ThinkPad Tablet 2 - error 2201: UUID of the Machine is not valid

Similar Questions

• To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.

  To run all the applications of the laptop or install download applications works does not error message indicating that the application is not valid "win32.exe or win32.application.

  Hello m.velentino,

  Not sure if you are still having the error message isn't valid win32.applicaiton.

  Get the error: not a valid 32-bit application can have several origins:
  I have listed some of them below.

  The file is corrupted, bad or missing.
  -If the hard disk is damaged or hurt it cause work programs to fail, either because not all data can be read from the hard drive the program is damaged on the drive. Run scandisk and defrag on the hard disk to check for potential errors.
  -If you run the program from a shortcut on the computer, verify that the program is still on the computer. In some cases if the program is no longer installed on the computer, you can get this error.

  File is not designed for your version of Windows:
  -If you try to run a program that is not designed for your version of Windows, you can get this error.
  -Although many old programs designed to work in older versions of Windows will work with new versions of Windows, unfortunately, not all programs will not work.
  -If the program is an MS-DOS program more former start program or Windows, you can get this error.
  -If the program is designed for a 64-bit version of Windows and you are running in a 32-bit version of Windows, it will not work and generate this error.

  File is a virus, worm or other malicious program file.
  - This error can be generated by a file that is a virus, worm, Trojan horse or other type of malware file. Often, this will result because the antivirus installed on the computer will not allow the file to install or run. Try to analyze the file to check, it is not a virus or infected.
  -If the file has been checked and is clean, it is always possible that the virus protection program or a another program installed on the computer is at the origin of questions during installation or execution of the program. Start the computer in Mode safe and try to run the program. start the computer in Mode safe will be that nothing is running in the background that could cause this problem.
  
  Hardware incompatibility.
  -If you get this error during the installation of a program, it is also possible that the CD-ROM drive or the drive that you are installing the program from is not compatible with Windows or has drivers that are not compatible with Windows.
  -Download the latest drivers for your CD player or other of the manufacturer of the computer or the manufacturer of the equipment. (Microsoft does not pilot for other materials)

  Let us know if these suggestions help you.

  Marilyn

• Advice on the resolution "Error #2004: one of the parameters is not valid."?

  Hello

  Sometimes my graphs of objects returned by a remote call can be very deep and complex.  As you know, if you have not a reference to all the types of objects returned by a call to distance, you get this error:

  "ArgumentError: Error #2004: one of the parameters is not valid."

  So, I know what the problem is, but I often have a devil of a time finding - this who-class/type on that it chokes.  It usually involves a long process of trial and error.

  I was wondering if I forget what is obvious or if someone has a method to determine what classes he chokes on?

  Thank you!

  Usually, if you are using a debug version, you will get a record of the complete stack with line numbers.  I find those useful.

  Alex Harui

  Flex SDK Developer

  Adobe Systems Inc..

  Blog: http://blogs.adobe.com/aharui

• Error generating content. The folder is not valid for import.

  Hello

  I try to import a single article of smooth scrolling in my folio but it always returns this error message:

  "Content generation error.

  Folder "page 2"is not valid for importation.".

  Now, I've read that the folder structure must be correct.

  But in my case, I want to just import a single article.

  If the Article is called "Page2_h.indd" one its located:

  'office' > 'Magazine title' > '2 '.

  Could remember where I make a mistake?

  The folder should be included in a specific location, for example?

  I work with CS5.5

  I would be absolutely grateful for your advice.

  Thank you

  Sabine

  I forgot to select smooth scrolling... Thank you and sorry for bethering. should have seen that myself.

  best,

  Sabine

• Activation of Windows XP, says my license key (directly at the exit of the COA sticker on the back of the machine) is not valid.

  I reinstall Windows XP on a Compaq owned since 2002.   I used the Operating System CD Compaq accompanying to created a slipstreamed XP SP3 CD.  Installation past large, reading product key - it just behind the back if little hologram sticker certificate of Authenticity on the back of the machine that has been there for the past 11 years.  Microsoft says that my license is not valid.  Searched and searched found this MGADiag tool, here are the results.

  Diagnostic report (1.9.0019.0):
  -----------------------------------------
  Given WGA-->
  Release status: not activated
  Validation code: 1

  Code of Validation caching: n/a
  Windows product key: *-* - 93GTD - 7RV3F-PJ6RY
  The Windows Product Key hash: tpwHHq6AjQynbXZyYzioDsxVgPk =
  Windows product ID: 55277-OEM-2116362-92812
  Windows Product ID Type: 3
  Windows license Type: OEM System Builder
  The Windows OS version: 5.1.2600.2.00010300.3.0.hom
  ID: {EFF99AA2-B07F-4B3F-90B2-FE4DF021359D} (3)
  Admin: Yes
  TestCab: 0x0
  WGA Version: N/a, hr = 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Product name: n/a
  Architecture: n/a
  Build lab: N/A
  TTS error: n/a
  Validation of diagnosis: 025D1FF3-230-1_025D1FF3-238-2_025D1FF3-258-3
  Resolution state: n/a

  WgaER data-->
  ThreatID (s): n/a
  Version: n/a

  WGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  File: No.
  Version: N/a, hr = 0 x 80070002
  WgaTray.exe signed by: n/a, hr = 0 x 80070002
  WgaLogon.dll signed by: n/a, hr = 0 x 80070002

  OGA Notifications data-->
  Cached result: n/a, hr = 0 x 80070002
  Version: N/a, hr = 0 x 80070002
  OGAExec.exe signed by: n/a, hr = 0 x 80070002
  OGAAddin.dll signed by: n/a, hr = 0 x 80070002

  OGA data-->
  Office status: 109 n/a
  OGA Version: N/a, 0 x 80070002
  Signed by: n/a, hr = 0 x 80070002
  Office Diagnostics: B4D0AA8B-543-80070002_025D1FF3-230-1_025D1FF3-238-2_025D1FF3-258-3

  Data browser-->
  Proxy settings: N/A
  User Agent: Mozilla/4.0 (compatible; MSIE 8.0; Win32)
  Default browser: C:\Program may Explorer\IEXPLORE.exe
  Download signed ActiveX controls: fast
  Download unsigned ActiveX controls: disabled
  Run ActiveX controls and plug-ins: allowed
  Initialize and script ActiveX controls not marked as safe: disabled
  Allow the Internet Explorer Webbrowser control scripts: disabled
  Active scripting: allowed
  Recognized ActiveX controls safe for scripting: allowed

  Analysis of file data-->

  Other data-->
  Office details: {EFF99AA2-B07F-4B3F-90B2-FE4DF021359D}1.9.0019.05.1.2600.2.00010300.3.0.homx 32*-*-*-*-PJ6RY55277-OEM-2116362-928123S-1-5-21-1390067357-606747145-1417001333CompaqCompaq PC Compaq786 K 220020328000000.000000 + 0005DB334CF0184205904090409Central Standard Time(GMT-06:00)03109

  License data-->
  N/A

  Windows Activation Technologies-->
  N/A

  --> HWID data
  N/A

  Activation 1.0 data OEM-->
  BIOS string matches: Yes
  Marker of the BIOS string: C019:Compaq Computer Corporation | 10014:Compaq Computer Corporation | 1FFEA:Compaq Computer Corporation | 1FFEA:Hewlett - Packard Company
  Marker of OEMBIOS string. DAT: N/a, hr = 0x80004005

  Activation 2.0 data OEM-->
  N/A

  They do, and as you pointed out, persistence is the key word.

• I get this error message 'The URL is not valid and cannot be loaded' when I try to go to Firefox home. I uninstalled the modules, uninstaleed and reinstalled a new fresh firefox which did not help

  I get the following error message 'The URL is not valid and cannot be loaded' when I try to go to firefox home. I uninstalled modules, uninstalled Firefox and then install a new version. Still have the problem.
  Thanks for the help

  This problem may be caused by a corrupt installation of Visual C++ or incomplete (several versions can be installed-by-side; SxS) it lacks certain runtime components (redistributable Packages), which depends on Firefox (problem with an embedded manifest file that specifies a specific runtime version).

  You need to install the missing components (for example, Redistrbutable end 2005 ++).

  • https://www.Microsoft.com/download/en/details.aspx?ID=5638
  • [908165/questions/908165] The URL is not valid and cannot be loaded
  • bug 713167 - Microsoft.VC80.CRT SideBySide errors, browsercomps.dll

• VISA (Hex 0xBFFF001E) error the specified state, the attribute is not valid or is not supported as defined by the resource.

  Hello

  First of all that I must say I just starting with control of the instrument using Labview. For this reason, it is possible that the problem I have is easy to solve. However, I am looking for any solution for the forum, but unfortunately I can't fint anything.

  While the situation is this: I'm looking to plug a power Analyzer (Yokogawa WT1800) with the PC through GPIB. To achieve this, I use the USB/GPIB Interface of Agilent 82357 B. The connection is done correctly because I can see and communicate with him through the Explorer NI MAX.

  In order to achieve control of the instrument using Labview, I downloaded and installed the driver of Yokogawa WT1800 (Driver instruments ykt1800) using the NI Instrument Driver Finder tool. The problem I have is that when I run the examples, I find the following error message:

  Error 1073807330 has occurred to the property (arg1) node in Yokogawa WT1800 Series.lvlib: Initialize.vi-> Yokogawa WT1800 series continuous measurement Normal.vi

  Possible reasons:

  VISA: (Hex 0xBFFF001E) the State specified, the attribute is not valid or is not taken in charge as defined by the resource.

  I tried to change the input of the open Visa arguments vi because I think that this is where is the problem, but I can't reach any solution. The following image is attached to the block diagram of the initialize.vi:

  

  Any help is appreciated.

  Thank you.

  I suspect the redirect property. Try to remove it.

• error: implicit declaration of function 'GetActiveProcessorCount' is not valid in C99. Make sure that you include the prototype for the function.

  I get the following error:

  error: implicit declaration of function 'GetActiveProcessorCount' is not valid in C99. Make sure that you include the prototype for the function.

  I've included windows.h

  which includes winbase.h

  Winbase.h contains the prototype for the function in the above error message.

  If I disable 'Require the function prototypes' and 'Building with the C99 extensions', I get the following error:

  error: Undefined symbol "_GetActiveProcessorCount" referenced in "c:\Users\Public\Documents\National Instruments\CVI\HDLC\cvibuild. HDLC_RandD\Debug\HDLC_RandD.obj ".

  I work in the ICB 2013 SP2.

  Why I get this error.

  This function is only valid in Windows 7 and later versions. Because the ICB 2013 still supports Windows XP, this feature is excluded by default from Windows headers that are provided with CVI. If you do not need to worry about the versions of Windows prior to Windows 7, however, you can include it yourself, by adding the following macro in the dialog box options generation CVI (be sure to include for all configurations):

  

• Windows Activation error: this version of the Windows Genuine Advantage validation tool is no longer supported. Please download the latest version and make sure that your system clock is accurate.

  Original title: Genuine Advantage error.

  Attempts to run Genuine Advantage so I can install photo pro tools Gets the error:
  "This version of the Windows Genuine Advantage validation tool is no longer supported.
  Please download the latest version and make sure that your system clock is accurate. »

  My system clock is accurate within 2 seconds of the atomic clock in Ft Collins.
  There is no update I can find for Genuine Advantage.

  I have a XP

  Please try USING INTERNET EXPLORER validation only - www.microsoft.com/genuine/validate

  What to validate for?

  what you're trying to download?

• I get an error message saying that the mail was not sent when sending a PDF file in Outlook Express.

  Outlook Express 6

  Hello
  Recently, if I send a big PDF file via outlook, after attempting to send the files, I get an error message saying that the mail has not been sent. The files remain in the Outbox, but when I check with the recipient, they confirm that they have received the mail! This has only recently begun to happen. Any suggestions? Thank you

  Check: File | Work offline and in: reviews | Layout: uncheck the preview pane. Open the Outbox and delete the message.
   
  If that does not create a new box of sent, and sent items.
   
   
  Follow these steps for the Outbox and sent items after you move the messages you want to save to a local folder that you create.
   
  Tools | Options | Maintenance | Store folder will reveal the location of your Outlook Express files. Note the location and navigate on it in Explorer Windows or, copy and paste in start | Run.
   
  In Windows XP, the files of user OE (DBX and WAB) are by default marked as hidden. To view these files in Windows Explorer, you must enable Show hidden files and folders under start | Control Panel | Folder Options icon | Opinion, or in Windows Explorer. Tools | Folder options | View.
   
  With OE closed, find the Outbox.dbx and Sent Items.dbx file and remove them. New files will be created automatically when you open OE.
   

• error code: win32 error code returned by the print processor: 6. the handle is not valid.

  When I try to print to a network printer, the print job does not print anI getting the error code: win32 error code returned by the print processor: 6. the handle is not valid. All ideas

  Hello

  In this case seems to be with the corrupted printer drivers.

  Follow the steps below to reinstall the driver.

  1. click on the "Start" button, type PRINTERS in the start search box and press ENTER.

  2. find the icons that are associated with the printer, and then remove them.

  3. right click on the blank part of the window and choose "Run as Administrator"-> "Server Properties".

  4. on the tab drivers, select the printer listed and click Remove. Please, select Remove driver and driver package.

  5. open the start menu, enter APPWIZ. CPL in the search box and press ENTER to launch the "programs and features".

  6. try to remove all related printer software.

  7. then download the latest driver from the printer manufacturer's Web site.

  8 install the driver.

  All the best!

• Error "0 x 80070091: the directory is not empty ' when I try to delete a folder on my external hard drive

  Original title:

  When I am trying to delete a folder on my external hard drive I get the error code following error 0 x 80070091: the directory is not empty

  Hello

  1. are you having the same problem even if you connect the external hard drive to another computer?

  2 have you made any changes to the computer, before the show?

   
  Method 1:
   
  Start your computer in safe mode and then try to delete the folder.
  Start your computer in safe mode
  http://Windows.Microsoft.com/en-us/Windows-Vista/start-your-computer-in-safe-mode
   
  Method 2:
   
  Appropriating the folder and then try to delete it.
  Appropriating a file or a folder

  http://TechNet.Microsoft.com/en-us/library/cc753659.aspx

   
  Note: The link above also applies to Windows Vista
   
  Method 3:
   
  Check the external hard drive to find errors.
  Check your hard drive for errors
  http://Windows.Microsoft.com/en-us/Windows-Vista/check-your-hard-disk-for-errors

  Important: While performing the check disk on the hard disk, bad sectors are found and if he's trying to repair this area, all available data on the risk of being lost.

• When I select Help and support icon, I get an error message indicating that the feature could not start.

  help and support does not work

  When I select Help and support icon, I get an error message indicating that the feature could not start.

  I use a Vista 32 bits on a HP computer operating system model number m8300f.

  In addition, I bought a copy of Win 7, but who could not load freezing during installation.

  Hello

  Try to run the command in the elevated command prompt, follow the steps below, it could help us solve the problem.

  1. open the start menu, click programs principally made, select accessories.
  2. right click on command prompt, and then click "run as administrator ".
  3. type the following commands in the DOS prompt window and press ENTER at the end
  of each line:

  REGSVR32 MSXML3. DLL/U
  REGSVR32 MSXML3. DLL
  REGSVR32 MSXML6. DLL/U
  REGSVR32 MSXML6. DLL

  (At the elevated command prompt command should not give us any error).

  Restart the computer and try to access help and Support.

  For the problem of installation of windows 7.

  We would like to get more information about you to help solve your problem. You better, please answer the following questions.

  1. How did you start the installation process?

  2. you perform a new installation or an upgrade?

  3. what type of drive you are using for installation?

  4. at what stage of the installation has it stopped?

  5. have you received an error message?

  First of all, I would say that you disconnect external devices connected to the computer except the keyboard and mouse.

  If you have performed an upgrade suggests to restart the computer and you will be prompted for a roll back option.

  Once you're on the office suggests to run Upgrade Advisor and check what needs to be done before you start the upgrade.

  Before you begin the upgrade process to ensure that your computer meets the condition of equipment to install Windows 7 and check on the website of manufacturer computer if the computer is good to run windows 7 or not.

  Installing and reinstalling Windows

  http://Windows.Microsoft.com/en-us/Windows7/installing-and-reinstalling-Windows

• Window named csc.exe. Application error, window that says "the application could not start correctly (0xc0000142). Click Ok to close the application when you try to run Microsoft solve this diagnosis

  Original title: Microsoft Fix it diagnosis

  I ran Microsoft solve this diagnosis. He gave me a window named csc.exe. Application error, window that says "the application could not start correctly (0xc0000142). Click Ok to close the application.  someone knows how to fix this?

  Thank you

  FOR EXAMPLE

  Hello

  Thanks for the reply. Until I'm your answer I have restored the laptop to the State of origin, with the possibility of restoring elements that had been added by the user. I'm trying to update windows, etc.. If I get errors or problems I will post them here. Thanks for your detailed response.

  Eddie

• I use a mac and would like to buy the package of Lightroom.  I had the trial and it was fine.  I was enrolled in the Belize and I get an error message saying that the country is not supported.  In the United Kingdom, I changed my region and I still get th

  I use a mac and would like to buy the package of Lightroom.  I had the trial and it was fine.  I was enrolled in the Belize and I get an error message saying that the country is not supported.  In the United Kingdom, I changed my region and I still get the same error message?

  Hello

  Try to subscribe through pricing and membership creative cloud plans | Adobe Creative Cloud

  Hope that helps!

  Kind regards

  Sheena