There was a problem starting msijip32.dll
Dear Microsoft support,
"" I have a problem with my windows 7 Professional 32 Bit, when windows starts and loads come error "there was a problem starting msijip32.dll" the specified module could not be found. »
Please please advice on the problem.
Thank you in advance.
Kind regards
Mary
Hi Mary,
If I understand correctly you are facing some problem with the file .dll to boot at startup. Do not worry, I'm here to help you with this question.
I would like to know more information on the issue, so that we can help you better.
1A the question started recently?
2. What is the correct .dll file in the error message?
3. have you made changes on the computer before this problem?
Let us try the following methods and check if it works for you.
Method 1:
Start in safe mode and check if the problem persists. If the question does not persist in safe mode, and then turn on the computer in a clean boot state and check the application or program is causing this issue. Place the computer in a clean boot state will help you determine which app/program is causing this problem.
Step 1: Start in SafeMode in Windows 7:
http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode
Step 2: How to troubleshoot a problem by performing a boot in Windows Vista or Windows 7:
http://support.Microsoft.com/kb/929135
Note: once you have completed troubleshooting, try the procedure described in step 3 to reset the computer to start as usual.
Method 2:
Scanner System File Checker tool to verify if the .dll file is a system file or not. If it's a file system, then the scan of the System File Checker tool will help you replace the files obtained.
How to use the tool File Checker system to troubleshoot missing or corrupted on Windows 7 system files: http://support.microsoft.com/kb/929833
Method 3:
If the problem started recently, then restore the system to a point when the computer was working fine.
System Restore: http://Windows.Microsoft.com/en-us/Windows7/products/features/system-restore
Please reply with the status of the issue, so that we can better help you.
Tags: Windows
Similar Questions
-
There was a problem starting APISupport.dll. How can I solve this problem
I get this error message everytime I turn on the laptop. "There was a problem starting APISupport.dll. The computer works fine, so I need this module and if I do not how I get rid of this error message.
This might help:
-
There was a problem starting msiftb32.dll, the specified module could not be found
There was a problem starting msiftb32.dll, the specified module could not be found
There was a problem starting msiftb32.dll, the specified module could not be found
This will help...
How to fix Msimg32.dll not found or missing errors -
Starting Windows error: "there was a problem starting msistw32.dll.
Original title: I use windows 7, when I log in, the following error message 'There was a problem starting msistw32.dll' to come.
I use windows 7, when I log in, the following error message 'There was a problem starting msistw32.dll' to come.
Probably as a result of malicious software or your one AV program removeing infection, but leaving a residue.
Check msconfig > startup for a questionable entry tab
-
There was a problem starting msivtt32.dll, the specified module could not be found
Please what do I do? When I start my system it comes up and I get this message
There was a problem starting msivtt32.dll
the specified module could not be foundI have not found a single reference to this particular dll and it suggests that it is against malware. Take a look at this Web site as it has got some great instructions on removing malware.
http://www.selectrealsecurity.com/malware-removal-Guide/I hope this helps.
-
There was a problem starting msiihy32.dll that the specific module could not be found?
When I start my computer, I got this message there is a problem starting msiihy32.dll the specific module could not be found, and I downloaded the msiihy32.dll, but still have the message so what can I do?
Hello
Where did you downloaded it go?
Google has little information about this file, so it's probably a Malware startup more entry left which has been removed from your security programs.
Download, install, update and scan your system with the free version of Malwarebytes AntiMalware:
http://www.Malwarebytes.org/products/malwarebytes_free
@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
If the problem persists after scanning, take these startup entries:
«How to use MSCONFIG in Windows 7»
http://netsquirrel.com/Msconfig/msconfig_win7.html
You can also use this free program to do, too:
"Autoruns for Windows V11.32"
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
See you soon.
-
Startup error message there was a problem starting msijtu32.dll
Original title: How can I make mistake msijtu32.dll Pentecost?
Hello
When I turn on my system and the newspaper to my windows it shows an error that I download the picture of it in this link: http://upin.ir/images/qoeodojaskpaiinajy49.jpgScan the PC with all these free tools
http://www.Malwarebytes.org/products/malwarebytes_free
http://www.SUPERAntiSpyware.com/
http://www.Microsoft.com/security/scanner/en-us/default.aspx
-
Original title: a pop-up window.
I have three questions.
First, is there a way to do a refresh or low level format in Windows 7, as it is in Windows 8?
Secondly, I am running Windows 7 Ultimate, Intel Core i7 860, Biostar a 85 W CPU, 32 GB, 240 GB SSD, 1 terabyte storage SATA disk drive, and and anAMD A10 5800 K - 8 p-2 with a backup card video AMD Radeon HD 6670. Question is that when I run Speccy, Bell, or CPU - Z arc, it shows only 2 hearts working. Is there a way to turn the hearts of all who I missed, or they do not open as software requires?
Thirdly, recently I started to get this message. I see him two times:
There was a problem starting C:\progra~\common~\system\Sysmenu.dll. Specific module Couldnot find.
I've used windows repair just before installation, my repair disc I created when I put to the top of the machine, ran Reimage, producer of energy, ran Malwarebytes pro and Avast Pro to find the malware or virus, System Restore used to back at a time well before the problem presented itself, cleaned everything off start Ms config looking for abnormal and any processes that I could think of. But the problem remains. I think I watched it so long my brain wanted to mush. Help! Mike Stone
E-mail address is removed from the privacy *.
We Fri, 5 September 2014 20:11:29 + 0000, MikeStonesx wrote:
I have three questions.
First, is there a way to do a refresh or low level format in Windows 7, as it is in Windows 8?
See JW Stuart's response to you.
Also note that a format of low-lever has noting to do with any version of
Windows. It's a hardware problem, not a a Windows. And it must never
be done on any modern hard drive; It would destroy the disc. -
RunDLL
There was a problem starting
\AppData\Local\PLATYTO~1\Updater.dll C:\Users\ (snip)
The specified module could not be found.
Original title: that means the attached error message, how will this affect my use of the computer, and how to fix it? Thank you, C
This arose before a few times.
It can be useful also running a full anti-virus update. In addition, download install update and run a scan complete with free malwarebytes (keep it free, no need to trial etc.) as a check of the backup.
-
Original title: RunDLL
RunDLL
There was a problem starting C:\Program HP HP Deskjet
3050 a J611 Series\bin\HPStatusBL.dll
The specified Module could not be found.
Hello
Here's a Thread on the Forums of HP Support on your error message and methods to fix.
"There was a problem starting C:\Program HP HP Deskjet 3050 a J611 series\bin\HPStatusBL.dll. The specified module could not be found. »
See you soon.
-
{I get the message: there was a problem starting C:\Users\jbondjbond\AppData\Local\Google\{F068CE0-714C-4 55F - 8A 56-F54EE47CB100} \qfjcfre.dll the specified module could not be found.
This happens every time I restart the computer. I tried to uninstall and reinstall Google Chrome which is the only Google on the computer. It did not help, I still have the problem.
HelloIt seems that you receive an error message at startup 'there was a problem starting.C:\Users\jbondjbond\AppData\Local\Google\[F068CFE0-714C-455F-8=A56-F54EE47CB100]\qfjcfre.dll. The specified module could not be found. ».-What operating system is installed on your computer?-Do you have Google products installed on your computer? (Picasa, in car)-Did you do changes on the computer before this problem?Your response is very important for us to ensure a proper resolution. Please get back to us with the information above to help you accordingly. -
I am running Win 7 Pro. On startup, I get a msg of error DLL RUN as follows: 'there was a problem starting C:\ProgramData\ctfmdctr64.dll. The specified module could not be found. »
The error msg box provides an OK button. After clicking this button, everything seems to work well.
FYI, I use AVG Virus Protection program. I did a system restore to a date before when I think that this problem started. No luck there.
I suspect some malicious programs hiding somewhere and part of it may have been removed by AVG, but not all. Anyone know what program calls for this file? How can I get rid of this problem? Any suggestions would be welcome.
Thank you. f* address email is removed from the privacy *
Disabled under msconfig.exe startup items are moved to this location in the registry:
HKEY_LOCAL_MACHINE Tools\MSConfigTo permanently delete, you can delete the key relevant to this place. Method of the prudent man will like so:- Burn a CD of Windows repair. Everyone who makes his own PC must have a maintenance.
- Create a System Restore Point.
- Start the computer with the CD in repair and check if the above Restore Point is visible.
- Start normally.
- Remove the offending registry key.
Please mark my answer as 'Response' in this thread so that it can be closed. -
There was a problem starting C:\Program HP HP Deskjet 3050 a J611 series\bin HP StatusBL.dll
This is a direct consequence of my delete a printer in my list of installed printers
Recently, I deleted a printer from my PC because I have more access to it. Now, I get this message everytime that I have started. Respect to the printer that I deleted
Hi David,
Download SINO by Artellos & save it to your desktop.
http://www.artellos.com/cCount/click.php?ID=9 (download links: last download exe)
Right-click on SINO.exe and choose "Run as Administrator" to run it.
Then check the following boxes (check) only:Services
Startup itemsOnce activated, press the analysis of execution! button and wait for the program to finish. It should not take long.
Search / search: "monitor alerts of ink."
Delete it.
If you could remove sino & it's log file too if you want - just right click and delete.
Hope this helps, let me know.
Kind regards
Joel
-
Original title: run DLL error message
When I start my computer, this error message box appears: run a DLL there was a problem starting C:\users\Maureen\AppData\Local\Temp\ the specified module could not be found. I tried to run malware byte scan Antivirus scans, security analysis of microsoft, microsoft's malicious software removal tool, scan, prevx, and nothing was found. I'm not very well informed about computers, but this error box is annoying and I would like to quit smoking. Thanks for your help.
Hello MaureenCYB,
Thank you for the question!
I'm sorry to know that have problems you with the startup message. As I understand it, you get an error message "Run DLL there was a problem starting C:\users\Maureen\AppData\Local\Temp\ the specified module could not be found" when starting.
I need to ask you a question to help you best.
Were there any changes (hardware or software) to the computer before the show?
To help resolve the error and other messages, you can start Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.
How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7
Note: follow step 3 to reset the computer to start as usual after the boot process.
Answer to us if you are having problems with error starting or any other issue of Windows, and I'd be happy to help you again and try to correct the problem as soon as possible.
Good day!
Hope this information helps.
-
At startup, it appears on the computer {there was a problem starting c:\ProgramData\mshtcaui64.dll the specified module is not found. What is the solution to reinstall or do I need this in the computer? Email * address email is removed from the privacy *
This program will show you what's running at startup on your computer. You should be able to track down what exactly tries to run that cause you the problem.
Autoruns from Sysinternals
http://TechNet.Microsoft.com/en-us/sysinternals/bb963902.aspx
I hope this helps.
Maybe you are looking for
-
Several updates have been installed last night, 02132014, and now Bing diverts my research. I removed my bing programs and deleted Microsoft Search, but there are still when I try to do a search in the address bar.
-
Can not hear record web radio on my Satellite A100
Hello everyone, I have a little problem with my sound card, when I save the web radio on my PC with the Audiograbber software, I can hear the sound while recording, but nothing is recorded (just a file with the length of the song, without the sound),
-
Smartphones blackBerry Desktop Device password does not work
When I connect my Storm to my PC via a cable ubs, a pop-up box to request my password for the device, but it does not accept my correct password. I guess that's the same password I use on my device each time that I unlock it. I tried turning power s
-
Remove the button is gray, after I sign a PDF
Yes, I can't delete and insert pages in a PDF file once it is completed and signed and registered remove and insert buttons is grayed out. But I can remove and insert pages before being signed and recorded why? It is not a document protected password
-
Impossible to draw circles or squares in Captivate (now the SHIFT key does not.)
HelloI am trying to add seats and circle shapes to a Captivate 8 project.Until I click to draw the shape, I hold down the SHIFT key to constrain the proportions. Captivate draw me an oval or rectangle all the same.Error test I tried:You attempt to ad