There is no Windows 7 driver for my HP printer

Similar Questions

• Windows 8 driver for LaserJet P1005 printer?

  Does anyone know when driver Windows 8 will be available for the LaserJet P1005 printer?  Says support page 'end 2012' - but here we are in 2013 and no driver.  Hoping that HP Experts may provide information, or a temporary workaround.

  Try to remove the software from your computer by following this video-

  http://youtu.be/-M0GVVcwT-o

  A time out, try to reinstall the software and try to print again.

• Windows 7 driver for video Capture/TV Tunner card

  Is there a Windows 7 driver for the video capture card TV Tuner HP P/N 5188-7344?

  Hello Thirdsmith, I read on another Forum that the Member had the same card that was in his system, the same model as your number and it installed in another system with Windows 7 x 64, went on the Windows Update site and the device was found and drivers downloaded and installed for the Asus NT SC/ATSC TV card.

  I can't check this, since I have no personal experience with this TV card.

  Just some thoughts.

• Cannot install Vista service pack 2 is 800f0a09 error code with the message that there are problems with the driver for dell latitude

  Original title: why I get error code 800f0a09 to upgrade to windows vista service pack 2

  I have a laptop del that is running on Windows Vista Edition Home Premium. I tried to download itunes but it requires service pack 2. Whenever I try to update to service pack 2, I get the message following error code 800F0A09. He also mentioned problems with the driver for dell latitude. What can I do to fix this please.

  Thank you

  Hello

  Please join Microsoft Community where you can find the necessary information on Microsoft products!

  You can not install Vista Service pack 2 and get the error with code 800f0a09 and the message that there are problems with the driver for dell latitude.

  The problem may occur if some of the components of the update are corrupt.

  What is the full error message that you receive?

  I suggest you follow the steps mentioned below to check if the problem is with the update components:

  Method 1: Reset the update components

  See the site:

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058

  Warning: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

  Method 2: Run the system update readiness tool

   

  See the site:

  System update scan tool corrects errors of Windows Update in Windows 8, Windows 7, Windows Vista, Windows Server 2008 R2 and Windows Server 2008

  http://support.Microsoft.com/kb/947821

  Method 3: Turn off the antivirus software

   

  See the site:

  Disable the anti-virus software

  http://Windows.Microsoft.com/en-in/Windows-Vista/disable-antivirus-software

  Important note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you need to disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network, while your antivirus software is disabled, your computer is vulnerable to attacks.

  I hope this helps. If the problem persists, let know us and we would be happy to help you.

• Windows 7 driver for Canon BJC 210 inkjet printer

  I need a Windows 7 driver for my Canon Bubble Jet BJC - 210 printer.

  Does anyone know how to get a printer driver for my old inkjet Canon BJC-210 printer.  When I bought in the late 1990s a driver disc wassupplied with a driver for Windows 3.1, and he continued working when I upgraded to a laptop running Windows XP.

  Now have a new laptop with Windows 7 loaded and Microsoft no longer supports the driver.
  Does anyone have an idea.  The printer is a nice, small, just to feel and I was always happy with it and I have lots of spare ink.
  It would be a shame to have to throw away sust in the interest of a printer driver.

  1990? If the drive was origonally to the win3 its will not work under win7. The printer is not compatible with win7.

  If you have win7 Pro or Ultimate installed there are some options, which can be complicated to impliment.

• Help, please... I need Windows XP driver for my CQ40-121TU

  Help, please... I need Windows XP driver for my CQ40-121TU

  Please send me a full links to the driver for CQ40-121TU thank you very much...

  Your computer came with XP? If your computer came with VISTA and was never made for XP, so no XP drivers will be available for the system. I looked at the HP site and could not find XP drivers, which probably means that it is a model of Vista, not XP. If it came with XP then call HP and they will be able to send you a XP disc for a small fee, like $15 or more.

• When Windows 8 driver for laptop Satellite C660D - 1 H 2 be available?

  When Windows 8 driver for laptop C660D - 1 H 2 be available?

  Probably when Microsoft offers on the market and when Toshiba start offering equipped laptops of preinstalled Win8.

• Where to download Windows 7 driver for HP HDX18-1378?

  Hello

  I have clashed with a broken link when I look for driver HP HDX18-1378.

  Where to download Windows 7 driver for HP HDX18-1378?

  Thank you

  Hello

  Try to paste the following link in your browser

  http://h10025.www1.HP.com/ewfrf/wc/softwareCategory?OS=4063&LC=en&cc=us&DLC=en&sw_lang=&product=3979268

  or by clicking this link.

  Erico-

• Windows 7 driver for printer c4340 insists on loading in Spanish

  I'm English, living in Spain.  I just bought a laptop Samsung 7 times in the Portugal.  Windows 7 has been installed with UK location + English language, the region is set to the United Kingdom, the language to English and the default location in the UK

  I downloaded the Windows 7 driver for my printer HP C4340 on the HP UK site.  I chose the English driver (PS_AIO_03_Nonnet_Full_Win_WW_130_140.exe).  However, when installing the driver always INSISTS on the default of Spanish language - it gives me some options.  I can't find the settings on the computer or in Windows 7 that relate to the Spanish at all!  I even tried disconnected from the internet (where he picked up a location of my ISP).

  Any ideas? -J' ran!

  Hello

  Don't forget to change the language of Non-Unicode, so defining, then check any changes:

  In the Control Panel, go to the region and language.

  Enter in the administration tab.

  Click settings to change system locale and change its value to English.

  Restart the PC and check any change.

  Kind regards

  Shlomi

• Could not find a Windows 8 driver for my Epson 4990 flatbed scanner

  I am running Windows 7 because I couldn't find a Windows 8 driver for my Epson 4990 flatbed scanner that is connected via the USB port.  How I install a Windows 10 driver for this USB scanner which will continue to support all the features that I've come to depend on?

  Original title: Windows 10 drivers

  You can install the driver win 7 in compatibility in both 8 and 10 to win victory mode and it should work

  To install in compatibility mode do the following:

  Click with the right button on the installer > properties > compatibility > choose OS

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows?SignedIn=1

  () works under vista, win 7, 8 to win and win 10)

• Need a (free) compatible with Windows 7 driver for Lexmark Z13

  Need a (free) compatible with Windows 7 driver for Lexmark Z13

  Hi nikua,

  According to the Windows 7 Compatibility Center https://www.microsoft.com/windows/compatibility/windows-7/en-us/Details.aspx?type=Hardware&p=Lexmark%20Z13%20Inkjet%20Printer&v=Lexmark&uid=16000&pf=3&pi=0&c=Printers%20%26%20Scanners&sc=Ink-Jet%20Printers&os=32-bit the Lexmark Z13 is 'compatible' with Windows 7 therefore the default drivers should be sufficient.

  Of course this model is no longer available for Lexmark won't provide drivers for Windows 7. If you can't get your printer to work then maybe it's time to think about buying a new. John Barnett MVP: Windows XP Expert associated with: Windows Desktop Experience: Web: http://www.winuser.co.uk ; Web: http://xphelpandsupport.mvps.org ; Web: http://vistasupport.mvps.org ;

• How can I get Windows 7 driver for Brother MFC-9800?

  Windows 7 has stopped recognizing my Brother MFC-9800 as a scanner. How to get Windows 7 driver for Brother MFC-9800?

  Have you tried brother?

  http://welcome.solutions.brother.com/BSC/public/us/us_ot/en/DLF/download_top.html?reg=us&c=us_ot&lang=en&prod=mfc9800_us

• where can I get the printer driver for canon lbp2900 printer. I'm running Windows 7 on a HP Pavilion PC

  where can I get the printer driver for canon lbp2900 printer.  I'm running Windows 7 on a HP Pavilion PC.  Windows Update does not list a driver for LBP2900 printr

  A quick google found this - http://software.canon-europe.com/products/0010177.asp perhaps?

  I have not tried, I don't have the printer.

  Its usually best to ask the manufacturer of the device for its pilots in the first instance.

• Anyone know where I can find a signed, 64 bit, windows 7 driver for a LaserJet 3380?

  Anyone know where I can find a signed, 64 bit, windows 7 driver for a LaserJet 3380?

  Windows 7 already has a driver for your printer. Follow the instructions on this document from HP web to install it.

  Best regards
  ERICO

• 8.1 Win driver for my MX870 printer

  Just got a new Dell with Windows 8.1. When I plugged my MX870, Windows has installed a driver. The driver for printing looks similar to the original driver Canon I had 2-3 years and installed on my old Dell with Vista.

  But I do not see a Canon driver for scanning with the MX870. I don't see the applet Windows Fax and Scanner lame, but which is really lame.

  I see that the web page of Canon has a Windows 8 driver for the printer. So, always cautious about installing anything - I guess I should uninstall the installed driver Windows 8.1, then install the driver on the website of Canon?

  If so, should I install the driver with the printer NOT connected to the computer?

  Thank you

  Joe

  JoeZ salvation,

  You don't have to uninstall the drivers that were already installed by Windows; You can simply download and install the latest drivers for your printer from Canon USA site.  Please click here to access the drivers and software page for the PIXMA MX870.  Once the initial download to your model page, follow these steps:

  1. check that the operating system detected in the "OPERATING SYSTEM" drop is correct and if this isn't the case, please click on the drop down menu to select your operating system.

  2. then, click the red arrow next to the "RECOMMENDED FOR YOU" section and click on the drivers of MP file. When you do, a red DOWNLOAD button will appear. Please click the box below the button DOWNLOAD, and then click DOWNLOAD to start the download. The time for the download process can vary depending on the speed of your Internet connection and the size of the file being downloaded.

  Once you have downloaded the MP drivers file, please follow the steps above to download also the rest of the printer software, except in step 2, you can click the red arrow next to the word SOFTWARE to view and download the software.

  I hope this helps!

  It has not responded to your question or problem? Please call or write to us at one of the methods on the page contact us for further assistance.