There is no communication between devices that are connected to the Linksys WAP4410N Wireless access point?

Hi all

I have deployed the new Linksys WAP4410N Wireless Access Point and it works fine. Laptop which is connected to the AP may be able to access the internet. It can communicate with AP and also the gateway IP (IP Router) but it is wireless devices are not able to communicate with each other. In the case of peripheral LAN can communicate with wireless devices. Cannot able to share files between wireless devices.

Please help me solve this problem. Wat could be the problem here. Stage of Wat I have to take to eliminate this problem.

Advance thanks.

Thank you and best regards,

Chandhuru.M

Hi, my name is Eric Moyers. I am a network Support Engineer in the Cisco Small Business Support Center. Please use the Forums to Post community of Cisco.

The title of security without thread/how do you have isolation set up wireless?

Insulation wireless (SSID) on the inside must be disabled to allow the computers associated with the same SSID to see and transfer files between them wireless

Thank you

Eric Moyers. : | :. : | :.

Cisco Small Business U.S. STAC Advanced Support Engineer

CCNA, CCNA-wireless

866-606-1866.

Mon - Fri 09:00 - 18:00 (UTC - 05:00)

* Please rate the Post so other will know when an answer has been found.

Tags: Cisco Support

Similar Questions

  • I want to see all the devices that are connected to my router

    I have a router E1200 and it is very good, however I have noticed that there are 12 devices connected to my router so infact it should be only 4 devices. I would like to see all the devices that are connected and disconnect those who do not belong to HELP!

    You use software to see all the devices that are supposed to be connected to your router? You can reset and start over with your router.  Make sure you have security enabled on it as WPA Personal. You can try a DHCP reservation so to ensure that devices that will have access to your router are those you have included on the list.

  • Public Static T3600 noise coming from headphones that are connected to the headset before decision-making.

    I have problem with my T3600 when used before headphone jack. Noise coming from headphones that are connected to the telephone jack of heat before, however, I tried to connect with rear headphone jack is good. If I put the system in standby mode, when I restart the audio does not work, but the noise electric only in my helmet!

    Hoping to see an improvement soon.

    Hello

    I did the steps you recommended, but my computer is still such a situation.
    I'm using BIOS version A14, audio Realtek ALC269 and Driver for High Definition Audio Driver Version 6.0.1.5890, A06.
    Drivers for Service NOTE from the ADMINtag: maintain the label removed by privacy policy >
    Please help me. Thank you

  • Devices that are compatible with the Tablet HP Jet 7 Signature Edition

    With HP Jet 7, what Bluetooth wireless keyboard and optical mouse will work with it?

    Also, I buy a wireless printer to use as well - I have to be aware of?

    I'm starting a blog with limited capital. Thank you to everyone who contributes to the cybercomputability of us all.

    Hello and welcome to the HP support community!

    Ask us the question, "what should I buy?" is difficult to answer.  We do not know your needs or preferences (others you have "limited Fund").  There are hundreds of printers with wireless capabilities.  Still, we don't know what you're wanting - ink jet, laser, color, photo printing capacity jet, absolute who is cheapest available?  Print you hundreds of documents per month, or two or three?

    You ask strictly for HP products which are compatible with the Tablet?  All/all products from other manufacturers?

    If you are expected to produce a list of all the possible volumes that work, it won't happen...

    In theory, any BlueTooth keyboard or mouse designed to work with a Windows PC should work.  HP made several.

    Most wireless printers use a wifi network.  It will help if you have one at home - an HP ePrint printer can print a file from anywhere in the world if connect you to a network home.  No network?  There are other printers that can print directly using wifi.

    Think about your needs first, and then balance the costs involved.   It would be useful you ask on the printers in the printer of the Forum sections.

    WyreNut

  • How to go from "offline" Mode when you use Firefox on an android device that is connected to the internet through Bluetooth.

    I have been using my tf300. Whenever I try to open Firefox on the Tablet while using a Bluetooth connection, the only screen that Firefox opens is a generic screen displaying 'Offline Mode '. Is there a way to switch to online mode or I am able to use the browser on a wireless signal?

    Could you clarify - are other applications can connect to the internet when you are logged in this mode?

  • Whenever I try to open my hotmail calendar this message: there is a problem connecting to Hotmail calendar now. Please make sure that you are connected to the Internet and try again.

    Hotmail calendar error

    Whenever I try to open my hotmail calendar this message appears

    connection error
    There is a problem connecting to Hotmail calendar now. Please make sure that you are connected to the Internet and try again.
    For sure, I understand what his average, but it's weird because when I open it, I'll be online.

    Thank you for visiting the Microsoft Answers site.

     
    The question you have posted is related to Windows Live Hotmail and would be better suited to the Windows Live community. Please visit the link below to find a community that will support what ask you:
     
    http://windowslivehelp.com/product.aspx?ProductID=1
  • What are devices that are registered for my push app service?

    Is there an api to find out which are the devices that are currently enrolled in my push service?

    Sometimes I have trouble getting the push to deliver to some of the features... and it doesn't seem to be compatible - I want to check that the devices are currently saved when I try to send a message to them.

    I usually get that status pending a response - and they doesn't seem to receive any push notification...

    any help will be appreciated.

    Thank you.

    https://pushapi.eval.blackberry.com/mss/PD_cpSubQuery
    
    
    http://www.openmobilealliance.org/tech/DTD/pap_2.1.dtd">
    
        
            
        
    
    
  • All my iTunes music is on a disk hard Ext. connected to my home network through a router. Is it possible that devices that are part of my home network share iTunes can access the music on this disc hard Ext. without my laptop being on?

    All my iTunes music is on a disk hard Ext. connected to my home network through a router. Is it possible that devices that are part of my home network share iTunes can access the music on this disc hard Ext. without my laptop being on?

    Additional information: the laptop is what I used to install all the music, via iTunes, which is located on the external hard drive connected through home network router.

    Is it possible that devices that are part of my home network share iTunes can access the music on this disc hard Ext. without my laptop being on?

    Laughing out loud

  • List of blackBerry Smartphones of all devices that are without trackball or wheel

    Hello world

    Our company develops an application for BlackBerry devices. Someone could give me a list of all devices that are without trackball or wheel?

    Thanks in advance

    AN_employee wrote:

    Could someone give me a list of all devices that are without trackball or wheel?

    Which leaves all devices including the touchpad and touch screen.

    Touchpad:

    85xx

    97xx

    Touch screen:

    95XX

    Is this what you need?

  • -L' stop six options that are next to the lock button in the task in the task bar disappear from my computer.

    -The six closure options that are next to the lock button in the taskbar disappear from the my computer. When I click on the arrow next to the lock button, my only computer log screen and lock up instead of six normally closed options i.e (change user, locking, lock, re - start, suspend and logoff.)
    -The first step, I took is to check for assistance and support in my system, and I could not find a guide on how to restore six back closure options.
    -There is not any notification of any errors.
    -My product/name of Microsoft's Windows vista Home Basic edition. Model: Compaq presario CQ60 Notebook PC
    All I want is no details to restore my missing shutdown options. Or if you can restore it for me online.

    Hello

    • What were the changes made before the problem occurred?

    You can view these methods:

    Method 1:

    I suggest you to start your computer in safe mode with network and check.

    http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode

    Method 2:

    Try the SFC scan on the computer in mode noraml.

    SFC/scannow is a very useful command that you can use in any version of Windows. When the SFC (System File Checker) command is used with the/scannow switch, the tool analyzes all the important files of Windows on your computer and replace if necessary.

    Missing and the corruption of the operating system (like many DLLs) files are probably the main cause of the major problems of Windows. In view of this, plus the fact that the SFC/scannow is completely automatic and very easy to use, the tool should be usually one of your top not troubleshooting.

    Reference:

    How to use the System File Checker tool to fix the system files missing or corrupted on Windows Vista or Windows 7
    http://support.Microsoft.com/kb/929833

    Method 3:

    Run a full scan with your antivirus software and removal of malware/spyware.

    http://www.Microsoft.com/security/PC-security/MSE.aspx

    Malware:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-security/how-to-get-rid-of-malware/ba80504b-61f1-4D71-960f-b561798b7b42

    Method 4:

    You could also try to perform a system restore.

    http://Windows.Microsoft.com/en-us/Windows-Vista/what-is-system-restore

  • View the programs that are running on the remote computer.

    How use remote desktop to view the programs that are running on the remote computer. I connect to the pc remotely is used to monitor a communication system for the alarms. The alarm Viewer application runs as a service. When I connect locally to the computer, I can see the application and view the status of the alarm system. When I connect via remote desktop, I can't. I don't see that the application is running in the services list.

    Do you mean the Task Manager?

    If so, try using change sequence to bring up the Task Manager while in the session remote desktop active...

    http://Windows.Microsoft.com/en-us/Windows7/keyboard-shortcuts

    You might also find something in the PsTools collection...

    http://TechNet.Microsoft.com/en-us/Sysinternals/bb896649

  • How to find computers that are not on the domain in an Active Directory forest.

    Hello

    I'm looking for a tool that can scan a subnet and give me the list of computers that are not on the field, but connected to the network. My company has recently spent a lot of users of the task force to the area, but there is a population of users who are unwilling to join the domain and still using the local administrator to log on to the computer.

    These computers do not meet the domain policies applied and causing many problems with the network and other systems on the field.

    Help, please.

    concerning

    Syed M. Uzair

    This issue is beyond the scope of this site and must be placed on Technet or MSDN

    http://social.msdn.Microsoft.com/forums/en-us/home

  • How to make the color of ScrollBar that are created using the css code is displayed in Windows 8

    I wish I could understand how to get the color of ScrollBar that are created using the css code appears on my web design theme games. But I can't see them in Windows 8. Is there something that I need to enable to see colorful scroll bars? I'm used to be able to see them on my Windows XP computer. It is important for me because a lot of people like models with colorful scroll bars.

    Open the Tools menu and turn on "Compatibility view" to do.  Note that this works only in the desktop version of Microsoft Internet Explorer.

  • I added a 128 gB microSD card to provide the space for my photos, (a second hard drive) but lightroom won't let me not import all the pictures that are already on the map. The only import option is 'copy', not 'Add '.

    I had a problem with Lightroom on Microsoft Surface 3.  I added a 128 gB microSD card to provide the space for my photos, (a second hard drive) but lightroom won't let me not import all the pictures that are already on the map.  The only import option is 'copy', not 'Add '.  I worked around this by mounting a network directory containing photos and imported from there.  Is it possible to stop Lightroom to see such a map as a camera?

    I have not tested, but it should work with Lightroom:

    http://stltechtalk.com/ultimate-Ms-surface-hack-fully-utilize-micro-SD-card/#.

    Not sure what happens if you remove the card and put in a similar SD card. I would like to test it so that you know what to expect.

  • Does anyone know how to integrate a widget that displays quotes from stock market of listed companies that are mentioned in the web page?

    I'm developing a financial information site. I am interested in incorporating the latest prices of the companies that are listed on the stock exchange that also appear in an article... For example, if Tesco, Morrison and AstraZeneca are mentioned in a news article I write and publish, I would like a code/widget that displays the stock of these companies somewhere in the Web page.

    Thank you very much.

    If you use your search engine preferred to search 'widget scholarship', you will come to the top with a large number of results. If you develop a financial information site, however, you need to be very careful which widget you choose. I just looked at the terms of a free widget that comes up in the search results. It says "x.com may include links to third-party websites. Some of these sites may contain materials that are inaccurate, unlawful or objectionable. You agree that x.com will not be responsible for commercial activities or other activities that occur on a Web site, you access through links on x.com. "Choose the incorrect data source could destroy the reputation of your site. It would be preferable to opt for a paid service. However, even paid for the services do not necessarily provide a stock in real time.

    There is no Dreamweaver widget for the stock. Simply to assess third-party provider options yourself.

Maybe you are looking for

  • disable the synchronization of office & documents in iCloud

    How to stop documents & synchronization in iCloud desktop, I accidentally turned it on macOS now I can't go back, things can't be pasted into the folder to iCloud. Help, please

  • Can I upgrade to iOS 10 using a Mac with OS (10.8.5) Mountain Lion?

    Can someone tell me if I can sync to my iPhone 6 with iTunes using a Mac with the (10.8.5) Mountain Lion?

  • you tube does not work

    his field of sayes loading... on the upper right corner and in the middle of you tube it sayes. An error has occurred. Please try again later.

  • External output video - Satellite Pro L20

    My L20 recently stopped video output (DVD, programs) to an external projector. Images, etc. are fine, but no program within it - just an empty space. Another output of the screen is not affected. Everything used to work properly. I am not aware of ha

  • graphics update in real time

    Hello In the attached VI in labview 8.5, I wanted to show two plots on the same graph in real time.  In other words, for each iteration in the 'loop', updates to the graph.  I am not able to do this with one of the plots (y1) but holds two data sets