Thick vertical black line on the entire length of the page

Similar Questions

• disorder of the copy or scan, just the shows up as vertical black lines on the page

  I have a HP Envy 120 printer all-in-one.  It prints very well.  But when I saw something to copy, it's just all black vertical lines.  No light in the scan bar.  I had HP replace my printer with a new printer and the same thing happens.  Anyone have any ideas?  I have a laptop with Windows 7.  Have used the printer for 5 or 6 months, but use only a few times a month, so did not notice a problem immediately the Copier.  Spent 4 hours on the phone with technical support who said first the version of the firmware to put up-to-date, but he was able to complete correctly.  He suggested that I had a surge in my wall connection, but that wouldn't make much sense given that I had just plugged the new printer to try and nothing else on this decision was having problems...

  Hi teropt. Reset of the printer and plug it directly into a wall outlet are a very important step to do if you do not have.

  This document covers troubleshooting for "Copies or Scans have vertical strips of black Pages or lines:
  http://support.HP.com/us-en/document/c03733649

• Dell Inspiron 15: Vertical black line on the screen.

  Dell Inspiron 15 , I bought about 8 months ago. The specs are as under: -.
  Intel Core i3 3217U clocked at 1.8 Ghz
  4 GB RAM DDR3
  1 GB Intel HD 4000
  1 GB AMD 7670 M (switchable)
  500 GB HARD DRIVE AT 5400 RPM
  Windows 8 Core 64-bit Edition

  The laptop was working absolutely fine with no problems until yesterday. Today morning when I turned on the laptop, I noticed a vertical black line on the desktop with an endpoint at the end of the line on my screen. At first I thought it would be a graphic bug which would disappear on reboot, done repeatedly, but no avail. The black line is more noticeable on a light background.

  Laptop has not been submitted to harsh handling or stress. What could be the cause of it? Is it a manufacturing fault or something else?

  I am attaching 2 photos of the screen from different angles to obtain a correct and complete line. Please tell me how should I proceed from here.

  

  

  Contact Dell for a replacement of the LCD warranty.

• Black lines across the page

  Each page that print includes a greyish black line.  How can I eliminate this line?

  Hi BlueEyedPea,

  Your printer would require an intervention... If you get the patches even a photocopy of his problem with the printer... You can try to clean the cartridge of the printer and see if it solves your problem else, you need to get in touch with your retailer of printer...

  Remove the cartridge and try clean and then align.

  Check out: http://support.dell.com/support/edocs/systems/prn942/en/om/942_om_en.pdf on how to align the cartridge.

  I hope this helps.

• Black lines on the right side of the printed document Hp 8600 N911g

  I have problems with my HP 8600N911g.  I have several vertical black lines on the printed page of right hand margin.  This only happens when I copy or scan. Printing from my pc is fine.  I did all the cleaning, cutting for over an hour and reset to factory default.  NOTHING WORKS.  Help, please.  I love the printer hp but tire of their problems, which are few, but when they occur, they are doozies.

  I am on Windows 7

  Hi peggymay.

  Welcome to the HP Forums, I hope you enjoy your experience! To help you get the most out of the Forums of HP, I would like to draw your attention to the Guide of the Forums HP first time here? Learn how to publish and more.

  Sorry to hear that you are having problems with black lines on your scans or copies.  I had this problem myself on my 8600 very clean and I was able to get it to be resolved. The question arises in fact from two locations and with a little luck, we can get this problem solved for you. First thing to look at is under the hood of the scanner. Lift the cover on the left of the large scanner glass and scanner, you will see a small strip of glass. Take a glass clear cleaner and a lint cloth and clean the small glass placed as well as the large glass. On the underside of the lid, you will see a white plastic strip. Please clean it as well. IF you have already done these steps please proceed to the next step.

  The printer power cable must be connected to a wall outlet and NOT a power strip/Bar. HP printers have built in surge protector and if you have it plugged into a strip/Bar, the printer will NOT get all the power needed for the proper functioning and it will cause problems with scans or copies, and it might even generate false error messages on the printer screen.

  Please try these steps and if they work, fantastic. But if they are not, please do not hesitate to write me again.

  I thank very you much for your time.  Always happy to help.

• 7520 all-in-one offers unique vertical black line

  My 7520 puts a single vertical black line in the middle of the page when I scan or copy from the document feeder.  I tried to reset by unplugging the power supply, and I cleaned the glass.  What should I try next?

  Hi mmvegas,

  Try to copy blank pages 3 to 5 to see if it's a stuck there small dust particle.

  It could also be something on the Jack roller: http://support.hp.com/us-en/document/c02881567

  1. Remove all documents from the ADF tray.

• How to remove a black line between the two parts of the scanned image?

  Hello

  I scanned a drawing I did a long time ago.

  But given that the paper is too large for the scanner, I had to do two scanning. I wanted to join these two parts as in Photoshop.

  I loaded the left side of the drawing.

  I changed the size of the canva so the second part could be put there.

  I loaded the part right of the drawing and copied and paste it on the canva of the left side of the drawing.

  But whatever I do, I can see a vertical black line where the left and right hand reach. On the contrary, where the right side starts, it seems.

  Could someone tell me (or direct me to a tutorial that tells about) what to do in this case?

  Thanks in advance for your answers.

  This isn't under file, Scripts, but under file, PLC.

• Incoming Fax page, left thick black line down the side edge

  Hello

  I recently bought a HP Photosmart 7520 printer and had to return because of a wrong switch ON / OFF the printer.  So I returned and bought another. This second printer works perfectly so far!  However, when I recieive a fax, the page has a very thick Black Line crosses the length (less than an inch from top and down) on the left edge. It almost seems to be a template for a fax page?  The first printer (a returned) did not do that, but it does not appear on the second printer.  In addition, the original page fax I sent to my friend and he said, that it doesn't have a thick black line on the fax page, he gets... and then he sent me along a return fax with this black line appears.

  Comment of thoughts,

  SyBerGuy

  Hello

  For more than a week since my last post. And I also had the printer connected to an outlet of power strip surge protector (never needed to connect directly to a wall, which I would have if I had a problem).  The problem has been resolved by replacing the large black ink cartridge, which was not printing text.

  In addition, earlier when I check the ink level, he showed the graphics still about 1/4 rest in the cartridge. I had also previously clicked on tell me when the ink level is low. None of this happened?  So now I have to watch closely what is printing a page of text clean/good.

  So for now, the printer is good to go and I hope not to have more problems... thank you for your help!

  Sy

• OfficeJet pro 8600 print a single vertical black line when using the charger

  OfficeJet pro 8600 print a single vertical black line when using the charger

  Hi @realestatejeann,

  I see that you have found one black vertical line when using the ADF. With a few steps, we should be able to solve this problem.

  Make sure that the printer is connected directly to a wall outlet. (do not use a hub or a surge protector) This ensures that the printer is full on and can help this situation.

  Here is a document for the cleaning of the glass Strip and the underside of the scanner cover.

  Vertical stripes, lines or streaks on Copies, faxes or scans.

  If you need help, let me know.

  Good day!
  Thank you.

• How to get rid of the black lines on the printed and scanned documents

  When I print, copy or scan on my officeject 6500 wireless I get a black line to the bottom of the page.

  While I wait for your answer, I'll post the most likely cause:

  Lift off the cover.  Now lift the document feeder cover, it opens to the left. You will see the mech feeder, you want to raise that to the left as well, it will increase by 2 inches or more. See this article from underneather glass it? Clean it. Really good.

  Then see you the white piece of plastic above the glass, which clean really good too.

  If it is a perfectly vertical line, in that it's probably caused by some dirt here, what is happening is the seat of bulb scanner in one place, the paper is then slipped over in the same place. If there is a grain of dust, it covers the entire page, top down. You clean the white room because there might be dirt there, when the bulb shines through the paper, he thinks returned as a dark spot.

• Vertical black line on Portege 3500

  My P3500 screen suddenly started showing a vertical black line with interference on the right hand third of the monitor. The line disappears after about 15 minutes, but still the interference. I plugged an external display that shows no display problem.

  Hello

  If the monitor external don t show any problem, to certainly show a malfunction. Try contacting the Service of your country partner. Explain exactly what is happening. I'm sure they will know immediately what the problem is.

• All-in-one Officejet 4630: black lines at the copy and acanning

  Hello... I just bought this all-in-one today, and it is printing very well.  The problem is with the copy and scan.  No matter if I place the original on the scanner or the top of the page, the result is the same... sheet is covered with black lines of variable thickness, running up and down the page, while the details of the actual document are barely visible underneath (or colored lines if I select color printing).

  Not an expert tech by any means, so hard to solve this problem.  Have re-installed... rebooted the printer cartridges... try to print with a cartridge installed... nothing work so far.

  Any help or advice is welcome and appreciated!

  Hi @D_Corbs ,

  I see you got black lines during the scanning of the bucket and the ADF. I can help you with this.

  I would like to do a hard reset to see if that will solve the problem.
  Let the printer and disconnect the printer cable and the wall socket for 60 seconds.
  Reconnect the power cable to the output of the printer and the wall, and not a surge protector.
  This ensures that the printer is full on and can help this situation.

  If the problem persists, please update the firmware of the printer. E-all-in-one printer drivers HP Officejet 4630.

  If the problem persists, in 800-474-6836, please call our technical support. If you do not live in the United States / Canada region, please click the link below to get help from your region number.
  Contact HP.

  Have a wonderful day!
  Thank you.

• 6500 a black line on the right side when I copy

  I have printer hp 6500 has only when I copy I have a black line on the full length of right on the paper even when I copy a blank sheet

  Hi danpk,

  I understand that you are having problems when you perform a copy.  I'll take a look at the document below.

  Copy quality

  Let me know how it goes.

• HP Officejet 6500 Wireless-black line down the copied sheet

  With the help of HP Officejet 6500 (E709n). When the automatic document feeder, copying copies resulting dating a (thin) continuous black line from the top of the sheet for any length, to 1 3/8 "from the left edge of the worksheet. Line does not appear when you copy directly from glass. Am not able to determine a way to access a possible source of problem (most likely a dirty friction roller). The original user manuals do not address this problem. Search for a solution. Thank you

  Hello lentill24.

  Please, see this document.

  http://support.HP.com/us-en/document/c01612462

  See you soon!

• HP Office Jet Pro 8600 - vertical black lines printing

  My printer just started printing black vertical lines across the page today.  It happens that I have copy or scan.  Does not seem to happen when I print only.

  Thanks for the link to the HP support center.  After crossing the "discoverable" mode, etc and read its documents, the first suggestion for this problem was "with the printer, unplug the power cord from the printer" to reset the printer.  This seemed to solve the problem.

  Thanks again for linking me to an area that I could get a resolution.  I can continue to work now!