ThinkPad Mini Dock Plus Series 3 vs. ThinkPad Mini Dock Series 3

Similar Questions

• Audio input/output ports Thinkpad Mini Dock Plus Series 3 with inactive W520

  I have 3 laptops W520 and 3 Thinkpad Mini Dock Plus Series 3 docks. The audio 1/8 "output audio and MIC ports are not detected by Windows. In the sound settings, the high definition Audio Device is always disconnected. I read that there was a problem with background sound via ports audio on an earlier execution of these docks, but the production on these date are all 11/07 (after Lenovo solved the problem). Someone had a similar problem? The ports are inactive for the W520 by design?

  Solution:... drivers. Should have checked that first. I thought that our support office would have done that. I thought wrong.

• Triple monitors with Thinkpad Mini Dock Plus Series 3 T520

  Hello

  I have Lenovo T520 with home Mini Dock Plus Series 3 station.

  I would like to connect three monitors, that is, two dviports and thirdly, one is the T520 monitor.

  I updated my video driver for Interl (R) Graphics 3000 Driver.

  When I try to run the NVIDIA Graphicdriver, I got a message error "the graphics driver is not compatible with the graphics hardware. I tried to find a solution on Lenovo forum

  http://forums.Lenovo.com/T5/options-Accessories/mini-dock-plus-series-3-with-triple-monitors/TD-p/57...

  It says that I need to enable Optimus in the system.

  I can't understand what he found where I can activate Optimus?

  You guys have any suggestions as to how I can put it up using two DVI ports instead of use the vga?

  Kind regards

  Thank you all guys.

  While constantly looking for a solution to extend the number of monitor. I managed to find a solution. Today, I had "I - TEC USB 2.0 graphics video card" and he connected with one of the USB port. It works very well and I am also pleased with the video quality. I can separately used the third monitor. It is also possible to share the display between the second and the third screen.

  Concerning

• T420s + Mini Dock Plus Series 3 with USB 3.0 90W - USB 3.0 works as USB 2.0

  Greetings!

  I'm probably not the first person who cares, but I did not find the same topic in the forum.

  I have T420s Lenovo ThinkPad Mini Dock Plus Series 3 with USB 3.0 plugged 90W. The problem, I USB 3.0 port on the dock (blue) work in USB 2.0. The port of the laptop works very well. I check it by plugging Seagate drive HARD mobile - when the HARD drive is plugged into the port blue station dock Windows (7, 64-bit) complains "device can run faster", using the port laptop does not trigger the message.

  USB 3.0 is installed.

  BIOS version is 1.37.

  Drivers Intel Chipset are updated.

  Device Manager displays the connection as a chain of two "Generic USB Hub, if the HARD drive is connected to the laptop port its chain of" Renesas Electronics USB 3.0 blah - blah ".»

  Help, please! If this combination is not supported, please point to the corresponding link.

  Thank you!

  USB 3.0 port on the dock is not supported on the T420s, it is supported only on T430s and later versions.

  http://support.Lenovo.com/en_US/detail.page?LegacyDocID=ACCS-Guide

  It allows to find the document listed in the link.

  I have the T420s and T430s with this docking station.

• X 220 + mini Dock Plus Series 3 no = no eSATA

  Hello!

  Today, I tried to use the eSATA connection on my Mini Dock Plus Series 3 with my X 220 (4290-W1B). According to the users manual, it should work and that there should be an option to toggle the eSATA connection in BIOS-> Security-> access to the Port of IO. But isn't! The dock would be defective?

  Of course, it is, as stated in the manual user and by many users themselves.

  in any case: Solution:

  1. step: Activate HDD/Ultrabay option in BIOS

  2 step: Use a disk external DRIVE with separate power supply, as the eSATA on the dock connection is _not_ powered!

• Lenovo T410s and Mini Dock Plus Series 3 with 2 monitors DVI, white screen during the boot process

  Hello

  I'm having a problem with the configuration of my lenovo thinkpad T410s.

  I have connected two 19' DVI monitors for the docking station, but during the startup process, I get no output on screens.

  After loading Windows 7, the windows login screen.

  In the BIOS all the graphics preferences are being "switchable graphics", because I also use it on business trips.

  Does anyone have an idea how to solve this problem?

  Thank you!

  Michael

  
  

• DesignJet 1000 Plus Series: JetDirect 680n (wireless) & DesignJet 1000 Plus - what is the required minimum firmware revision?

  For JetDirect 680n (wireless) & more / 1055CM DesignJet 1050c more - what is the minimum required for a 1050c or 1055 CM firmware revision more? I guess that at least a minimum of a certain firmware revision is necessary. Thinking about doing a JD 680n wireless connection.

  I suppose that it would work with A.52.02 (PS or RTL) firmware revision but she would work with A.52.01 ch (1055 CM Plus) I have?  and A.02.10 RTL (1050c more) I have?

  Thank you.

  Version of the firmware should not matter.  See the link below for a list of compatible printers.

  http://h20564.www2.HP.com/hpsc/doc/public/display?docid=emr_na-bpj07274

• USB Ports dead after undocking and anchor W510 in Minidock Plus series 3

  Hello

  just a new W510 (Win XP 32) for a user customized and installed it on his desk. Everything worked fine except for one thing.

  I start the NB in the Docking Station with an external keyboard and mouse (original IBM/Lenovo) attached.

  Works very well.

  Then I disconnect the laptop (there is no button or menu entry for disconnection, it is enough to press the button to eject the NB).

  Laptop still works fine.

  Now, I put the NB in the dock. External LCD display shows regular office but external keyboard and mouse no longer works. The mouse didn't even power (no lights).

  I checked all USB ports--> dead.

  If I plug the mouse or the keyboard to the usb port of the NB they get power, but do not work.

  If I reboot the NB, all is well again.

  Do I have to install a special plug-ins to allow equipment nd "reconnect"?

  Thank you

  Concerning

  Mith

  just visited the user and checked the NB again.

  Guess what happened? Disconnect and reconnect worked.

  It is not that I did not wait long enough to install all the drivers for the last time.

• Colors to Pantone Plus Series missing in Illustrator CC

  I'm trying to find a color in Illustrator CC I chose in my book of Pantone Solid Coated series more, but the color and (many) are not set up in the search. The color in question is 2450c. Any ideas as to why some of these colors are maybe not accessible?

  You update the color Manager to get the latest libraries, then select the library and use the file > export in the color Manager.

  That's all. If the color is not there, then it isn't as you can while other that demand Pantone.

• HP Photosmart plus series B209: could not find the usb port to connect to my laptop where to find no. on this this small opening.

  Please help, I am trying to set up wireless and can not find the place to put the usb cable to the printer. Thank you!

  Very appreciated, classified into usb!

• What suport dock t400 (builtin DVI port 2) now?

  I find that advanced Mini Dock is a choice. but there just 1 VGA and 1 DVI,

  and a new dock support only T400s ThinkPad Mini Dock Plus Series 3 and others who have 2 DVI ports.

  and the ThinkPad Mini Dock Plus Series 3 for mobile workstations don't support T400s T410s, T500s, T510s.

  Are there any other built-in docks 2 DVI port using T400?

  Why those advanced dock do not support the T400?

  Thank you

  Hi yetchen,

  Welcome to the forum of Lenovo!

  Another option, in addition to the advanced dock + pci express videocard samira mentioned above, is an adapter USB-to-DVI and Lenovo.

  Best regards

  Frank

• Ultra Dock is Compatible with the standard T530?

  I wonder if the Dock Ultra really does not support any laptop any more. I have a T530 with Optimus graphics. I had a dock Mini Series 3 (pre - USB 3.0) for about 2 years and am looking for a get a dock for another office, I often use. Lenovo sells directly over the Mini plus series 3 ones. I have 2 years of warranty, but Lenovo will not sell a dock for it? This is why I think the Dock Ultra can take care of the older laptops. In addition, some sites say the new are replacements for the "old" and Lenovo to talk about how they are smaller than the Mini Series 3 (but if they were they option only for your model, then why this question?).

  So I would like to hear from someone who has tried or has less physically T530 or similar compared to a new series to see if the docking connector is different. It would be ideal for a person of Lenovo to also be able to answer this question directly (and not seem as they are simply read the data sheet, what I can do).

  Thank you.

  The ultradock dock connector is different to the connector dock series 3. If they are not compatible. Not only the size of the connector are also different, internal wiring and the shape is also different.

• T410s: DVI/DP on the dock only with discreet/Optimus graphics?

  Hello

  I have a T410s/w switchable graphics. Recently I have disabled graphics from NVidia (since it seems to be fried, but that's another story). Now, with the race on "integrated graphics", I can't use my dock (black screen) DP/DVI connectors, only VGA or the DP on the laptop itself works. -What is that supposed to be this way?

  So, I worked through the same issue on my fleet of T410s I built my own image of the base from scratch, so I had to take a few additional steps.

  Because you seem to think your graphics from nVidia or Optimus chips are fried, you need to get that fixed or looked at by a Lenovo technology before you continue.

  The T410s is going through its digital video signals the optimus nVidia chip and map of 3100 m discrete NVS. You must have the correct driver installed for the NVS 3100 M (update of windows treats it as a Standard VGA controller, I had to download the driver directly from nVidia)

  Then go into your bios and enable the nVidia Optimus as a display device.  It's the default "out of the box.
  Thus, by default out of the box, switchable graphics option of bios is disabled.

  Once you have configured these options, preventing any malfunction of hardware you have, video output digital will work on the Mini Dock Plus Series 3.

• Have you RME 4.3.2 have plan to support switches 2960-plus?

  Hi all

  Our client already replace 2960-plus series instead of the old 2960 switch but I found RME4.3.2 not yet supported to date.

  Nobody knew RME 4.3.2 intend to support switches 2960-plus?

  Thank you and best regards,

  Although the new support of device is sometimes worn with packets of main defence forces, for the inventory feature, SWIMMING and config device management package is a must.

  As Cisco 2960 has published more than devices in 2013, when updates to LMS 3.x was almost stopped, we started LMS 4.2 devices from media.

  However it doesn't show anything on the list of peripheral pages supported, which was filed as a default for this document:

  CSCul91548    LMS 4.2 - C2960 more switches are missing on supported devices page

  You will need to upgrade to 4.2 LMS from to get these managed switches.

  -Thank you

  Vinod

  ** Encourage contributors. RATE besoin.* * 

• Where are the SERIES of MORE than PANTONE in InDesign CC?

  Hello everyone,

  I am a new user of InDesign CC. With it, our company traded on the new PANTONE Plus series. Unfortunately, I'm not able to find the colors added - so should I download them anywhere? Or what I am doing wrong?

  Thank you very much for your help appreciated & best greetings from Switzerland,

  Axl

  axlzed wrote:

  So if I understand, I just need to export it as a LABORATORY and ca-Ching! -J' got a color pressing plants won't complain that I use LAB and PANTONE in one file?

  If they are printed with real tones, Yes. The color model used to represent the inks on screen (which the LAB is better) makes no difference in ink on the press. If they will be converted to CMYK downstream, it is possible the RIP may need to be developed to deal with incoming tasks in a particular way.