There was a problem while creating or uploading your shared prototype
Hi Hello, I can´t, share or update my prototypes due to an error (error 45), I've attached a screenshot of the problem.
Thank you in advance for any help you can give me
Hey Diegox23-
Thanks for posting! We had an unexpected service failure this morning, which was resolved a few hours before. We apologize for the inconvenience - try sharing again!
Thank you
-Elaine
Tags: Adobe XD
Similar Questions
-
In Windows Live Mail, I can't send emails. Get the notice "a problem occurred while trying to open this message. There was a problem. Please try again.
The title says it all, except that it is a new development.
Hi StanFortenberry,
You can check out the following link and check if it helps:
You can also post your request in the Windows Live forum for assistance.
Check out the link:
http://windowslivehelp.com/product.aspx?ProductID=15
Hope this information is useful.
-
There was a problem creating the destination folder. If please check the permission of folder or choose a different folder. What that means, tried to name several different folders, but still the same error message. Would be grateful for the help!
This means that the folder you want to create is blocked because of file permissions. The drive or folder you are trying to create the destination folder is set to read-only, and your username does not have write permissions.
-
I am facing a problem while pay buy creative cloud this message appeared (there was a problem processing your order, please contact our Service team customer care for assistance), whatever?
Since this is an open forum, not Adobe support... you must contact Adobe personnel to help
Chat/phone: Mon - Fri 05:00-19:00 (US Pacific time) <===>===> NOTE DAYS AND TIME
Don't forget to stay signed with your Adobe ID before accessing the link belowCreative cloud support (all creative cloud customer service problems)
http://helpx.Adobe.com/x-productkb/global/service-CCM.html
-or by phone http://helpx.adobe.com/x-productkb/global/phone-support-orders.html -
* Original title: Windows 8 reinstall could not start
Try reinstalling Windows 8 (x 64 OEM version), but after clicking on start, I get the following error:
"There was a problem, restart your PC. Has been no change. »
Ditto for the Refresh tool. Verification of the Solutions tool thinks for a minute, then disappears. Have tried to introduce these tools after boot, as well as an assortment of other boards around the internet such as the cmd line queries. Any thoughts? Had the PC for a year now, no weird mods or alteration of configuration, just installed Office and a few games of limited resources. As a single user, I have full administrator access.
Hi Paul,.
Thank you very much for taking the time to answer.
The product key for Windows 8 on computers that are preloaded with are encrypted.
For more information, see the suggestions provided by Andre Da Costa of the next thread.
I wish that you contact the Asus technical support and get the recovery disk to fix the problem more far.
Please reply with the status.
-
original title: Windows error that has annoyed me for a while.
There was a problem starting
c:\user\username\appdata\local\temp\80980150.txt
The specified module could not be found.
This is the error I get whenever I boot windows and I think it may be related to a problem I was. Most of my prefrences recorded for windows is not in working condition (as my taskbar is not able to change the settings). I have scowered the interwebs for a response, even using Google and even * shudder * Bing. My Riddle has baffled many, can someone help out me?
I have consulted the temp folder and this particular text file is not present. Maybe if I create a new one, it will work? I'm not to try it again, but if someone could confirm that I would be much happier!
I don't know any reason that Windows must be looking for a text file to start. You can create a file in this location, but I think it would be better to use the free Windows Sysinternals Autoruns tool to find and remove the reference to the file.
For more information on how to use the Autoruns, please see:
Autoruns for Windows v10.01 Windows Sysinternals Autoruns Forum
Advanced Malware cleaning -
I just uploaded the site via the built in ftp upload in muse he then uploaded successfully. When I go in the edition of the browser and enter the name of the site (mernaliddawi.com) it says then this "there was a problem reading the file of Adobe Muse CC manifest for the site. Since Adobe Muse CC use file > load on the FTP host... to export the new site. ' I then exported the site again, but it still does not work also, I went my hosting provider file manager and deleted the file muse_mainfest.xml and then re uploaded still no chance. " How can I fix this thank you, james.
You need to transfer your domain to your new site. At present, the URL http://mernaliddawi.com/ is a web page that encapsulates the http://mernaliddawicom.ipage.com/ in a frameset. This isn't how a domain is successfully transferred. He doesn't bother with editing in the browser, will prevent redirection to versions Tablet and phone of your site (if you create), and can cause other problems.
If you enter mernaliddawicom.ipage.com to inbrowserediting.adobe.com it will not work, because this is the URL where your site is currently hosted.
-
"There was an error while trying to delete the snapshot"
I am running VMware Fusion on a 10.5.7 and when I try to delete the old clichés I get this error
"There was an error while trying to delete the snapshot
Impossible to clean deleted files:
The specified virtual disk needs to be repaired.
It's the performance of FreeBSD. The server has no harm actually run but gets big enough and I would like to clean it up a bit. Any suggestions?
Thank you very much
MacGruder says:
I am running VMware Fusion on a 10.5.7 and when I try to delete the old clichés I get this error
"There was an error while trying to delete the snapshot
Impossible to clean deleted files:
The specified virtual disk needs to be repaired.
It's the performance of FreeBSD. The server has no harm actually run but gets big enough and I would like to clean it up a bit. Any suggestions?
Firstly it goes without saying, but I'll say it anyway... Always back up all of the Virtual Machine with the Virtual Machine within the OS, not suspended, and Fusion to stop closed before trying to make repairs on a virtual hard disk.
This may not work if it's the basic disk that needs to be repaired and the Virtual Machine has snapshots, but I go through it. You can try to use "/ Library/Application Support/VMware Fusion/vmware-vdiskmanager ' with the '-r' option. Note: If the basic disk do not while snapshots are at stake, because it will cause more problems so my suggestion is first try to create a new basic without snapshots disk using the information below (see another option).
Also one of the reasons to delete a snapshot may fail if there is no adequate free disk space for the operation ends so make sure you have a lot of free disk space.
Another option would be to create a new basic disk, and then use dd by using an Image of CD/DVD/ISO Linux Live in the image of the old drive so written delta in snapshots to a new basic disk.
I like to use the ISO Image of KNOPPIX_V5.1.1CD - 2007-01-04 - IN .iso to start the Virtual Machine and use dd to leave because it works well with VMware SCSI virtual hard disks.
Also in Fusion 2.x, configuration the target Virtual Machine's .vmx file must be changed manually to have the present following parameters when using Knoppix.
usb:0.deviceType = "mouse" usb:0.present = "FALSE" mouse.vusb.enable = "FALSE"
Note: The first two parameters may already exist but if the other exists and is set to true, then set it to FALSE and the third are probably already so just add it.
-
In access to AOL e-mail via the full version, I can navigate my account (old messages, new messages, spam, etc.) very well, but when I try to open an individual email, I get this error message: "there was an error while loading the message. Please try again later. »
This is identical to a problem someone else was described in another thread... Unfortunately, nothing suggested you him seemed to work. I have BEEN cheated at the opening of a file attached to an e-mail immediately before this started, so I think it's a virus or something. IN ANY CASE... I AM able to open the messages when I use the basic version of AOL. Initially, the problem seemed to be in Firefox, but I tried with Internet Explorer now also and it's the same thing, and the basic version is accessible while the full version is still blocked.
On both browsers, after the error message, I can't even click on individual posts to TRY to open another, and there are a few not-very-right boxes and the x and the things that appear on the screen that do not belong.
Please tell me that you can not do that, go away... I tried uninstalling and reinstalling... Firefox who did not. I also enjoy McAffee, and that has not changed anything.
You can do a check of malware with several digitization programs of malicious software on the Windows computer.
Please scan with all programs, because each program detects a different malicious program.
All of these programs have free versions.Make sure that you update each program to get the latest version of their databases before scanning.
- Malwarebytes' Anti-Malware:
http://www.Malwarebytes.org/MBAM.php - AdwCleaner:
http://www.bleepingcomputer.com/download/adwcleaner/
http://www.Softpedia.com/get/antivirus/removal-tools/AdwCleaner.shtml - SuperAntispyware:
http://www.SUPERAntiSpyware.com/ - Microsoft security scanner:
http://www.Microsoft.com/security/scanner/en-us/default.aspx - Windows Defender:
http://Windows.Microsoft.com/en-us/Windows/using-Defender - Spybot Search & Destroy:
http://www.safer-networking.org/en/index.html - Kasperky free Security Scan:
http://www.Kaspersky.com/security-scan
Alternatively, you can write a check for an infection rootkit TDSSKiller.
- Utility anti-rootkit TDSSKiller:
http://support.Kaspersky.com/5350?El=88446
See also:
- "Spyware on Windows": http://kb.mozillazine.org/Popups_not_blocked
- Malwarebytes' Anti-Malware:
-
Using Firefox 4 and Windows 7. Whenever I have to start Firefox from a shortcut to a Web site, what happens with the following error "there was a problem sending the command to the program". The requested site is loaded after that. without any problem.
If a shortcut is used while Firefox is already open the error will not occur.
For me, the problem was the FoxClock extension. Once I disabled it, the problem was gone.
Hope this helps.
Olivier
-
Lenovo U430: 'there was a problem of reset your PC"error
I'm trying to install Windows 8.1 in new U430 touch my brother. I created the recovery USB disk (formatted in FAT32). When I insert and proceed with the installation, there is only a few percent discount to zero and then says: "there was a problem of reset your PC. It does not give me information or choices other than to cancel the process.
How is - this guy did reinstall the OS after upgrade to an SSD? Everyone did encounter this problem?
When you say restore via OKR, you mean with the Virgin SSD installed, I should go to the recovery menu and update from there?
Answer: No. partitions must exist and there should be some files in the hidden OKR partitions to restore. If you need to recreate the partitions for okr work.
I don't have a way to install own OS. That is the question. I put in SSD in the other three laptops in the past and each of them allowed me to create recovery discs to reinstall a version of Windows on the new SSD factory. I find it odd that Lenovo would choose to remove this option.
Answer: The copy of the operating system factory is in a hidden partition on the hard drive. To restore or install you must run OKR via the Novo button if the BONE does not exist. Options:
1 recovery Dvd sets can be ordered from Lenovo. Just give them a call to inquire about this.
2 do the OKR USB flash drive recovery. This will recreate all partiitons including the installation of the OS program.
3 cloning the hard drive using the included DSS cloning program or by a third party program. You need to do a repair late to make the operational okr.
-
When using Autodesk Architecture 3.3 and opening a working file, I get the error error message "there was a problem sending the command to the program". What does that mean? At the same time (or nearly the same time) trying to create a pdf from a drawing file is suspended the program autodesk. These two worked before.
Hello
The question you posted would be better suited to the Forums from Autodesk. I suggest you post here for better support.
Here is a link:
-
Hello
In the last few weeks Im facing a problem when I try to open an attachment on my Windows Live Mail Im getting the following message: "there was a problem with the Windows Live Hotmail service (a matter of temporary network conectivity has nothing to do with your computer). Please try again. »
Please let me know if I have a problem with my email account.
Hello
You will need to create a post on www.windowslivehelp.com for questions and assistance in connection with the Windows Live programs and services.
In addition, take note of the error message that you are referencing, "...". "a network temporary conectivity issue has nothing to do with your computer.
-
Original title: Netflix in windows media center, connection problems
I saw disorder connect to Netflix on windows media center. I am running windows vista x 64. When I select the icon of the login screen appears, but when I try to connect it comes up with the error message "there was a problem of signing. Make sure your internet connection is working and try again. "my internet connection is fine and I can connect to http://www.Netflix.com/, so this problem should make windows media center, but I can't understand it. I have updated windows and windows media center and I'm still having this problem. Thanks in advance for any advice.
The most likely explanation is NetFlix changed something in their routine of authentication (i.e. SOAP structure or just a URL string, whatever) and who broke the Vista NetFlix WMC client. It did not affect the web interface of NetFlix because operated a NetFlix service, they were obviously aware of the change pending and adjusted their web client to use the new method.
Customer WMC NetFlix in Windows 7 (which is a new product), was probably already coded to use the new method. The client in Vista has continued to work with the old method, until NetFlix finally stop this method. Microsoft, slow to react and to assign developers to fix the Vista NetFlix WMC client missed the deadline and Vista users have been in the dark for a while.
That's pretty standard for web services that cross corporate barriers. Particularly involving slow mega-body like Microsoft. A company change a routine and the other has to play catch-up. Communication is often difficult between the divisions within a company, between companies, it is often non-existent.
The level of prissy whining in this thread was good for a laugh however. Those threatening to cancel NetFlix: rolleyes: your access was still working on their Web site. You were not without service, just, without the convenience of WMC. People grumble at Microsoft... anyone know if Microsoft was still knowledgeable of * when * NetFlix was going to turn off the old authentication? If they were told the night before (or any) "Hey let's turn off the old authentication routine" what kind of response do you expect? How long is it since the problem began, 28 days? It's actually a pretty fast for an element relatively low priority. Or it could just be that NetFlix reactivated their old methods of authentication as a temporary solution to this problem (they share a part in creation) until Microsoft can respond formally with an update.
Now if Microsoft was duly informed advanced evolution of the service, still dragged feet (quite possible) I don't give them no slack. But at the end of the day, it is always a matter of low priority. It's fixed now, be happy until the next time that Netflix change their authentication routine.
-
While from my account on my computer Win 7 Ultimate I get constantly interrupted with the following error, having appeared on the screen.
RunDll error (X) there is a problem from C:\Users\ "X" the specified Module could not be found.
I saw the file tree and (newly) noticed that there are a number of directories that show a locked state.
I tried then access these locked directories showing locked and have encountered the error
C:\Users\ (X) 'X' is not accessible, access is denied.
I then tried to change the security permissions on these locked folders... Right click... Properties... Security... Edit... User "X"... Allow check... Apply... OK.
AND yet once I met the other mistake
Error (X), there was an error applying security... An error has occurred applying security information to: C:\Users\ 'X' access denied.
So that's where I'm stuck... I get errors. I'm doing the Correct (I think) security fixes and I am met with a stonewall by the computer? I'm I have done this correctly? The computer is damaged by a virus? (I don't think), I have use controls many security I.e.... IOBIT Malware, AVG Antivirus, Rootkit, Microsoft, etc. and regular analyses. In fact I probably spend more time computer maintenance then enjoyment... :-)
Thank you all who may be able to help or know a workaround for this problem... Thanks a lot for your comments.
........ Content of the lead in double...
I already posted this Question under Security, issues of privacy and also accounts, but it seems that the error also happens with IE explore 11. The error comes back constantly, but more often in the browser.
Entitled RunDll error: there was a problem starting C:\Users\X the specified Module could not be found. Well that begins my account on my computer Win 7 Ultimate I get constantly interrupted with the following error, having appeared on the screen.
RunDll error (X) there is a problem from C:\Users\ "X" the specified Module could not be found.
I saw the file tree and (newly) noticed that there are a number of directories that show a locked state.
I tried then access these locked directories showing locked and have encountered the error
C:\Users\ (X) 'X' is not accessible, access is denied.
I then tried to change the security permissions on these locked folders... Right click... Properties... Security... Edit... User "X"... Allow check... Apply... OK.
AND yet once I met the other mistake
Error (X), there was an error applying security... An error has occurred applying security information to: C:\Users\ 'X' access denied.
So that's where I'm stuck... I get errors. I'm doing the Correct (I think) security fixes and I am met with a stonewall by the computer? I'm I have done this correctly? The computer is damaged by a virus? (I don't think), I have use controls many security I.e.... IOBIT Malware, AVG Antivirus, Rootkit, Microsoft, etc. and regular analyses. In fact I probably spend more time computer maintenance then enjoyment... :-)
Thank you all who may be able to help or know a workaround for this problem... Thanks a lot for your comments.
Hi Barry,.
Sorry for the late reply.
The Internet Explorer cannot be uninstalled. However you can disable/enable what works as the resettlement.
How to repair or reinstall Internet Explorer in Windows
https://support.Microsoft.com/en-us/KB/318378?WA=wsignin1.0
Keep us informed on the issue.
Maybe you are looking for
-
HP compac Win XP Pro Drivers nx6110 laptop-
Anyone know where I can download the above mentioned enternet controller driver? Thank you
-
How to read the memory set on FPGA in Application of the RT?
I use the NI9403 DIO module on chassis cRIO-9111 alongwith cRIO-9024 controller RT. I've defined a "Variable" (memory location) of FPGAS which would be written in FPGA VI. The result of the logic generated from the different digital inputs would be r
-
HP Pavilion g6-2227tu Notebook: RAM upgrade
My system is HP Pavilion laptop 2227tu g6. My current RAM is 4 GB. I need to run software that requires more than that. Is it possible to upgrade the memory? I can't find the maximum limit of upgradable. Thank you!!!
-
Brother printer is printing in the documents of my portrait on the side.
I'm operating W7 in Parallels and my printer prints my documents portrait side. I replaced the drivers, Hello and reinstalled Parallels. Any recommendations? Double post My printer is print my documents portrait on the side, cutting off the header
-
You are looking for a theme with dark background in file Eplorer
Hello I tried to high-contrast and Windows themes in the official website of MS windows and the third ones but you can't find what I want. My question is MS have windows 8 themes (not high contrast) with the dark grey color background of leader explo