ThinkPad T400 screen broken

Similar Questions

• L.H.S heat exhaust vent Thinkpad T400 is broken

  Hello world

  I happened to be in a hurry to do something really important, and I wore my laptop too.

  When I was almost a corner of a table, I accidentally hit the Thinkpad on its cutting edge. (oops).

  Then the result was that on the left side,

  vertical bars (for cooling) has been broken.

  Really, I cherish my Thinkpad I really wish she was fixed.

  This can be corrected? or do I have to replace the whole Panel?

  Thank you

  Chris

  I wouldn't worry much; I broke things on my T400 a long time earlier.

• ThinkPad T400 does not start, is turn on below the screen & turning HDD switch off in a loop

  I put my Thinkpad T400 hibernation, but the next morning I couldn't start. When I press the power button, the lights under the screen turn on and I hear the sound of the hard drive and get it out. I don't even see anything on the screen. It is only black. The process continues to repeat in a loop, except if I press the power button to turn off.

  I tried the static load, remove the thing.

  I also removed the hard drive, put it back again, but not working anymore.

  Help, please.

  Solved the problem myself.

  Removed the internal battery and reinstalled after 30 s.

  It worked perfectly. Typing of him now.

• T400 suddenly won't boot beyond the ThinkPad splash screen

  .. .only visible indicator of a problem is that the drive activity light on the bottom of the screen stops ignition etc when the ThinkPad splash screen appears. No bumps in the system, no unusual activity to suggest physical damage to computer laptop or disk - started very well in the morning on the desk, would not restart from the same location on the office after lunch. System also won't start on a bootable system disk (but you can hear the drive access). System is less than one year.

  I solved my problem: Lenovo Service Center for repair under warranty here a diagnosis nor a bad mother and a bad battery, due to abuse of the handling, etc. the computer could suffer (it seemed to be a factory default). No indication as to whether one or the other 'bad' component caused the other to fail. in total 48 hrs to repair, most of the waiting time for a new motherboard coming in the night. No charge to me for what it is. Life goes on.

• ThinkPad t400 not turn on!

  Help!

  I just poured the water on my thinkpad a little water just for fun, but when I turned it on, it does not fuel upward!
  I'm sobbing on this loss.
  I thought that my thinkpad had also the drainage holes.

  Please help, please help!

  Hi all
  IT'S MY EXPERIENCE THAT IS POURING WATER ON MY T400.
  I got to pour the water on purpose on my Thinkpad T400.
  I'm very young but I just removed the four screws of ram and also removed a screw of keyboard as well.
  I opened the lid, and then I removed the touchpad. Then, I also removed the keyboard. I noticed the water entered the cooling fan and I also found water near the Intel Core 2 Duo processor. I also found water near the hard drive and in the custody of the enclosure, so I removed the Panel silver inside the laptop. I also removed the CD player. I let it dry under a FAN (I did not use a hair dryer, as this may damage the components. Then I put everything back up 3 minutes.i lit .he not even turning on, instead, I hear 1 beep, 3 beeps, 3 beeps 1 beep. I surfed on the internet and found that the error means that RAM is not correct or there is a problem. I still once reassembled RAM as it was before (I changed the arrangement before that caused this error).
  Then, to my surprise I saw Thinkpad on screen and the Windows XP operating system started to load!

  I checked if I had connected the keyboard and the mouse properly. Everything was fine.
  I LOVE MY THINKPAD.

  You can use this method, BUT be extremely careful you don't have static electricity.

  Kind regards
  Chris

• New Thinkpad T400 is not start the system

  Hello world

  I received my new Thinkpad T400 a month ago, product ID 2764CT 0. I told my computer to the hibernate after that the battery power is 5% of its capacity. I forgot to put the computer off last night and this morning, when I plugged the power cable has tried to turn on the computer, it wouldn't boot. The screen is completely turned off and would not turn on no, I know that the computer is turned on, because I can feel hot air coming out of the vent in the heat. 'Z' light was turned on, but the computer does not respond. Except for the CD player, no contribution has no effect on the computer.

  Can I call customer service for this problem, or is there a way to fix it myself?

  Thank you.

  iamhaochni wrote:

  Unfortunately, my thinkpad would not even start up. There is no video, and he wouldn't respond to all entries. It has a Z (the Z letter in a circle) light on, but other than that, it doesn't work.

  Seems it's time to get it in service from lenovo, give them a call.

• Lenovo Thinkpad T400 evolution Options

  Hello I have a Lenovo Thinkpad T400 with an Intel Core 2 Duo 2.26 ghz cpu one I was wondering if it was possible to put the processor Intel Core 2 Duo 3.16ghz cpu inside?

  Hi Gilbertb94,

  Welcome to Lenovo Community!

  The processor maximum support for ThinkPad T400 is the Intel Core 2 Duo T9800 (2.93 GHz) processor.

  Please click here for more information about hardware high-gradation.

  I hope this helps. Post if you have any other question!

  Best regards

  Agnes Kumar

• How to upgrade to windows 7 on Thinkpad T400?

  I brought the Thinkpad T400 in 2008, I want to run windows 7. I know that I need to update my BIOS to activate windows 7. I'm going to buy a windows 7 at BestBuy, is it OK?

  can someone tell me the steps? Thank you very much.

  My Thinkpad T400 is CTO of 2764

  Intel Core 2 Duo P8400, 2261 MHz

  ATI Radeon HD3400

  BIOS:

  Version: 7UET43WW (1.13)

  Date: 08/19/2008

  SLIC:

  Version: 2.0

  PubKey: LENOVOTP-7U

  Marker: LENOVOTP-7U

  The SLIC table is only important for Windows pre-installed.

  Buy Win7 and install it on your computer. Activate it on the internet after all the drivers are installed and working properly. After that drag an image of your HARD drive as a backup to an external drive.

• ThinkPad T400 WiMAX mystery!

  I can see in the BIOS there is a WiMAX listed adapter (this is the ThinkPad T400 (2768-AD3)) and on the Lenovo support page / drivers section for the same exact model list: Intel WiMAX 6250 AGN and Intel Wireless 5150 WiMAX, but during the installation of the people, it is said:... .no WiMAX adapter was detected on your computer. It is possible to proceed with the installation, but nothing happens. So I'm a little confused here, she actually WiMAX adapter or does not?

  Some machines shipped with WiMax / it's a snap accessory optional - just like webcam, fingerprint reader, etc. It's just like having the owner of the car of the manual. Even if you have purchased only the base model with a tape recorder there could be instructions for a CD player, CD changer, navigation system.

• T400 is stuck on the Thinkpad splash screen

  No laptop computer 11 months, no problem, I woke to find the computer stuck on the startup screen. I tried to restart, has released the battery, tried pluged, unplugged and continues to stop at the start screen. Any suggestions?

  1. check your USB ports and see if they are damaged or bent pins or pins to touch others.

  http://Forum.Lenovo.com/T5/R-L-series-ThinkPad-Laptops/R400-R500-won-t-boot-past-the-logo-screen/TA-...

• ThinkPad T400 not display after BIOS update

  Hello dear,

  I updated my BIOS via Lenovo BIOS update and everything went successfully and it asked me to restart your computer after the BIOS update and now I don't get any screen, I waited like 10-15 min to see if I can see something and saw it started and I've updated my drivers for win 7 ultimate and when restarting again I don't have no matter what screen and I wait 20 more to see if I get something.  Anyone else facing the same problem here after the BIOS update?

  What should I do guys then, I always let the warranty? Update BIOS removes the guarantee?

  Thanks in advance for your advice

  concerning

  Jan

  Try the solution proposed by Neils, this is the last post:- http://forum.lenovo.com/t5/T400-T500-and-newer-T-series/T500-takes-15-minutes-to-boot-after-bios-upd...

  If this does not work then maybe downgrade the BIOS can help as suggested by wawrzyk:- http://forums.lenovo.com/t5/X-Series-ThinkPad-Laptops/X200-takes-forever-to-boot/m-p/326941#M19656

• "CLIP" SCREEN BROKEN SCREEN NOT VISIBLE

  I just received a Portege 7200 with docking station series. The clip that attaches to the main unit screen is broken and the screen doesn't seem to work. While I can deal with the broken pliers, I was wondering if this will affect why the screen is not working? I only see an image very very dark. Of course, I use an external display, but I was wondering if there is anything I could do to make the screen of the laptop working again. Thanks for any help.

  Hello

  I'm sure that some hardware component is defect. It can be FL inverter or something like that. In my opinion, you should contact the Service partner and let Exchange them. Portege 7200 is portable very nice.

  In my view, it is useful to change it.

• My ThinkPad T400 does not start!

  Honestly, I have no idea what could have caused this!

  I turned it on this morning & it was stuck on the startup screen. It read "ThinkPad" in big letters followed "To interrupt normal startup upward, press the blue ThinkVantage button." Waited about half an hour for him to start & it never did. Of course I pressed the ThinkVantage button & to my dismay... nothing happened. Subsequently, I have unplugged it & removed the battery. I then plugged it back in & tried to start again. Once again, nothing. I unplugged it new & attached to the battery. At this point, I tried to go back to the top and N O T H I N G!

  What should I do?

  Take a look at your usb ports, there could be some sort of pins to touch, as a result of the damaged usb pins.

  ADMIN Edit - link to related in our forum KB Advanced

• T400 screen flashes when power is connected or disconnected

  Hi guys!

  I recently bought a T400. For the moment, it runs on Windows XP, Service Pack 3.

  After the installation of Windows XP, I installed all the drivers concerned and no yellow question mark appear in Device Manager Panel. However, during the process of installing these drivers, now whenever I plug into our remove the AC power plug, the screen turns off for about a second and then comes back.

  This problem was there immediately after the installation of Windows XP and Service Pack 3, that is before installing the drivers. I think it's a particular driver that may have caused this.

  Could someone help me with this? I tried to reinstall the graphics driver.

  Your video card moves the refresh rate when you change the energy sources.

  See your power manager and video card settings - I bet you on battery, you are ready for 50 Hz and AC, you're ready for 60 Hz.

• The T400 screen brightness

  My T400 runs a lot, but I find that I have the brightness of the display mounted as high as possible. Is there another setting of brightness of the screen not to mention that the fn + illuminated keys?
  Maybe in tge to save energy? Or in the system?

  Make sure under the power Option in the control panel under your setting it is complete birgfhtness of power. I used to have this problem worse scenario is to backup and install fees which if done correctly should only take a few hours (like 5