the first column of the line and there must be at least one space between "127.0.0.1" and "localhost". In the second line, there must be at least one space between ": 1" and "localhost".

  Save the file with name "hosts" in the C:\windows\system32\drivers\etc folder.

  Source: http://www.sevenforums.com/system-security/130518-hosts-file-missing-should-i-worry.html

  You seem to have a hard drive problem. Please provide a copy of your system information file. Type the system information in the search box above the Start button and press the ENTER key (alternative is select Start, all programs, accessories, System Tools, system information). Select file, Export and give the file a name noting where it is located. Not to place the cursor in the body of the report before exporting the file. The system creates a new information file system each time system information is available. You must allow a minute or two before the file is completely filled before exporting a copy. Please download to your OneDrive (formerly Sky Drive), share with everyone and post a link here. Normal mode preferred report. Please say if the report was obtained in safe mode.

• Lightroom 5.7.1 does not open.  There is an error message that there is an error while reading from the cache of the preview.  How can I fix this error?

  Lightroom 5.7.1 does not open.  There is a message that there is an "error reading from the preview cache".  How can I fix this error?  I can not find the folder cache of Lightroom preview either in the "Programs folder or the programs (X 86) folder."

  Hi PMB.

  You must remove the preview for your Lightroom Catalog Cache.

  It is located in the same folder as the catalog in Lightroom. The name of the cache an extract ends with Previews.LRDATA and should be deleted. Not to be confused with *. LRCAT, which should not be deleted. Here is a picture of what it is named as default Lightroom5catalogPreviews.Lrdata.

  Location /Pictures/Lightroom on Mac and my Pictures\Lightroom on Windows Pictures/Lightroom on MAC

  Delete this folder and restart Lightroom

  

  Let us know if this helps

  ~ Assani

• "There was an error connecting to server Apple ID" not reliable CRL issue

  I started getting errors connecting to my Apple account on iTunes/App Store / iBooks etc., I noticed today.

  In an attempt to connect, it would return the message "There was an error connecting to server Apple ID"

  

  This debugging with Wireshark, I noticed that iTunes has been disconnected as soon as he saw the server SSL certificate.

  I opened the url field that he was using (https://gsa.apple.com) in Safari to see if reported certificate issues, and he confirmed that the intermediate certificate, although valid, could not be verified on LCR this is because he believes http://crl.apple.com/root.crl is unreliable CRL.

  

  Other computers, OSX, I checked are used the same certificate and validate the certificate successfully.

  I tried to set the certificate to always trust, but it has no effect.

  I changed Keychain Access-> Preferences-> Certificates-> certificate revocation list (CRL) of "Best tent", which seems to fix the problem, but I'm not keen on this change, because it could weaken the security of my computer compared to "demand if the certificate shows."

  Is it possible to restore the confidence of OSX CRL for this problem?

  In fact, I found just Keychain Access from another computer-> Preferences-> Certificates-> CRL (CRL) list is set to "Best tent", and causes 'Require if the certificate shows' the same question, so I guess it's a problem with the server Apple ID certificates themselves.

  I think I put the CRL settings to "Demand if the certificate indicates" some time to try to improve security. At one point, until recently, the https://gsa.apple.com worked with these settings so perhaps they changed the intermediate certificate, which presents the problem of CRL unreliable. It is http://crl.apple.com/root.crl and not https seems suspicious and could be the source of the problem untrustedness.

• verification failed - there was an error connecting to server Apple ID.

  Just upgraded to 10.11.4. Get this error when trying to login to icloud

  Verification failed

  There was an error connecting to server Apple ID.

  I can sign in here with my id, I can sign in icloud via my web browser to my id.

  What I can't do is connect from my imac (model 2015)

  Where should I go form here?

  I have exactly the same problem and I can check that if I create a new user on my MBP (current model of 15 "), I am able to use my Icloud account once again, but not under my main user. Thus, each suggestion found in the forums here:

  • Step 2 review the deactivation
  • Config of Flushing DNS or try another DNS server
  • Uninstalling an Antivirus snake oil product, I do not use

  did not help at all. But there must be something with my user account, the system itself seems to be fine as a new user account works with the same icloud account.

  This can happen now reasons:

  • I went to use the family option one or two months previously - unplausible that this has something to do with it

  Console output for two seconds after clicking on login to icloud prefs: line 2 + y has at least 20 times with different Classes but the same error:

  02.04.16 10:14:57, 409 akd [311]: NSURLSession/NSURLConnection HTTP load failed (kCFStreamErrorDomainSSL,-9807)

  02.04.16 10:14:58, com.apple.preferences.icloud.remoteservice [984 947]: CGContextSetCompositeOperation: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  02.04.16 10:14:58, com.apple.preferences.icloud.remoteservice [984 947]: CGContextClipToRect: context invalid 0x0. If you want to see the trail, please set CG_CONTEXT_SHOW_BACKTRACE environment variable.

  02.04.16 10:14:58, com.apple.preferences.icloud.remoteservice [984 947]: it has no sense to draw an image when [NSGraphicsContext currentContext] is zero.  It is a programming error. Break on Sub _NSWarnForDrawingImageWithNoCurrentContext() to debug.  This will be recorded only once.  This may change in the future.

  Next steps for me will be

  • hoping someone here has an idea, so I don't have to wast hours for this
  • try to restore a backup time new machine to a new user account (would be less work) - but this option I think that will lead to problems again. I'll let you know if it is a possible way to solve the problem.
  • From a user account from scratch and selectively import settings - there is no alternative option that takes time. Usually, this is not necessary and one of the reasons why I use a mac - only not to reinstall Windows every 3 months...

• Based on file format is not write to file, if there is an error defined by the user?

  While using the function in file to create a text file of some test results, I've noticed that if there is an error format on the error stream VI seems to work fine, but the Format of the file function is not actually write data to the file. I never noticed this behavior in Labview on any another function while if there is an error in this function does not work. As a general rule, if I don't want to run a section of the code when there is a mistake I have to surround themselves with a case statement and run the error stream in the case selector ignore.

  I've noticed this in a test application where I generate set errors when certain failures occur during my test, but I'd like when even the application to write my log file no matter if there is an error of no. In this case if my defined errors occur it does not write a log file. I deliberately to clear all errors before calling my VI of logging that I really don't want to do.

  So my question is why this behavior is present in the Format based on file? If it is expected that behavior are there other features that this happens with that I don't know everything?

  I have attached a VI that illustrates this behavior.

  The vast majority of the functions with an error to not not run if an error is present. In General, if a function runs with an error (i.e. close VISA), noted in the help it works even with a mistake.

• Flight Simulator 2004 install stops at 97% say there is an error with the file world.cab

  While the resettlement of fs2004, the installation stops at 97% saying there is an error with the file world.cab, this damaged disc 4.  Someone at - he found a solution to this?

  Thank you

  Well, if, as you say, the disc is damaged. The solution would be to get another drive.

  Although I would have a look at the following:

  Take a look at the following: http://support.microsoft.com/kb/258496

  I hope that, if necessary, you can get a free replacement disc.

• Outlook Express (XP) - Error Message "there was an error opening this message. An error has occurred. "When you try to open an e-mail.

  I can not open e-mails or addressbook from OE.

  When you open an email, I get the following messages, 'there was an error opening this message.  An error has occurred. "However, I can save an email on my desk (cause I can't open it) and receive the following error message while trying to open my office on the second dialog box AFTER the above message, Outlook express could not be started.  It can be installed incorrectly.  Make sure your disk is not full and you're not out of memory.  Contact Microsoft support for further assistance (0x8004104F)".  I'm not out of disk space or memory.

  When I try to open the address book within the OE, the error message says "unable to open the address book.  The AddressBook is may not be installed correctly.  I check that the WAB file is not read-only (as a matter of fact, I can open the WAB file directly by double-clicking in Explorer and email as an 'Action' very well).  Also, I check register and I have not any sharing with Outlook 2007.  I continue to receive emails and such mentioned, can send through the WAB file.

  There was an update of Windows by 18 points before it do not longer work.  I don't have a record of what has been installed.  I tried to come back a week to a previous restore point, but told me that nothing has changed.

  Help, please.  This has worked well for years.

  Remove Folders.dbx. If you can get OE open, create a new book of identity and address.

  In Windows XP, the files of user OE (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.

  The path to the message will be very similar to this:

  C:\Documents and Settings\Your User of utilisateur\Local Settings\Application Data\Identities\ {long string of letters & numbers} \Microsoft\Outlook Express

  With OE closed, find the Folders.dbx file and delete it.  Another will be created automatically when you open OE.

  Note these possible side effects:

  When you re - start OE, it will build a new index of all *.dbx files it can read and create a new Folders.dbx. However, understand that you will lose the mail directory structure and message rules will probably have to be edited.

• "Error while unpacking program, code 2" Please report to the author"Dragon 11 naturally speaking

  What does the error code "error while unpacking program, code 2" Please report to the author"means.  I started getting this error message yesterday, and there is some software that I can't receive now.

  Thank you!

  OK, here goes... my understanding is that you remove the update of microsoft KB2533623

  To remove this update of Windows KB2533623, follow the steps below:

  1. Click on "start > Control Panel > programs and features.
  2. Click on the link "View installed updates" on the left side of the window.
  3. Locate the update ' update for Windows Vista for x 64-based systems (KB2533623).
  4. Select the KB2533623 update and then click on the "Uninstall" button
  5. Once the update has been removed, restart the computer.

  It worked for me, BUT the charge is upgraded every time I restart so do not forget to turn off the automatic updates OR delete KB2533623 every time.

• popup message each startup (boot) - error while unpacking program, code 2.

  I have two messages popup one after the other, after each startup (boot)... it appeared after by mistake, you tap install updates day & shutdown, at first men... Please bear in mine, I have not upgraded to SP2 now have SP1... I think the required updates SP2... sometimes to invite me to install SP2, but refused.

  VISTA Ultimate 64-BIT

  1 MESSAGE POPUP
  "Error while unpacking program, code 2" Please report to author. »

  2ND MESSAGE POPUP AFTER CLOSE FIRST POPUP
  "An error occurred when loading library commonforms.dll::RegisterWindow

  It may have been removed. Please reinstall the Application. If the problem persists contact technical support. »

  Hello

  Have you made changes on the computer before this problem?

  I would suggest trying the following methods and check if it helps.

  Method 1:

  Put the computer in a clean boot state, then check if that helps you.

  How to solve the problem by running the clean boot in Windows Vista:
  http://support.Microsoft.com/kb/929135

  Note: Once you have completed troubleshooting, perform the steps in the step 7: to reset the computer as usual.

  Method 2:

  Run the Microsoft Safety Scanner and check if there are any threats found.

  Microsoft safety scanner: http://www.microsoft.com/security/scanner/en-us/default.aspx

  Note: If no threat found check if the file is necessary or not, then delete it.

  Also make sure that the popup is secure and then install if necessary. Windows updates are all secure and this is only the computer and Windows manufacturer. Optional updates are the manufacturer of the computer and the manufacturer of the application that you have installed. Important updates are Microsoft and it must be installed. I also suggest you try to install Service pack 2 on your computer and check if that helps.

  Learn how to install Windows Vista Service Pack 2 (SP2):

  http://Windows.Microsoft.com/en-us/Windows-Vista/learn-how-to-install-Windows-Vista-Service-Pack-2-SP2

  Hope the information is useful.

• [CARS] [root.sh FAILS] sqlplus: error while loading shared libraries

  Good,

  Let me explain the whole scenario...

  -Installation 11.2.0.3.0 RAC on RHEL 6.5

  -Silent Install (GI 4 RAC nodes)

  -Every success, except resolve.conf (that we do not use DNS to resolve the scan) prerequisites in the scene runcluvfy.sh - pre...

  -Installation launched, remote operations successful, root.sh script prompted and DAMN... gave below error

  = o/p of the root.sh on screen script =.

  User ignored the prerequisites during installation

  /U01/app/11.2.0/grid/bin/sqlplus - V... has no rc = 127 with message:

  /U01/app/11.2.0/grid/bin/sqlplus: error while loading shared libraries: libsqlplus.so: cannot open shared object file: no such file or directory

  Cannot add (property/value): ('VERSION / ") for the control point: ROOTCRS_STACK. Error code is 256

  /U01/app/11.2.0/grid/bin/ocrconfig.bin: symbol lookup error: /u01/app/11.2.0/grid/lib/libclntsh.so.11.1: undefined symbol: nnfyboot

  Cannot create or upgrade OLR

  /U01/app/11.2.0/grid/Perl/bin/perl-I/U01/app/11.2.0/grid/Perl/lib-I/U01/app/11.2.0/grid/CRS/install /u01/app/11.2.0/grid/crs/install/rootcrs.pl execution failed

  = root.sh records ends =.

  Now, this question is there for nearly 20 hours with Oracle Support and I have tried almost possible workaround suggested by Oracle Support (reboot, reinstall and...)

  Well I have no doubt in the Support of Oracle asking here on the issue, but to get chance that someone had already faced this same question.

  Now, I wish ultimately I find a culprit who are lower than o/p.

  =========================================

  [lib root@node1] # ls - ltr libsqlplus.so

  -rw - r - r - 1 grid oinstall 1477446 August 5, 2011 libsqlplus.so

  [lib root@node1] # ls - ltr libclntsh.so.11.1

  -rw - r - r - 1 root oinstall 52697691 December 10, 00:46 libclntsh.so.11.1

  [root @node1 lib] # ls - ltr libnnz11.so

  -rw - r - r - 1 root oinstall 7955322 August 17, 2011 libnnz11.so

  [root @node1 bin] # ls - ltr sqlplus

  -rwxr-xr-x 1 grid oinstall 9352 sqlplus August 5, 2011

  ======

  [@node1 grid grid] $ ldd /u01/app/11.2.0/grid/bin/sqlplus

  Linux - vdso.so.1 = > (0x00007fff7e72a000)

  libsqlplus.so = > not found

  libclntsh.so.11.1 = > not found

  libnnz11.so = > not found

  libdl.so.2 = > /lib64/libdl.so.2 (0x00000031f7400000)

  libm.so.6 = > /lib64/libm.so.6 (0x00000031f8400000)

  libpthread.so.0 = > /lib64/libpthread.so.0 (0x00000031f7c00000)

  libnsl.so.1 = > /lib64/libnsl.so.1 (0x00000031f9c00000)

  libc.so.6 = > /lib64/libc.so.6 (0x00000031f7800000)

  /lib64/ld-linux-x86-64.so.2 (0x00000031f7000000)

  ========================================
  

  your questions and comments are welcome...

  Re-install gcc libraries and test it.

• Error while executing script root.sh on the nodes at the RAC 11 g installation

  Hello friends,

  Here, I face an error while I run the root.sh script. During the installation of grid RAC, he asked a few dependencies of prereq. There are several .rpm files that were the prerequisites for this installation. I ignore them and I continued the installation. Now, he finally threw an error when running root.sh script. I tried to install several .rpms acquisition of information from the internet, but always this script does not work here.

  Please, suggest what should I do at this point.

  

  You guys could help me out here, how I need to go further.

  Simple google search will give you missing RPM. try to install and see if that solves the problem

  https://gruffdba.WordPress.com/2012/11/06/11gr2-grid-install-clscfg-bin-error-while-loading-shared-libraries-libcap-so-1-cannot-open-shared-object-file/

  Don't forget, you need up-to-date existing deconfig install and run root.sh as mentioned below article

  https://desaitaral.WordPress.com/2011/06/13/Oracle-Linux-6-1-and-libcap-so-1-cannot-open-shared-object/

  Another article with the same question - https://taliphakanozturken.wordpress.com/2013/03/02/clscfg-bin-error-while-loading-shared-libraries-libcap-so-1-cannot-open-shared-object-file/