There there is no disc in the drive, please insert a disk into Drive\Device\harddisk\Dr2 - file msg 'sump.exe '.

This message is long but not something that appears more than once when you start the computer. Research in the management of the computer does not have errors or obvious things to fix. Most of the time just turn off the computer and start again solve the problem. I want to fix it for good if anyone has a method. Cancel, retry and closing does not work at

all.

Probably because you have this somewhat dubious "SpeedupMyPC" Uniblue Sytems installed program. Do yourself a favor and uninstall

Tags: Windows

Similar Questions

  • When I plug in the USB on my netbook and you want to open, it tells me that there is no disc in the drive?

    Original title: BAD USB

    I have an Acer netbook. I was able to download my photos from my computer on a USB key until a few days ago. When I plug in the USB on my netbook and you want to open, it tells me that there is no disc in the drive?  Why does it say this?

    I am confused with this... I really hope someone can help me.

    Thank you for your time in doing

    Dido

    Hey Toni-LeeFurlotte,

    ·         Have you tried to connect to a different USB port?

    Method 1: Try to connect the USB key to a different port on the netbook and check the issue. You can also connect the drive to another computer and see if the problem persists.

    Method 2: Update of the netbook with the latest chipset drivers. In addition, install other updates of the device driver. Log in the Web site of the manufacturer to do the same thing.

    Method 3: This problem can also occur if there is a drive letter conflict. A drive letter conflict occurs if the disk that is affected by the error is mapped to a reserved drive letter. I suggest you try to change the drive letter.

    How to change drive letter assignments in Windows XP

  • Why do my windows media sometimes not recognize that there is a disc in the drive when I am trying to burn music on the disc,

    Original title: windows media problems
    Why do my windows media sometimes not recognize that there is a disc in the drive when I am trying to burn music on the disc,

    If you restart WMP when this problem occurs, which helps?

    It seems that the AutoRun or AutoPlay got disabled on your system. Please try the instructions in the following article to reactivate these:

    http://support.Microsoft.com/kb/330135

  • How to remove the error message there is no disc the disc in the Drive\Device\Harddisk1\DR1

    There is an error message which keeps popping up and I push to cancel several times before it will go away however he comes back to the top on my screen at random times. Meesage hpqtra08.exe - no disc, then below it reads "he not there no disc insert disc in the Drive\Device\Harddisk1\DR1.
    Please help me to remove it from my computer!

    Hello lala80,

    Thank you for using Microsoft Vista answers Forum!

    hpqtra08.exe is normally installed as part of the HP all-in-one printer, scanner, driver copy and install the software. It is a non-essential process, and it is at the discretion of the user, whether to disable. If disabled buttons as scan in the 'all-in-one' continues to work. However if you never use it it is safe to disable. It does not work, just the button scan in the multi functional.

    You can disable this feature by using msconfig in Windows.

    Click Start and type msconfig in the search box and press enter

    Click the Start (top row)

    In the list of programs, uncheck hpqtra08.exe

    If please reply and let us know if your problem is resolved or if you need more help

    David O
    Microsoft Answers Support Engineer
    Visit our and tell us what you think.

  • When you install Visual Studio 2005 (Standard Edition) on my Vista system, the installation fails because of this error: there is no disc in the drive. Insert a disk in drive \device\harddisk5\dr5

    When you install Visual Studio 2005 (Standard Edition) on my Vista system, the installation fails because of this error: there is no disc in the drive. Please insert a disk into drive \device\harddisk5\dr5.
    My C: drive is my main area on the HARD disk.  The D: is the original Image. There are 5 locations of media FJ. the CD/DVD is E:. I have several USB ports, and a Magic Jack plugged into one of them..., printers, scanners, mouse and keyboard are also USB
    Are installed:
    FW MS .NET 1.1
    MRS. NST FW 3.5 sp1
    MS SQL Server 2005
    MS SQL Server 2005 compact Edition [ENU]
    MS SQL Server 2005 Native Client
    MS SQL Server Setup Support Files
    MS SQL Server VSS writer

    Here is the error log:
    [06/14/11, 13: 52:00] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64): [2] error code 1603 for this component means "Fatal error during installation." [06/14/11, 13: 52:00] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64): [2] Setup failed on component Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) [14/06/11 13: 52:01] setup.exe: ISetupComponent::Pre/Post/Install() [2] failed in ISetupManager::InstallManagerHelper() with HRESULT-2147023293. [06/14/11, 13: 52:01] setup.exe: [2] error component not specified in ISetupManager::AddToActionResultCollection() string [14/06/11 13: 52:12] VS70pgui: DepCheck [2] indicates that Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) is not installed. [06/14/11, 13: 52:12] VS70pgui: component [2] Unknown status double Visual Studio 2005 Remote Debugger Light (x 64) [14/06/11 13: 52:12] VS70pgui: status unknown double component [2] Document Explorer 2005 [06/14/11, 13: 52:12] VS70pgui: DepCheck [2] indicates Microsoft Visual Studio 2005 Standard Edition - ENU was not attempted to be installed. [06/14/11, 13: 52:12] VS70pgui: component [2] Unknown status for.NET Compact Framework 1.0 SP3 [14/06/11, 13: 52:12] VS70pgui: [2] for.NET status unknown component Compact Framework 2.0 [14/06/11, 13: 52:12] VS70pgui: [2] double of unknown status component Visual J# 2.0 Redistributable Package [14/06/11, 13: 52:12] VS70pgui: [2] status unknown forSQL component Server 2005 Mobile Edition [14/06/11 [, 13: 52:12] VS70pgui: [2] double of unknown status component Microsoft Device Emulator version 1.0 [14/06/11, 13: 52:12] VS70pgui: component [2] unknown status double SQL Server 2005 Express Edition x 64 [14/06/11, 13: 52:12] VS70pgui: [2] component unknown status .NET Framework 2.0 SDK (x 64) double [14/06/11, 14: 34:40] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) : [2] error code 1603 for this component means "Fatal error during installation." [06/14/11, 14: 34:40] Microsoft Visual Studio 2005 64 bit Prerequisites (x 64): [2] Setup failed on component Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) [14/06/11 14:34:42] setup.exe: ISetupComponent::Pre/Post/Install() [2] failed in ISetupManager::InstallManagerHelper() with HRESULT-2147023293. [06/14/11, 14:34:42] setup.exe: [2] error component not specified in ISetupManager::AddToActionResultCollection() string [14/06/11, 14: 34:52] VS70pgui: DepCheck [2] indicates that Microsoft Visual Studio 2005 64 bit Prerequisites (x 64) is not installed. [06/14/11, 14: 34:52] VS70pgui: component [2] Unknown status double Visual Studio 2005 Remote Debugger Light (x 64) [14/06/11, 14: 34:52] VS70pgui: status unknown double component [2] Document Explorer 2005 [06/14/11, 14: 34:52] VS70pgui: DepCheck [2] indicates Microsoft Visual Studio 2005 Standard Edition - ENU was not attempted to be installed. [06/14/11, 14: 34:52] VS70pgui: component [2] Unknown status for.NET Compact Framework 1.0 SP3 [14/06/11, 14: 34:52] VS70pgui: [2] for.NET status unknown component Compact Framework 2.0 [14/06/11, 14: 34:52] VS70pgui: [2] double of unknown status component Visual J# 2.0 Redistributable Package [14/06/11, 14: 34:52] VS70pgui: [2] status unknown forSQL component Server 2005 Mobile Edition [14/06/11 [14: 34:52] VS70pgui: [2] double of unknown status component Microsoft Device Emulator version 1.0 [14/06/11, 14: 34:52] VS70pgui: component [2] unknown status double SQL Server 2005 Express Edition x 64 [14/06/11, 14: 34:52] VS70pgui: [2] double status unknown component .NET Framework 2.0 SDK (x 64)

    Try to post or search the MSDN Forums

    http://social.msdn.Microsoft.com/forums/en-us/vssetup/threads

    http://social.msdn.Microsoft.com/forums/en-us/Vsexpressinstall/threads

    There are indications that some USB devices may cause this error. Try unplugging as much as you can.

  • Explorer.EXE - no disc: there is no disc in the drive. Insert a disk in drive \Device\Harddisk2\DR2

    Original title: \Device\Harddisk2\DR2

    I get this popup of the application:

    Explorer.EXE - no disc: there is no disc in the drive. Insert a disk in drive \Device\Harddisk2\DR2

    How can I get rid of it? I don't mean to access drive... it just popup as soon as I open my computer.

    Thank you

    John

    Hello

    ·         Do you get this error message when you restart computer?

    ·         You will remember to do recent changes on the computer before this problem?

    ·         You are able to open Internet Explorer?

    ·         You have a hard drive connected to the computer?

    I suggest to restart the computer in safe mode and let us know the status of the issue. Follow the steps in the link to start the computer in safe mode:

    http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

    Please see the link: how to fix explorer.exe - error disc no.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-hardware/how-to-fix-explorerexe-no-disk-error/76ef7ebd-5FCD-4c6e-9f33-50b6aae4a4e9

    You can also have a look at the following Suggestions for a question on the help forums:

    http://support.Microsoft.com/kb/555375

  • Starting problems, get the error "there is no disk in the drive. Please insert a disk into drive \Device\Harddisk1\DR1.

    1st problem: yesterday I started getting a popp window with the text following formulation - "there is no disk in the drive. Please insert a disk into drive \Device\Harddisk1\DR1' I have no idea what this introduced him or how stop it.  Any suggestions?

    2nd problem: whenever I restart my computer or shut it down and then power up the white bar that moves from left to right only moving to halfway through and then stops. I then have to hold the power button in until the computer turns off again and then rehit the power button. When it starts to power back up the white bar is always in the Middle, but then begins to finally complete the passage to the far right of the box. This problem started when I loaded the software for my printer Canon MX870 new that I bought and installed in October 2010 and has been done since then. I removed and reloaded the software of the printer on three different occasions but the problem persists.

    Hi frankb911,

    Please see the thread with a similar problem and fix possible:

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_vista-performance/there-is-no-disk-in-the-drive-please-insert-a-disk/b9a130b2-4261-4385-a51f-28005f209a1d

    I hope this helps!

  • Even after inserting a disc in the CD/DVD drive, my computer asks once again for a disc in the drive. "Please insert a disk into drive E".

    All of a sudden my computer asks 'for a disc in the drive. Please insert a disk into drive E ". I put an and closed several times and it says all right, then it is said again and again the same message. ?? Help

    Original title: disc E

    Hello

    Thanks a lot for posting your request on this forum. You have reached the right place, and I'll do my best to help you with this question.

    It would be awesome if you can explain this problem with greater clarity. Please provide the following information to help you better with this problem.

    (1) Windows operating system you are using on the computer?

    (2) what exactly you are trying to do on the computer? You try to install games and Applications using the installation CD/DVD?

    (3) what is the exact full error message you get?

    (4) when exactly you get this error message? It's when you try to start the computer?

    (5) are you can play any CD/DVD using the CD/DVD drive on the computer?

    (6) what are the recent changes that you made to your computer before this problem?

    Please get back to us with all the relevant information about this question for assistance. You can see the article below, so that it would be helpful for you to include all the required information.

    Suggestions for a question on the help forums

    Hope it will be useful.

  • Error when starting my computer code: there is no disc in the drive. Please insert the floppy disk in drive\Device\Harddisk3\DR3

    I just started getting this error in the last month.  It only happens when I start my computer.  I started to use Windows Live Mail Beta.  Would this have something to do with it?

    The problem was with Windows Live Sync.  Once I have not won, I didn't the message again.

    I'm fairly certain that this has nothing to do with Windows Live Mail beta - but it does not sound like a startup program any want a disc in the drive and that is what causes the problem.

    To boot from the hard drive, first of all, in the boot sequence, you may need to change the BIOS to hard drive first in the boot sequence (it is not always necessary and I have my system set to start first on the CD player and have no problem - but you have problems so we'll see if that fixes the).  To do this, hold the screen that tells you the key F to push to enter the menu start or start of installation.  Push it quickly. Make the changes, save your work and exit.  While there, make sure that there is no setting to boot the disk hard regardless of the boot sequence.  Reset.  Normally, it should start without the error message.

    If this does not work, what is the EXACT (including all codes verbatim) error message?  It refers to a specific file, and if yes, what is the file name?  Are you able to start despite the message or that you need to insert the CD in the drive and then it allows you to start?

    Try to boot into safe mode without any CD in the drive (repeatedly clicking the F8 key during the boot process until the menu appears) and see if it works or if you have the same problem.  If you can start in safe mode, it's a good sign.

    If this does not work, try a boot minimum http://support.microsoft.com/kb/929135.  If the problem goes away then it's just a matter of tracking down the culprit at the origin of the problem.   Follow the procedures described in the article.  Once found, remove, delete, disable or uninstall.  Once remember to put Vista in normal status, as described in the procedures. If the problem occurs in clean mode then just restore the system to normal and reboot - this solution will not work.

    If this does not work, go to start / search area and type msconfig.exe and enter, and double-click on the program icon that appears.  Go to the Startup tab and remove all checks, click OK, close the program and reboot and see if the problem persists.  If this isn't the case, then the problem is caused by something trying to boot at startup, and you may need to add the items back one by one, restarting after each one, until you find the culprit at the origin of the problem.  Then let this disabled element, double-check all the others that you actually want from startup, click OK, close the program and restart.  The problem should be solved.  If it's not working, then go back and re-check items that have been checked, click OK, and save the program and restart.  You'll be back to where you started, but we will have eliminated a very likely cause.

    That's all for now.  I hope this helps.  If the problem persists, I need more information about this message and all the files that he mentions.

    Good luck!

    Lorien - MCSA/MCSE/network + / has + - if this post solves your problem, please click the 'Mark as answer' or 'Useful' button at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

  • Acrobat.exe - no disc. There is no disk in the drive. Please insert a disk into drive \Device\Harddisk\DR1.

    I have Windows 7 Professional in my office. I get this error permanently on my PC.

    "Acrobat.exe - no disc. There is no disk in the drive. Insert a disc into drive \Device\Harddisk\DR1 ".
    I reinstalled Adobe Acrobat X. error message is yet to come again and again after a short interval.

    I have Windows 7 Professional in my office. I get this error permanently on my PC.

    "Acrobat.exe - no disc. There is no disk in the drive. Insert a disc into drive \Device\Harddisk\DR1 ".
    I reinstalled Adobe Acrobat X. error message is yet to come again and again after a short interval.

    I had the same error today and found the answer to my question.  Acrobat attempts to retrieve a file on a removable disk, which is no longer present.  In my case, it's an SD card.  I reinserted the card in the reader and acrobat then asked if I wanted to recover the file, to which I said no. Acrobat no longer shows the message at startup.

  • There is no disk in the drive. Insert a disc in the drive device harddisk5 dr5

    I started getting this error message "there is no disk in the drive. "Insert a disk into the drive device harddisk5 dr5.  I have to click on about 20 times and it goes away eventually.  I use Windows 7 and have been unable to find an answer to how to make this message go anywhere.  Any suggestion would be appreciated.  Thank you!

    Hello

    ·         Were there recent changes made on the computer before the show?

     

    This problem occurs when all the following conditions are true:

    (a) you have a removable drive, such as an Iomega Zip drive, configured as the drive letter C.

    (b) you don't have a removable disk in the removable disk drive.

     

    Method 1:

     

    Change the assignment of drive letter for the removable a drive letter other than C:\.

     

    a. log in the computer as an administrator.

    b. Insert a disk in the removable drive.

    c. type computer management in the start search box and press ENTER.

    d. click on disk management.

    e. right-click the partition, logical drive or volume that you want to change and then click on change drive letter and paths.

    f. click on the removable drive, click it, click on change, click the drive letter that you want to use, and then click OK.

     

     

    Method 2:

     

    I also suggest you to start the computer in a clean boot and check which program non-Microsoft is the origin of the problem.

    How to troubleshoot a problem by performing a clean boot in Windows Vista and Windows 7

    http://support.Microsoft.com/kb/929135

     

    Warning: After using the boot is a way to solve your problem step 7 follow-up to reset the computer to start as usual.

     

    Method 3:

    You can go to Device Manager and see if you have any yellow bang! for the mouse or devices.

    (a) click Start and then click Control Panel.

    (b) click on system and Maintenance link.

    (c) in the system and Maintenance window , click the Device Manager link at the bottom of the window.

    In Device Manager, go then, mouse or other pointing devices.

    Do you see a yellow fringe! This would mean that you have an error with this device. Try to remove and reinstall.

    I hope this helps.

  • There is no disk in the drive. Please insert a disk into drive F:.

    I use Windows 10.  I have several times the Question "Please insert a disc into drive F:. After one of the updated Windows Update, the problem disappeared for a few days. It is now again. Please do not ask what is obvious. There is no such disk to be inserted. I saw this virus in 2012. It is directly linked to Adobe. Especially at the start, Ps and Acrobat reader.

    On a previous occasion when I had the problem, Windows (10) forced me to update. The problem disappeared.

    Earlier I asked Windows Update, 2 minutes later the computer booted. The problem disappeared. I checked Acrobat, most boring, no problem. I have only checked Ps no problem. How long it will stay like that, I don't know. I can't MY DOCUMENTS, PICTURES, MUSIC some time yet. So, I'm not able to do anything with or for them. It will tell just me "Unauthorized" or something in that line.

    I appreciate your help.

  • Insert a disc in the drive \Device\Harddisk3\DR3?

    have a vi with sub about 20 screws in his .llb that makes a fair bit of the interaction of the data base and data acquisition.

    When it comes to 'entries preparation' sub vi in State "expt prep", if she is not simply close labview entirely, it gives 10 'Please insert a disc into the drive \Device\Harddisk3\DR3' errors in a row, then ends.  in fact some of the 10 are asking Harddisk4\DR4, but I still don't know what he's talking about.

    very mysterious, that is if I delete as void / vi and replace it with artificial constants, it does the same thing.  I use breakpoints, step over and highlight the execution and cannot see what is causing the error, it's like there is a short circuit in the wiring itself (!).

    was blocked for a day now.  thoughts?  tried to cut and paste the entire block diagram in a soft vi, labview opening/closing, restart, reinstall LV (2011 sp1) and daqmx 9.5.1 no effect.

    code attached

    new data - copy & paste the contents of the sub-vis & vi new screw do not affect not error, gutting all error DAQ hardware program priest DOES.  Board of Directors is a NI PCIe 6363.

  • DVD Rom won't recognize there is a disc in the drive

    My uncle gave me his old computer for Christmas. Before it was given to me it was sent for a tech restore the computer to factory setting. I think that they wrote zeros to the hard drive and started it completely.

    I used a few weeks after I had put the computer because I had installed something that did not work, System Restore. I had not won it first, but always ended up doing a system retore to when the computer is first restarted.

    Now my DVD Rom will not notice when a disc is in.  Him sometimes turns on, but the computer does not appear there in a disk. I looked in my computer and the CD drive is listed as empty.  Even when I try to play a DVD. The drive appears in the list player however.

    Any idea what I could have done wrong or how to fix this problem?

    Thank you.

    LisaAC salvation,

    · What is the service pack installed on your computer?

    · What is the number and the model of the computer?

    Follow the steps listed in the link below: how to troubleshoot common problems that occur when a Windows XP-based computer cannot read a CD or DVD: http://support.microsoft.com/kb/321641

    With regard to:

    Samhrutha G S - Microsoft technical support.

    Visit our Microsoft answers feedback Forum and let us know what you think.

  • «There is no disk in the drive.please insert a disc in the drive \Device\Harddisk1\DR4.»

    Hi all!

    When I try to install AVG on my WINDOWS XP SP2, a message is displayed with Titile "scvhost.exe - no disk" and the body of the message said that "there is no disk in the drive. Insert a disc into drive \Device\Harddisk1\DR4.

    attachment: -.

    http://i51.Tinypic.com/6zoaoo.gif

    or

    Please help me as soon as possible!

    Thank you very much!

    Post in the forums of users AVG.

Maybe you are looking for

  • Can not connect to the account in Thunderbird

    Previously, I was able to log-in using my desktop icon. I can't connect to my account. How can I access my account? I tried tried the method shortcut and right clicking on the icon and choose 'open '.

  • THINKPAD TABLET 2 AUTO SCREEN DIM QUERY (AMBIENT SENSOR)

    Hi all I bought my brand new model of Tablet Thinkpad 2 64Gb 3G yesterday and I love it. But I have a question on how to disable the automatic brightness adjustment. The unit fades constantly according to the use and it is quite annoying. Anyone know

  • Upgrade of a socket AMD APU FM-1

    I have a DV7-6169NR of the APU A6 - 3400M. I found the instructions to change the APU, but no list of the APU support. Any Jack FM-1 APU will work in my laptop? Thank you B

  • Photosmart B110 new code to add to the ePrint

    I printed the form with my printercode, but when I want to submit it to the site it is said that the code has expired. I printed a new form, but I get the same code. How do I reset and print a new code and why is it expired?

  • Need to change the palette display function

    Hello! I looked through the options, but don't not found how to do function pallet to be able open Subvi cumstom location. I have attached two photos - it displays what I and the second picture shows what I want. PS: I have LabView 7.1