ThinApped application requiring a mounted network drive and get "Unable to connect to the sharedDbLibrary" when the application is running on W7 and the drive is mounted

We have an application that needs to have a specific network drive, mounted with a the letter I:\. This support allows the application to access some of the files that must be available for the application to run.

If the I: drive is not mounted then the application will not work and you get the following message if displays the runtime "Impossible to connect to the sharedDbLibrary.".

We have the application on an XPSP3 box thinapped and everything works fine as long as the drive is mounted.

The ultimate goal is to have the application thinapp running on a workstation of W7.

We have mounted drive I:\ on a post of W7 and ran the thinapp app by making the same error message that allows us to obtain under XP as drive I:\ was not mounted "impossible to connect to the sharedDbLibrary".

We checked that the drive I:\ is accessible and we also validated that the path is good. We were able to reproduce the problem in a Windows 2008 box, as well on the other hand the thinapp works fine on a Windows 2003 operating system.

So basically with the drive I:\ mounted on XP and Windows 2003 the app big short thinapp. With the same drive I:\ mounted on W7 and W2008 application does not run and we get the same message that allows us to get on WXP and W2k3 when drive I:\ was not mounted and the app couldn't find the mapped drive.

Anyone know how to start to solve this problem?

Have you had a look at this blog post? http://blogs.VMware.com/ThinApp/2011/04/making-Windows-XP-only-apps-run-on-Windows-7.html

It might help you to add necessary dll and get the app runs on Win7.

Tags: VMware

Similar Questions

  • No network adapter driver is available after reinstalling Windows Vista installation disk... Unable to connect to the network

    No network adapter driver is available after reinstalling Windows Vista installation disk... Unable to connect to the network

    Hello

    Know what type of network card you have and download the drivers of its supplier.

    It doesn't matter what it is always a good idea before re-install/upgrade to log on to the computer support page, download independent drivers from there and put them on a flash drive.

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • When I use the Client for NFS provided by Windows 7, I'm unable to connect. The "mount \\ip address\share Z:" command fails with the error code "the path not found network".

    Identification of customer's Windows 7 NFS UID GID information

    I am trying to connect to the Windows 7 Client NFS on a server running on a computer (VxWorks) NFS.  I am able to properly connect Client NFS software by a 3rd party on the NFS server.  However, when I use the Client for NFS provided by Windows 7, I am unable to connect.  The \\ip address\share Z: mount"command fails with the error code"the path not found network ".  I can't do a ping of the computer running the NFS server.

    The NFS Client operating system: Windows 7 Ultimate, 64-bit

    Data captured by Wireshark

    MOUNT V1 EXPORT call 3rd party client
    Identification information Flavor: AUTH_UNIX (1)
    Length: 32
    Stamp: 0xc7065970

    Machine name: PC
    UID: 1000
    GID: 1000

    MOUNT V1 EXPORT appeal of the NFS client
    Identification information Flavor: AUTH_NULL (0)
    Length: 0

    It seems that the credentials of NFS Client are not correct.  How can I change the flavor of AUTH_UNIX and the UID and GID to 1000?

    Hello VDAEMP,

    As Eddie and Sudarshan has said, the Microsoft Answers community focuses on issues and problems related to the consumer environment. Please join the public IT pro TechNet forums below:
    TechNet - Windows Server
     
    Thank you

  • I could not update or install applications for weeks, so I disconnected my Apple ID and rebooted the phone but now I can't reconnect! The error is: unable to connect to the iTunes Store. I should w8 for ios10 and hope that it will be fixed by the new ios?

    I could not update or install applications for weeks, so I disconnected my Apple ID and rebooted the phone but now I can't reconnect! The error is: unable to connect to the iTunes Store. I should w8 for ios10 and hope that it will be fixed by the new ios? Cause don't want to reset my phone.

    You have tried: If you can not connect to the iTunes Store - Apple Support ?

    And I tried to do a soft-reset/reboot the phone?

  • Unable to connect to the website of 'http', steam and App Store

    I use a Macbook Pro 13 inch, mid-2012 with OSX Yosemite 10.10.5. I had a problem with my network which I cannot connect to the 'http' site in Google Chrome or Safari. It shows ' site is not reachable, refused to sign, ERR_CONNECTION_REFUSED '. In addition, I can not connect to Steam and it shows 'code error - 102, unable to connect to the server. "Server may be offline or you cannot be connected to the internet". I can access the App Store, but most of the app doesn't load the image, and it seems weird that I cannot install or update applications from the App Store. It is said "we could complete the purchase. Cannot connect to the server'. Finally, I can connect to the Web site "https" as google.com, facebook.com, youtube.com, and apple.com. I don't know what I was doing before that happens because I'm not all of the firewall settings or IP network since I bought it. I don't even no matter what antivirus installed on my macbook. I do not think that the problem of my wifi because it works fine on my other devices. I try to fix but still have no luck.

    Here what I was trying to fix my problem:

    1. I try to restart the computer, then reconnect to my wifi - nothing fixed

    2. I have try to change the DNS 8.8.8.8 and 8.8.4.4 - still not fixed, worse still, unable to connect all Web sites

    3. I try to delete the Library/Preferences/SystemConfiguration folder and restart the computer - nothing has changed

    4. I try to start safe mode and it works very well and when I reboot to normal, it still happens

    5. I try to remove and re-add the Chrome in the firewall settings to allow incoming connections - nothing fixed

    6. I try to delete all the data navigation and cookies in Chrome and Safari - still not fixed

    7. I try to plug in the ethernet cable, as a first step, it works very well. Then, when I disconnected and reconnected again for the second time, and then he had the same problems.

    What I saw here, I check that iTunes had recently many updates with the same version of iTunes 12.4.1 since June 4, 2016 (1 time), June 5, 2016 (1 time), June 6, 2016 (2 times), June 7, 2016 (7 times), June 8, 2016 (2 times), June 10, 2016 (9 times), June 11, 2016 (1 time) and June 12, 2016 (1 hour). I don't know if this is normal or not because he had to download and installed about 24 times with the same versions! It is possible that iTunes is the cause of this problem? Any help and suggestions that can solve my problem? Thanks in advance!

    Is your date and time is set correctly? 5 minutes from the perfect?

  • Satellite L650 - unable to connect to the public network (has no valid IP address)

    Hello

    Toshiba satellite L650 laptop computer (with windows 7 64-bit), I bought two days back and I'm unable to connect to the public network. Sometimes, it must be connected to the public network and after a few minutes it disconnects. I get the message "wireless network doesn't have a valid IP configuration him."

    I have visited many forums and did everything, but of no use.

    1. people with disabilities the tcp/ip V6 of the registry.
    2. the DHCP is enabled. With the help of the automatic IP (DHCP)
    3. also tried with a static IP configuration.
    4. uninstalled the antivirus provided with laptop computer (Norton).
    5 disabled the windows firewall.
    6. restored to factory settings.

    I called Toshiba Tech support as well and they have suggested that it may be a problem of H/W but I don't think that so that it can be hardware problem because sometimes he must be connected to the public network. Now I'm left with no option except return the laptop to Toshiba (I'm less interested in this because I know that sending laptop for replacement will be more frustrating).

    Can someone please give some other suggestions for this problem?

    Hey,.

    Can you connect to your home WIFI router correctly?

    If you have problems with the public network connection, you should ask the owner of these networks. Usually, there is always a contact, you can ask if you have any problems with the connection.

    What you can try is updated WLAN driver from Toshiba's official website:
    http://APS2.toshiba-tro.de/WLAN/

    If it doesn't work, ask the person contact I mentioned.

  • Reinstalled XP and now unable to connect to the internet, dsl provider says the leaves to reinstall the connection LAN how fix this?

    Original title: windows xp.

    reinstalled xp and now unable to connect to the internet, dsl provider says the leaves to reinstall the connection LAN how fix this?

    Hello

    Go to the website of your computer manufacturer > drivers download Section > put your computer model number > operating system > Search adapter network, pilots etc. for her.

    Get graphics, sound while you're there.

    You should always do a reinstallation.

    Use the computer that you use to make the foregoing > download and save in this office > copy of Flash Drive > then install in another computer.

    See you soon.

  • Error message: "unable to connect to the RPC Server" and no internet connection.

    Original title: recently installed a program of pc cleaner. Seemed to really speed up my laptop that is running Windows XP.

    After two days I try to connect to the internet and no connection lie. Uninstalled the pc cleaner without problem but the problem continues to exist. All tests, etc., result in "unable to connect to the RPC server. Slide short drive and reinstall XP, are there any other things to try?

    Hi Wantamustang,

    You can try the following steps and check.

    You can set the remote procedure (RPC) call Service to start automatically:

    a. clickStart, point to settings, clickControl Paneland then double-clickServices.

    b. in theservices list, click the remote procedure (RPC) call Serviceand then clickStartup.

    c. underStartup Type, click Automaticand then click OK.

    d. restart your computer.

    You can also consult the following article:

    Windows wireless and wired network connection problems

  • Unable to connect to the network "\\localmachine\sharedname" share

    I use VMware vCenter Converter Standalone client, v5.0.0 build-470252, running on a 64-bit Windows 7 computer, try to import a Windows 2008 computer virtual (hosted by VMWare infrastructure) on my local machine.

    At the start of the converter, I have "connecting to a local server.

    Specification of the source system is OK, even if I don't know the certificate error.  The conversion wizard installs his agent and it connects OK.

    To the Destination System, I said:


    Type of destination: VMware Workstation or other virtual machines to VMware
    Product VMware: VMware Workstation 8.0.x
    Information on the virtual machine:
    Name: same as the source system, such as detected by the converter
    Location for the virtual machine: \\localmachine\sharedfoldername
    Username and password: my Windows 7 credentials, with full control over \\localmachine\sharedfoldername, the action and the underlying folder.

    "When the converter checks the destination settings, it is reported: unable to connect to the network"\\localmachine\sharedfoldername"share

    So far the measures of investigation:
    -Connection to the share through Windows Explorer works fine; It is possible to write to the share

    -J' tried specifying the share as '\\localhost\sharedfoldername', but get "the share specified network 'localhost\sharedfoldername' does not exist."  It was a bit of a long shot, I guess, but the form does not work in Windows Explorer.

    -Have you tried with the file and print sharing both power - on and off seemed worth a try after looking at other posts on this forum

    The help says 'If you are connected to a local Converter Standalone Server, providing a network path or a local path to the destination directory'.  I tried the local path "C:\Virtual Machines\sharedfoldername", but got the message "error: specified as a (local) drive Destination.»  "Please specify a UNC path such as: \\machine\sharename.

    Aid also States "You have not to provide user credentials if the location is on the local storage of the machine where Converter Standalone server running."  However, the next button is always disabled until credentials are provided.

    Can anyone help please?

    You must be able to access the \\localmachine\sharedname of the * SOURCE * machine. The job of conversions P2V of Windows is to install an agent on the source, then the agent connects to the target (this is why it must be on a network share) and transfers the data. You can browse \\localmachine\sharedname of the source (but not where the converter is installed)?

  • Unable to connect to the internet by cable sony bdp s490 network

    I have sony bdp s490 bluray player iam unable to connect to the internet by cable network

    my internet broadband requires the user name and password when using on the pc where should I apply the username and password when the internet connection for Blu - Ray player


  • Unable to connect to the App Store and auto delete app

    Hi, I never update my ipad because I never, and I do not have the space for it anyway. Now and then I get the message saying ipad needs space for the update, press ok to allow deletion, or something in that sense. Theres two options cancel or ok. Today I accidentally pressed ok. He deleted my largest app and now I am having problems with the App Store. I can open it and see the recommended page. I think I can upload them as well, but when I use the search bar, it says unable to connect to the App Store. I don't know what to do and how to cancel.

    First of all, make sure that you don't have enough free space before trying to re-download the application. Once you know that you have enough space, try these two ways to get to the app.

    Click on the tab purchased on the App Store and see if the application appears in a search here or just trying to slide through until you see the app and then download it from there.

    If this does not work, do a Google search for the app. It should appear in the search. Tap on the app in the Google search and who should open the description window app on the App Store with the download next to the app icon.

  • Satellite Pro A10 - WXP re-installed and unable to connect to the internet

    Please help me... I have re-installed Windows XP Home... and now unable to connect to the internet... have also not more of her!
    I went into the Device Manager... in 'other devices' - and it is yellow? mark beside...
    1 / ethernet controller. 2 / multimedia audio controller 3 / PCI modem controller 4 / video...
    They all say "drivers for it are not installed. .... Also, went to "system devices" and find 9 other things that no longer have the drivers installed... said there is also no "audio device" installed!

    My laptop is completely exhausted, or it is better to try to resolve this issue. I'm a fool when it comes to stuff like that... so be gentle with me... what I need to find all the individual drivers and re - install...? BTW... There is no wireless card in the back... (Already checked)...

    Would appreciate any help...
    Thank you

    Hello

    Satellite A10 is a little older model laptop and you can find the drivers in * archives *. go to the [page driver Toshiba | http://eu.computers.toshiba-europe.com/innovation/download_drivers_bios.jsp]

    Archive-online Satellite Pro-online Satellite Pro A series-online Satellite Pro A10

    > / ethernet controller. 2 / multimedia audio controller 3 / PCI modem controller 4 / video

    Download and install: 1) Lan Card 4) graph of the card sound 2) 3) Modem driver download also, other drivers if necessary.

  • HP ENVY m6-1254eo Notebook PC: unable to connect to the Synaptics Pointing Device Driver

    Dear community of Hp,

    I had a problem with my hp envy, which occurs a few weeks previously and now has decided to post here in the forum hp laptop because

    no solution can be found on the internet. Ive done a lot of research and try but nothing happens.

    I knew that the Synaptics Touchpad no longer works. I tried to uninstall and reinstall the driver, but I do help. I still see the touchpad in the listof material and devices.  And every time that select the properties of the mouse it still appears the message like this unable to connect to the Synaptics Pointing Device Driver, if you have installed a different ps 2 device driver scoring please uninstall the synaptics using the Yes button.  You must then reinstall your device external device driverfor score again. 

    In the control panel > Device Manager > display hidden devices under the mouse and other pointing device, there is a yellow triangle on the HP TOUCHPAD SMBUS.

    I really need your hp experts helps solve my laptop problem.

    Thank you in advance.

    Hi @topzias,

    Thank you for the update.

    Would you be so kind as to post what worked for you in the public forum, where others can see it and maybe help?

    Cheers to you and thanks in advance

  • Satellite C660-1NJ - unable to connect to the wireless network

    Hi guys

    I got a 1nj c660 and I have a wireless connection to a Fritzbox 7170.

    Now, this morning, everything was fine and I connected wonderfully, but now I can't connect no settings have been changed I just stop and start as usual. I used configfree and it shows the network but if I try to connect it says unable to connect to the network. I have Win7 home basic OS.

    I uninstalled the wireless network card and reinstalled, updated the drivers but nothing works, I still get the same error.

    Can someone help will appreciate it greatly!

    Hello

    Are you able to connect to open WLan?
    I mean you can try to disable security options in your Fritzbox and might test whether you are able to connect without the WEP, WPA or other safety standards.
    Of course, you should only done for testing purposes

    If this box works, then it means that the security of your router settings were not consistent with the settings of the Wlan card.

  • XT720: Unable to connect to the network for upgrades

    Hello

    I recently had a new Motorola Milestone XT720. I tried to get the software updates using the "connection to phone" functionality system updates. If I connect my phone via the network or via WiFI, I get this message "the device is unable to connect to the server, please try again later"

    How can this problem be solved?

    How to get the system through files zip for Android updates?

    Kindly let me know.

    It is not uncommon to get this message when checking for OTA updates - update servers seem to be pretty random that they are actually on and accessible, or not.

    Your best bet for checking updates is to use the Motorola (MSU) software update. Search on a site of Motorola to find. It is a windows program that will check updates for your phone. More updates appear here before OTA (if they are already on OTA)

Maybe you are looking for