There is an option in the bios to set the sata drive * IDE *-mode?

Similar Questions

• There is no option in the bios to enable the memory remapping? !

  There is no option in the bios to enable the remapping... my last windows 7 x 64 memory showed all my 4 GB of ram... but however I have clear now to install win7 x 64 or x 64 pro win8 it said usable 3.79 and info pc does not recognize my nVidia GPU (only graphics card intel HD recocnizes) while the nVidia control panel can recognize GPU and intel HD graphics together... my system is asus u36jc notebook... help is there Please...: |

  Hello

  Please contact Miceosoft answers.

  Memory remapping option is not available in the BIOS and we can't really. If you do not want to remap the memory, turn the computer off, remove the cover from the chassis and modules of memory Exchange (only if there is more than one).

  I assume you are using an Intel core i processor series, 2nd or 3rd generation. Usually when your pc doen't need many complex graphic treatment, the processor works as the graphics processor. In this case, when you check with Windows, it will show only currently work graphics processor - Intel HD graphics card. In addition, you can switch between graphics, to know what is the default value. In this way, if you select graph nVidia, Windows will display it info.

  I suggest to keep the setting of graphics as such for extended battery backup.

• Bluetooth is disconnected and there is no option in the preferences to reactivate

  I have an iMac early 2009 with el capitan.  Bluetooth worked normally and then quit.  There is no option in the preferences to reconnect.  no option to turn on or off.  How he set it up again?

  A reset on a SMC:

  Reset the management system (SCM) controller on your Mac - Apple Support

  Bluetooth in the SystemPreferences Panel looks like this:

  If it is not after resetting the SMC, do a screen shot and post it here.

  

• I'm trying to set up an Ad Hoc network, but there is no option for the Ad Hoc network configuration when I go into the network and sharing Center.

  I looked at how to make a point of my computer because I have a usb wireless internet device for my laptop and I tried to get an ad hoc network setup but there is NO option for the CONFIGURATION of the NETWORK AD HOC when I go to network and sharing Center... what should I do?

  original title: ad hoc isn't here...

  Hi NickBean2,

  You can refer to the following articles and see if it helps.

  Set up a computer-to-computer (ad hoc) network
  Solve problems, find wireless networks

  Hope this information is useful.

• After the clean install of windows 7, it gives an error saying that there is a problem in the hard drive.

  * Original title: hard drive

  I have a lenovo laptop, processor Intel i3, 500 GB hard drive. After the clean install of windows 7, it gives an error saying that there is a problem in the hard drive. I ran chkdsk looking for bad sector and its display 6000 KB in bad sectors. After completing the audit when it began to restart its stuck when the windows logo appears. What should I do? Reinstall the windows help?

  Run the hard drive HD diagnosis extended CD scan manufacturer to know with certainty the State of the reader.  If your brand has no bootable diagnostics in the link, use Seagate Seatools burned onto CD or SeaTools for a USB key .  Follow this with a full check disk command from the installation media kicked prompt know with absolute certainty the State of the reader.  If he repeated the errors after you run the two tests twice, I replace it or at least keep everything backed up in real time.

  If by chance the drive past diagnosis then compares the steps you've done with the best possible Clean install Windows 10 in the link, you can do more if it varied too - especially if the partitions were not deleted during install.  If you do then I additonally run own Diskpart command command line of the punt media accessible to the first screen after startup by pressing SHIFT + F10 keys, or through the repair your computer on the second screen.

• where is playing strong option on the new drive to download?

  Where is playing strong option on the new drive to download?

  Hello

  You get this option under the edit in the new MS Reader tab.

  Launch the CD player > go to Edit > read aloud.

  Concerning

  Sukrit diallo

• Satellite A300 - where can I find the SATA driver?

  Where can I find the SATA driver for Toshiba Satellite A300 1MW for Windows XP?
  I tried to find it here:
  http://EU.computers.Toshiba-Europe.com/innovation/download_drivers_bios.jsp

  There are a lot of drivers, but none for SATA.
  and here: http://downloadcenter.intel.com/
  Here I can't find appropriate for my model injector.
  Thank you in advance for your help!

  Hello!

  The SATA drivers are in the Intel Storage Manager, so you need to download this package.
  You can find it on the Toshiba site and on the Intel Web site.

  Check again for Intel Storage Manager Web sites.

  Good bye

• T7610 SAS (LSI 2308) precision controller - set the SATA drives?

  Hello

  The controller is SAS RAID LSI 2308 integrated in the T7610 of precision allows to attach SATA hard drives in a non-raid configuration?  I just realized this system has only TWO internal SATA connectors, but I need THREE internal SATA drives.

  What I was asking is if the SAS ports will allow the connection of SATA drives that are not used in RAID mode?  This way I can add my 3rd SATA HDD to a SAS ports.

  Thank you
  M

  We are experiencing the same problem/issue with the T7610 of accuracy by using the controller LSI-2308.  The end result that we would like is to have 2 drives separated - do not use the raid controller.  However, the CD Rom takes up one of the sata drive connections.

  Anyone been able to disable the raid and then controller, seeing the disks during the installation of windows needs to see?

  Currently, I have 2 blank drives (3 TB (ea.) and windows setup does not see the discs - but the raid controller load very well through the configuration.

  What should I do to get readers in windows?  There the meta that needs to be removed?

• There is no option of the photoshop 3d

  There is no 3-d option at the top of my cs6

  Hi there-

  If you use extended PS6, there should be a 3D menu in the main menu bar:

  

  3D features available for PS CS6 Extended and not for computers running Windows XP.

  If you use Extended CS6, here are some tips for access to 3D tools.

  You can change your workspace to a 3D-based format by clicking on the menu in the upper right corner and selecting 3D.

  

  If you click it, you will be able to select "3D", which will fill your workspace with 3D tools. You can always get back to the basics by selecting from the drop-down list even.

  

  Alternatively, you can keep the same workspace and add the 3D flyout by clicking window > 3D

  

• exit Microsoft Office express - when compossing an email there are several options on the tool bar I'm not able to use.

  When you write an email in microsoft office outlook, all options on the tab "Basic text" Message are gray clear - I can't use them.  Under the tab Options, I can't use the tab "Themes" Insert the only option that I can use is "Include".

  How can I fix it?

  Thank you

  Debby

  Hello Debby,

  ·         Are you referring to Outlook Express?

  Check if Outlook Express repair may solve the problem.

  An Outlook Express basic repair kit

  See also:

  Compose and send e-mail Messages using Outlook Express

• not enough options for the SSD drives?

  I intend to buy a desktop XPS 8700 special edition. I am disappointed that it doesn't give options for this model - for hard drives, only "2 TB 7200 RPM SATA Hard Drive 6.0 Gb/s + 256 GB SSD"-which is obviously a good combination, but for me, I think that a smaller SSD drive would be nice. "" Otherwise, I like the rest of the system. A friend who built his own PC says it has installed an SSD of 128 G and it is sufficiently large with Win8, MS Office, Photoshop and other large programs installed.

  So it of just a comment, is not a problem, but I hope that Dell would offer more options, including a drive to 3 or 4. A Dell technician suggested going to road work stations - but when I looked there, I was a little confused on the readers - workstations all seem to have several readers, probably for Raid configurations, which is something over my head and on my needs.

  Or is it a good idea to have a lot of free space on the SSD drive?

  Hi Hellogoodby,

  Thanks for your comments. It isn't that much of a difference in cost between the 128 GB and 256 GB SSD. Dell is probably buying in bulk from the right and customer demand now, most people want 256 GB or more. You are absolutely right that 128 GB is plenty for the OS and applications. I have a 250 GB Samsung Evo and have used less than 50 GB for the operating system, office and all my other apps.

• Is there a way to hide the menu in windowed mode VMware Workstation 8 bar?

  While in windowed mode is there a way to hide the menu bar on a crowd of Win7?  This menu bar is absolutely huge (about 2 x as large as it should be!) so I was wondering if it was possible to get rid of it?  I know it was possible in older versions, because I found some guides on how to do it.  These guides apply to Workstation 8.  I don't want to use the unit because it's too hard to keep the instances of BONE separate and organized in a meaningful way.

  If any VMware staff are reading this, I would recommend that VMware uses a menu bar of title as Firefox 8 on Windows 7.  With the little drop down menu built into the title bar of the window instead of a space hogging the menu bar stretched all the way in all top of the window.  Or at least implement a combination of keys in option show/hide the menu bar. Please?

  See if this thread helps you not at all:

  http://communities.VMware.com/thread/329429

• Question 1: Is there some sort of privilege get admin and the State of return permanently? Question 2: Is there a way to make the disk drive C E?

  Problem 1: Window 7 and I have fought each other and Windows 7 is to win. I am the owner, administrator and only users of my computer 7 Professional and I can't do anything that requires an admin and most of the time it excludes me everything to do. I need to use this computer, so before you take a hammer, is it possible to give me permanent permission to admin? I do too many things that require admin to play with the standard user. I have a Windows 7 Professional, Internet Explorer 9, and Google Chrome, drive C has about 120GB and 1 TB E. I don't know why the people that set up this computer for me did it but now I have to fix, because drive C is on the point of falling.

  Problem 2: My C drive was never large enough to handle what I need, the E drive but how to switch the two? I tried the file transfer and some work and some have just done battle with Windows 7 worse and more complicated. Now the system is all messed up. It will not save, it wont recover, it does not work most things because the C drive is full and no matter how many things I delete or remove the C and put on E drive C never goes back down. I am a student adult and I guess I know just enough to be dangerous, but not enough to make a difference but how am I supposed to learn if I don't try?

  Unfortunately, your two statements are incompatible:

  • Now the system is all messed up. I tried to correct things, but there are still so many problems.
  • I really want to start from scratch.

  Your chances of fixing your problems are close to zero.
  The chances of an expert of your fixing problems are slightly higher, but only if let you it sit in the front of your machine and give him lots of hours trying different things.
  Since you seem to be dependent on a work machine, you must consider the following approach:
  1. Back up your data.
  2. Check your backup on another computer so that it is accessible.
  3. Perform a destructive factory restore.
  4. Reload your software.
  5. Create an image of your installation and store it on an external support.
  6. Check if the image is usable.
  7. Wait until the dust has settled (two to four weeks), and then create another image.
  8. Create a new image, once every six months.
  9. Always keep two more recent images.

  Many people skip the stages 2, 5, 6, 7, 8 and 9. Are absolutely essential for a robust installation that needs a quick recovery path. Skip the following steps allows you to save a bit of time at the start but cause a lot of grief later.

• [SOLVED] Problem - cannot install Windows XP on C dive - only option is the D drive.

  Hello

  I'm doing a clean install of windows xp pro on a hard disk with unallocated space at the front of the drive and a primary partition containing the data at the end of the training.

  I want to install windows xp pro on a primary partition on the front of the disk on drive C.

  Here's my problem:

  When I was installing windows xp pro, I noticed that when I created a partition in the unallocated space at the front of the car where I wanted to install windows xp pro, that I couldn't C as a drive letter for the installation drive - d only.

  I ran the installation at the end and Yes, windows xp pro did install on drive D - this isn't what I want - I want it on the C drive.

  Can someone tell me how I can solve this installation problem.

  Should I run a partition boot CD and set up a primary partition on the front of the drive before installing windows xp pro?

  Thank you very much.

  I solved this problem by following these steps:

  1. I installed a second hard drive (old sata drive).

  2. I installed windows xp on the second hard drive.

  3. I photographed the windows xp install from the second disc on the first hard drive.

  4. I deleted the second disc.

  5. I've rehearsed with my other computers.

  Everything works fine - just takes a little longer than expected.

• Satellite Pro P200 - 17 c: Win XP won't load - installation of the SATA driver

  Hello

  I have a satellite pro p200 - 17 c I've had good years, allways worked without any problem.

  Last week when I booted the laptop, windows won't load and I find myself safe mode selection screen. No options whatsoever me to windows loading, I tried F8 and still nothing.

  I tried the restore cd that reimagee the drive but I get the same thing, I tried a new hard drive, once again the same.

  But if I try to load windows from an OEM to install that software does not because it is a sata drive and there is no floppy drive. I have an external floppy drive I use, but it is not known now.

  Any ideas or suggestions?

  Hello

  Go to BIOS and set it to default settings.

  In this case the SATA mode must be on AHCI. In this case the SATA drivers are required to install the Windows operating system. But as much as I know that Windows 7 already contains the SATA drivers if usually you don t had to add SATA drivers while OS installation the installation program.

  However, here is a nice HowTo document that helps you add SATA drivers for Win XP installation disc.

  + How to integrate a SATA AHCI driver into a Windows XP Setup CD.
  http://APS2.toshiba-tro.de/KB0/TSB85017Z0000R01.htm

  + How to integrate the AHCI driver during the installation of Windows XP.
  http://APS2.toshiba-tro.de/KB0/HTD9401AN0000R01.htm