There is an error with my computer, it does not connect with my router. It works with my usb 3g modem, but not with my router. My router works with other devices.
There is an error with my computer, it does not connect with my router. It works with my usb 3g modem, but not with my router. My router works with other devices.
I tried to connect my xbox to my computer to xbox live via the 3g router, but I was unable to. According to me, there is something wrong with the network card, since neither the wifi (wlan?) nor the lan connection seem to work.
I harnessed connected my iPod, Xbox 360 and Nintendo DS for her, but not my computer. Please help me, what wrong with my computer?
Hi GustavTak,
1. you have made no changes to the computer before the broadcast took place?
2. do you get an error message?
Try the steps from the following link:
Windows wireless and wired network connection problems
http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
Additional information:
Network connection problems
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
Set up a wireless router
http://Windows.Microsoft.com/en-us/Windows-Vista/set-up-a-wireless-router
Tags: Windows
Similar Questions
-
My computer stopped working wireless, the error message says "this wireless does not work on this computer ' even if another computer at home has no problem with wireless services. I've tried everything and my router is intact. My Protection of Kaspersky flags are gone from green to red and says threats have been detected. What should I do to get back on the wireless.
original title: Wireless not working not
Hello
1 have had any changes made on the computer before the show?
2. what operating system is installed on the computer?
Method 1:
Check the link and try to run the troubleshooter to check if it helps.
Windows wireless and wired network connection problems
Method 2:
Try to run Microsoft Safety Scanner for any malware or spyware infection and check if it helps.
http://www.Microsoft.com/security/scanner/en-us/default.aspx
Note: the Microsoft Safety Scanner expires 10 days after being downloaded. To restart a scan with the latest definitions of anti-malware, download and run the Microsoft Safety Scanner again. The data files that are infected must be cleaned only by removing the file completely, which means that there is a risk of data loss.
-
Just got a call from the India, claiming that they had been notified that there was an error in my computer? Is this normal? About an hour earlier, I have defraged my computer?
Hello
It's a SCAM
they want or money on your part for programs without value or make an identity theft on you to get even more money and get your internet banking passwords and credit card information, you get allows you to download the software to 'fix' or 'test' for your computer
read this:
http://www.Microsoft.com/security/online-privacy/msName.aspx
Microsoft has none of the unsolicited telephone calls to help you fix your computer
In this type of scam cybercriminals are calling you and claim to be of Support technique Microsoft. They offer help with your computer problems. Once scammers have earned your trust, they try to steal and damage your computer with malicious software, including viruses and spyware.
Although the law enforcement can trace phone numbers, often authors use pay telephones, disposable cell phones or stolen cellular phone numbers. Better avoid fooling themselves rather than try to repair the damage afterwards.
Treat all unsolicited sceptically telephone calls. Don't provide personal information.
If you receive an unsolicited call from someone who claims to be from Technical Support Microsoft, hang up. We do not have such calls.
If you think you might be a victim of fraud, you can report it. For more information, see: what to do if you think you have been scammed.
-
How can I know if Migration Wizard works... I have the gray wheel on the new mac and it's after a msg error saying there was an error with iCloud (in red). What is happening with a MacBook Pro refurbished, I just got today. Thanks for any help.
The guarantee gives the right to the free phone support for the first 90 days of ownership.
-
While the resettlement of fs2004, the installation stops at 97% saying there is an error with the file world.cab, this damaged disc 4. Someone at - he found a solution to this?
Thank youWell, if, as you say, the disc is damaged. The solution would be to get another drive.
Although I would have a look at the following:
Take a look at the following: http://support.microsoft.com/kb/258496
I hope that, if necessary, you can get a free replacement disc.
-
I have an account with photography lr and ps with monthly payment. I would like to change my card kredit details, but there is an error with an address. There is a notice that the zip code is wrong, but I don't know I put it in correctly. Please give me an advice what to do, because my payment cannot be achieved. Thank you, Agnieszka
Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===>===> NOTE DAYS AND TIME
Don't forget to stay signed with your Adobe ID before accessing the link belowCreative cloud support (all creative cloud customer service problems)
http://helpx.Adobe.com/x-productkb/global/service-CCM.html
-or by phone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html -
I try to start Photshop cc but I still get the following messages: I've updated CC Office App and Applicationmanager butt always received you same error. Someone?
Error
There was an error with this action. Try again later.
4c861a59-6ea6-4f93-8a42-d38f6c4000bd
Problem solved by removing the opm.db. file!
Solution 2: gecachte aanmeldingsgegevens gebruiker op van schoon.
Rimuovere het bestand opm.db.
- Creative Cloud-toepassing Voert.
- Navigeer naar map OOBE.
Windows: [Systeemstation]: \Users\ [username] \AppData\Local\Adobe\OOBE
Mac OS: /Users/ [username] / folder/Library/Application Support / Adobe / OOBE - Rimuovere het bestand opm.db.
- Start the creative cloud.
-
Computer XP does not start all of a sudden.
My computer is a HP Lap Top Model zd8000 bought in 2006. Never had a problem with it before.
Drive hard Self Test error #1-07 Fail.
How can I find the meaning of this disc hard test error message?
Thank you
I tried the suggestion using chkdsk/r
The computer ran for a long time, but the computer worked once the process is complete.
First thing I did was back up my data, I was real worried.
Thank you very much!!!
-
Original title: bad start.
On May 15, 2013, I was prompted to download 8 updates from Microsoft. Since then when I turn on the computer, it does not show my office. It comes with a white screen. The only way to see the desktop is at the stop 'wrong' to turn off the power to the computer. Then I reboot, it just asking if I want to boot up normally, I say Yes and all is well on the office. Seems related to downloads of May 15, 2013. Any ideas?
Hello
Method 1:
I suggest you to select last known good Configuration in Windows Advanced options and check if it works.
To do this:
a. restart the computer and press the F8 key for about four to five times.
b. you will see the that last known good Configuration in the Advanced Windows options.
c. Select last known good Configuration and press enter.
Method 2:
See the article and check if that helps:
What to do if Windows does not start correctly
http://Windows.Microsoft.com/en-us/Windows-Vista/what-to-do-if-Windows-wont-start-correctly
For more protection, use System Restore backup and restore, which is designed to help save email, photos, documents and other personal files.
Note: when checking your drive hard for errors, if bad sectors are found, it tries to repair this sector and if all the available data may be lost.
Let us know if it helps.
-
My computer cannot connect to the internet, the signal is excellent in the modem, but the computer does not recognize that there is a link. What could be wrong?
Hello
- What connection do you use?
- What is a wired or wireless?
- What happens when you try to start Internet Explorer?
- You receive an error message?
You can check these links:
http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-network-connection-problems
http://support.Microsoft.com/kb/956196
Warning: Reset the Internet Explorer settings can reset security settings or privacy settings that you have added to the list of Trusted Sites. Reset the Internet Explorer settings can also reset parental control settings. We recommend that you note these sites before you use the reset Internet Explorer settings
-
Hello
I get this error when you try to run the sample of cards on the corrugation Simulator:
Oh, Snap! Build request failed with the message: [ERROR] an archive or directory does not exist in the specified path: "/ Users/Calgacos/Library/Application Support/Google/Chrome/Default/Extensions/cnijnnaimeaacneklcndcafbnkeicckh/0.9.16_0/services/node/node_modules/rbd/Packaged/Maps.zip".
The .../rbd/Packaged folder is writable and the Maps.zip will be created in the folder ~/RippleSites/Maps/Packaged. With the help of Mac, the latest versions of everything. The application runs in undulation ok, but I can't throw on the SIM BB10.
Someone else have this error and know why?
PS the Maps.zip does not get created (or copied) in specified folder, of course, but why?
PS try another application and it worked but is too has not put its zip file into the folder... rbd/Packaged. I guess it should not but leaves me clueless as to whats wrong with cards.
Thank you
The two directories (in the extensions directory and maps project directory) have permissions to 777.
But you gave me an idea...
It turns out that simply by putting
"Packages".
in setting output wasn't enough, I need the full path
for example: "/ Users/username/RippleSites/Maps/packed."
and presto, now it works!
Thank you!
-
Hi, I'm trying start the IKE and AUTHOP service from the SERVICES screen but I get this error:
Windows could not start the IKE and Authip IPsec keying service modules on the local computer. Error 1075 the dependency service does not exist or has been marked for deletion.
original title: ike and authip error 1075 the dependency service does not exist or has been marked for deletion
Hello
Remember to make changes to the computer before the show?
You can follow the below methods:
Method 1: Restart Windows and try to start the Security Center service.
If you still receive the same error, make sure that the WMI service is launched and running:
(a) click Start, run , and then type Services.msc
(b) double-click Windows Management Instrumentation
(c) set its startup type to Automatic
(d) click Start to start the service, and then click OK
(e) restart Windows.
Method 2: Restart the service
Windows logs an error if the service IKE and AuthIP IPsec Keying Modules or the driver does not start, or suddenly, they end.
To restart the IKE and AuthIP IPsec Keying Modules service:
To perform this procedure, you must have membership in the local Administrators group, or must you have been delegated the appropriate authority.
(a) restart the service. You can do this from a command prompt or in the snap-snap-in Services Microsoft Management Console (MMC). Do one of the following:
· Start an administrative command prompt. Click Start, click principally made programs, Accessories, right-click guest, and then click run as administrator. At the command prompt, run the command net start ikeext.
· Click Start, type services.msc in the Search box and press ENTER. In the column name of the Services snap-in, right-click on IKE and AuthIP IPsec Keying Modulesand then click Start.
(b) if the attempt to restart the service fails, restart the computer. This forces all related and dependent services to restart.
(c) if the error persists after restarting the computer, then the executable files for the driver or service may be damaged, and the operating system must be reinstalled.
Note:
You can check that the IKE and AuthIP IPsec Keying Modules (IKEEXT) service runs by using the Component Services Microsoft Management Console (MMC) or the net start command line tool.
You can check the link: http://technet.microsoft.com/en-us/library/cc733299 (WS.10) .aspx
Method 3: Run a scan of the System File Checker.
http://support.Microsoft.com/kb/929833
It will be useful.
-
Hi all
I use the model Match 4 IMAQ to detect the angle of rotation of an image of model. However, it displays the error: "error 1074395241: the model descriptor does not contain the data required for the corresponding rotation invariant." What exactly is the problem? How to solve this problem? The details are explained below.
My project is a bit complicated. Part of the block diagram containing the IMAQ Match model 4 is illustrated below:
The source image is a series of images of images read from an AVI video (I used a loop for to process the images frame by frame). The image of the model is an area of the first selected image. So, this means, the user selected the ineterst object in the first frame of the video, and each of the following images to find the object corresponding interest & determine its rotation angle. When I run the above diagram, there no error. However, it shows the angle of rotation zero no matter what it is 'really '. Therefore, I changed the schema by adding parameters, listed below:
But in this case, when I run it, it shows the error I mentioned in the subject line.
If you need more information about my project to identify the problem, please let me know.
Thanks in advance.
S ' Please example from model that comes with labview First
Go to labview Help > find examples and you can search for example.
-You create model with angle range and what kind of special criteria you want to use.
-To do this you must use IMAQ learn pattern before using IMAQ model Match 4
Reference:http://zone.ni.com/reference/en-XX/help/370281U-01/imaqvision/imaq_match_pattern_4/ -
service pack 3 error loading 'a components file does not match the verification information present in the component manifest ".
I have SP2 with all updates, I have this error message after the failed attempt to load service pack 3.
Hi Carl_Focus_Phone,
· Is confined with Update Service Pack 3?
· Did you do changes on the computer before the show?
You can follow the steps in the article in the Microsoft Knowledge Base and check if that helps.
How to troubleshoot an installation fails on Windows XP Service Pack 3
http://support.Microsoft.com/kb/950718
You can also see the following articles for more information:
Steps to take before you install Windows XP Service Pack 3
http://support.Microsoft.com/kb/950717
Learn how to install Windows XP Service Pack 3 (SP3)
http://Windows.Microsoft.com/en-us/Windows/help/learn-how-to-install-Windows-XP-Service-Pack-3-SP3
Let us know if that helps.
-
Original title: deleted Ethernet adapter
Hello
All trying to fix my computer run Registry cleaners, I managed to delete my Ethernet adapter, I have taken steps to try to fix this problem and have been advice to visit Microsoft support for help.I have a Dell Dimension 5100 and am running Windows XP, I am unable to connect to the Internet via an Ethernet cable but I am able to connect with other devices.First of all, I contacted my Internet provider which forced me to various checks to see why I was getting a message saying acquiring network address and it seemed that I had no IP address and could not connect. He eventually get look in the network adapters Device Manager, he demonstrated Intel PRO/100 VE network connection that is activated in the State shows that it works, but there is no Ethernet adapter shown in this place.I tried to insert Dell drivers and utilities disk, but that does not change.I tried to download on an other computer files from dell that look like they are pilots.I tried to set up a new connectionNone of what I tried so far seems to have worked, can anyone suggest what I can do to fix this?Thank youKevinHello
1. what you're trying to fix by running registry cleaners?
2. How did you remove Ethernet card?
3. How are you online using other devices?
4. What are the devices are?Intel PRO/100 VE network connection is the Ethernet adapter on your computer. The following articles may be useful:
How to troubleshoot possible causes of Internet connection problems in Windows XP
http://support.Microsoft.com/kb/314095
Windows wireless and wired network connection problems
http://Windows.Microsoft.com/en-us/Windows/help/wired-and-wireless-network-connection-problems-in-Windows
Maybe you are looking for
-
HP G72-227WM: hp adminorpoweronpasscodes
administrator or power on access code necessary to disable the 66037749 code came I access codes to keep on my hp
-
Recently, I bought this laptop from a friend and it has a bios lock, tried different codes out of the site, but now it says system disabled with this code [09310] can someone help me I don't know what to do.
-
Whence this giant puddle of memory?
So I'm mopping up a giant puddle of memory from under my computer and I noticed that the memory is just outside IMAQ learn model 2 VI. Turn, when IMAQ learn ringtone 2 decides that a template image doesn't have enough contrast, he gets scared and wet
-
I can't get internet connection for any browser or program, in addition to Firefox.
All my programs on my computer except Firefox, cannot connect to the internet. I can't use any programs that require the internet connection, also used by Internet Explorer. I tried the difficulty usually where I go to Internet Options and uncheck th
-
SIP message with 488 here is not Acceptable
Hello, I'm having this problem. I have read the documentation and I look in this forum for similar problems.Seems is a Codec problem. Service provider asks a g711alaw. However, I already change the codec, transcoder configured which is register with