There is no available active mixer devices...

Similar Questions

• Satellite Pro: Good question - there is no available active mixer device

  When I start my computer, the sound card works fine. I click on the volume control and it works.

  In a few minutes, he cut. I click on volume control and get a pop-up message:

  "There are no active mixer devices. To install mixer devices, go to control panel, click Printers and other devices, and then click Add Hardware. This program will be closed. ""OK "".

  I downloaded the Realtek drivers (it's pilots did not update so that they are the original ones) and reinstalled them. I tried RealPlayer, WMP, QuckTime.

  I tried to live with it, but it's really annoying me now.

  Anyone has any ideas, please?

  Thanks for reading :)

  Hello

  Strange could you please check if the "Windows Audio" service has been disabled.
  Go to RUN and type "services.msc", scroll down to "Windows Audio" and make sure it is running and/or standing on "automatic".

  This service should always runs.

  You can also try to remove the sound card and after restarting again the OS notebooks should recognize the card even once.

• Not the 'Volume Control', I get the message "there are no available active mixer device." ____

  I went through the troubleshooting help utility and when I opened 'Volume Control' I get the message "there no activemixerdevices available". I tried different things, but still no sound can u tell me how to recover the volume control because when I click on it says "there no activemixerdevices available". and when I go to control panel, sounds and audio devices it says no device and grayed out. Please HELP NEED HELP URGENT

  Update:

  I mixer by updating the driver but when I go to the sound and the device it says "No. Audio Device" in the volume tab my speakers work perfectly with my mp3

  If not, do that, if the above does not work:

  Insert your XP CD in your drive. Do not start. Then:

  Start > run > type in msconfig > OK or Enter > click on extract files > then file to extract = sndvol32.exe > then tap your CD-ROM drive as the source > extract to c:\windows\system32 > can Extraxt > crush is required > if it does not re-post.

  See you soon,.

  Jerry

• No sound on the computer and not getting the error "no available active mixer devices".

  Original title: sound problems

  Hi, my name is JF. I'm having the VERY SAME problem. A few weeks all of a sudden all I hear is silence. NO SOUND!  I bought new speakers and nothing.  He said: no available active mixer device.  I have a Dell Optiplex GX620 desktop computer, not a laptop.  Please help.

  Hi Juicyface,

  · What is the service pack installed on your computer?

  Method 1:

  Check the status of the device in the Device Manager and check if it has no yellow exclamation or a question mark, and if no error code is listed in its properties. To do so follow the steps below:

  a. click on start

  b. in run box type: devmgmt.msc

  c. search for audio device

  Method 2:

  Run the fix it and check the results. Link: Diagnose and automatically repair audio playback problems:http://support.microsoft.com/mats/no_sound/en-us

  May you enjoy a look at the link below: how to troubleshoot sound problems in Windows XP:http://support.microsoft.com/kb/307918

  With regard to:

  Samhrutha G S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• No available active mixer device, install mixer devices

  Problems to get the sound on my computer dell laptop d510 windows xp 2002. Tring to figure out what it is necessary to install and had to get it. Message keeps saying no active mixer please help

  Likey file sndvol32.exe corrupted on your computer. Try following these steps to re-install the Windows volume control for the problem. You will need your restore disk system or your system restore partition to copy the correct files to repair Windows.

• No sound - get the error no active mixer device or no audio device installed

  Original title: downloads for devices sound cards/audio/active mixers
  Hello, I got my laptop crash currently and when I came back, I have no sound except for the beeps. I can't hear CDs or audio files on different Web sites. I can livestream and see a video, but not hear. I plugged headphones and have the same results. I get the error codes are no active mixer device and there may be no audio device installed. I have a windows xp operating system. I don't know where to go to start a download for sound cards.
  Thank you.

  Miloz

  We can try to install the drivers manually. It seems that every time that your device has crashed, someone reloaded Windows without having to install the device drivers.

  Let's start by trying to install the audio driver first. This one we might have to do it manually, but the others should be automatic. This gives a test:
  1. go to: http://downloads.sourceforge.net/sevenzip/7z465.exe and download the 7zip archive manager
  2 download, register, and install the utility on your computer
  3. once the utility installed, go ahead and re - download the audio driver package
  4. save the package on your desktop (or somewhere easy to access)
  5. once the package downloaded, find him, do a right click and choose "extract here...". "or something similar in nature. Basically we will extract the contents of the package and install it manually
  6. once the content is extracted, click START
  7. in the menu START, right-click on "Computer" and choose "Properties".
  8. in the upper left corner, click on Device Manager.
  9. find your Multimedia Audio Controller, right click and select 'Update Driver'... »
  10. click on "Browse my computer for driver software".
  11. click on the button 'Browse' at the top
  12. place where are the files extracted from this driver package
  13. Browse in the folder extracted and select the listed file. If there are several of those who choose an and and if it's just, the Setup will continue. If this is not the case, the installation program displays and error and then you just go back and try the alternate
  14. from there, the installer should walk you on the rest of the steps to manually install the driver package
  As far as your other drivers go, I would recommend going to the bridge site and looking for a driver of Modem for your computer model. The audio driver should be supported at this stage, and the Ethernet driver can be a joint wireless adapter you have. You may need to find a driver for it on the site of the gateway, OR if you bought the adapter you need to go to the device manufacturer's Web site and get you a driver there.
  Let us know what happens
  Thank you!

  Ryan Thieman
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• I have the same problem I've seen on this system already, but I don't see an answer, I get the error message no is "no active mixer devices".

  I get the error message is that I have no active mixer device and I cannot hear anything in the MSN Web site to itunes

  Type of computer?  You must go to the computer manufacturers website and download the correct driver. I.1

• no active mixer device or sound card

  audio device

  What version/brand computer do you have?

  Have you recently installed/uninstalled all new software?

  Have you recently done a system restore?

  You can also watch:

  http://support.Microsoft.com/kb/307918

  There is a utility from Microsoft 'Fix It' to the URL above you can try running.

• There never was a fix or error code "no available active device Mixer" on windows xp.

  Recently, I have loaded Netflix on my laptop. Now my sound does not work.  Is there a place to download the mixer device driver to get her back?  Everyone knows the problem after using Netflix? Is there a solution?

  My hardware is an IBM T43 laptop.

  N °

  IF this is the real problem, you must extract the file from your XP CD.

  Put your XP CD in your drive, do not let it autostart.

  Start > run > type in msconfig > OK or enter > excerpt from file > file to extract = sndvol32.exe > select your CD/DVD drive as source > extract to c:\windows\system32 > get on with it, overwriting if necessary. Re-start.

  If it does not, then re-install your drivers of its specific on XP.

  See you soon,.

  Jerry

• No audio; possible driver issue. "There is no available mixer devices."

  I can not play sounds on my computer: no CD, no mp3s, not iTunes, no system sounds, nothing. When I try to open my sound engineer (Volume control), it gives me the following error message:

  "There is no mixer device. To install mixer devices, go to control panel, click Printers and other devices, and then click Add Hardware. This program will be closed. »

  I tried adding hardware, uninstall and re-install my drivers, check the physical connections and power cords, restart, and ensure all relevant in services.msc is set to automatic. Nothing did. Many devices (under audio, video and game controllers) device displays Manager works not properly: Audio Codecs, Legacy Audio Drivers... SoundMAX Integrated Digital Audio, etc. When I check the properties of these devices, it gives the following message appears in the status of the device (general tab):

  "A driver (service) for this device has been disabled.  Another driver can provide this functionality. (Code 32) »

  They are activated, the only problem seems to be one or more drivers. But the update does not resolve the problem and troubleshooting of Windows doesn't help.

  I worked with someone in the Bleeping Computer to remove malicious software, and we have identified a few days that my machine was clean. The tech who was helping me said the audio problem is a separate issue from malware, but I suspect that the malware could have damaged something or change my settings. I thought it might have been accidentally caused by my use of AutoRuns (a few hours before I noticed the sound problem and in the middle of the 9-day process to remove malware) to disable malicious programs which were auto-loading, but I can't find anything that looks related to the sound that is not set to automatic loading at startup.

  I noticed in AutoRuns, that the aeaudio.sys driver is set to auto-charge but it says "File not found" in the Path column. I checked the system32 folder and it wasn't there at the beginning, but then I found the file in two other folders and copied in system32, yet AutoRuns still says it is not found. I tried to reboot to see if that would refresh but he says always not found. Also, I can't see how a problem with a driver (aeaudio.sys) that filters background noise (during the recording of the sounds, right?) can knock out all my audio.

  I have studied this problem for days and that you can find no answer to the problem. Help, please.

  Data sheet:
  Windows XP SP3
  Dell Dimension 4600
  Card isn't his SoundMAX Integrated Digital Audio

  msecox,

  Bad news: the problem is hardware, not software. I tried to install a new sound card, but it turned out that the part of my motherboard that sound control has been fried. Also, you may want to replace the sound card before condemning the audio controller. If this fails, your best bet is to replace all of your PCs, because a new motherboard will cost almost $200 (in addition to work if you can not install it yourself).

  Good luck!

• No active mixer available (audio driver)

  Hello

  After installation of windows xp with service pack 3, the sound system tray icon is gone and it displays a message (without active mixer available) when I try to drag and drop to control panel - sound and audio device.
  I checked the BIOS settings his on her.
  I took his service to automatically run when the system boots from services.msc.
  I also installed the codes and the latest version of the sound driver

  After having done all that, it does not work
  play only my sound system.

  Well, my motherboard is Intel D101GGC.

  So if there is someone who can help please do.

  Hello

  Look in Device Manager under the details of the pilot of the material in question to see if it is using the latest drivers you have installed. Usually, if not done carefully, Windows will install the hardware drivers that are certified to work on the platform. Sometimes, this can end by a material that was working before turning off. If it is active the pilot Microsoft, you can uninstall the hardware and restart your pc to install the one you downloaded last.

  Best,

• where can I download devices active mixer for XP

  Recently I reinstall Windows XP because I lost my hard drive and now I have no sound. In Device Manager, I have 3 yellow question mark points on PCI modem, video controller and multimedia audio control. If I go to the volume key it tells me I have no installed an actress mixer device? Help, please

  In Device Manager, you can right-click on these devices and choose put to update driver and let Windows search for a driver or you can go the manufacturer of your computer and search for drivers here.

• Did not push the file control point (no space available on the device)

  Hello

  I use Proliat HP DL 380 G5.  8 GB (RAM) 61 GB of space

  (RAID0 + 1) second HARD drive has failed while working on a HARD drive at the moment...

  After 20-25 minutes, I can't ping my VM OS which is Windows 7 (active)... and events, I see this error...
  Did not push the file checkpoint at 05:00 (no space available on the device).

  Details of the event:
  	Type: error Description: Error message on WINDOWS-PRTG on localhost.localdomain ha-Datacenter: impossible to reach 5.3 GB of file control point: no space is available on the device. Time: 09/12/2015-10:05:31
  Error stack:
  	Did not push the file checkpoint at 05:00 (no space available on the device). Failed to prepare the file ' / vmfs/volumes/56653def-ccd90fc3-0a42-001b783701ae/WINDOWS-PRTG/./WINDOWS-PRTG-f1e094f5.vmem ': 28 (no space available on the device). An error occurred during registration: 28 (no space available on the device). Impossible to suspend the virtual machine: msg.suspend.error.SUSPEND_E_NOSPACE.
  Additional event details:
  	Type ID: error Build host: 3029758 Target object Type: ComputeResource Type of data center: data center The host object type: HostSystem VirtualMachine object type: VirtualMachine ChainId: 201

  Could you help me solve this problem?

  Thanks in advance

  * Note * I found the solution... Before I used the system of virtualization and Citrix (XENSERVER) there was little different. That's why I'm stuck on a few easy steps... Well, the problem was that I use 61GB HDD, 5.5 GB of memory. When I create the VM I "ve used the maximum size of HARD drive and left no space for the SWAP file. I used 58 GB, and you have to assume + memory size, this means, 58 GB + 5.5 GB...   So who is right for which I didn't have enough space. Hopefully someone will find it useful. See you soon,.

• Could not power on VM: no space is available on the device: cannot power on the virtual machine.

  VMware esx ei, 3.5.0 123629

  Physical memory: 64 GB

  Hard drive: 1.63 TB

  7 virtual machines. 5 of them are configured with 4 GB memory and 2 of them with 2 GB of memory. I am able to power on 3 virtual machines with 4 GB of memory.

  When I try to turn on 4th VM with 2 GB of memory, I get this error message "could not power on VM: no space is available on the device: cannot power on VM.»

  I would like to know if this is the limitation of the ESX Server? How should I size the memory for VMS if I want to run every 7 virtual machines to the

  Moreover, given that I have 64 GB of physical memory. Is there documentation that provides a report of the maximum allowed memory configurable

  compared to the virtual memory?

  Thank you

  Ganesh.

  Ganesh,

  Memory reservations are defined based on VM by VM.

  You can allocate more memory to the virtual machines you have in your host (it's not really a good idea to go crazy with the overcommitment of memory, but some level of excessive pressure is used in general).  Memory applied to your VM resources are shares, bookings and VMkernel Swap limits.

  Just to illustrate:

  You allocate 8 GB memory to a virtual computer.  If you take all the parameters by default, ESX will allot a 8 GB VMkernel Swap file in the base directory of your VM (it will have the extension ".vswp") this VMkernel Swap file is a safety net.  Your virtual machine, at this stage, can consume up to 8 GB of memory If physics is available from the host.  If the memory of your host is overcommitted, some of the available memory 8 GB could be allocated on 8 GB VMkernel Swap file.

  If you set a reserve of memory - 2 GB - this means that the vmkernel will still award the first 2 GB of memory used by the virtual machine to the physical memory.  This is not means that the 2 GB of memory reserved is carved off the coast and completely dedicated to the virtual machine.  This means that the vmkernel offers up to 2 GB of RAM to the VM when and if she needs to use it.  It is a guarantee that the memory will be available upon request.  Because of this guarantee of the VMkernel, VMkernel swap file only has to make sure that the 6 GB memory is satisfied (4 GB total less the 2 GB reserved), so the VMkernel Swap file is only 6 GB in size.

  Actions are a mechanism for prioritization and limits are a cap on physical memory ever allocated to the VM.

  You can set up any number of memory for the virtual machines that you want - frankly, overcommitment of memory for ESX is a very good thing, but you must be vigilant about watching your systems if approve you.  If you have 64 GB of RAM, and you only configure your virtual machines to use total 32G, then you lose 32 GB of RAM.  If you allocate, say, 96 GB of RAM (total) to your virtual machines, then you look at a 50% overcommitment.  What to watch in overcommitting memory is application performance (and more importantly - perception of the user of this performance) and also the memory ballooning and VMkernel Swapping activity.  Those who can both will be in graphics performance in VirtualCenter.  I would recommend reading the Guide to management resources for more details.

  Hope that provides an overview.

  Thank you

  -jk

• I try to use my Time Capsule as external hard drive. But when I look in the Finder, nothing is available for shared devices.

  I have a Macbook air running OS X El Capitan. I try to use my Time Capsule as external hard drive. But when I look in the Finder, nothing is available for shared devices. I don't know if I need to restart the time Capsule or change the wireless setting, etc. ?

  Please advise...

  The TC appears in airport utility? If not then it is probably not part of your network or is lost... upgrade installed you El Capo because there a lot of questions.

  What is the TC plugged into the network by ethernet? And configured properly? Are you to internet via the TC... but can not see his drive... that would be typical?

  Have you set Finder preferences to display the network drives? Apple keeps making it difficult for some unknown reason.

  You actually have to mount the drive TC if it appears under shared... it still may not appear if you double click on it. Under the search box on the top of the right hand you see Connect (As) box, type the name or IP address of the TC in there... Make sure that you save the password from your keychain.

  I try to use my Time Capsule as external hard drive

  For the storage of the files it is fine.

  For the execution of direct files for an application in the Mac, you are very likely to damage or corrupt the file at some point.

  And how do you do backups? Time Machine can't help you... it won't work.

  Backup is crucial, especially if you do things apple say not to do... That is to say move your photos or the iphoto library to the TC and try to use direct from there... expect any day to need a resumption of the library.