ThinkPad T430 flashes a black screen for 5 seconds when AC plugs In/Out

Hello

Yesterday, I took new model laptop - T430. He flashes a black for 5 secn screen when I have plugins entry/out. The one you suggest if it can be fixed?

I checked the refresh rate. She is set to 50.

Kind regards

Thiru!

Advertisement

Hello

Thanks for your quick response. He is already set to 'Never' as directed by the screenshot that you sent me.

Can you please send me any url to install the graphics drivers as I am new on this?

Kind regards

Thiru!

Tags: ThinkPad Notebooks

Similar Questions

  • In my attempt to get information from IP addresses only Flash on the screen for a second

    When I type in ipconfig on my guest information only flashes on my screen for a second. He's just there.

    Open a first order - instead of typing IPCONFIG in the run box, type CMD instead. Then, type IPCONFIG inside the command prompt box that opens.

  • Black screen for 10 seconds and then lock screen after ios 10

    I am facing a problem where my iphone 6 randomly shows a black screen with a loading circle in the Center for about 10 seconds and then wakes up to the password lock screen.

    Called in support and they mentioned to install ios 10 via itunes instead and a new device settings and do not restore the backup to diagnose the problem.

    Is anyone else having the same problem? Any suggestions that might be faster than the one mentioned by the Apple Support

    Colleague and I have this specific question. Getting really boring. The app I was on lost its place, its similar accidents are happening

  • YouTube load black screen for the first five seconds

    As of the beginning of January 2013 in Firefox, videos YouTube are responsible as empty black screens for the first five seconds. 0:06 mark, video begin to play normally. This isn't a problem in Chrome or IE. Tested with all plug-ins and Add-ons disabled (except Flash player). Plug-ins/add-ons custom updated. Tried to reinstall Firefox without solution. Help? Thank you!

    You can check the problems caused by the recent updates of Flash and try these:

    • disable an eventual extension of the browser for Firefox Plugin RealPlayer Record and if installed RealPlayer update
    • disable the safe_mode in Flash 11.3 and later versions
    • turn off hardware acceleration in the Flash plugin
  • Google search results disappear after flashes on the screen for about one second.

    When using advanced Google search (http://www.google.com/advanced_search), the result will Flash on the screen for about one second, then I don't see that a screen is empty. Pressing 'Enter' again once does not change this white screen. It started there, at the time, that I've upgraded to Firefox 10.0 approximately two days. This problem could be caused by the Firefox update? When I use the Google Search base (https://www.google.com/webhp?hl=en), I don't have this problem. My OS is Windows 7.

    I'm glad to have helped, this thing sometimes works with General problems with Web sites and therefore often worth a try.

  • HP touchsmart 310 screen for 1 second and then black screen

    This is ridiculos, I want to say I can't believe I'm seeing, the pc shut down correctly, next day pc started acting, funny, when turn on, displasy bios screen for a second then goes black forever, trying to solve the problems he me i remove the cmos battery, it does not display black screen just after inserting the cmos battery same problem occurs , pls I need help facilitating the sky of my client a date limit and it's killing time of y. HP pls help...

    to make the light on the screen?

  • Try power upward and he would keep a black screen for a few seconds then turn off and turn on and repeat until I've done a hard stop. I got a message on the svchost.exe

    Original title: help - csvhost.exe and problems to start

    My sons laptop has problems - try to turn on and it would maintain a black screen for a few seconds and then turned off and turn and repeat until I've done a hard stop.  I am able to navigate to the top after repeated attempts.  I could take a quick and complete hard drive test and it passed... Finally, I restored to factory and spent the last 8 hours going through the update process.  It works fine and restart without problems until recently - I followed the instructions to reboot to perform an update, but he had served in the "shutting down" mode for almost an hour I did a firm hard down.  It took a few attempts so he could begin after that, and when I did I had a message on the svchost.exe and thought that might have something to with him... found a site that has a download that is supposed to fix errors and am curious if that is recommended or whether there is another solution or possible make my misfortunes.  The site is: http://www.exe-error-advisor.com/svchost-exe.  I don't know what's happening - the computer works very well when it turns - to be fair, I did also made an update of "HP Total Care Advisor" who has nothing and after I rebooted I could not make it work... "HP Advisor has stopped working"

    Any ideas or advice?

    replied in the other thread

    http://answers.Microsoft.com/en-us/Windows/Forum/Windows_7-system/help-svchostexe-and-problems-booting/cd6ef667-7833-4f34-B976-ffded620a208

  • Start the computer to the top, but before the office back I get a black screen for 5 to 15 minutes long.

    Basically what the title says, "computer starts up, but before the office is up I get a black screen for 5-15 minutes long."

    I don't know the problem, looking it up and this is an annoying problem.

    Hi InterestedLearner,
     
    -Have you done recent changes made to your computer before this problem occurred?
     
    Updated the graphics driver and check if it helps fix the problem.
     
    Visit the manufacturer's Web site to do the same.
     
    Take a look at these items as well for more information on updating a driver:
  • On turning on my laptop that I keep seeing a black screen for about 20 seconds.

    So, I got a few problems of starting time. On turning on my laptop that I keep seeing a black screen for about 20 seconds. Seeing a few forums I have seen that this should not take more than 5 seconds. I have a dell Inspiron 15 3537. Please help. "

    Hello

    Please download CCleaner here and when it is installed, open it, appointment on the 'clean' tab, leave all the boxes even and click run while cleaning.

    When you have done this, go to the 'Tools' tab, select uninstall and bottom right, select Save to text file, select a file name for it, and then open the saved document. Send the contents of it in your next reply.

    It is possible that it is caused by corrupted files. You can try to run the System File Check to check (and challenge!) corrupted files.

    Use the System File Checker tool to repair missing or corrupted system files.
    https://support.Microsoft.com/kb/929833?WA=wsignin1.0

    You can also have a third-party application installed on your computer that is the cause, so try to perform a clean boot Mode, which is executed at Windows startup, by using a minimal set of drivers and startup programs.

    How to make a Windows-specific Startup Mode.
    http://support.Microsoft.com/kb/929135

    It is also advisable to run a scan with Malwarebytes Anti-Malware to check all infections.

    Thank you.

  • Why show black screen for some of my users with a view to the horizon?

    Hello

    I installed horizon view 6.0. now, I just have a problem sometimes some of my users connect to their desktop with vmware view client horizon just see a black screen and cannot do everything even when I'm this office openconsole in vsphere client no show and a black screen for solve the problem I have to restart this desktop computer and its not ok how can I prevent black screen

    now I see that my status of vmware tools was obsolete is so important?

    What di I do?

    Best regards

    Babak

    As often occurs when the wrong VGA driver is installed.  This occurs when the view Agent is installed on the desktop, and then the VMware Tools is updated after the fact.  The result is the driver included with the Agent to view VGA is replaced with the VGA driver in VMware Tools.  You can see some advantages to the relocation of the Agent of the view, or update the VMware Tools and then install the Agent from the view.

  • AFX freezes for 5 seconds when switching between first and AFX

    I do a lot of dynamic binding After Effects in first. So I'm constantly switch back and forth between the first and after touch. I would basically create the effect with AFX, then drag the comp on first and put it on my calendar. I would then switch back to AFX and tweak the timing of effects, back to the first and make sure it looks OK, etc.

    But since the latest updates, After Effects hangs now for 5 seconds when I move to make a few adjustments.

    This seems not to be that great after effects containing 100 comps projects.

    I use after effects CC 2015.3 13.8.1.38 and first Pro CC 2015.4 10.4.0 (30) man and 10 PC Windows.

    This seems not to be that great after effects containing 100 comps projects.

    Æ checks the integrity of the project and saves temporary versions of the project. Sounds perfectly normal to me. You may be able to get the best results by regulalrly flushing the caches, so older versions are not held, but really, this sounds more like you need to adapt to your workflow and splice the comps to separate projects on a "as needed" basis rather than keeping a whole big piece of data with all the consequences.

    Mylenium

  • Satellite X 200-191-online laptop turns on the screen for 4 seconds, black, loud snoring

    * Satellite x 200-191 _ * _

    Intel Core 2 Duo T7700 processor
    * Origin: * 1024 MB + 1024 MB of memory 667 MHZ/512 MB of VRAM * replaced: * Kingston Kingston KVR667D2S5 / 2G (I have this x 2)
    * Origin: * 200 + 200 GB SATA hard disk drive (4200 RPM) * replaced: * only 1 HDD on the left, the other I'll be back in 2 days.
    17 WSXGA + TFT TRUBRITE screen
    HD DVD-ROM drive
    56K Modem / Lan
    W Lan (802.11 A/G/N)
    1/3MPixel camera Web
    Bluetooth
    Microsoft Vista Home Premium 32 Bit

    _ * My problem: * _

    I removed the battery, plug it into the power. Charging light lights up.
    I press the power button, power led turns of. Followed to the hdd led tower which flashes real quick, on, stays on for 1 second and then turns of. The power led stays on all the time.
    2 seconds after the power button, a fan starts to blow, while the hard drive the mention above led blinks for 1 second, 2 seconds after the fan starts blowing, it turns off.
    We are now 4 seconds later, roughly, all stopts, except a very small minor hum. (I just left on during a few minutes, his rest, nothing happens.) (Writing this all let him down for 10 minutes, the computer laptop op warms a bit, the card becomes warmer, but still only a tiny buzzing minor.)

    + My laptop works for 4 seconds, will not be any screen (black screen) does not load even BIOS. What could be the problem? +

    _ * Fixing? : * _

    OK so I let the laptop after a few months, said he was dead, just dusty. (Read the story to get it)
    But since last week, I thought that becomes dusty, I never opened a laptop before, why I try to make that custom.

    _ + * I replaced the modules of memory, Slot A and B, so many memories, same time, at a time, all means. * + _

    _ + * Since I have only 1 HDD, I used it in both slots. Looks like no difference. Using no. HDD, I don't have the zoom very tiny minor! *+_

    I followed a guide [http://www.irisvista.com/tech/] to open my laptop, to see what is inside.
    Find no loser caps, but found a see oil and a white paste.
    Closing the laptop to try, I've accidentally screwed some wrong in the laptop screws, drill the top cover of my laptop, but no fleas have been affected in this: P (Yes, Im a little towards the fort, I thought I'd use force for a couple of the screws was not the best thing I could do, but now I know) : p).

    ************************************************** ************************************************** ************************************************** ***
    * SOOO * my question, while I wait for the extra HDD (do in 2 days). (Probably not make any difference)
    What could be wrong, more precisely. I love should try to take the video card or something?
    Is there something I should do with some soldering?
    All tips/tricks that might work, weather to repair the laptop, or to refine the problem, a small part that I could replace it?

    Best regards
    Danny Visser
    The Netherlands
    ************************************************** ************************************************** ************************************************** ***

    _ * History: * _

    Don't know if it's not important, but just to let you know, so interested what happened at the laptop ;)
    I bought the laptop in the form of computers (in the Netherlands) asked that laptop mentioned above, with 2 things have changed. I wanted more memory, and I wanted windows XP. The shop told me it was possible. They bought me the laptop, they replaced with memories of kingston memory. They installed windows XP instead of Vista. They portable worked at that very moment. So, I bought the laptop to work with 1 year warranty.
    With the additional files given with the laptop, I could increase my warranty from 1 to 2 years free, so I did.

    After a few weeks that I noticed that the laptop became real probably hot after prolonged use. But according to the manual, it was normal.
    I used the laptop to the games, but also 2 months for a study of play. So I take several times at school in a backpack.
    After using only not for school, I reinstalled Windows Vista 32 BIT

    When a very uncertain when exactly, I noticed that it does (probably same problem as I have now) but I was really relaxed about, tried subsequently and in some way, it worked again. It happened maybe about 5 times in total.
    Knowing something was wrong, I brought computers to the form. They checked. (No not showing me what they did to her) But he told me that I had nothing to fear.

    After about 2 years, I actually sold this laptop to my mother. She used once or twice (she really looks like noob, just about computers in general, without even knowing if it should double click on the icons or not) she took him one or two times on TRIPS and they after about 2 years and 2 months... this problem happened.

    My mom knows a guy and a friend of this guy, work a lot with laptops broken, who told me that the problem was the motherboard _ + _.

    I decided to take it back to the shop. After a long class being there (about 6 to 8 weeks) (I go to the store like 15 times). The shop was able to tell me it was the motherboard. That the motherboard could not be fixed and a new way to expensive.
    + (I have known at this point, after the motherboard, what this laptop was not open yet. The screws were still new). +
    Funny information (not for me), this period of about 8 weeks, in fact we me lies like... I left a message on your voicemail, I do not HAVE a voicemail... Sorry for the caps, but im still xxxxxx on these lies.

    Therefore still believe in the shop... my laptop has gone... dead... but so since last week, I started looking into the laptop I... (Fixing)

    Hello

    To be honest that s a very long history and I think that we can t help you here and tell you what the problem is exactly because it s just a user to user forum. I think that you need professional help technicians of laptop, they can check what the problem is.

    According to your assignment I think that it s a hardware malfunction, perhaps the card mother, but this should be verified by professional technicians.

    You need to contact a service provider authorized in your country. You can find a list here:
    http://EU.computers.Toshiba-Europe.com > support & downloads > find an authorized service provider

    I m sure all you can specify with the ASP. The guys are really friendly and do a good job.

    Good luck! :)

  • black screen for 3.5 hours when starting

    Hello guys and girls I need you all to help the guard it's frustrating me

    , I bought a lenovo c200 series all-in-one whenever I start the pc, before it actually go to the desktop there will be a black screen, it lasted exactly three hours and a half (3.30), but there is a message saying IMAGE SETUP: AUTOMIC OPTIMIZATION IMAGE PLEASE PATIENTER (can someone please answer for why this is happening thanks in advance)

    If I were in your shoes, I could talk with the seller support staff.

  • Pavilion dv7-6c75eo: 10 start Windows (black screen for about 1 min.)

    Windows 7 (System. org) was running fast and good.

    Updated to 10 and after a few reboots, it has been installed and working.

    whenever I start cold blue windows logo appears and the device goes into screen black.

    It remains so for at least 1 minute and then the login screen appears. All the drivers are updated day/install.

    I tried to do a clean 10 x 64 Windows and installed well installation and rebooted.

    This time it was much faster (a few seconds) and I went into the Device Manager.

    I could see that Windows installed the drivers for various devices like the unknown devices disappeared one by one.

    Some time after (with 1 remaining peripheral unknown not related to the problem) it restarts.

    Now I'm on the black screen again whenever I restart.

    I hope that the description of this issue is understandable

    I've updated the hard drive on a disk of 120 GB and second disk SSD Intel with a disk of 1000 GB new

    Data sheet:

    CPU: i7 [email protected]

    RAM: 8 GB DDR 665 MHz (9-9-9-24)

    MB: HP 1803

    Graphics card: Intel HD Graphics 3000 + ATI Radeo HD 6700 M

    Storage: INTEL SSDSA2CW120G3 (SSD) + Hitachi-HGST HTS541010A9E680 (SATA)

    Audio: IDT HD Audio

    Windows Pro 64-bit 10

    Temperatures: CPU: 49-51/degr. Motherboard: 51-52/degr. storage: 32 degrees.

    I hope someone can get some ideas

    PS. : I'm not a newb

    The solution is either:
    ¤ Accept the loooooong delay
    ¤ Do not upgrade for Windows 10

  • Program/process running flashing a black screen on my desk.

    As I am workng on my computer get a black screen that flashes... .it just recently started happening... very annoying. Someone at - he never experienced HRT? I don't see how ths screen is that it disappears.

    Hello

    Please try to place your computer in a boot minimum scenerio.  It seems that there is a 3rd party application or process running which is the filler on your screen.

    http://support.Microsoft.com/kb/331796

    http://support.Microsoft.com/kb/929135

    Once you find an app that runs on your computer that is the filler, please remove the startup item or delete/remove the program.  I hope that this information is beneficial.

    Thank you

    Aaron
    Microsoft Answers Support Engineer
    Visit our Microsoft answers feedback Forum and let us know what you think

Maybe you are looking for