ThinkPad 13 - OSD - no boot pxe with ethernet dongle?

Similar Questions

• What is the recommended method to start automatically on PXE with Latitude Laptop?

  'Force PXE to the next boot' is not supported on Latitude systems more and we need to boot PXE while reinstalling the laptops.

  We can change the boot order so that NIC is the first, but it does not work because AssignedSequence-value of DCIM_OrderedComponent is equal to zero.

  Any help with this?

  The problem is that the NETWORK card is disabled as default boot device.  You will need to use CCTK to activate the NETWORK card as boot device and then set it as the primary boot device.  The next version of the OMCI will have the ability to configure it.

• Can I plug two Airport Express units with ethernet cord and have a third Airport Express Terminal receive airplay music wirelesslly? In other words, can I combine a Wi - Fi network and roaming?

  I have an undesirable on the 1st floor, connected to the cable modem Ethernet event. I want to connect that AE to an another AE on 2nd floor with ethernet cable AND have a 3rd AE on the 1st floor to receive music through AirPlay wireless. I thought that linking the two first AEs with ethernet would improve the performance of web site on my iMac desktop, which is on the 2nd floor and connects to the 2nd floor AE via wifi. The EI the first two are newer model (MC414LL/A); the 3rd AE is old model (MB321LL/A) and is connected to a stereo Bose with a mini-jack to RCA cable double cord. I tried to set up this network using AirPort Utility, but have had no success. I don't know if it is possible to do what I want to do; and if this is the case, I don't know how to set the various parameters for each AE using AirPort Utility. I've temporarily implemented a purely wireless network; Do not connect DO NOT the two AEs with ethernet and everything works. I would enjoy my plan as above, or if I hold with purely network wireless. Any help would be greatly appreciated.

  Using ethernet network roaming between the two floors is a much better idea than anything wireless.

  The installation should be automagical if you start with the two AE plugged in by ethernet.

  It must be configured in standard roaming with identical names wireless.

  If you have any questions... Please, just after the airport utility screenshots of the configuration... but

  An express train is probably the router? You must confirm this.

  The second express is so configured in bridge... It's on the network tab, disable the bridge mode.

  

  Without thread is set to create a wireless network and simply use the same name and the same password as the other Express.

  As it should be automagical when you WAN on the second AE plugged into the LAN on the first AE.

  Wireless and then extend to will also be installed enough well automatically even if sometimes it works better in a client that extend wireless mode.

  See the Client mode.

  AirPort Express: How to join an existing client mode - Apple Support Wi - Fi network

• Peripheral storage but not with ethernet connection USB port work

  I usually connect my Mac Book Pro with ethernet using the USB port. It was working fine, but since a few weeks, it has stopped working. But the normal usb storage devices only works very well in this port. So, I tried to connect the ethernet to another USB port near the seizure of power, which seems to work very well. So, that means that the other USB port does not work properly. How can I fix? I use Mac Book Pro with the Version OS X El Capitan 10.11.4

  Try resetting the SMC reset management system (SCM) controller on your Mac - Apple Support

  Shouldn't use you a crush on Ethernet card instead of a USB adapter to Ethernet?

• iMac 27 "with the second monitor boots black with cursor

  I can't seem to find another discussion altogether as my problem starting special 'black screen ':

  New iMac 27 "retina 5K (end of 2015) running OS X El Capitan 10.11.3 with second monitor Samsung connected by Mini DP - DVI.  When starting, the two screens are displayed in black, but the cursor is available and can be moved.

  I have to make a hard stop and disconnect the second monitor to start at the login screen. Then I can reconnect the monitor and everything works.

  Any suggestions for a fix?

  So, I spent some time with Apple customer support. Several of the standard troubleshooting for problems of mystery, they came to the conclusion that there was an incompatibility of driver with the Samsung monitor at startup which is mucking things up, and I just have to accept starting with the second disconnected monitor then plug it in again after a successful login.

  Samsung does not write the monitor for Mac drivers (for some reason any), that's why the customer support figures that there is a hangup at startup. But why OS X recognize the monitor and run fine otherwise? Why only hang at boot time? And why my Mac Book Pro 2007 running the same version of El Capitan boot fine with the connected monitor? It has something to do with the Thunderbolt/mini-DP-to-DVI connection? I don't know, and I guess that Apple's Support is not either.

  I fell on a hack, which is as follows:

  1. start with the second monitor connected

  2. in the "black screen with cursor" hold the power button quite long to put the computer to sleep

  3 wake up the computer with the keyboard or trackpad or other

  4 and now the login screen will appear.

  5 log in as usual.

  6.

  I hope this helps someone. One day I'll get a more compatible monitor and it will not be a Samsung.

  They make nice dish, however.

• The Web of LabVIEW user interface directly to the sensor with Ethernet connection

  Hello

  Is it possible to connect to the interface user Web of LabVIEW directly to a sensor with Ethernet connection?

  By directly, I mean without using any Web Service LabVIEW VI.

  Thank you

  Marcelo

  Hello

  The only communication with other devices using the Web user interface designer is through web services, either motorized or not LabVIEW. To connect with a sensor with the generator of the user Web interface without using LabVIEW, the sensing device must be accessible via HTTP and give you a way to read its data using XML web services based on.

• you want to have my pc to be a configuration to boot Daul with Windows XP PRO sp3 and WIN7 how?

  Daul Boot Windows XP PRO sp3 and WIN7

  I want to have my pc to be a configuration to boot Daul with Windows XP PRO sp3 and WIN7 how?

  Hello

  Access the link that has a video on how to set up a configuration to dual-boot between Windows XP and Windows 7: http://www.microsoft.com/showcase/en/us/details/ae3108ed-a8a1-4ba3-8698-01b8cedd2cf4

  Here's a few that has information on multiboot: can I have multiple operating systems on my computer (multiboot)? : http://windows.microsoft.com/en-US/windows7/Can-I-have-more-than-one-operating-system-on-my-computer-multiboot

  Install multiple operating systems (multiboot): http://windows.microsoft.com/en-US/windows7/Install-more-than-one-operating-system-multiboot

• 2 PCs, PC2 connects via connects the PC1 wireless Internet wireless, network sees home, but will see no internet except with ethernet cable - illogical!

  1 computer (PC1) running Vista, to date, AVG free, Spybot S & D the timer running
  2 may have been infected with spyware by surfing - received message in the Explorer to search for the virus, think it was fake
  3 then lost wireless internet in the two IE & Firefox
  4 but had a Skype conference call minutes 40 OK - Bizarro
  5 lit (PC2) laptop running Windows (light version) 7 - same problem with browsers
  5A AVG on PC1 has been updated - ran a deep analysis, found 44 spywares & fixed them
  5 b also ran registry cleaner
  6 has managed to update Spybot, is all business, then working browsers, internet connection complete
  7 can now connect 1 PC to internet with ethernet connection, he can see the wireless and home networking (local access only) so I guess the wireless work, but he can not see the internet on this subject.
  8 update both Spybot and AVG on PC1 with wired ran the two found no additional infection
  It's really strange, I do not understand how to see PC2 PC1 and PC2 connected wireless to wireless home, but PC1 is unable to connect to the internet without a network cable...
  All pretty useless Windows diagnostics

  Hello

  A message in the small window that says connected wireless does not mean that you really have a valid functional connection.

  Linking the means of router you can enter the IP base of the router in an address bar in one go, being able to connect, see and configure the router menus (extended to the wireless router manual should explain how to do).

  If it will not connect to your wireless router, journal newspaper from any computer that can connect to the router wirelessly with a wire, disable wireless security, make sure that the wireless SSID broadcast is enabled and try to connect with no. wireless security.

  Enable security wireless after you eat to make a functional connection.

  ----------------------------

  The wireless card drivers much also install utility wireless of the seller.

  To ensure that if there are utility wireless isn't running with the native Windows wireless utility provider (Service WLAN).

  ----------------

  Firewall software can block traffic Local to the network that you are trying to use because it is not set to the network Zone Trust.

  Make sure you firewall No. preventing / blocks wireless components to join the network.

  Some 3rd party software firewall continue to block the same aspects it traffic Local, they are turned Off (disabled). If possible set up the firewall correctly, otherwise totally uninstall and get rid of its remaining processes that permit the own local network traffic flow.

  If the 3rd party software is uninstalled, or disables, make sure Windows native firewall is active .

  party like Hello and NetMagic 3rd network managers can block local traffic too.

  ---------------------------

  Stack TCP/IP (network IP number) of work should look like.

  Right-click on the wireless network connection card, select status, details and see if she got an IP address and the rest of the settings.

  http://www.ezlan.NET/Win7/status-NIC.jpg

  Description is the data of the card making.

  The physical address is MAC of the card number.

  The xx must be a number between 0 and 255 (all xx even number).

  YY should be between 0 and 255

  ZZ should be between 0 and 255 (zz all the same number.)

  The date of the lease must be valid at the present time.

  * Note 1. IP that starts with 169.xxx.xxx.xxx isn't valid functional IP.

  * Note 2. There could be an IPv6 entries too. However, they are not functional for Internet or LAN traffic. They are necessary for Win 7 homegroup special configuration.

• After the vista update, the file came out: \boot \BCD with status 0xc000000f. window cannot start and no response my installation dvd

  Last week I've updated in my vista once it was released the file: \boot \BCD with status 0xc000000f. I put my recovery disk window answered, is not obtained in the boot, press F8 did so. I considered that my hard drive was broken, so I changed the hard drive, but it can in installation but couldn't fix it and no driver may be dependent. What can I do? I did all thishttp://support.microsoft.com/kb/927391 step, still does not work. Help, please.

  I think you should contact the manufacturer about this problem with the Bios...

  It is usually F2 or delete to enter the Bios / configuration at startup.

  See you soon.

  Mick Murphy - Microsoft partner

• Boot Vista with all available processors?

  I remember seeing a few settings such as 'Boot Vista with available processors' online.  It works for a dual core laptop if I change the start setting using 2 processors? It could accelerate the boot process?  Thank you

  Hello

  In fact, there is often little or no difference.

  Start - type in the search-> msconfig box find top - make a right click on - RUN AS ADMIN

  Startup - Advanced Options - check the number of processors - defined tab the number you want.

  OK - apply / OK.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• vSphere 5.5 with ethernet Intel x 540 - AT2 10BG question

  VMware ESXi 5.5 with 10GB network card upgrade and switch hosts cannot do more than transfer of 750MBIT

  vSphere 5.5 with ethernet question intel x 540 10BG

  https://communities.Intel.com/thread/48512?start=0 & tstart = 0

  We have dealt with this problem as these cards have been installed. We only run a custom lenovo ISO of ESXi 5.5 U3 on our 4 hosts. We have a complete infrastructure of 10 GB (switch/router/host). We do not seem to make more than 300 MB/s speed between Windows clients with network throughput tests, such as iperf and psping.

  Between two VM linux on the same vSwitch, we can get a full 10GB and a little less during the delivery. We have not activated jumbo frames. We have tests with frames and get better speeds, but I don't think it should be necessary since we can get the full flow under Linux. I have a box to open with VMWare and no real progress has been made, they suggested tuning some settings on the network adapters in windows nothing helped.

  Before I linked to similar problems with Intel 10 GB cards, other persons must have met as well.

  I ended up resolving this issue. It turns out that RSS wasn't working properly in our test VMs so she distributed no treatment on the other cores of vCPU. It was indexing a processor and the others were at 0%. After the active spin up to two virtual machines on 2012 with RSS, I could easily break our previous limits. Another adjustment is possible, but we were getting ~8.5Gb/s with only the active RSS.

• After installation first boot failed with the message: cannot open the volume, because the file is locked, you quite accessrights...

  After installation first boot failed with the message: cannot open the volume, because the file is locked, you quite accessrights...

  What can I do?

  Have you tried what he says in the link I provided?

  or

  A chat session where an agent can remotely look inside your computer can help

  Cloud creative support chat (all creative cloud customer service problems)

  http://helpx.Adobe.com/x-productkb/global/service-CCM.html

• Workstation 9 - broken PXE boot - works with 8 workstations

  VMware Workstation 9 newly released, the PXE boot is broken. It works on the same machine with VMware Workstation 8.

  
  Virtual machine specifications:

  -Windows 7 and Windows 7 x 64

  -Bridged networking

  -2 1 processor cores

  I tried on different hardware, without Windows Firewall, but the PXE boot is broken when you use Workstation 9. Any thoughts as to why her behave this way?

  We are trying to perform a PXE boot and it gets everything stuck by sending requests for the services of pre-launch on the remote server, however, it seems that the return packets are not received. On 8 workstations, these are received and PXE boot works correctly.

  There is no AV installed in the host operating system.

  Wow, okay, just confirmed this seems to be a MAJOR bug in the work station 9, concerning ONLY to run 2 hearts or 2 CPUs. I tested with my cell phone would support all configurations (this is a quad core with hyperthreading). This applies in my case to Novell Zenworks Imaging, but can affect more.

  Results

  Config	PXE
  1 processor, 1 core	Success
  1 CPU, Core 2	In case of failure
  1 CPU Core 3	Success
  1 CPU, Core 4	Success
  1 CPU, Core 6	Success
  1 CPU, Core 8	Success
  2 CPU, 1 core	In case of failure
  2 CPU, Core 2	Success
  2 CPU, Core 3	Success
  2 CPU, Core 4	Success
  4 CPU, 1 core	Success
  4 CPU, Core 2	Success
  8 CPU, 1 core	Success

  Now here it gets crazy. My issue seems to be with the v11.2.0.0 of the Agent Novell PXE (Preboot Execution). It says "Sending queries to xxx.xxx.xxx.xxx" then he received never actually do anything to continue the boot process, but ANY other config except 2 CPU or 2 cores CPU works fine.

• Satellite L300D boot up with error message

  Hey!
  Then when I start my laptop, it is said;

  The other day the screen empties and restarted with the following eror is
  PXE - E61: Media test failure, check cable of
  PXE MOF: outgoing PXE ROM no boot device, please insert the boot disk and press any key

  and then he mentions something about a realtek ethernet controller.

  I know that laptops trying to boot from a network or a local network, so ive changed these options in the boot menu, but any order is the start menu, it will always try and boot from a network or on the LAN.

  So I disabled the network and local network settings in the bios, restarted the laptop, and then he said something as the media not found, insert the floppy disk and press a key. So I tried to put the toshiba recovery disc in, it gets so far and then it says theres no disc present.

  Before ask you, the drive IS DETECTED in the bios. So it is recognized it...

  I'm all out of options now so I need help. is the drive broken? or what's the story?

  Thanks in advance!

  Hello

  Yes, perhaps the HARD drive is broken because the laptop attempts to boot from LAN.
  It seems that the BIOS can not find else device startup.

  I think you need to replace the HARD drive and should install Windows system once more.

  Good luck

• MDT 2013 Thinkpad Yoga 12 - WinPE boot problems

  We have two models of Thinkpad Yoga and use the same ethernet USB dongle to run MDT and their image with Win 8.1.

  Type 20 c 0 works very well. When we arrived the 20DK of a new type, we had some problems with our image of fat because of the different hardware profile and we weren't using a configuration of total control for drivers on our MDT.

  I created a new MDT installation on a virtual machine and I use the method of total control of the management of drivers by model. I have a profile of selection for winPE and imported the drivers of storage and network for both models (x 64 only, we don't have any x 86). I tried initially the USB3 Ethernet adapter driver I found under downloads for the 20 c model 0 but have tried since the upload of pack pilot SCCM and other I found specifically for the adapter realtek and SCCM, but nothing has changed. The current versions of pilot in my winpe folder are 8.15.0701.2014 and 8.8.0911.2013. Have updated the deployment share, copied the contents of the x 64 folder and copied the litetouchx64.wim in the sources on our USB startup folder and renamed to boot.wim.

  Currently on the 20DK I get the initial screen for MDT spash with blue background, but before any connection charges of screen I get the blue screen of crash with error (ndis.sys) System_thread_exception_not_handled. I guess I do know for sure that it is a problem of network driver but because it fails before the same connection to the deployment share it led me to believe that this was the case. I tried to turn off 3 USB mode in the bios to see if this will have an impact, and he didn't.

  The 20 c 0 still works fine and I was able successfully to the image (from my old wim of fat that I copied from my old server mdt)

  Completed up to add all the drivers for this model in the folder of WinPE drivers and who took care of her.