There our active SRST router feacture?

Hello guys,.

We have a 2951 router, I know that there are four King of this router configurations:

1 - CME

2 - bridge

3 - SRST

4 - No (I guess than a normal router)

cheking out inside the show license, I couldn t find out where is this feacture, we have to convert this router to be a SRST system? What commands would be useful to know if it is activated this feacture? What commands will be useful to prove this SRST license is activated?

It's my router:

Router #show license

1 function of the index: ipbasek9

Time left: life

License type: Permanent

The license status: Active, in use

Number of licenses: not counted

License priority: medium

Function index 2: securityk9

Time left: not enabled

Period of opportunity: 0 minute 0 second

License type: EvalRightToUse

The license status: don't use, not accept EULA

Number of licenses: not counted

Priority of license: no

Index 3 function: uck9

Time left: life

License type: Permanent

The license status: Active, in use

Number of licenses: not counted

License priority: medium

Index 4 function: datak9

Time left: not enabled

Period of opportunity: 0 minute 0 second

License type: EvalRightToUse

The license status: don't use, not accept EULA

Number of licenses: not counted

Priority of license: no

Index 5 function: doorman

Time left: not enabled

Period of opportunity: 0 minute 0 second

License type: EvalRightToUse

The license status: don't use, not accept EULA

Number of licenses: not counted

Priority of license: no

Index 6 function: LI

Index 7 function: SSL_VPN

Time left: not enabled

Period of opportunity: 0 minute 0 second

License type: EvalRightToUse

The license status: don't use, not accept EULA

Number of licenses: 0/0 (in-use/Violation)

Priority of license: no

Index 8 function: ios-ips-update

Time left: not enabled

Period of opportunity: 0 minute 0 second

License type: EvalRightToUse

The license status: don't use, not accept EULA

Number of licenses: not counted

Priority of license: no

Function index 9: SNASw

Time left: not enabled

Period of opportunity: 0 minute 0 second

License type: EvalRightToUse

The license status: don't use, not accept EULA

Number of licenses: not counted

Priority of license: no

10 new feature: hseck9

Index 11 function: cme-srst

Time left: not enabled

Period of opportunity: 0 minute 0 second

License type: EvalRightToUse

The license status: don't use, not accept EULA

Number of licenses: 0/0 (in-use/Violation)

Priority of license: no

Index 12 function: WAAS_Express

Time left: not enabled

Period of opportunity: 0 minute 0 second

License type: EvalRightToUse

The license status: don't use, not accept EULA

Number of licenses: not counted

Priority of license: no

Index 13 function: UCVideo

Time left: not enabled

Period of opportunity: 0 minute 0 second

License type: EvalRightToUse

The license status: don't use, not accept EULA

Number of licenses: not counted

Priority of license: no

Hello

SRST license is available, and once you try to configure SRST by launching the emergency call manager, you will be asked to accept the EULA, which activates the feature.

Here's a similar post on SRST license

https://supportforums.Cisco.com/thread/2075698

and here's an interesting document

Activation of the built-in software on Cisco routers and Cisco Integrated Services router G2

http://www.Cisco.com/en/us/docs/routers/access/sw_activation/SA_on_ISR.html

HTH,

Aashish

Tags: Cisco Support

Similar Questions

  • Issue of activity of router

    -JDeveloper 12.1.2

    -new workflows

    Situation within the bounded task flow is shown on this photo

    studyBrowse is a .jsff page fragment file that has table with selectable lines. There is also a button on the page when you click the following code is triggered in the bean to support:

    public String b1_action() {}

    Links DCBindingContainer = (DCBindingContainer) BindingContext.getCurrent () .getCurrentBindingsEntry ();

    DCIteratorBinding dcItteratorBindings = bindings.findIteratorBinding("StudyStaffIterator");

    ViewObject voTableData = dcItteratorBindings.getViewObject ();

    Line rowSelected = voTableData.getCurrentRow ();

    System.out.println (rowSelected.GetAttribute ("StudyId"));

    Return rowSelected.getAttribute("StudyId").toString ();

    }

    According to which line is selected, I'll pick up the chain. The string value, the control should be user to a specific page. For this, I use router activity called pickupStudy.

    < router id = "pickupStudy" >

    < case id = "__10" >

    < expression > #{backingBeanScope.Studybrowse.b1_action eq 'P2'} < / expression >

    < result > mfrp2 < / results >

    < / Body >

    < default - > mfrp2 < / default >

    < / router >

    In the above example, if the string returned in a table is "P2", I want to take the case of control flow "mfrp2".

    Moreover, in my application, it cannot be default result for this activity of the router. Any string returned by the table will have his own case of control flow; Worst case, if for some reason, I get unknown string then I should stay on the page studyBrowse and maybe the message at the top of the page that is to say as an error

    Now, when I tested the above, I get:

    < 2 January 2014 8:17:38 AM CST > < error > < oracle.adfinternal.controller.application.AdfcExceptionHandler > < ADFC-50016 > < ADFc: when Manager application exception exception handling threw a new exception.

    oracle.adf.controller.activity.ActivityLogicException: ADFC-02013: ADF controller cannot find metadata for activity ' / WEB-INF/prepare-study.xml#prepare-study@pickupStudy'.

    at oracle.adfinternal.controller.util.Utils.createAndLogActivityLogicException(Utils.java:232)

    at oracle.adfinternal.controller.engine.ControlFlowEngine.doRouting(ControlFlowEngine.java:1105)

    at oracle.adfinternal.controller.engine.ControlFlowEngine.doRouting(ControlFlowEngine.java:950)

    at oracle.adfinternal.controller.engine.ControlFlowEngine.routeFromActivity(ControlFlowEngine.java:551)

    at oracle.adfinternal.controller.engine.ControlFlowEngine.performControlFlow(ControlFlowEngine.java:160)

    at oracle.adfinternal.controller.application.NavigationHandlerImpl.handleAdfcNavigation(NavigationHandlerImpl.java:115)

    at oracle.adfinternal.controller.application.NavigationHandlerImpl.handleNavigation(NavigationHandlerImpl.java:84)

    at org.apache.myfaces.trinidadinternal.application.NavigationHandlerImpl.handleNavigation(NavigationHandlerImpl.java:50)

    at com.sun.faces.application.ActionListenerImpl.processAction(ActionListenerImpl.java:130)

    at org.apache.myfaces.trinidad.component.UIXCommand.broadcast(UIXCommand.java:190)

    to oracle.adf.view.rich.component.fragment.ContextSwitchingComponent$ 1.run(ContextSwitchingComponent.java:130)

    at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent._processPhase(ContextSwitchingComponent.java:461)

    at oracle.adf.view.rich.component.fragment.ContextSwitchingComponent.broadcast(ContextSwitchingComponent.java:134)

    No idea what I am doing wrong?

    Timo actually I reach the method, the problem seems to be related to the logic of router result and method.

    I'm reading Frank http://www.oracle.com/technetwork/developer-tools/adf/learnmore/45-decision-based-method-outcome-169187.pdf white paper

    and my bean support method to modify as follows:

    public String b1_action() {}

    Links DCBindingContainer = (DCBindingContainer) BindingContext.getCurrent () .getCurrentBindingsEntry ();

    DCIteratorBinding dcItteratorBindings = bindings.findIteratorBinding("StudyStaffIterator");

    Line rowSelected = dcItteratorBindings.getCurrentRow ();

    System.out.println (rowSelected.GetAttribute ("StudyId"));

    RequestContext.getCurrentInstance () .getPageFlowScope () .put ("chosenStudy", rowSelected.getAttribute ("StudyId"));

    Returns a null value.

    }

    What seems to be missing in the book of Frank's 'estimatedRowCount' variable or in my case "chosenStudy". Somehow, he must exist under pageFlowScope design-time. How to add?

    As you can see in this photo, I'm unable to write EL for the router because it can be found under the pageFlowScope

    http://Tinypic.com/r/2mr9ocy/5

  • Online VLSC does not allow Me to create A Ticket Support to our active SA agreement

    Dear Sir/Madam,

    I understand that it was entitled to some questions of Technical Support in our advance purchase of our current agreement of ITS active, however

    as I try to do it on your VLSC site then I can't continue by creating this support request.

    Please clarify how can I now proceed to set up a Technical Support ticket regarding my question on Server 2008 R2 SP1 and AD/Login Script?

    Best regards

    Craig Cook

    Hi Craig,.

    We have a dedicated forum support team who assists the issues related to Windows Server 2008 R2. You can ask your question here:

    https://social.technet.Microsoft.com/forums/WindowsServer/en-us/home

    In addition, this site will give you options to communicate directly with the assisted support team.

    https://TechNet.Microsoft.com/en-us/WindowsServer/bb512923.aspx

  • Suspicious activity of router, pirate bank account. Can you help me?

    My bank account hacked, and apparently it happened yesterday. It is that there are several purchases using steam (a PC game platform), and that my credit card has been used and so assume that my credit card information has been stolen, or that someone has had on my bank account. So I checked my router (ASUS RT-AC87U) and found this in the logs:

    4 September 11:59:59 ntp: start NTP update
    4 September 12:01:01 HTTP connection: detect abnormal connections to 5 times. The most recent was 207.172.85.203.
    4 September 12:01:02 HTTP connection: detect abnormal connections to 10 times. The most recent was 207.172.85.203.
    4 September 12:01:02 HTTP connection: detect abnormal connections to 15 times. The most recent was 207.172.85.203.
    4 September 12:01:03 HTTP connection: detect abnormal connections to 20 times. The most recent was 207.172.85.203.
    4 September 12:01:03 HTTP connection: detect abnormal connections to 25 times. The most recent was 207.172.85.203.
    4 September 12:01:04 HTTP connection: detect abnormal connections to 30 times. The most recent was 207.172.85.203.
    4 September 12:01:04 HTTP connection: detect abnormal connections to 35 times. The most recent was 207.172.85.203.
    4 September 12:01:05 HTTP connection: detect abnormal connections to 40 times. The most recent was 207.172.85.203.
    4 September 12:01:05 HTTP connection: detect abnormal connections to 45 times. The most recent was 207.172.85.203.
    4 September 12:01:06 HTTP connection: detect abnormal connections to 50 times. The most recent was 207.172.85.203.

    And this message is repeated again and again so far:

    4 September 12:05:55 HTTP connection: detect abnormal connections to 2845 times. The most recent was 207.172.85.203.
    4 September 12:05:55 HTTP connection: detect abnormal connections to 2850 times. The most recent was 207.172.85.203.
    Aug 4 12:35:37 miniupnpd [17490]: port mapping expired deleted NAT - PMP 57477 UDP protocol
    Aug 4 12:35:37 miniupnpd [17490]: port mapping expired deleted NAT - PMP 57477 TCP protocol
    4 September 13:00:01 ntp: start NTP update

    Newspapers, then continue with orders more as the
    Message "Expiry port" and some updated more. Can someone tell me exactly what happened and what I need to do from this moment?

    Thank you!

    Side note: I myself have a Steam account, but my computer with connected Steam account since was not at the point where the transaction of steam that went, and my newspapers receiving account Steam have no record of purchases happening in the last week.

    I think that someone is suggesting this thread to another sub-forum for viruses and spyware &.   I don't know that it's the kind of 'analysis' ever made here.

    Unless someone else wants to comment, all I can do is offer you some common sense advice: If you haven't already done so, contact your Bank and credit card company to warn about potential fraud.   You can also contact the major credit bureaus, Experian, Equifax and TransUnion.

  • Install a new domain on a VM server controller in our Active Directory

    Hello world

    Thank you for your help in advance.

    I would like to put a (with Windows 2003) domain controller in a Windows 2008 box and add the domain controller for the existing Active Directory network. My manager approves it and it will be my advised to work more VMWare work officially.

    Here are some questions that I have and hope you can help answer:

    1.) there will be problems to run a domain controller in a virtual machine environment?

    2.) on the RODC (VM), I can install all services such as DHCP, DNS, WINS? And they will work only with no problem?

    3.) on Windows 2008 Server, which I will install VM Server, that server must be a domain member server?

    (4.) what the backup on the new domain controller? Can I just save the virtual machine files in the folder of BackupExec? Or free tools, I can try?

    5.) I don't think the org will put money on the implementation of a san or vmware structures... According to what I have, have you any tips on this project? Is it a good idea to run the domain controller in the VM environment?

    I thank very you much for your help once again!

    Takusan

    Thank you very much for your info! # 1, you mentioned there are a few things must be aware, can I ask that those who are?

    A few I can think of are:

    (1) supported by Microsoft - backup methods if you want MS support for a problem with the AD, make sure that you use the supported backup methods.

    (2) the time sync - more important still, how you intend to do.  VMware Tools or native Windows utilities.  Discover 1318 KB for more information.

    (3) the safety of encapsulated all the vm files - that is why I recommended given the host on the domain.  It would be more likely to pick up updates of patches, GPO, AV, etc. like this.  Your virtual DC is now portable, and this represents a new security challenge.

    (4) how to avoid snapshots on DCs - what can cause a USN restorations, unsupported directories and General nastiness that should be avoided.

    (5) avoiding the DCs P2V conversions - what is generally not recommended. Their new construction.

    (6) given the requirements of performance - make sure that your host can follow or actually providing the resources to the virtual machine.  You do not want your DC is slow for some reason any.

    There are probably others I'm here leaving as well.  This is why I think that domain controllers does not necessarily make the best pieces for virtualization.  If you take a print server, you will see most of the above concerns disappear.  It can be done with the DC first, but it'll just be a steep learning curve.

  • Is there a way to route with maps of Apple?

    I need to plan a multi leg travel. I can do in Apple Maps?  If this isn't the case, someone has a suggestion for a site or app that does this that has a 75% or higher customer reviews?

    The Maps stock iOS app does not route multiple destinations.  I have this one (4 + stars, $4) and it's multi-city routing, although I have had to use it once for that.  Other high rated applications are Route4Me and Planner route Road Warrior, although I've never used.

  • Photosmart B109n-z - the definition of a static IP address on the printer on an active DHCP router

    Hello world

    I hope someone can help me with a problem I have with this new printer.

    I installed this printer on my network, via my Belkin N wireless router.

    I have 5 PC on my network, 1 PC is wired, the other 4 are all connected wireless and use DHCP to assign IP addresses. I installed the software on every PC following the instructions on CD and the INVESTIGATION period has been set at the time where the method, the first of the USB cable and allocated 192.168.2.8

    All PC could see the printer and can print directly to it.

    The problem I have is that once I turned off the printer to move it to a more accessible place at home for all to use on powered upwards, it was allocated a different IP address by DHCP and now no one can no longer see the printer.

    I printed a network printer configuration page and the IP address has changed to 192.168.2.12.

    I know not if I disconnect again or suffer an output power, then it will constantly change IP of the DHCP assignment. All my IP leases are forever, but I can't help the outs of the downs of the power supply and cannot keep having the printer disappear all the time.

    My router has currently the following IP ranges

    192.168.2.1 router

    192.168.2.2 PC - Hard wired PC server

    192.168.2.3 thru 99 - pool beach of IP DHCP that covers my WIFI PC 4

    192.168.2.100 thru 249 - available for static allocation

    How can I set one of my static to the printer IP address, as whenever I try to access and make a change to the IP configuration screen, I can't make a change that allows me to set up a static beaches.

    The manual that comes with the machine does not mention how to differentiate by using DHCP and static IP Setup.

    As I said, any help would be appreciated, as I want to, this machine works so everyone can access it wherever they are in my house.

    See you soon

    Pop

    Type the IP address in a browser.  You will see the internal settings of the printer.

    Click on the tab network, on the left side, wireless (802.11), then the IPv4 tab.

    On this screen, click on the box to manual IP option, and then type your IP you want (outside the DHCP range).

    Use 255.255.255.0 for the subnet and the gateway router IP and DNS (the first one, leave the second empty).

    Click on apply and wait.  Then go to the NEW IP address you assigned and check the communication.

  • Why is there no activation key when I switch to 10 Windows in Windows 7?

    I bought a Windows 7 full version, final Version in China before. But, when I upgraded to Windows 10 successfully, he only told me that the Windows system has already been activated, rather than tell me what the game activation key is. I wonder if I can get the activation key by calling Microsoft (r) 400-820-3800 or other methods.

    Things you should know:

    • A Windows 7 or Windows 8/8.1 product key cannot Activate Windows 10. Windows 10 uses its own unique product key.
    • By default, the versions of Windows 10 are previously entered, which means, you don't have to enter a product key and should not be invited to enter one as long as you upgraded a activated License of Windows 7 or Windows 8 or 8.1 of Windows or Windows 10 Preview build.
        

    • It does not need to know your product key Windows 10, read "Understanding Product Activation in Windows 10:

    Figure 10 Windows Product Activation:

    In previous versions of Windows, when you have installed a version upgrade of Windows, if you want to reinstall the upgrade version, you had first reinstall permissible version where you upgraded, reactivate, then upgrade again and reactivate again.

    With Windows 10, this is no longer the case. Once you have upgraded to Windows 10 and enable, you can simply create a bootable copy on DVD or USB and reinstall all Windows 10 without having to reinstall the release candidate and it automatically reactivates.

    Quote:

    "10 keys Windows handles differently. When you migrate to Windows 10 via Windows Update to 8.1 Windows or Windows 7, the process saves your eligible hardware and OS computer with a Microsoft Product Activation Server. The device is considered as a device Windows 10.

    "Thereafter every time you re-install (or clean install) installation check in with these servers, concludes the unique installation ID and product validation.

    ZigZag3143 (MS - MVP)

    To learn more:

    http://answers.Microsoft.com/en-us/Insider/wiki/insider_wintp-insider_install/how-to-activate-and-resolve-common-product-key/33f31475-93B3-4D1C-812F-4b21fbd807a7

  • We add a wireless "router sub" or to our current router Linksys router cascading

    Hello

    Add a router under or a router cascade to our current Linksys router because when we have people at the meetings, we do not want our regular wireless accessible by all.  We look at the HD Video Pro EA6500.  Do we need to buy a bridge?  No matter who is the master and who is the slave?  Are there more questions, what should I ask?  The EA6500 is compatible with all other models of Linksys?   I read some of the questions and answers on this forum of the Linksys community but I don't know where I should start.

    Thank you very much.

    The Smart AC Linksys router Wi - Fi 1750 HD Video Pro, EA6500 allows you to access the Internet via the Wi - Fi and.  Router Linksys Smart WiFi, EA6500 is ideal for applications focused on media such as streaming video, games and voice over the Internet (VoIP) phone.

    More control over these articles.

    Get to know the router Linksys Smart Wi - Fi, EA6500

    Linksys router Smart Wi - Fi, EA6500 frequently asked questions

  • SRST and the local unit

    We plan to put in a system of the unit in a place with only SRST because there premises. Our current environment is the primary site has two Callmanagers, a unit, and currently we have two remote SRST sites that link to the principal for the unit. I saw a post from August 2003 which indicated that this was not possible. This has changed or is this always the case.

    4.01 CallManager and unity 4.0 (4)

    Thank you

    Tim

    The problem is that the unit can not join the SRST router as IP phones can. So if your link between unit and CCM went down the unit would not able to take calls.

    If it's something that doesn't happen often it would not be a big problem for you because many customers consider to be less critical than real phones voicemail.

    It is essential that we have not really a great story. Put the unit on the same LAN as an Exchange is the right choice to make. Perhaps some sort of WAN redundancy can be another option, you can explore.

    I think the feature is necessary but customers really did not push teams account for that if you don't see it in product offerings. If it is important you should let them know.

    Thank you

    Keith

  • Help: Multiple SRST

    Hello everyone, Im currently working on how to make our network quite elastic in the case where our CCM (standalone) 5.1 is not available. Im trying to set up a redundant SRST. The only problem I see is that a single reference SRST per device pool, and one of the required parameters is the "Hostname". Just wish I can assigned the virtual my HSRP routers running Gateway. Is there a way I can assign several SRST in a device pool?

    I have set up 3 SRST router and each of them belongs to different device pool DP. All partitions and calling Search spaces were already configured on the MAC, so I expected that when I disconnect the CCM from the network, routers SRST will inherit (Partitions and CSS) parameters of the CCM. However, when all my Phones IP went to mode rescue SRST. All of them are now isolated in their own pool of device. There is no work around how to let these IP phones to communicate to any other IP phones in an another DP in rescue mode?

    Thank you

    You can only have 1 SRST reference, there is no way to add more than that.

    the only way to have redundancy SRST is to have HSRP and have the two GWs with connection to the PSTN, whether you need inbound/outbound calls. If only HSRP internal then just for the local network.

    SRST does not inherit CSS and partitions, just register phones using the unique name that they currently have because they lost communication to their main server of CUCM

    When phones goes to SRST they work very similar as with the GUY, but he has no HORN in there, so any phone that records the same GW will reach all other phones.

    I have not tried myself, but maybe you can configure a dial-peer that points to the other router and try a call, if that does not work then the only way would be to call using the PSTN.

    HTH

    javalenc

    If it helps, please note

  • Tecra M2 can't see the wireless router

    I have a Tecra M2.

    I see our home wireless router and all our neighbors Wi - Fi, but very often the laptop does not see our router. The only way to solve this problem at this time is to plug the Ethernet cable and change the wireless channel.
    He can see the router but after a while, he stops seeing the router.

    There is nothing wrong with the router as my laptops of business is never a problem given the router and my laptop s son.
    Help, please!

    What operating system do you use?
    Have you installed the latest WLAN driver?
    Have you tried changing the WLAN settings on your router?

    Try changing the settings of the router. Experiment with different settings. It is not easy to give a precise answer.
    What we know, it's that you have Tecra M2 and anything else that may be useful to understand your problem.

  • Under Parental controls activity report is "not responding".

    Under Parental controls there are activity reports. I want to watch all the websites visited, but every time I try the program is not responding. It will allow me to watch everything else but that. Help!

    Hello randim,.

    Thank you for using the Microsoft Answers forum.  If you logged in with an administrator account?  You will need an administrator account to view these files.

    Thank you for using answers Forum. Please let us know how it works.

    Joseph
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • How to change the encryption type M252dw printer WPA2 (WPA - PSK) for the WPA used by the router?

    We had to change the type of encryption on our WPA2 WiFi router (LAN setup origin, on which to install and successfully used our M252dw printer) and use simple WPA, to solve some other problems of connectivity.

    NOW, the HP printer, we have (M252dw) apparently does not automatically reset the encryption type.

    Apparently, he has no way to automatically start "from scratch" when connecting to the new configuration of router.

    Even with ALL the rest on the LAN works fine and speaking well, including WiFi laptops and smart phones, the HP printer sees the new name of WiFi SSD connects to the router in order to attempt a connection, accepts the new password WPA, but RETAINS THE WPA - PSK PARAMETER OF CONFIGURATION PREVIOUS.

    We know, because after that the printer fails to connect, print the network SHOWS Test report this known problem in the paragraph of the resolution of the problems, but worthless advice said to "run the setup of wireless network for re - enter your network WPA wireless security password. The WPA authentication on your HP printer has been changed from the default setting. This can cause problems connecting to your wireless network, if your wireless router does not use the same breed of WPA authentication.

    Well, DUH.

    Mind you, there is NOTHING in the post above that says:
    1) go to "this" menu item.

    2) click "this" option to change the encryption method.

    (3) select the method (SSID, WEP, WPA, WPA2) that corresponds to your router.

    ... because... There seems to be NO option ANYWHERE in ANY menu that offers this choice.

    HE DIDN'T THERE HAS NO BUTTON, OPTION, SELECTION, OR ADVICE IN THE MANUAL TO RESET OR CHOOSE WPA!

    There is a checklist wonderfully unnecessary, repeated throughout your manuals and on the site, basically saying

    ' Check the type of printer encryption (WEP, WPA, WPA2, etc.) corresponds to the router.

    Well well... What do you do when you KNOW that it IS NOT?

    Thanks to try at least, I appreciate it.

    Unfortunately, it did not work;

    but it leads to find the answer for later use.

    Summary -

    After selecting
    Printer flow treatment and deleted the saved connection data, an IPv4, subnet mask and default gateway address (router address IPv4) and IPv6 turned power on.

    Then... I did this:

    (1) Went back to and IPv6 turned to back, leaving only ON IPv4.

    2) went back to and returned once again the preferred settings.
    Address: 192.168.254.250

    Mask: 255.255.255.0

    Default gateway: 192.168.254.254

    3) reinforced by the "Wizard" where he immediately found the SSID of the wireless router.

    (4) select the SSID of the router

    (5) when it is asked for the password (which is actually just a 'word' with WPA pass) I got that.

    (6) given the printer attempts to connect and failed.

    WPA - PSK same listed, even noted on the test report from network once more.

    Therefore, no chance after Restore Defaults.

    It really would have been nice if HP had made sure this option actually actually reset * ALL * default settings, including the wiping WPA2 security type.

    (Just for reference, the DHCP range is set to 192.168.254.15 - 192.168.254.47, so that the fixed IP addresses assigned, like this printer, you can assign DHCP to be defined to ensure no changes outside.

    This printer is the FIRST device assigned a fixed IP address, to make sure that nothing else can come into conflict with the IP address and eliminate it as a cause as possible.)

    OK - so after your suggestion, I am inspired to re - enter the menu and look at it again.

    I had already looked through what I have and not able to find the submenu I thought that has been included by HP...

    .. .or I would expect a user was manually choose method/type of security encryption (SSID, WEP, WPA, WPA2)

    .. .or at least handed to "REMOVE/RESET/nothing: Please ask the next router you are trying to connect to use"

    One thing I found there is the option that resembled what I wanted now:

    That seemed to be the best thing after trying to 'Network Defaults' so I did.

    Then did a not through all the steps above, 1-6...

    * SUCCESS *.

    ALSO: The printer is already running on each PC had to be "retired" in Windows

    -According to the right

    -Then follow up

    -Waited for printer not found, click it, and then select

    Thank you HP - I just needed to find out who Reset was correct.


    Now - I humbly suggest stating that in the manual.

    Under the line "Verify encryption type corresponds to router", you could add something simple like:

    "IF it isn't, then select and your printer will automatically ask the next router you are trying to connect with and correspond to this type of encryption."

  • PROBLEM CONNECTING TO A MODEM/ROUTER TO COMCAST

    My husband is trying to connect to my laptop to WORK FOR our COMCAST Modem/Router (IPV4) House.  There is a link between the laptop and the modem/router.  However, I can't get out to the internet WIRLESSLY and need to use a WIRED CONNECTION.  He did an audit of the IPCONFIG command AND maybe he thinks running IPV6 as we do at work.  It's what the IPCONFIG/all command shows:

    IPv4 address: 172.X.X.20 (preferred)

    Subnet mask: 255.255.0.0

    DHCP SERVER: 172.x.x.1

    IAID DHCP: 2255216532

    DHCPv6 Client DVID: 15-digit number

    Is that mean that the computer is configured to run on IPV6 instead of IPV4?  My husand does not have IPV6 on our home network?

    He doesn't have SYSADMIN access, is there a way to fix this without sysadmin access?

    Leticia

    Hello Leticia,

    Welcome to the Microsoft community.

    What is the brand and model of your computer?

    Launch us network troubleshooting utility in Windows 7 that allows anyone to diagnose and fix network problems.

    Using the troubleshooter from network in Windows 7

    http://Windows.Microsoft.com/en-us/Windows7/using-the-network-troubleshooter-in-Windows-7

    Make sure that all network drivers are up-to-date. You can follow the steps in the article below.

    Automatically get recommended drivers and updates for your hardware

    http://Windows.Microsoft.com/en-us/Windows7/automatically-get-recommended-drivers-and-updates-for-your-hardware

    More information

    Wireless and wired network problems

    http://Windows.Microsoft.com/en-us/Windows/network-connection-problem-help#network-problems=Windows-7&V1H=win81tab1&V2H=win7tab1&V3H=winvistatab1&v4h=winxptab1

    Hope this information is useful. Feel free to get back to us if you need further assistance.

Maybe you are looking for

  • Firefox tells me to update Adobe Reader and after I try to do Adobe said that I already have the latest version.

    Firefox shows that my Adobe Reader software must be updated to version 11.0.84 and when I try to update Adobe Reader, it tells me that I already have. I also did an update of Firefox and I still have the same problem. I use Windows XP SP3. I don't kn

  • Windows 7 and bf 1942

    I'll start with plugASUS m4a79t deluxe8G kingston hyper x ddr 1600 3 plug the value2-4870 in xfire2 150 G velociraptors in raid 0Phenom AM 3 965Zalman cnps 9900 led1010 w power supply FSPFatality XFI Platinum (P last 7 drivers)Antec 1200 caseW7 64 pr

  • Is junk Media Player 11?

    I got a Sansa 8 GB player for Christmas and had to submit to a bunch of crap even get my computer to recognize it.  Media Player 11 downloaded now receive.  I put it back using a go, make playlists and try to understand how the band's music and put i

  • How can I install Paperport Version 11.1

    I have been informed that Windows 7 doesn't support Paperport Version 11.1.  There will be a patch to allow installation of this program?

  • How to import a dbx file unique to Windows Live Mail?

    I imported my files of dbx to Outlook Express 6 for WLM (Windows 7) last month, but a valuable record has been lost due to corruption. Now, I discovered a forgotten dbx backup that I'm desperate to add to WLM7, but it does not recognize the dbx file.