ThinkPad L520 CD/DVD drive recognize or write to disks

Similar Questions

• My DVDRW DRIVE will not write to disk

  My DVD - RW drive will not write to disk, it is only recognized on my computer as a DVD ROM and CD - ROM only. I looked in Device Manager and there is no question mark by it and he says it's working properly, I had it works normally about 2 weeks ago, can you help me? L.M.Baggley

  If it worked about two weeks ago, you could try a restore point to return the parameters of your system they had previously, by using the system restore. It is in the startmenu, all programs, system, SYSTEM RESTORE tools. Choose a point of older and not the most recent. Alternatively, right - click the icon for your drive and make sure that the recording tab is there, and that registration is enabled on the computer. You will also find it better if you record at a slower speed and not the faster if you want to avoid reading errors. "THE BEST THING TO DO IN THIS WORLD IS A WRONG ANSWER! "I"DON'T"WINDOWS...". »

• my dvd drive not recogonising not any disk

  * O.T. > dvd player

  Hello

  my dvd drive not recogonising not any disk, I tried MS fixit but no resultsI.I use a Samsung dvd player in my Win 7

  Its possible that the cd/dvd drive does not, it can happen. Try a lens of dvd/cd cleaner to see if that helps.

  Make sure you have the latest drivers and software installed for the reader, if they are damaged, they may have to reinstall.

  If you haven't already done so, check out this article - https://support.microsoft.com/en-gb/kb/314060 that has a number of suggestions to try.

• DVD drive does not write - Satellite M40X-175

  Im having a problem with my dvd. I tried to burn my movies, music and my files on a dvdr or cdr, I tried DVD - RW and CD - RW but I do it every time gives error "d:\ is not accessible incorrect function". but when I try to watch a dvd movie or use my music cd, it does not work. He reads. Does this mean that my dvd drive cannot be read and not write?

  [Edited by: admin on 4 February 06 20:23]

  Hello

  Satellite M40X sounds new enough to have CDs of feature writing. Seems to me a HW question but you can try:
  1 - Clean the blank CD with a cloth dry
  2 - blow to the goal and do not forget that there is no dust
  3. you can uninstall the driver from
  -> Panel-> system-> hardware-> Device Manager-> DVD - RAM-> (right click) properties--> driver uninstall-> restarting your laptop.

  If they do not contribute, you can contact a Toshiba authorized Service partner. You can find the one nearest to http://217.45.123.236/toshiba/resellerselector.nsf/WebServiceProv?OpenForm

• ThinkPad Edge S430 DVD drive missing

  ThinkPad Edge S430 DVD missing disk.

  The DVD drive is missing from 'my computer '.

  I couldn't find the drive to DVD as well the Device Manager.

  I've updated for windows 8

  I installed all the drivers for windows 8 includes BIOS updates and etc.

  It worked. Thank you very much

• HP Pavilion p7-1234: functional CD/DVD drive will not boot Clonezilla disk recognize

  Have three HP p7 in small desktop running Win 7 64 bit. (Avast free version)

  None of them will recognize a bootable Clonezilla ISO or Zip, whether on CD/DVD or USB.

  Measures already taken:

  BIOS set to boot from CD/DVD

  In turn the BIOS configured to boot from USB

  Have used any compatible version of Clonezilla downloads based on my operating system and the processor, including the generic i686 ISO and Zip. (and makes bootable USB drive)

  CD/DVD and USB function perfectly well otherwise. Able to access the other disks and USB media with no problems.

  Also able to see the Clonezilla ISO when I look at the CD/DVD drive.

  It starts simply what whether Clonezilla.

  If someone has encountered this, I would like to share your experience.

  Thanks for your time.

  One rookie mistake.

  Problem:

  Bad, I carved the Clonezilla ISO to CD/DVD disc.

  Solution:

  1. download the ISO Clonezilla appropriate for your computer, on your desktop.
  2. place the disc in the CD/DVD drive
  3. "right click" on the Clonezilla ISO on your desktop.
  4 Select "Burn Image" and follow the default values.

  Now you have a proper boot Clonezilla disk.

  Next:

  1. make sure the BIOS is set to CD/DVD is bootable.
  2. place Clonezilla disc in open the tray of the CD/DVD drive.
  3. restart the computer and close the CD/DVD tray
  4 put your finger on "F9" key and now wherever the blue HP screen appears, press "F9".
  5. boot Menu loads.
  6. move arrows down to the first line indented under "ATAPI CD/DVD DRIVE...
  SATA2 or SATA3 will be according to your system.
  7 hit ENTER.

  Clonezilla immediately, boots and loads.

  I hope it works for you.

• Of Satellite A100 CD/DVD drive does not write CD

  My A100 running Vista cannot burn CD whatever CD I insert for registration, do not see it A100. DVD burning is OK. Weird and irritating. Can anyone help?
  S

  Hello

  Don t use Roxio program to burn the CD.
  Use Nero! It of much better! I also use it and I m very happy.

  I noticed that Roxio modifies the registry key, and so sometimes the CD/DVD drive cannot read or burn some mediums.

  Delete the Upperfilter and UpperFilter in this key:
  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Contro l\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}
  and restart the laptop

  Greetings

• DVD drive not read/write

  my dvd drive not reading/writing.its a matshita dvd ram uj - 850 s .windows vista sp2.sony vaio vgn ar 550u.its showing the CD/DVD I insert as empty. someone help?

  Hi dt6789,

  Please see the post below with a similar problem and fix possible:

  http://social.technet.Microsoft.com/forums/en/itprovistahardware/thread/57d84d2b-5dd5-4f37-BADC-9e784a24211c

  I hope this helps!

  Debra
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think

• CD/dvd drive read only not all disks

  When I put a disc in the drive says that there is no disk in it
  I've uninstalled and restarted the computer, and used the program fix
  and the computer says that it works correctly

  as I looked to filter things and he's not here

  Hello

  Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
  http://support.Microsoft.com/kb/943104/

  If necessary:

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack.

  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• My CD/DVD driver won't read any disks. (windows Vista Home Basic)

  My driver CD/DVD does not read discs. Whenever I have insert a disc into my CD/DVD player, absolutely nothing is happening, as the drive is not yet there. I tried to get gpedt.msc as help Windows said to me, but the file is not found. Can someone tell me what's wrong and help me fix?

  Hello

  Try this - Panel - Device Manager - CD/DVD - double-click on the device - driver tab - click
  Update the drivers (this will probably do nothing) - then RIGHT click the drive - UNINSTALL - REBOOT
  This will refresh the default driver stack.

  Then, work your way through these - don't forget the drive might be bad, could be a loose cable or
  slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error during the installation of Windows Vista after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Hope these helps.
  Rob - bicycle - Mark Twain said it is good.

• To replace the DVD drive with the second HARD disk on the pavilion DM4-2000

  Hello

  I would like to remove my laptop DVD drive and replace it with an SSD. It seems that the DVD player does not use the standard format of pins SATA for hard drives, rather than use a slightly smaller connection. Is it possible to connect a laptop SATA drive this in any case and if so, how?

  Any help appreciated,

  Tim

  You need a car adapter. Your laptop uses 12.7 mm optical readers and you need this card:

  https://www.jacobsparts.com/items/HDDBAY-01/

  Here is the Service Manual:

  Manual

  See Page 45 for replacement instructions.

  You place the additional hard drive inside the adapter, then swap the front to make look it good.

  If it's 'the Answer' please click on 'Accept as Solution' to help others find it.

• DVD drive does not write most of the time

  Please, I would like to help here:

  1: HL-DT-ST DVD-RAM GH22LS30 ATA Device "SATA".
  This device well read no problem at all, but it well not write more then about 5% of a DVD and then he throws. With the help of the Super Multi Drive LG installation disc.

  2: cannot install: Microsoft SALIOU adapter
  3: cannot install: Microsoft tity Tunneling adapter
  4: cannot make a backup of the system

  DETAILS: Windows 7 Ultimate
  Processors = processors Dual Core AMD (tm) 4450e
  Processors = processors Dual Core AMD (tm) 4450e
  3 GB of Kingston
  2 HD 1 TB every time good job of SATA.

  Thank you in advance for any help you can

  The DVD player may require cleaning with a cheap kit that you can buy at any place that sells computers.  I had good experience with my readers DVD LG, not to mention my LG TV that I love.  One thing you can do when you are trying to burn DVDs would be to reduce the burn speed.  I usually use the software Roxio or Nero to burn DVDs - they have always worked well for me.

  Relative to the backup, use one of these big drives for backup and you get a good 3rd party backup program like the free Easeus todo backup free of charge that you can download from

  http://www.todo-backup.com/products/home/free-backup-software.htm .  Better yet, you get an external hard drive.  You can buy these days 1.5 to ones for about $90.

  Good luck.

• CD/DVD drive do not write!

  I have a HP Compaq 6735 s with a TSSTcorp CDDVDW TS - L633L ATA Device and during the last few weeks, he was not able to burn discs. It seemed to happen from one day to the next, I tried various different software and have concluded that it is certainly something to do with the player.

  Each software States that the CD/DVD has burned successfully however, the CD/DVD cannot be read by anything, not even the computer, he wrote of.

  Someone at - it solutions? I've looked everywhere and can't find any similar problem?

  Hello

  Download ImgBurn , and use this to see if you can burn a disc successfully.  If this does not help, try to run the process below.

  First, try the automated Microsoft fixit on the links below.

  Windows 7

  Vista

  Check if the drive will now burn.

  If the drive does not, in the Start Menu, open Control Panel and click Device Manager.  Click to open the IDE ATA/ATAPI controllers.  Right-click on the first channel and select uninstall.  Do not delete if requested drivers.  When uninstalled repeat the process for each channel.  Also, if an ATA controller is listed, right click and uninstall it, once again is not removing the drivers if requested. Then, open the CD-ROM/DVD-ROM drives.  Right-click on the drive and choose uninstall.  Do not delete if requested drivers.

  Restart the computer and let Windows reinstall devices.  Check the disc again.

  If it still does not work, re-run the fixit automated Microsoft at the link below.

  Windows 7

  Vista

  Then, in the Start Menu, open Control Panel and click Device Manager.  Click to open the CD/DVD-ROM drives.  Right-click on the drive and choose uninstall.  Do not delete if requested drivers.  When the device has been uninstalled click the icon 'Search for hardware changes' (usually just below help in the toolbar).  Let windows reinstall the disc and see if it now Burns ok.

  Best wishes

  DP - K

• I have an error 39 and my cd - dvd drive will not read any disk

  My drive does not work tried several troubleshooting technicians.

  Try following the steps under "Windows XP" in the article following the MS KB:

  http://support.Microsoft.com/kb/982116

  These measures, to remove the UpperFilters and LowerFilters, values if they exist, in the registry key named can help.

  Create a System Restore Point beforehand and restart the computer later.

• CD / dvd drives will not read / write to any disk

  Hi, can someone help (first timer) I have two cd/dvd drives will read / write to disk get them all is a window pops up asking me to insert the disc. all my drivers are up to date, my Device Manager shows two active drives and works correctly, I use service pack 2 and I have installed a new software/hardware. my computer is a dell XPS 420 that is now three years old and this is the first time that I had any problem that I have not been able to solve. Help!

  Hello

  Its not unusual for the same problem have an impact on both drives, in fact its very common.

  Step 1: Please do all the same underneath if you did some before as is often total
  a process that solves the problem.

  Try this - Panel - Device Manager - CD/DVD - double click on the device - driver tab.
  Click on update drivers (this will probably do nothing) - RIGHT click ON the drive - uninstall.
  RESTART this will refresh the default driver stack. Even if the reader does not appear to continue
  below.
  
  Then, work your way through these - don't forget the drive might be bad, could be a coward
  cable or slight corrosion on the contacts (usually for a laptop) and other issues.

  Your CD or DVD drive is missing or is not recognized by Windows or other programs
  http://support.microsoft.com/kb/314060 - a Mr Fixit

  Try this fix manually if the Fixit 314060 does not work
  http://www.pchell.com/hardware/cd_drive_error_code_39.shtml

  Your CD or DVD drive is missing or is not recognized by Windows or other programs-
  a Mr Fixit
  http://support.Microsoft.com/kb/982116

  The CD drive or the DVD drive does not work as expected on a computer that you upgraded to
  for Windows Vista
  http://support.Microsoft.com/kb/929461

  When you insert a CD or a DVD, Windows Vista may not recognize the disc
  http://support.Microsoft.com/kb/939052

  Your CD or DVD drive cannot read or write media - A Mr Fixit
  http://support.Microsoft.com/GP/cd_dvd_drive_problems

  CD/DVD drive does not appear in Windows Vista, or you receive this error in Windows
  Vista installation after booting from the DVD (AHCI)
  http://support.Microsoft.com/kb/952951
  Drive CD - R or CD - RW Drive is not recognized as a recordable device
  http://support.Microsoft.com/kb/316529/

  Hardware devices not detected or not working - A Mr Fixit
  http://support.Microsoft.com/GP/hardware_device_problems

  Another possibility is that the cables are loose. Remove ALL power, then make sure that the cables in both
  ends. Remove and replace, do not just tight. For laptops, you can often clean power and
  contacts data with a pencil eraser.

  Some DVD players do not use the Windows default drivers so check with the manufacturer of system and
  manufacturer of device to see if there is a firmware or drivers for your drive if necessary.

  ===============================

  Step 2: You have disc problems as the CD/DVD is actually 4 discs in 1 case (CD & DVD
  Burn and CD and DVD read). So it is not unusual for 1 or 2 operational so that other parts
  do it right.

  Did you follow the Troubleshooting Guide for the reader who still does not work? There are
  the entries in registry that the troubleshooter does not solve and those who "might" be the cause.

  Check with your Maker system and a device for the two possible firmware updates and
  the correct registry entries for your car.

  Here are the keys that I of course are those in question - for the subkeys of the CD/DVD drive
  as there will be other subkeys in these keys. Do not forget to ask specific keys involved as well as
  the parameters.

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Hardware Profiles\0001\System\CurrentControlSet\Enum\IDE

  HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ {4D36E965-E325-11CE-BFC1-08002BE10318}

  -----------------------------------------------------------------------

  You can probably find more info here and maybe even the exact registry for your CD/DVD settings
  drive from someone with the same model.

  Forums - a lot of expert real help
  http://Club.myce.com/

  CD/DVD units
  http://www.myce.com/storage/

  Use DevManView to locate the CD/DVD in the registry (be careful and do a prior Restore Point)
  nothing change) - find the DevManView device and then make a right click on it free in RegEdit.

  DevManView - free - an alternative to the standard Windows Device Manager, which displays all the
  devices and their properties in flat table, instead of the tree viewer
  http://www.NirSoft.NET/utils/device_manager_view.html

  I hope this helps and happy holidays!

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.