ThinApp Capture fails with file system tool virtual "Build Fail" has stopped working

Hi people,


Anyone know the cause of what I have this on many applications try to build the project.

Win7 x 86 package clean.  Thought it might be the file names long so I did Capture a local folder on the root of C: Notthing fancy here capture the basic machine...

Any help, I would be happy I'm getting thin work me on it for a dau or...

At soon Norm

... just remove *.debug files in the... Directory of Gimp\lib\gimp\2.0\python\ and the construction!

Tags: VMware

Similar Questions

  • When I try to open the games on my Windows 7 system, I get the executable file to the games error message has stopped working.

    When I try to open the games on my Windows 7 system, I get the executable file to the games error message has stopped working. I tried several times to load the games following the indications for help but the games is not accessible. My computer is a remanufactured unit that was on the lease are there steps I can take to solve problems?  Thank you

    Original title: frustrated in New York

    The problem seems to be the igdumd64.dll:

    Fault Module name: igdumd64.dll
    Fault Module Version: 8.15.10.1749
    Timestamp of Module error: 4a5bdf54

    The igdumd64.dll is a component of the Intel graphics driver and seems to be an older version then try to update the graphic driver Intel.

    You could try the manufacturer of the computer for an updated driver, or use the following utility for intel to check a generic version:

    http://www.Intel.com/p/en_US/support/detect

  • Hardware diagnostic tools error pcdrsinfosystemboard.p5x has stopped working

    pcdrsinfosystemboard.p5x has stopped working message each time I have start hardware diagnostic tools in vista Home premium on hp Pavilion slimline s3700y pc

    My hardware diagnostic tools came pre-installed on my pc when I bought it. I didn't uninstall with revo uninstaller to get rid of all the remains and re-installed using the Recovery Manager. It has been fine since. I hope this helps someone in the future, which could run into this same problem. Thank you for asking. I always wanted to help out where I can in the field of computers, I get so much help from others.

  • Cannot run Lenovo System Update error tvsu.exe has stopped working

    Original title: tvsu.exe has stopped working

    When I run it on my WIn7 64 bit notebook Lenovo System Update v4, I get the following:

    TVSU Application has stopped working

    A problem caused the blocking of the program works correctly. Windows will close the program and notify you if a solution is available.

    I called Lenovo and they say it's a Windows problem. This message looks like a standard message for a particular type of problem. Ideas for a solution?
    Thank you

    Thanks, Eddie!

    I've been reluctant to use these registry cleaners too but had no choice. They well with basic cleaning after uninstall. It is heartbreaking how reckless SSII is during the cleaning of the registry during the uninstallation of their software. And some of the best cleansers will warn you if a fix is dangerous or not you can not run it. But what sometimes happens is that vacuuming can cause two problems for everyone that it fixes if you aren't careful.

    I'll try to post on the site you posted. I'll post here if it helps.

  • System tray CP1025nw HP LaserJet has stopped working

    I bought this printer about a month ago and a week ago I started having error

    "HPCP1020SM.exe (64-bit) has stopped working." then click on close and then

    "HP system status bar stopped working." appears click Close. the printer will always print but these mistakes continue to flock to the top whenever I print.  I called HP support, but they have no idea.  Thank you for anyone who can help.

    Hi leutzu_mik,

    Follow the steps below to uninstall and reinstall the printer. If you are unable to get the printer installed on this computer to try to install on another computer and let me know if you encounter the same problems?

    1. open Control Panel

    2. click on uninstall a program

    3 uninstall the Laserjet CP1025 in the list

    4 restart your computer

    5. download and install the latest version of Adobe flash player

    http://www.Adobe.com/support/flashplayer/downloads.html

    6 download the basic driver, and then reinstall the printer.

    HP LaserJet Basic driver

  • Address a problem with your LOCAL WIFI card__Your network card has stopped working properly .___To find out if a version update of your wireless network card is available, contact the manufacturer of your device or computer. __ __

     

    A problem with your wireless network card

    Your wireless card has stopped working properly.

    To see if an updated version of your WLAN card is available

    Hello Jeroen Ratz,

    You should visit your computer manufacturer's website to download all updates for your hardware. Never leave the windows update utility, update your hardware to your computer. Hope this helps you. Let us know anyway. Make it a great day!

    "And in the end the love you take, is equal to The Love You Make" (The Beatles last song from their latest album, Abbey Road.)

  • Why my computer keep stop inadvertently with this message: address a problem with the NVIDIA Graphics Driver__NVIDIA graphics driver has stopped working properly. ? __

    Recently my computer (laptop) was stopped when I put the command "sleep".  It displays a message about my NVIDIA Graphics Driver does not. I have check the driver to use and it shows like th emost current and NVIDIA hardware works correctly... who is not lying.

    A recent Microsoft update would be the cause of this problem suddenly?

    Try a system restore to a Date before the problem began:

    Restore point:

    http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

    Do Safe Mode system restore, if it is impossible to do in Normal Mode.

    Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

    Try a restore of the system once, to choose a Restore Point prior to your problem...

    Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

    http://www.windowsvistauserguide.com/system_restore.htm

    Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

    ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

    http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.HTML?filter [11] = power % 20Management

    Read the info on sleep disorders in the tutorial above.

    http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

    Also read this tutorial; as well as the 'related links' at the bottom of the links above.

    See you soon.

    Mick Murphy - Microsoft partner

  • I have 2 Gmail accounts that I use Thunderbird to work with. Suddenly, one of the accounts has stopped working (password requests).

    For a year I used without problem Thunderbird to work with two of my Gmail accounts without problems.
    I had been on a long trip for the last 2 weeks had not begun to Thunderbird. When I did it for the first time this morning, I couldn't work or another account with it.

    Reset, return all settings solved the problem for ONE of my accounts (the main!), but the other continues to refuse to work.
    Yes, I have IMAP and less secure device permissions enabled in the Gmail settings. I changed my passwords and their update on all ends and again, my main account works, but the other refuses to accept passwords, even though I know they are correct.

    I still get the "cannot connect to server imap.gmail.com ." Message and I am prompted for my password.

    No luck.

    Could someone help me novel?

    Thank you very much,

    Zea

    After digging around a few others, I finally managed to find the google site:

    https://support.Google.com/accounts/answer/6009563

    There is a link on the bottom, saying: "allow access". Click on this one, 'continue' and directly there after prompt to synchronize Thunderbird. That solved the problem.

    Synchronize Thunderbird now until my two accounts again.

    Thanks for all the help and all the world looking in there, I hope this helps the other 3 who clicked on they have the same problem.

    PS: In your web browser, you must be connected to the Google account with disorders!

  • Dell Latitude d630 with Windows 7 edition integral-DVD drive has stopped working.

    On the Dell website, they don't support my laptop for Windows Vista and XP. Can anyone help?

    Hello

    ·         Since when you are facing this problem?

    ·         Did you change your computer before this problem?

    I suggest you to check first if the DVD Rom is detected in the Explorer or not.

    If this isn't the case, then I suggest you to run the fixit of the article below and check if that helps.

    http://support.Microsoft.com/kb/982116

    I also suggest you to run the fixit of the article below and check if it helps.

    http://support.Microsoft.com/mats/cd_dvd_drive_problems/en-us

  • Use high CPU (35% average) while System Idle process CPU about 98% but frustrated by "[name of the prog] has stopped working".

    Hello

    I am trying to help someone with a laptop HP model g6-1202sa (Windows 7 Home Premium 64 - bit, another record at the end of the post).

    I think that Windows is now updated and drivers, but the problem remains also.

    The laptop has the symptoms mentioned in the title I found the Manager tasks.  Laptop fan is on a large part of the time, and the owner says that, during the execution of something more intensive than Skype for example of internet browsing, they get a warning from Norton on high CPU. Resource monitor shows that system interrupts are on average about 31% CPU.

    The results, I found the task manager has led to some research on Google, which in turn led me to want to run adksetup.exe (Windows Assessment and Deployment Kit) in the hope of discovering if a particular driver is causing the problem. (Various threads on the internet point to what is the way to go).

    However, after downloading adksetup.exe, when I try to launch it I get the initial screen of Toolbox and then 'assessment of Windows and the deployment for Windows 8.1 Kit has stopped working ". (Verification of the solution finally gives the only option to "Close the program").  Similarly, I have now discovered that if I try to look at the properties of the computer, i.e. start > right click on computer > left click on properties, I get "Windows Explorer has stopped working". Do more research on Google I find sometimes I get "Internet Explorer has stopped working" sometimes (Chrome is ok).  More out of curiosity than anything specific I ran AMD VISION Engine Control Center after right click on the desktop and ended with 'Catalyst Control Center; The host Application has stopped working".

    So before going any further, does anyone have any ideas what's happening?   I do not understand the problems 'has stopped working"in safe mode, but the high utilization of the processor with System Idle Process around 98% is still there.  It appears so that I can run adksetup.exe in safe mode while this would be the way to proceed and continue to try to tackle the problem of CPU?

    For the record, some of the things I've done along the way include update of Windows, updating drivers, running the file system (no violation of integrity) checker, a regular chkdsk ("CHKDSK discovered free space marked allocated in the master file table (MFT) bitmap. Correcting errors in the volume bitmap. Windows has made corrections to the file system").  Swapped the only module memory 4GB 2 x 1 GB modules I had to hang out, all the symptoms remained 4 GB then reinstalled.

    Thanks for the tips

    HP g6-1202sa Windows 7 Home Premium 64-bit

    4 GB of ram

    AMD A4 - 3300M APU with graphics Radeon (TM) HD 1900 MHz

    523 GB of free disk space

    WE

    Since the observer event logs, these are some of the problems

    Software connection of 1 hp mgr is damaged and needs to be installed.  There are literally hundreds (or even thousands of these errors)

    Cannot find the description for the ID of the event source hpCMSrv 5. Either the component that triggers this event is not installed on your local computer or the installation is corrupted. You can install or repair the component on the local computer.

    The failing application name: hpConnectionManager.exe, version: 4.1.23.1, time stamp: 0x4df7dbef

    2 - the description for event ID 0 in source AdvancedSystemCareService8 is not found. Remove

    3 - Media center is corrupt (updated)

    The description for event ID 0 in source MCUpdate is not found. Either the component that triggers this event is not installed on your local computer or the installation is corrupted.

    Workouts 4 - sky are corupt

    Session "SkyDriveSessionName" was able to start with the following error: 0xC0000022

    5 - the description for the ID of the event source BtFilter 26 is not found

    6 - hundreds of Cvhsvc.exe is a part of the virtualization Client Microsoft Microsoft Office Service... Errors

    The description for event ID 100 from source CVHSVC is not found.

    7. the description of event ID 3057 source client Application Virtualization Client cannot be found.

    As you can see there are at least a dozen of them which are probably related to the high utilization of the processor.

    The drivers are not updated (Bet you checked in the Manager device or with a sweeper driver as app)

    To be honest I don't see how SFC returned no breach of integrity account required to this type of problems.

    It might just be easier to re - install win 7, but I'm happy to help anyway

  • Windows Explorer has stopped working, trying to open the video files

    No matter what program I open video files in I get "Windows Explorer has stopped working" before I can even open videos is not question, what type, program, video file corresponding to this error occurs, I tried WMP11, media player classic homecinema & Media Player VLC, how do I prevent this, I get a bit bored my video files because this error guard prevents me to open one of them

    First to perform a clean boot like diana D asked! because there may be several services running the background to avoid the evil funtion windows

  • System hangs and displays that Windows has stopped working with a dialog 'extended attributes are incompatible. "

    original title: Mr

    Since the installation of Spyware Doctor, I've known crashes & Windows problem report has stopped working.

    and a dialog box "extended attributes are incompatible."

    I can't access features, etc., programs and support, help window. Y at - it an easy fix or should I

    request Spyware Doctor? Also cannot access the microsoft games.

    Robarm

    Hello

    try a system restore before the installation of spyware doctor

    http://www.windowsvistauserguide.com/system_restore.htm

    If necessary do in safe mode

    Windows Vista

    Using the F8 method:

    1. Restart your computer.
    2. When the computer starts, you will see your computer hardware are listed. When you see this information begins to tap theF8 key repeatedly until you are presented with theBoot Options Advanced Windows Vista.
    3. Select the Safe Mode option with the arrow keys.
    4. Then press enter on your keyboard to start mode without failure of Vista.
    5. To start Windows, you'll be a typical logon screen. Connect to your computer and Vista goes into safe mode.
    6. Do whatever tasks you need and when you are done, reboot to return to normal mode.

    also run the sfc/scannow command.

    http://support.Microsoft.com/kb/929833

    Use the (SFC.exe) System File Checker tool to determine which file is causing the problem and then replace the file. To do this, follow these steps:

    1. Open an elevated command prompt. To do this, click Start, click principally madeprograms,Accessories, right-clickguest, and then clickrun as administrator. If you are prompted for an administrator password or a confirmation, type the password, or clickallow.
    2. Type the following command and press ENTER:
      sfc/scannow

      The sfc/scannow command analyzes all protected system files and replaces incorrect versions with appropriate Microsoft versions

  • Photoshop CS3 does not start with popup indicating that "licensing for this product has stopped working" I tried uninstalling and reinstalling 3 times, including after you run CCCleaner tool.  Any help would be appreciated?

    Photoshop CS3 does not start with popup indicating that "licensing for this product has stopped working" I tried uninstalling and reinstalling 3 times, including after you run CCCleaner tool.  Any help would be appreciated?

    Same fixed.  At executed license repair tool, Adobe - Adobe licensing repair tool, and it fixed the problem.

  • Explorer Windows has stopped working when I right click on the files

    When I need to click with the right button on folders, windows Explorer has stopped working.

    up to now, still can't use the right click menu ~.

    Yes, it's the details of the problem.

    Unfortunately, it does not identify the failing module.

    At this point, it may be useful to try to capture a dump of user of the explorer.exe crash mode.

    You can configure Windows to create dumps of user mode. First, create a System Restore Point.

    If you copy and paste the following text in Notepad and save it as a .reg file, then right click on the .reg file and select "Merge" to add to the registry, when the .dmp file explorer.exe plant should be created in the C:\CrashDumps folder:

    Windows Registry Editor Version 5.00

    [HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows\Windows error Reporting\LocalDumps\explorer.exe]
    "DumpFolder" = hex (2): 43, 00, 3A, 00, 5 c 00, 43, 00, 72, 00, 61, 00, 73, 00, 68, 00, 44, 00, 75,.
    00, 6 D, 00, 70, 00, 73, 00, 00, 00


    After Explorer (explorer.exe) crashes, you can, and then make the .dmp file available (provide the link) via Windows Live SkyDrive or similar site?

    The following link has information about the use of Windows Live SkyDrive:

    http://social.technet.Microsoft.com/forums/en-us/w7itproui/thread/4fc10639-02dB-4665-993a-08d865088d65

    More information on the collection of user-mode dumps:

    ("msdn.microsoft.com/en-us/library··· .a 85)

    You can also try to use ShellExView, as suggested by BurrWalnut, to try to eliminate a problematic third-party shell extension.

  • Can Hi anyone please help? I want to subscribe to phtoshopCC so I decided to download the free trial version first, but I downloaded it, but when I open it a sign comes up saying that photoshopcc has stopped working. My computer is compatible with the sys

    Can Hi anyone please help? I want to subscribe to PhotoshopCC, I decided to download the free trial version first. I downloaded it, but when I open it a few seconds see a sign indicating photoshopcc has stopped working. My cell phone is compatible with the programme but I only 1.80 ghz is this a problem? I saw that you have 2.0 ghz to run the program, but people have told me that it should work on my laptop?

    hiughkhk, I assume you are using windows 7 or newer.

    Navigate to C:\Program Files\Adobe\Adobe Photoshop CC 2014 - location of the folder in your computer and delete the file named "sniffer" and try to launch the Photoshop CC 2014.

    If you are still having the same problem, please provide newspapers in the event viewer for Photoshop.

    Please use the link on how to view the event logs in the observer of events below.

    http://support.Microsoft.com/kb/308427

    Control Panel > system and security > administrative tools > event viewer > expand windows Logs > Application > search for error or red for the failed module.

    Thank you

Maybe you are looking for