ThinkCentre M83 ist perform the restart (reboot) instead of the stop

Similar Questions

• X 64 Home Premium Vista update triggers a reboot instead of the stop

  I just bought a laptop Gateway FX P7805u and when I stopped it worked fine.  But after I've updated every time that Windows Vista I have that he would choose stop this would trigger a reboot instead of a shutdown.  I returned the phone thinking it was a hardware problem.  But the second laptop worked fine when I got it again, then after the update, it starts again the same problem.  I know that the laptop has been on the market for awhile, so I was wondering if anyone else has experienced this problem or anyone know a work around that because I would like the updated but still with having them a stop function I have to hard stop with the power button every time and is not a stable medium to be shutdown

  Hi Jnlsn01,

  Method 1:

  You can try to download the patch from the link below and install it.

  http://support.Microsoft.com/kb/935881

  Method 2:

  Click Start.

  Right click on computer, then click Properties

  Click Advanced system settings.

  Click the Advanced tab, and then select settings in the startup and recovery section.

  Remove the check mark next to automatically restart under the system failure.

  Click OK to close the startup and recovery, click OK again and then close the System Properties window.

  1. reboot the computer.

  NOTE: The computer restart is no longer automatically when a problem occurs. Instead, a blue screen appears with more useful information.

  2. Please make a note of the error message and error code present on the screen and send it to that we can solve the problems in this regard.

  Thank you
  Melanie

• Does restart/reboot the computer after installing or uninstalling a program?

  Original title: does restart/reboot the computer after installing or uninstalling a program? Which option is it on Vista? Hit reboot? Or off, wait and then start up?

  I was told that if you add or remove a prgram, after it installs you need to 'reboot '.

  Is this true?

  Does this mean that, after the program is installed, you must reach the restart button? Or press 'stop' and then again wait a minute and then be able to save the PC?

  Hello

  Often an installation or uninstallation of will need to reboot to complete and it never hurts except for the
  time it takes.

  A reboot is usually sufficient.

  I hope this helps.
  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• Dynadock: displays preferences are stored in the stop/restart only

  Hello fans of Toshiba and experts.

  I have a problem with * Dynadock DVI * and laptop computer from a different manufacture (with Vista Enterprise).

  I want to use this combination to eliminate the need for a typical desktop computer in office (without multimedia applications or 3D) environment, where * external monitor is defined as main display *, and * LCD internal as an extension of office *.
  This work of setting as planned, the main screen moves between external and internal monitor according to the (UN) Dynadock connection. However, this behavior lasts only until the stop/restart is performed. Then, the configuration is completely random. In some cases, it works as before, in other cases, the default mode is applied - internal LCD becomes the main screen and the image is mirrored on external monitor.

  The whole situation seems to depend on computer with the Dynadock is used. I found the laptop (also Vista) running solid rock with Dynadock.
  All used the drivers were in the latest versions - freshly downloaded, Vista Enterprise SP1 version of the Dynadock 2.3 software update.
  Is there a way to force Dynadock software to use the built-in views configuration whenever the docking station is plugged?

  Thank you...
  Petr Kopecek

  It could be a display driver problem, have you updated display driver and the BIOS of the laptop?

• Lost mail rules section "perform the following actions.

  Hi-

  Install a new version of El Capitan (10.11.2). Set up Mail for the first time. Adding rules to specific e-mail to selected mailboxes. The more rules, I added more I noticed that the section "Perform the following actions" became smaller until this article is no longer usable (see photo). Any ideas what can be done? Is this a bug?

  Thank you!

  -Dave

  

  Please take these steps to remove the mail folders 'sandbox '.

  Step 1

  Back up all data.

  Triple-click anywhere in the line below on this page to select this option:

  ~/Library/Containers/com.apple.mail

  Right-click or Ctrl-click on the highlighted line and select

  Services ▹ Reveal

  the contextual menu.* A Finder window should open up with a folder named "com.apple.mail" selected. If this is the case, move the selected folder - not only its content - on the desktop. Open the window Finder for now.

  Restart the computer. Launch Mail and test. If the problem is resolved, you may have to re-create some of your e-mail settings. Any writing paper custom that you created may be lost. Ask for instructions if you want to keep these data. You can then delete the folder that you moved and close Finder.

  CAUTION: If you change the content of the sandbox, but leave the folder itself in place, Mail may hang or starts any. Remove the tray to sand everything will be rebuilt automatically.

  Step 2

  If step 1 does not resolve the problem, repeat with this line:

  ~/Library/Containers/com.apple.MailServiceAgent

  * If you do not see the item context menu copy the selected text in the Clipboard by pressing Control-C key combination. In the Finder, select

  Go ▹ go to the folder...

  from the menu bar and paste it into the box that opens by pressing command + V. You won't see what you pasted a newline being included. Press return.

• Device driver tiny unknown lenovo ThinkCentre M83 LEN4002

  I did a fresh install of Windows 7 on a Lenovo ThinkCentre M83 (tiny, small form factor) desktop computer and I have an unknown device, I couldn't find the drivers in Device Manager. It's ACPI\LEN4002. Googling reference views embedded ThinkPad monitor which doesn't seem to be the right thing here. I already installed the chipset driver, the Intel haswell/vga driver, AMT, MEI, the Application Interface of Lenovo (LBAI, ACPI\LEN4001) driver is not driver Intel WIDI. Even if it is listed in the matrix of driver for this model, the thinking says that it is not compatible with this system.

  Someone has an idea of what device it?

  Thank you!

  Found after downloading the pack from SCCM drivers for the model. LEN4002 is identified as the 'of Lenovo APS sensor application interface".

  Well, of course it is! :-)

• 0x000000F4 beginning physical memory dump, this is the error message I got when I perform the adaptation of data operation or run heavy programs, and when I play the music of his tempo becomes slower.

  Original title: 0x000000f4 beginning physical memory dump

  STOP: 0x000000f4 (0 x 00000003, 0x89cb3a18, 0x89cb3b8c, 0x805d29b4) beginning physical memory dump

  This is the error message I got when I perform the adaptation of data operation or run heavy programs, and when I play the music of his tempo becomes slower... What do I do? Help, please...

  Hello

  You did changes to the computer before this problem?

  Step 1: Check if the problem persists in the clean boot state.

  From your computer by using a minimal set of drivers and startup programs so that you can determine if a background program is interfering with your game or program. This type of boot is known as a "clean boot".

  Reference:
  How to configure Windows XP to start in a "clean boot" State
  http://support.Microsoft.com/kb/310353

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:
  1. click on start and then click Run.
  2. type msconfig and click OK.

  The System Configuration Utility dialog box appears.

  3. click on the tab general, click Normal Startup - load all services and device drivers and then click OK.
  4. When prompted, click on restart to restart the computer.

  Step 2: Also, look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.

  Reference:
  Using the event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/snap_event_viewer.mspx?mfr=true

  Understanding of event viewer
  http://www.Microsoft.com/resources/documentation/Windows/XP/all/proddocs/en-us/event_overview_01.mspx?mfr=true

  Procedure to view and manage event logs in Event Viewer in Windows XP
  http://support.Microsoft.com/kb/308427

• What is the difference between the stop and restart?

  What is the difference between the stop and restart?  I feel that stopping closed all processes, completely erases RAM memory and clears the cache of the processor.  I need to know if 1) this is a correct assumption and 2) which is better for daily maintenance of the system.  Thank you in advance.

  Hello Jeremy_1976,

  Your support when the judgment is correct. Basically, it stops the process and completely turns off your computer. Reboot, however, temporarily your PC stops, then turn it on again. This happens usually when Windows updates are installed. After installation, the system is restarted (rebooted) so that any update has been successfully installed and works as it should. You can be a little mixed upward the reboot and the hibernation. Reboot is, as I have indicated previously, basically a reboot of your machine. Ultimately, your PC is on again after a reboot. However, hibernation, stores all data currently in memory in a special file, then the PC turns off. When you then turn on your PC, that is, coming out of hibernation, hibernation files is used to restore the status of the PC than when you initially put into hibernation. In other words all the programs you had open before will automatically open and be ready to use hibernation.

  Hibernation or sleep for that matter is for short-term use. It is normal in Hibernate, or sleep if you want to be away from your PC for half an hour or so. If you leave more than I suggest you stop completely.

  A point to remember about hibernation is that, if you use put into hibernation, you can't, once you get out after hibernation, install programs or updates. You have to stop and restart normally to do.

  This forum post is my own opinion and does not necessarily reflect the opinion or the opinion of Microsoft, its employees or other MVPS.

  John Barnett MVP: Windows XP Expert associated with: Windows Expert - consumer: www.winuser.co.uk |  vistasupport.mvps.org | xphelpandsupport.mvps.org | www.silversurfer-Guide.com

• Office restarts itself when it is stopped with the start menu and the power button.

  Original title: stop problem

  My office will restart itself when it is stopped with the start menu and the power button. I went to the start menu task bar to ensure that the setting was correct.

  Hello

  1. Press (Windows key) + R and type "regedit" and press enter.

  Find the following key:

  Geographical area: HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Winlogon

  3. double-click on "PowerdownAfterShutdown.

  Then,
  Change it to '0' if it is '1' OR
  Change it to '1' if it is '0 '.

  And press ENTER.

  Then reboot andtry to stop.

  If this does not work, make sure that you change the value in regedit back to what she was original

  Try this one:

  Put the laptop to sleep then let it restart itself. Then run command prompt and

  Enter 'powercfg - lastwake. It should give you the description of what caused the alarm.

• When I opened my account it gives that error message = this file does not have a program associated with it to perform the action, please install a program

  When I double click on any folder error message comes ==this file has not a program associated with it for performing the action, please install a program, or if alreadycreate an association program in default Panel.

  
  
  and when I right click it once options such as search, cmd, opening...
  
  
  
  
  
  
  Please help me I would be very grateful to you...

  Hi Siddharth,

  Were there any changes made on the computer before the show?

  Method 1:

  Restart your computer in safe mode and check if the problem persists.

  http://Windows.Microsoft.com/en-us/Windows7/start-your-computer-in-safe-mode

  Method 2:

  I suggest you to refer to the items and set default values:

  Change the programs that Windows uses by default

  http://Windows.Microsoft.com/en-us/Windows7/change-which-programs-Windows-uses-by-default

  Change default programs using Set Program Access and computer defaults

  http://Windows.Microsoft.com/en-us/Windows7/change-default-programs-using-set-program-access-and-computer-defaults

  Method 3:

  I suggest to create a new user account and check if it helps:

  Create a user profile

  If the new user profile resolves the problem, you can fix the corrupted profile.

  Reference:

  Difficulty of a corrupted user profile

  Let us know the results.

• My sfc/scannow got stuck on checking 100% and then he said that he was unable to perform the requested operation. slow startup

  Hello

  I noticed a couple of days my laptop took a start-up and initialization time. its about 10 minutes. Once his work, it seems almost fine, sometimes a slow lttle with programs saying does not for a while and then they do it.

  I tried to run a sfc/scannow twice and each time he's stuck at 100% full audit. Thus, the first time I have waited a long time, looked at the Task Manager and saw that it was inactive closed it. the second time I waited a long time and he said: windows resource protection could not perform the requested operation.

  What should I do?

  I try to reinstall windows 8 all together and start over.

  Please help me!

  Hello

  You can try the following article instead:
  http://www.kapilarya.com/fix-do-Inbox-Corruption-repair-using-DISM-in-Windows-8
  It generally a better method than the System File Checker.
  Hope this helps, good luck :)

• Error detected while trying to perform the work

  Hello world

  
  

  One of my users tried to run a rule in Hyperion Planning 11.1.1.3 and an error occurred: error detected while trying to perform the work

  
  

  When I went to Essbase, I found that when I launched the rule an error pops up:

  
  

  ERROR - 1006059 - invalid block header: illegal block type - please use the IBH Locate/Fix utilities to find or fix the problem of IBH.

  
  

  I read it could be a problem with corrupt blocks. I'm not familiar with MXL and I read that there are commands that I could run. Someody could give me a help?

  
  

  Kind regards
  

  IBH errors when there is an incompatibility between the .pag file and the index file (.ind). In other words the file pag and .ind file are not synchronized.

  run it separately in maxl

  change the HYPCOLAN database. Invalid_block_headers repair COSTS

  Still the error ibh, then reload metadata and data backups and try to re start batch Scheduler.

  After re - run batch Scheduler the same problem persists, then

  1 save the relational tables of demand in 11.1.1.3

  2 backup essbase objects (rul, otl, CSC, rep)

  Planning enforcement

  (A) create a new planning application

  (B) restore all the 11.1.1.3 relational tables in the newly created application application

  (C) to restart the Services

  (d) copies of objects like .csc, rul, .rep in db (excluding the .otl)

  (e) re - import the data into db

  (f) to run batch Scheduler

  Or you can make use of LCM method

  Try also to optimize your planning applications

  Kind regards

  Sreekumar heraud

• Unable to perform the backup after changing the password for SYS

  Hello everyone, I'm getting the "unable to perform the backup because the database is closed" error after performing a backup scheduled on the database. The database is clearly open, already tried rebooting the database/system, but without success. This is probably related to the very recent change of password for SYS. As we changed it, we were able to run the backup... Can I ren hollow backupset backup RMAN command, but without success with Enterprise Manager.
  
  Does anyone have an idea? Thank you!
  
  
  ATT,
  
  Gabriel.

  Have you updated the password in addition to credentials on the OEM... Otherwise, please update and try again.

• Why I get that there are not enough licenses installed to perform the operation?

  I have three servers that I fight with the chance to talk to an hp 1510i, but it's a different test. I have rebuilt the three servers 2 and now when I try to add them to the virtual Center 2.5.0 I get "There not enough licenses installed to perform the operation." These machines were on Virtual Centre before I rebuilt the. I don't understand why licensing is not be happy. Can someone give me advice on how to fix?

  Let me know if you need more information.

  Thank you

  Ken

  Your image shows 0 licenses for virtual center agent, that's why you can't add.  Check your hosts and see which servers are using what licenses.  A reboot must have cleared out the number of licenses, which must have caused the hosts re - synchronize the license info, which they periodically anyway.  This may take some time, depending on your host is on the refresh interval.  Make sure you do not have more than 6 ESX host, because that's what you are licensed.  If this is not correct, check your license file is not the correct information.  You can always go online to the portal of licenses and generate a new.

  -KjB

• AMT-01190: the user is not authorized to perform the requested listener com

  Hi all
  I just reinstalled forms10g oracle and oracle 10 g rel 2 on windows vista. The first time I installed both software, I swithched d pc switched off without turning off the earpiece on my laptop. When I rebooted, I found that I could not start the two forms 10 g and oracle 10g database, not to mention loggin. I have therefore re-installed two prodcts. Whenever I try to turn off the listener I get error TNS-01190: the user is not authorized to perform the requested listener com. I tried several ways to turn this off, but every effort has failed. After reading several books on this subject, I learned that if you change the password for any user who knows the password should be able to turn off the listener. But I still get the same error when trying to add a password. Please can someone help me by telling me how I can deduct the oracle user who has administrative rights to perform this task.
  Pls forgive me for the long text. Thanks again. PLS, note I'm not an expert so pls be explicit in your explanations.
  
  see you soon
  AJ

  You are welcome.

  Another method could be this:
  -try to identify the Oracle home for the listener. This should be the same house where the DB.
  -Open a prompt on your vista, the ORACLE_HOME value this folder location, and then cd to this location of ORACLE_HOME.
  Now, enter the following text:
  lsnrctl start

  You should do as a user with administrator privileges.

  AMN