ThinkPad S230u wake after sleep of TSRI since BIOS update

Similar Questions

• 10.6.8 PowerMac G5 Mac wake after sleep

  10.6.8 PowerMac G5 Mac wake after sleep

  You either do not have a PowerMac G5 if it executes 10.6.8 or your PowerMac G5 does not run 10.6.8. The PowerMac G5 is not able to run Snow Leopard 10.6.8. It is only capable of running OS X Leopard 10.5.8.

  Please correct your information so it was can help you.

• EliteBook 8740w wake after sleep

  Hi all

  I bought laptop HP EliteBook 8740w

  I have several problems...

  Thus,.

  Configuration:

  (i5-520M, 4 GB, 320 HARD drive ATI 7820 M)

  OS - preinstalled Windows 7 Prof 64 bit

  All windows updates and the latest drivers for the chipset, video and so forth have been installed.

  1. computer laptop doesn't wake up after the mode 'sleep', i.e. all coolers start working really hard and LEDs are burning bright, but leaves black screen (5, 10, and several minutes, but no progress)

  I assumed problem with the BIOS, I have BIOS F.03 28.04.2010 but worm real version is F.09

  I went to the HP support and downloaded the latest site.

  But I can't update BIOS!

  If I use HPQFlash.exe program, he said: "after the operating system restarts, BIOS will be updated", but after restarting the BIOS operating system has old version

  If I use the options - key USB system after formatting and copying files (I checked the files on the flush), but when I try to load OS from hard Ras (after restart of ESC, F9), I see error - this disc is not system drive has chosen another, or something like that

  I tried at least trees different readers RAS, and always had the same result.

  I even downloaded bios f.08 version, but the same situation too.

  So, I try to summarize the problems

  1. computer laptop is not wake up after fashion 'sleep'

  2. it is not able to update BIOS

  3. What's wrong with loading PC from a USB...

  Is any body could help me... pleeeeeeze

  To solve the problem with the sleep mode, need update Intel management engine complete

  I've downloaded firmware from here http://h20000.www2.hp.com/bizsupport/TechSupport/SoftwareDescription.jsp?lang=en&cc=us&prodTypeId=321957&prodSeriesId=4138087&prodNameId=4137878&swEnvOID=4059&swLang=13&mode=2&taskId=135&swItem=ob-85374-1

  waking up after sleep works now!

  BTW

  about boot from USB, I tested the USB hard disk - it worked properly...

  but the boot of steel hunting impossible...

  and the BIOS is not updated either...

• Black screen on Macbook - don't wake after sleep

  I have a model mid-2009 13 "Macbook Pro which is been updated for the last OS. For the last two weeks, I had problems make him wake up once he starts in mode 'sleep'. It seems not important whether she goes to sleep because of the closure of the lid or inactivity, and it seems not important to know if she was in mode 'sleep' for a few hours or just enter the mode 'sleep'. I try to wake up by pressing a button, and the screen remains black. I finally have to press and hold the power button until I hear it powering down and then press the power button to turn it back on. Can I get the nice message that said "you shut down your computer because of a problem" when it loads up.

  I know that the device is on when the screen is black because it makes the noise to stop when I am forced to stop it manually. And whenever he refuses to wake up from the black screen, there a lot of battery when it finally loads up after that I turned it off. If he pulled when he falls asleep, plug the charger when it does not react with the black screen does nothing no more. And this isn't a case of the lighting of the screen being turned all the way down - I've tried too, just to be sure.

  I'd appreciate really any suggestion or help, because I have no idea what to do. He just started to happen suddenly, and since he started it happens almost every time my computer will sleep, what is super frustrating. I don't have not download anything new or modifications to the right until it all started, and it started before I've updated to El Capitan and continued since then, so I really don't know what the deal is...

  If your Mac does not sleep or wake up when expected - Apple supports

• Re: Portege R700 not wake after sleep

  Hi all
  I just bought a R700 and the laptop doesn't wake up after going to sleep. I did a bios upgrade. I have all the power options to sleep to "never" at the present time and other options of hibernation which works very well.
  I'm a little worried because I have to make the software updates for sensitive equipment during a couple of them the R700 is stopped and I had to do a power of the force down.

  When he tries to get out, sleep, the screen remains blank and the on-ramps fan until takeoff speed and stays there until I have to force a shutdown.

  Any ideas?

  I uninstalled tempro when I searched a driver that he has not found any so searched manually updated and found a few. Waste of time and interefering.

  Hello

  Have you noticed this problem from the day or later after the installation of these updates?
  > I'm a little worried because I have to do software updates...
  No one forcing you to make updates. You need to install are updated Microsoft.
  If the system works well with the original recovery image Toshiba (factory settings) leaves.

  The only thing you should do is to optimize BONE and remove the stuff you don't need.

  Back to your question:
  Can you confirm that this problem occurs with the factory settings and without any installation of updates?

• HP pavilion n 204 tx: unable to wake after sleep in window 10

  I downloaded windows 10 yesterday and everything seems to work properly. However, whenever I SLEEP my computer, it is supposed to go to mode "Eve" where a twitch of the mouse wakes you up there. He goes to sleep, but I can't wake up through any interaction with the mouse or the keyboard. The light is still on, indicating that the computer is in sleep, but I can't seem to wake up. I had to hold the power button to turn it on then and I'm sure it's terrible that my computer turns off does not correctly. Everything was fine while I had windows 8.

  Any help would be appreciated!

  Hello @deepak9758,

  Welcome to the Forums of HP Support!

  I understand that you are having a problem of sleep mode and that he wanted to help you!

  For starters, can you provide me with the product number of the laptop?  Here is a link that you can use that will help you find your model and product number:

  How can I find my model number or product number?

  In the meantime, try to review the next steps, posted by Member of the DanG82community:

  1. Download version 9 or 10 of the Intel Management Engine Interface (MEI) driver.
  2. Browse HP Software and Driver Downloads of the site (http://www8.hp.com/us/en/drivers.html) to find the latest driver approved for your model. Filtrer filter by version, select Microsoft Windows 8.1 on the menu drop-down. Find the download in the category 'Driver-Chipset' If a pilot of MEI with a version from 9 or 10 number is listed, download. [9.5.24.1790 version 1.5 M (http://ftp.hp.com/pub/softpaq/sp66001-66500/sp66228.exe) works for most models.]
  3. If a pilot of MEI with a version from 9 or 10 number is NOT listed, download the appropriate driver directly from Intel (https://downloadcenter.intel.com/search?keyword=intel+management+engine). [9.5.24.1790 version 1.5 M (https://downloadcenter.intel.com/download/23091/Intel-ME-9-Management-Engine-Driver-for-Intel-NUC) works for most models.]
  4. Download the Package troubleshooting tool Windows 10 "show or hide updates" (http://download.microsoft.com/download/F/2/2/F22D5FDB-59CD-4275-8C95-1BE17BF70B21/wushowhide.diagcab).
  5. Change the Windows Update Services automatic (delayed start) parameter to the manual.
  6. In Control Panel, select administrative tools, and open Services.
  7. Go to Windows Update and double-click it to view its properties.
  8. Click on stop to stop the service to run.
  9. Change the Startup Type to manual, and then click OK.
  10. Install version 9 or 10 of the Intel Management Engine Interface (MEI) driver. If you receive a warning dialog box about the replacement of a newer version of the software, accept it.
  11. NOTE: You don't need to uninstall version 11 before installing version 9 or 10. The presence of a version of the driver is required to 'upgrade' (or demote in this case).
  12. Run the Windows 10 Troubleshooting Package 'Show or hide updates' and hide the updates of the Intel Management Engine Interface (MEI) driver. (This will block your system automatically reinstall or display of updates for version 11 of the pilot).
  13. Change back the setting of Windows Update Services to manual automatic (delayed start).
  14. Restart your computer.
  15. Rejoice!  You can finally sleep and stop again.

  Source: Re: how to solve the problems of Post-Windows 10 upgrade on HP laptops

  Please post back with the results.

  Please let me know if this information helps you solve the problem by marking this message as 'accept as Solution' , this will help others easily find the information they seek.  In addition, by clicking on the Thumbs up below is a great way to say thank you!

  Have a great weekend!

• DV6-7214 dead with PLAYER MSATA C after hp support assistant, new bios update. 18/05/13

  I've postponed an update of the bios, because it makes me nervous. Apparently for good reason.

  Today, I let the horse do the update of bios on my win8 race dv6-7214.

  He said he was doing a system restore point, but that seems to have been unnecessary.

  The laptop has a black screen after an hour of "reboot", so I've turned off.

  Turn on the screen remains black.

  No response to any prerssed keys after power, as the ESC key.

  I have read several messages that need to roll back updates of bios, which does not say much for HP regarding

  that it is a recurring problem.

  I do NOT get a blue screen, getting not nothing at all.

  Is there a way to roll back a short bios to ship to HP?

  I did not write down the version of the bios, just trust it was necessary. Don't let hp support assistant to run anything else.

  I guess that I will uninstall HP support assistant, if I never recover my computer to the point where it can turn on.

  Can not think of a software bug as bad as loaded by hp in my bios.

  Anyone? How do I reset the bios with a completely insensitive laptop?

  Thank you chryig, but none that did not work.

  HP support has sent the same solution.

  The dv6-7214 has an msata slot, which can be configured as C drive, I did with an msata ssd.

  The drive that came with the laptop was in the sata slot, as usual, but was not C drive.

  I found someone announcement the same problem, no black screen, (not blue screen) no error message, just in bricks.

  There is also a disc SSD C.

  I tried to temporarily move the msata on slot sata (with an adapter). This allowed the bios end

  its update.

  So it's not the Bios that is broken, but the software to perform the update to the bios is broken.

  Update (bios) fails if drive C is anywhere but the sata slot (or perhaps the c drive should be drive 0).

  I hope that HP will fix this problem. A lot of laptops HP is sold 'improved' with an extra via disk

  value added reseller. Since there are only 2 slots under that drive C may be in, sata and 1 msata

  should be possible to update the bios software to manage this small number of possibilities.

• Qosmio X 500 - heating problem since BIOS update to 2.9

  Hello

  Yesterday, I update the bios of my version of the qosmio x 500 to 2.9 and since the fan does not quickly when the cpu temperature grow.
  When I for example watching a movie the shutdown of the Pc all of a sudden because the temperature of the cpu go over 100 degrees.

  Can someone help me?
  Thank you
  Sébastien

  Hi smo68170

  Set the BIOS to default settings initially.
  Go to the BIOS (pressing F2), then press F9 for default settings and save the setting by pressing F10.

  As much as I know is not possible to Flash the BIOS again the same version as the BIOS will warn you that you are already using the latest version

  In addition, use the Toshiba page display driver.

• Win 8 crashes at the lock screen after sleep

  I'm currently under 64-bit Windows 8 on my gaming PC and after I wake up from sleep mode, it freezes. I can't find a way to solve this problem on other forums, and it is quite annoying because sometimes it just won't thaw out and I have to restart. It never happened on windows 7 and my computer never froze or crashed into a part any operating system?

  Side-note: this never happened by turning on my computer and the connection
  You can view the event logs in Windows > system and see what has happened.
  Sometimes this can be caused by the poor half-broken HDD drive or (more often with SSDS), where the HDD/SSD does not wake from sleep correctly, the solution is updated to firmware HDD/SSD.
  Also, you should make the: chkdsk C:/F/r, to check and fix the errors on the hard drive.

  If not help, replace your HDD/SSD if possible.

• DELL Inspiron N5110 does not stop and does not wake from sleep

  Hello.

  I have Dell Inspiron N5110, who cannot stop it in Windows 7 or Ubuntu Linux. Specifically, I started Ubuntu Live from CD to eliminate the possibility that the problem is in Windows 7. Stop in Ubuntu does not work either. This proves that the reason for not an application in Windows that remains suspended and does not allow the laptop to close.

  The laptop computer may not wake after sleep or either Hibernate.

  I tried all the solutions that advised you to all the other people in the forum who have the same problem.

  1. the laptop cannot stop mode safe either.

  2 may not stop even after clean boot Mode - all services disabled and all package disabled Startups.

  3. I haven't tried to change the Power Options Advanced "Allow hybrid sleep" - both WE "On AC Power" and "Battery operated" - no change.

  4. I tried to install the latest NVIDIA video drivers. This did not help either.

  5 running only on battery change nothing - not cannot always stop.

  6 race only on AC adapter without battery - still cannot stop.

  7. I tried to remove the AC adapter and the battery, and now the POWER button for 30 seconds to RESET the phone - did not work.

  ATTENTION: I have read your forums all day and has seen at least 10-15 reports on the same problem, and not a single case fixed.

  8. This is why I have not tried Flash the BIOS with the latest version - I have read other people who have tried and it didn't work either.

  9. I loaded the BIOS default settings (F9) - stop still can't.

  NOTE: Change something in the BIOS and getting out once caused the laptop to freeze and I had to power off by holding button for a longer time.

  10. I ran DELL Diagnostics menu Boot (F12 at startup) - no error found.

  11. I couldn't find IEEE 1394 adapter in Device Manager to change the power management settings.

  In fact, none of the suggestions that you can give to change something in Windows is logical because I already mentioned that stop in Ubuntu does not work or the other.

  The question seems to be either in BIOS or a hardware problem. But which component? This is the CD/DVD drive?

  It is a new laptop.

  Please advice how to proceed. If you know which component fails please tell me.

  Remove the keyboard and palmrest (dell guide shows you how) and you should see a small button battery. Remove it at least 10 seconds, then put back. Enter the BIOS and make sure that there is nothing weird was changed. It should work fine now. I had this work in Ubuntu 12.04 these last days with no problems.

• Satellite A60-202 after bad BIOS updated the PC does not work

  Hello

  After a very bad my BIOS update, my PC doesn't work and doesn't turn on.
  What to do now?
  It is Toshiba Satellite A60-202 with 512 MB of memory and 40 GB of HD.
  model PSA60E-OLP06TFR SA60-202

  Thank you

  Yves

  HI Yves,

  Unfortunately, if the BIOS update procedure does not work (or fill), then it is likely that the BIOS in the CMOS chip had been corrupt and without it, you will not be able to boot your laptop to fix the problem.

  It will be necessary to bring (or send) your laptop to a repairer authorized to have reflashed BIOS.

  Kind regards

• The Activation of Windows 8 failed after BIOS update

  I have a HP Pavilion G6 1313AX laptop with windows 7 Home Basic preinstalled on it.
  I've updated that Windows 8 pro with Wizard upgrade of windows 8.
  After that, I did a BIOS update. Then when I restart, the windows that display an error that the product key was used in some other PC.
  Please help me to solve this problem of activation.

  Try the phone activation:

  1. press the Windows key + X , and then clickrun, and then type: slui.exe 4

  2. then press the ENTER"" key.

  3. Select your "country" in the list.

  4. choose the option "activate phone".

  5. stay on the phone (do not select/press all options) and wait for a person to help you with the activation.

  6. explain your problem clearly to the support person.

• Fallout 3 stops working after the computer wakes from sleep

  Since the games for Windows Live 3 is out, Fallout 3 has never been the same. He used to work at best my GfWL and now her nightmare. Recently, after that I quit the game and put my computer to sleep, Fallout 3 will stop working completely after wake up. I try to start it and I get them all is a cursor with a small blue rotating light. What is even more strange, is that my computer goes into a State of semi who no longer meet this point where programs and keyboard shortcuts no longer work, but I can browse my hard drive. I try control + SHIFT + ESC to see what the devil but that causes Windows Explorer to stop working. CTRL + Alt + Delete does not work either. No matter what I try, once I start Fallout 3 after the computer wakes from sleep, I can't do the task to the top manager and I can't use my computer. The only way to get it is to hit the reset button or turn off manually. Can someone please help to get rid of this problem?

  Hi murphy449,

  1. did you of recent changes on the computer?

  2. the problem only happens when you start fallout 3 after the sleep mode?

  3. are you able to wake the computer quits successfully sleep mode?

  4. What is the version of Windows installed on the computer?

  Method 1

  I suggest that you manually download and install the latest drivers for display on the computer card and check if it works.

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows7/update-a-driver-for-hardware-that-isn ' t-work correctly

  Updated a hardware driver that is not working properly

  http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  Method 2

  If the previous step fails then I suggest that you try the clean boot procedure to check whether a third-party program installed on the computer is causing the problem.

  To help resolve the error and other messages, you can start Windows Vista or Windows 7 by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to troubleshoot a problem by performing a clean boot in Windows Vista or in Windows 7

  http://support.Microsoft.com/kb/929135

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  If the previous step fails then I suggest you check the observer after return with details and events for the cause.

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows-Vista/what-information-appears-in-event-logs-Event-Viewer

  What are the information contained in the logs of the event (Event Viewer)?

  http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-Viewer

  I hope this helps!

  Halima S - Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think.

• with 10.11.2, Mac Pro 2013 wakes up not 4 k shows up after sleep as before.

  I installed 10.11.2 today and found that the Mac Pro wakes up not 4 screens connected to the thunderbolt ports k. I tried many kinds of 4 k screens, including u28e590d, u24e590d, p2716q etc., but none of them is waking up after sleep. the only resolution is to disconnect and reconnect the thunderbolt (view port) cable a thunderbolt different port.

  these screens all work perfectly with 10.11 and 10.11.1.

  Steps to reproduce:

  1: having a Mac Pro 2013, configurations and install 10.11.2

  2: Connect a screen 4 k as u28e590d to the thunderbolt port, using mini-displayport cable.

  3: let the Mac Pro sleep

  4: when press a key or click the mouse, the Mac Pro will wake up but the screen won't wake up 4 k.

  everyone knows the same problem?

  Hello.

  same problems here :-(

  MacPro 2013 with the D300

  4 k screens: 28e590d Samsung and Asus PA328Q.

  Can someone help? This problem is very annoying!

  Andi, of the Germany.

• HP 15r205tu: i3 5010u, uncore after sleep and wake up power consumption increases

  After start of the uncore cpu power remains unused 1W (according to the CPUID HWmon) below.

  If you sleep and wake up the laptop, then the uncore power increases to approx. 2W.

  Time remaining on the systray icon is touched by it.

  Navigation on the duration of use of a low-power battery is reduced after sleep wake cycle.

  Is this a known issue? Is there a solution?

  Thanks for the post and suggestions.

  Now, I know what has caused this problem.  I had turned off the network adapter cable into the Device Manager to save energy!

  This caused the uncore somehow to go crazy and pointing up (only after the day before). Now, I have activated the wired lan card and all is well. The laptop can be used for about 9 hours on battery power saving mode now sometimes the loading of web pages.

  Thanks again.

  PS: If any unused pci express port is disabled it can lead to the same behavior.