ThinkPad X61t: can I use a pen device with WinXP without Tablet Version?

Ladies and gentlemen,

Please tell me the truth: I can use not compresses-version of Windows XP with a pen-Interface?

Can I organize Pen Interface with any kind of drivers, or I need to install the Tablet PC of Windows version?

And maybe ordinary Windows XP can become a Tablet XP version after installation of drivers of special magic?

You know any type of software to activate the pen device and touchscreen under non-tablette WINDOWS XP.

Or it is impossible?

Thank you for the answers.

Well, you can get the driver here http://www.wacom.com/productsupport/select.cfm it's only 'pen' good pilot.

If you need to contact, you can always install driver multitouch above after that.

Have fun with your tablet,

sipp11

Tags: ThinkPad Notebooks

Similar Questions

  • Can I use your Apple TV with MacBook Air

    I use a MacBook Air, 13-inch, mid 2013, OS X El Capitan 10.11.6. I am interested in Apple TV. With this product I was able to connect my Epson EB - S18 projector to my Mac in order to project movies that I bought on iTunes on my wall of the apartment? Would be there is always a problem to play these movies 'protected' outside the computer itself? Must they be downloaded in SD and not HD? Can I use a patch to connect my Mac to the Thunderbolt port to the projector via the HDMI port? Can I use a patch to connect the VGA cable to the port on the computer to the projector? Please notify.

    Thank you very much.

    Can I use your Apple TV with MacBook Air

    Yes! AirPlay with an AppleTV is the easiest to use and less complicated solution.

    SD / HD makes no difference.

    You will only be able to enjoy the full quality of an HD movie with a better projector however. This model projector is not really intended for presentation of home theater. It will work well. As you can imagine that there is no upper limit on the amount, you can overlook these things, but $2000 is going to buy a nice home theater projector these days. A few years ago, you would need to spend $ 50,000 or more.

    Would be there is always a problem to play these movies 'protected' outside the computer itself?

    No, not if you bought (or leased) from iTunes. They have to play on any device compatible iTunes. You can even use AirPlay to distribute it to your AppleTV from an iPhone.

    Can I use a patch to connect my Mac to the Thunderbolt port to the projector via the HDMI port?

    Yes.

    Can I use a patch to connect the VGA cable to the port on the computer to the projector?

    Not without a converter. Avoid using the VGA if possible. It's a terribly outdated and generally horrible alternative to any digital standard. Since your MBA has a port Thunderbolt, and if your projector has a HDMI input, buy a cheap (± $10) Thunderbolt to HDMI adapter cable. But AirPlay is preferable to a wired connection.

  • A Mac mini, purchased in the UNITED Arab Emirates can be used in the USA with only change the power cord?

    A Mac mini, purchased in the UNITED Arab Emirates can be used in the USA with only change the power cord?

    Yes.

    http://www.Apple.com/Mac-mini/specs/

    the voltage may vary from 100-240 V AC.

  • Can I use data value references with a functional overall?

    Can I use data value references with a functional global?  I am trying, but it causes problems:  I run the attached VI with "new DVR" selected.  Then I run it again with "return array" and I get the error 1556: "The reference is invalid. This error might occur because the reference has been deleted."  It seems to have forgotten the DVR, but I thought it should be stored in the shift register.
    
    Another odd thing:  In my VI, if I try to connect the wire shown in "something strange", then the type changes (from U16 array to DBL), i.e. it doesn't recognize the type referenced by the DVR.
    
    I want to pass a very large 4-dimensional array between parallel loops with a functional global.  To avoid memory problems, I want to use a DVR and in-place element structures.  If that's not allowed in Labview, I will try passing it through a user event or notifier.  Any problems with those alternatives?
    
    Thanks.
    

    I received a response from an engineer applications OR on this subject, and it seems that it is perhaps a problem with Labview.  They are working on it, so I'll go ahead and close this discussion.

    Thanks for the help,

    Allan

  • Can I use internet in Holland with a rt surface that I bought at the Portugal?

    Can I use internet in Holland with a rt surface that I bought at the Portugal?

    From Internet Explorer

    Original title: rt of surface

    Hi pmeulendijks,
    The answer is Yes. It depends on your networks.

    Thank you

  • Can I use VMware vSphere Hypervisor™ with vSphere Client?

    It's the question next poped upward.

    -Can I freely use for my business need VMware vSphere Hypervisor™, and what will be the difference with VMware vSphere Starter Kit?

    and

    -Can I use VMware vSphere Hypervisor™ with vSphere Client software for free?

    Yes - it is freely permitted, but he he has limits and lack of features compared to the vSphere Essentials kits. Another thing to note is the absence of vCenter Server to manage multiple ESXi hypervisors with the free version. The backup API are, in my opinion, one of the main obstacles to the use of this.

  • Can I use LEAD or TROLLING with groups?

    Can I use LEAD or TROLLING with groups?
    I want to compare two records in each group.

    Is this possible?

    Thanks in advance

    Xavi says:
    Can I use LEAD or TROLLING with groups?
    I want to compare two records in each group.

    What do you mean by groups?

    Twinkle

  • I use windows XP service pack 3 and I can't connect to the internet on your laptop even if I can connect using my other devices.

    I have tried everything I can think of nothing doesn't. The strange thing is that it connects as usual and I can even use Skype and download updates, but I can't surf the net. I can't understand. I have tried ipconfig release and then renew, repairs of stack TCP/IP, Winsock reset and the use of different browsers. I ran the XP connection troubleshooting tool and received the following message, that this is probably caused by your firewall settings

    "check the settings of the firewall for the HTTP port (80), HTTPS (443) AND ftp PORT (21) port.

    The problem is that I can't change my firewall settings that I can not start the firewall and get this error message every time I try

    Cannot start the service Windows Firewall/Internet Connection Sharing (ICS) on the Local computer.
    Error 0 x 80004015: the class is configured to run as a different caller's security id

    I downloaded the hotfix from microsoft, but it made no difference unfortunately.

    I use AVG 2011 antivirus protection. I tried connecting via the wireless and wired. I did ipconfig and tried to rattle of my other devices and my router and everything seems normal because they can communicate with each other. See below.

    Microsoft Windows XP [Version 5.1.2600]

    Copyright (C) 1985-2001 Microsoft Corp.

    C:\Documents and Settings\Administrateur > ipconfig

    Windows IP configuration

    Ethernet wireless network connection card:

    The connection-specific DNS suffix. : gateway.2wire.net

    IP address...: 192.168.1.72

    ... Subnet mask: 255.255.255.0.

    ... Default gateway. : 192.168.1.254

    C:\Documents and Settings\Administrateur > ping 127.0.0.1

    Ping 127.0.0.1 with 32 bytes of data:

    Reply from 127.0.0.1: bytes = 32 time<1ms ttl="">

    Reply from 127.0.0.1: bytes = 32 time<1ms ttl="">

    Reply from 127.0.0.1: bytes = 32 time<1ms ttl="">

    Reply from 127.0.0.1: bytes = 32 time<1ms ttl="">

    Ping statistics for 127.0.0.1:

    Packets: Sent = 4, received = 4, lost = 0 (0% loss),

    Time approximate round trip in milli-seconds:

    Minimum = 0ms, Maximum = 0ms, average = 0ms

    C:\Documents and Settings\Administrateur > ping 192.168.1.72

    Ping 192.168.1.72 with 32 bytes of data:

    Response to 192.168.1.72: bytes = 32 time<1ms ttl="">

    Response to 192.168.1.72: bytes = 32 time<1ms ttl="">

    Response to 192.168.1.72: bytes = 32 time<1ms ttl="">

    Response to 192.168.1.72: bytes = 32 time<1ms ttl="">

    Ping statistics for 192.168.1.72:

    Packets: Sent = 4, received = 4, lost = 0 (0% loss),

    Time approximate round trip in milli-seconds:

    Minimum = 0ms, Maximum = 0ms, average = 0ms

    C:\Documents and Settings\Administrateur > ping 192.168.1.254

    Ping 192.168.1.254 with 32 bytes of data:

    Request timed out.

    Response from 192.168.1.254: bytes = 32 time = 2ms TTL = 255

    Response from 192.168.1.254: bytes = 32 time = 4 ms TTL = 255

    Response from 192.168.1.254: bytes = 32 time = 1ms TTL = 255

    Ping statistics for 192.168.1.254:

    Packets: Sent = 4, received = 3, Lost = 1 (25% loss),

    Time approximate round trip in milli-seconds:

    Minimum = 1ms, Maximum = 4ms, average = 2ms

    C:\Documents and Settings\Administrateur > ping 192.168.1.70

    192.168.1.70 ping with 32 bytes of data:

    Response of 192.168.1.70: bytes = 32 time = 2ms TTL = 128

    Response of 192.168.1.70: bytes = 32 time = 94ms TTL = 128

    Response of 192.168.1.70: bytes = 32 time = 8ms TTL = 128

    Response of 192.168.1.70: bytes = 32 time = 13th month TTL = 128

    Ping statistics for 192.168.1.70:

    Packets: Sent = 4, received = 4, lost = 0 (0% loss),

    Time approximate round trip in milli-seconds:

    Minimum = 2ms, Maximum = 94ms, average = 29ms

    C:\Documents and Settings\Administrateur > ping 192.168.1.254

    Ping 192.168.1.254 with 32 bytes of data:

    Response from 192.168.1.254: bytes = 32 time = 1ms TTL = 255

    Response from 192.168.1.254: bytes = 32 time = 2ms TTL = 255

    Response from 192.168.1.254: bytes = 32 time = 3ms TTL = 255

    Response from 192.168.1.254: bytes = 32 time = 3ms TTL = 255

    Ping statistics for 192.168.1.254:

    Packets: Sent = 4, received = 4, lost = 0 (0% loss),

    Time approximate round trip in milli-seconds:

    Minimum = 1ms, Maximum = 3ms, average = 2ms

    C:\Documents and Settings\Administrateur >

    I worked on it for 2 days straight trying to find a solution and this is my last resort. I really hope that someone can help me because I even tried technicians internet ATT who couldn't help me. There must be a solution out there. I must be missing something. It must be a software problem or something simple. Help!

    Hello

    You can check this link:

    http://support.Microsoft.com/kb/920074

    Note:

    It implies also on Windows XP SP3

  • CC license can be used on multiple devices?

    Hello

    I think about buying the license CC of Photoshop and would like to know if it can be activated on several devices. A photographer, it is important for me to be able to use it both on my desktop and laptop.

    Thank you.

    Yes, you are allowed to have the software up and running on two machines.

  • Can I use an SD card with the new MacBook?

    Looking to buy a new MacBook. From what I can tell there is no SD card reader.  I don't see any accessory adapter for SD readers either.  Is it possible to use an SD card with the new MacBook?  Thank you!

    Only I can find is for iOS devices > > http://www.apple.com/shop/product/MJYT2AM/A/lightning-to-sd-card-camera-reader?f node = 91

    On the SDXC - Apple Support and SD card slot

    I hope someone will find an adapter for you.

  • Can I use a PXI-6224 with the SCB-68 to take the measurements of 4-wire RTD, or do I need a power supply separate?

    I suspect I already know the answer to this question:

    I have an PXI-6224 M-series data acquisition card and a terminal of the SCB-68 block and want to take action using a bunch of 4-wire RTD. Is the power to the power source for these measures 6224, or is - not possible with the hardware I have?

    I know that NEITHER you propose other solutions to my problem: I am interested to know if I can do these measures with the device that I currently have on site.

    Thank you!

    Hello Jeffrey,.

    You have two options here, but it doesn't look like you need some hardware.

    The SMU-4357 built conditioning of signals, but it will not work on the chassis curent you have:

    http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/210596/

    We also have an option with the NI 9217 cDAQ, but once, it gets you into a different platform:

    http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/208804

    We used to have an option that we sell no more - the SC-2042RTD. If you are lucky and have one of them on hand so here's some info:

    http://digital.NI.com/public.nsf/allkb/4FF2C0F8D11B99B486256F4C006DCEA0

    You can also use these two elements in conjunction with eachother with your current PXI card:

    http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/12311

    http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/10778

    Finally, you could get an SCXI chassis and drop them in:

    http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/201609

    Thank you

    Joel C

    Technical sales engineer

    National Instruments

  • can I create custom context menus? Can I use Push technology? With the browser?

    Anyone know if I can create custom context menus? Also, can I use Push technology? I vibrate the device? With the browser?

    Just try to clarify to make sure I understood the question.  The browser does not support the menu adding items to the BlackBerry menu (I don't know how tell - the menu that is displayed when you press the menu key on the BlackBerry). Java applications are.  You could build something in JavaScript (on 4.6 and later) who gave you menus, but it does not fire when the menu button has been pushed.

  • can I use a touch screen with photoshop CS6 and Windows 7

    I need to define specific image areas to make a binary image of the organelles in an electron microscope of a cell. It would be much easier by using a pen as a mouse. Can I fix a touch screen to my computer monitor and use Windows 7 and Photoshop CS6?

    Hello George,.

    If I myself remember well touch sensitivity was introduced with Windows 8 and improved in point 8.1, so I doubt if a touchscreen monitor would work. You could easily use a graphics tablet, but enjoy the extra convenience of drawing on a screen with a science-based application.

    Hope that helps

    Terri

    PS you have a name very famous Professor George Porter was an English Nobel Prize chemist a few years ago - I had the chance to go to one of his at the Royal Institution Christmas lectures, a very clever man.

  • on a student account can I use it on my computer and my Tablet?

    can I use multiple devices with a student account?

    You can have Creative Cloud installed and signed in on two computers as long as you don't use it on one at a time. To install Creative cloud on a computer extra, just download and install as you did on the first computer, sign in to your Adobe account at Adobe using your Adobe ID website, download the Cloud creative application, then download the applications you want to use.

    You can download the Adobe Creative Cloud Desktop App from here:
    Creative cloud help | Creative cloud desktop.

    After installing the desktop creative cloud application, you will need to sign in with a login password and Adobe. Then you can install applications. This link provides more information and step by step instructions, if you need: CC help | Download, install, update or uninstall applications.

    Mobile applications for Android and iOS are available for creative cloud. Please see this link:

    Adobe mobile, iPhone, iPad, Android apps | Adobe Creative Cloud

    I hope this helps.

    Guinot

    movement creative cloud download & install

  • Can I use a new Mini with my old 10.5.8 iMac?

    I have a Mac G5 with 10.5.8. Can I use it as a monitor and run a Mac Mini 2016 with him?

    By implementing Virtual Network Computing, which requires an independent monitor.

    (144654)

Maybe you are looking for