ThinkPad R51e memory compatibility issue

Similar Questions

• HP Pavilion 15-N019wm: RAM memory compatibility issues

  So, I added another 4 GB of RAM in my Pavilion (model 15-n019wm) and now have a total of 8 GB. One of the sticks is a Kingston 4 GB supplied with my HP... the other is a 4 GB Samsung that came out a Lenovo.
  I think they have the same characteristics completely in all areas (1.35v, 12800 1600 Mhz, etc..)
  When using CPUID-Z, I noticed my calendar freqs were a bit high (IMHO) with a reading of 11-11-11-26... But if they should not be closer to 9-9-9-24? Also, I would appreciate it if someone could tell me if I can go into my BIOS and adjust them at the time or is this kind of mobo that is locked? Thank you in advance for your time and your help in this matter!

  Respectfully, Ron

  ronnieron wrote:
  So, I added another 4 GB of RAM in my Pavilion (model 15-n019wm) and now have a total of 8 GB. One of the sticks is a Kingston 4 GB supplied with my HP... the other is a 4 GB Samsung that came out a Lenovo.
  I think they have the same characteristics completely in all areas (1.35v, 12800 1600 Mhz, etc..)
  When using CPUID-Z, I noticed my calendar freqs were a bit high (IMHO) with a reading of 11-11-11-26... But if they should not be closer to 9-9-9-24? Also, I would appreciate it if someone could tell me if I can go into my BIOS and adjust them at the time or is this kind of mobo that is locked? Thank you in advance for your time and your help in this matter!

  Respectfully, Ron

  Unfortunately, it is not a good way to upgrade the memory. Your system will be unstable. You will not be able to set the memory timings. This isn't a passionate we can twist trimings native and secondary and motherboard bus speed on.

  If you do things, you need to replace the two modules with compatible memory modules guarantee a memory well known manufacturer guarantee the manufacturer and the seller will be compatible. Make another way, including the method you used are a shot in the water. You were lucky that Notepad starts even in Windows.

• Cassette Mate compatibility issue

  Cassette Mate compatibility issue

  I used the TAPE MATE with Windows XP (it's a bunch of concerto to MP£ 3), it is declared compatible with Windows Vista and 7

  Now, I have a thinkpad from lenovo with Windows 8, and it does not work.

  It is installed but it doesn't work. He opens his window as usual, but it does not start recording.

  Thank you

  Hello

  Compatibility is the responsibility of the software/hardware developer.

  If system requirements doesn't mention Windows 8, you will need to contact the developer of this assistance program.

  Concerning

• Satellite M70 with Vista - TCtrlIOHook.exe is blocked due to compatibility issues

  Hi guys,.

  Hoping I can pick your brain. I have the Satellite M70 and have (I think) installed most of the new drivers for Vista... but when I boot up I get "this program is blocked to compatibility issues" blah blah blah..., then says that he has

  Toshiba utility programs
  Publisher Toshiba
  Location C:\windows\system32\TCtrlIOHook.exe

  Can anyone of you tell me please
  one) where I can get a driver to solve this,
  (b) stop this message that appears whenever I start

  Thank you

  Kian

  Hello

  The TCtrlIOHook.exe belongs to the TOSHIBA Hotkey Utility control.
  All this FN keys needs to control the software and TOSHIBA Hotkey Utility is necessary if you want to use the function of the FN keys.

  (A) If you didn t find these utility for Vista on the Toshiba page then it seems that Toshiba don't provide this software for Vista for the M70 laptops.

  (b) If you want to stop the message appearing at the beginning of the boot process, you must remove it from the OS or you will prevent loading software!
  This can be done in the registry. You can remove entries from the RACE
  EntVersion entVersion\Run

• I'm unable to access webmail on TalkTalk (formerly Tiscali) using Firefox 5.0 and TalkTalk tell me there is a compatibility issue?

  I have not had any problems with my previous version of Firefox and I can access my Tiscali/TalkTalk webmail using the latest IE browser. I am connect but cannot access the contents of the mailbox. I asked TalkTalk on the problem they have stated that "If you are unable to access the mailbox using Firefox version 5, so I want to inform you that there is compatibility issue with Firefox version 5 and webmail of Talk Talk, thanks to which you found the error above. Alternatively, you can try to uninstall the latest version of firefox, and then reinstall the earlier version to settle the case. "Can I assume that these difficulties will be resolved between you? I would prefer to use Firefox and do not wish to go back to IE.

  Apparently, TalkTalk mail will work with Firefox 4 and 5 of Firefox If you set the browser are to TalkTalk mail saying that you always use version 3.6.

  You can find instructions for this in a post on the forums of TalkTalk: Firefox 4 & TalkTalk webmail - Forums.

  Note: when you open about: config the first time, it will display a warning message that you have to be careful with changes that you make. It's certainly good to keep in mind.

  It work?

• Satellite L735-S3220RD - 1600 Hyperx memory compatibility

  IM thinking improve my memory of laptops at 1600, I want to make sure if its compatibile with kingstone hyperx 1600 mhz models. Part number: KHX1600C9S3P1K2 / 8G

  My laptop is Satellite L735-S3220RD with 6 GB memory DDR3 1333... Corei5 processor chipset n are the two SANDY BRIDGE.

  I would really appreciate if someone can give me a feedback and check if it will be compatible with this model to run at the speed of 1600?

  Thanks in advance.

  Hello

  Check please the list of modules of memory compatibility on the Kingston site directly.

• Windows 10 compatibility issue (IdeaPad Z510)

  Hello

  Compatibility issue tracker Windows 10 says that I meet problems with:

  • Bluetooth audio
  • Bluetooth AVRCP (Qualcomm-Atheros Communications) device
  • Support Bluetooth virtual (Qualcomm Atheros Communications)
  • LWFLT Bluetooth Device (Qualcomm-Atheros Communications)
  • Replacement cable Server Bluetooth Hadr copy (Qualcomm Atheros Communications)
  • Bluetooth Server (Intel Corporation)

  Receive updated drivers?

  See you soon,.

  Yann

  yannbrrd wrote:

  Hello

  Compatibility issue tracker Windows 10 says that I meet problems with:

  • Bluetooth audio
  • Bluetooth AVRCP (Qualcomm-Atheros Communications) device
  • Support Bluetooth virtual (Qualcomm Atheros Communications)
  • LWFLT Bluetooth Device (Qualcomm-Atheros Communications)
  • Replacement cable Server Bluetooth Hadr copy (Qualcomm Atheros Communications)
  • Bluetooth Server (Intel Corporation)

  Receive updated drivers?

  See you soon,.

  Yann

  I think that the trend with Microsoft, is that it will strive to offer its own drivers for your unit.

• CAN the c series modules and drivers XNET and Ethernet expansion chassis cRIO compatibility issues

  Hello

  I encountered a problem with my current setup which was not picked up by the tool advise cRIO or by the engineer of applications OR that we used to check our configuration before starting the project.  It turns out that the NI 9853 CAN modules require a XNET driver that is not compatible with the NI 9149 expansion chassis.

  We currently have a system with a cRIO NI 9068 with general IO and some CAN controller and CAN open modules in a carrycot and an Ethernet NI9149 with more general IO expansion chassis and more CAN and CAN open an another pod remote modules and all of this should work under water, so I can not move the modules of the expansion chassis to the chassis controller without a lot of overhaul of the system and equip and a team of angry engineers and technicians.

  I have developed the FPGA code for the 9068 OR and have CAN and CAN open networks works with happiness.  Then I tried to copy the same FPGA code on the expansion chassis and it compiles, but when I try to launch it I get the error-63184 code.  After long calls OR support, and tries to install the missing drivers on the expansion chassis, we discovered that XNET is not compatible with this chassis.

  Can anyone suggest the best course of action?  Is there an expansion chassis Ethernet that will support XNET?  I have here no information online about this compatibility issue that I can't find?

  I'll be communication with DIRECTLY, but from previous experience of the "odd" questions, I know the community often hold the key.  Any suggestions gratefully received.

  Thank you, Ed

  It's official.  CAN open modules are not compatible with the expansion chassis.  I have them moved to RIO and will get the upgraded pods.

  Thank you

  Ed

• When installing ha6 on windows server 2008 R2 compatibility issue

  Hi, I want to install Virtual Studio 6 on windows server 2008 R2 (to run our legacy code). I encountered the problem of compatibility: "virtual studio has a compatibility issue with this version of windows.

  I tried the steps below:
  1. right click on "setup.exe" and select "Run as Administrator"
  2. run in compatibility mode, such as windows XP sp2.
  It does not, someone who can help on this? Thank you!

  Hi Weihe,

  The question you have posted is related to the Virtual Studio 6 installation on windows server 2008 R2 and it would be better suited to the TechNet community.

  Please visit the link below to find a community that will provide the support you want. http://social.technet.Microsoft.com/forums/en-us/windowsserver2008r2general/threads

  Hope it will be useful.

• ENVY of HP dv7 Notebook PC: Windows 10 compatibility issues

  I want to be the new operating system Windows 10. Apparently, this is going to be a compatibility issue with my laptop. I have the AMD Radeon HD 7640 G graphic card. It seems that Windows 10 do not like it. How can I fix this problem before the release date in July? Thank you.

  This is a preliminary read Microsoft and won't say there are problems that can be supported with the official version.  Just be sure that you have the most recent driver for now.

  Win 10 drivers will be released by the factory eventually so keep not prevent you to Win 10.

• DLA blocked due to compatibility issues

  DLA blocked due to compatibility issues

  How does this relate to the functionality of windows update

• VI compatibility issue

  Good evening everyone,

  I recently worked on labview 2011 and this morning my laptop crashed! fortunaltely I kept my job vi on external hard drive

  the problem is that the laptop I'm working on that now has labview 2010 version installed so my vi did not (compatibility issue)

  i'would always be greatfull if someone who has the version of labview 2011 could open my vi and save it with the 2010 version and send it to me.

  Kind regards.

  PS attached below the main vi ' final series UART Frid "with two sub vi" read part & write the part. "

  You can go there.

  Hmm... Let me know if you get any problems. In addition, there is a thread separate available for this conversion VI. Next time post your VI in this thread, if you want that all conversions.

• Hotfix v upgrade for the compatibility issue for epowertray?

  A solution was published after the problem of compatibility below message appeared on 13/03/2013.  My laptop don't is not on the list was updated 'solution' suggests a fix provided instead of an update.  A fix is safe and reliable as a real update?  Thank you.

  This program has known compatibility issues

  Check online if solutions are available from the Microsoft Web site. If there are solutions that Windows automatically displays a site that lists the steps you can take.

  Acer Updater program

  Acer embedded editor

  Location c:\Program Acer ePower Management\ePower Tray.exe

  Update Acer has a compatibility issue with this version of Windows. For a compatible with this version of Windows Update, please contact Acer Incorporated.

  OK, posted this question too early.  I have seen another post where Acer has said to go ahead and use the fix.  Download now. Never mind.  Thank you.

• I just bought a new LG monitor. Photos open in Microsoft Live Photo are green. Is there a compatibility issue?

  I wonder if there are some compatibility issues with monitors LG and Microsoft Live Photo Gallery?  One of my photos that I opened with Photo Gallery is all green.  LG assured me that it is not the monitor.  I opened a couple of other photo programs and photos look good on those.  I use Microsoft Photo Gallery most of the time, and it's embarrassing.  Anyone have any ideas?

  Run Microsoft Fixit

  Microsoft has a range of automatic programs to solve common problems. For Windows Photo Gallery, see problems

  http://support.Microsoft.com/mats/windows_photo_and_slideshow_diag/en-us

  For the visit of the list the most comprehensive

  http://support.Microsoft.com/FixIt/en-us

  When you choose to download, choose the option to run on another computer. You can then save it to a folder on your hard drive. Open the folder, open the folder fix this laptop and run Run Fix It. It will contain all 27 FixIt.

• I have Windows Vista on My Toshiba Satellite Harman/Kardon and Diablo 2 has compatibility issues

  I bought diablo 2 and I installed it on my computer and now I can't play because he says that the game has compatibility issues and I have tried all the recommended solutions and I always feel the question

  Hey Joe,

  Thanks for posting your query in Microsoft Community!

  I understand from the description of the issue, that you have problems to play Diablo 2. I will definitely help you with this problem.

  (1) what are the troubleshooting steps you performed for this problem?

  (2) have you made changes on the computer before this problem?

  (3) do you get an error message when you play the game?

  Method 1: I suggest you try to install the game Diablo-2 in Windows XP compatibility mode and check if it helps.

  Make older programs in this version of Windows

  http://Windows.Microsoft.com/en-us/Windows-Vista/make-older-programs-run-in-this-version-of-Windows

  Method 2: If the problem persists, I suggest you to place the computer in clean boot mode and check if the problem persists.
  A clean boot to check if startup item or services to third-party application is causing this issue.
  You can read the following article to configure the computer to boot:
  http://support.Microsoft.com/kb/929135
  Note: After the troubleshooting steps, see step 3 of the link to clean boot the computer to a normal startup mode.

  I hope this helps. Try the above steps and get back to us for assistance with the requested information. We will be happy to help you.