ThinkPad Yoga - Backspace, Windows, shift, T, Y, tab, [---], Capslock key doesn't work do not

Similar Questions

• Satellite A300 - FN key doesn't work is not in Windows 7

  I just upgraded my laptop Windows 7 64 bit.
  Since I upgraded the keys FN "F1 - F12" did not work, light on the keyboard lights up when I press the 'FN' key so the button seems to work and the front NATIONAL arow and keys still work but not the keys "F1 - F12.

  Anyone know how to fix this?

  Hello

  Have you installed the package of value added?
  If this isn't it!

  In addition, you should check if the Flash from Toshiba card utility is enabled/activated.
  You can check this in Programs\Toshiba\ Flash Card Utility

  Check it!

• FN key doesn't work is not Windows XP - Satellite L305-S5885

  Hello, I recently downgraded my Toshiba Satellite L305 S5885 from Vista to Windows XP. Everything works well except the function (Fn) keys to control the screen brightness, volume. Some function as mute but most do nothing when I try to use them. All the installed drivers although Device Manager shows errors or lack nothing.

  I tried to install all the drivers for the keyboard, the Fn keys, keyboard shortcuts, and still I can't work at all. Someone was able to get these keys to run after the installation of WinXP or you know what drivers/software I'm missing? These keys can be used in XP or they work only in Vista?

  Thank you.

  This feature has nothing to do with the operating system or Device Manager. FN keys feature Toshiba use for years and in my opinion, it will be used in the future also.

  As I see you probably have US laptop model. I put t know how he works in the United States, but here in Europe Toshiba offered special WXP BIOS update. After installing this BIOS the FN keys work correctly.

  In order to check it please US Toshiba support site under http://www.csd.toshiba.com/cgi-bin/tais/su/su_sc_modSel.jsp to see what is available for Windows XP Home edition. I also recommend you check the section ask Iris. Maybe you can find useful newsletters.

  One last thing: under http://community.compuserve.com/n/pfx/forum.aspx?webtag=ws-laptop&redirCnt=1 you will find the forum we Toshiba. There, I hope that you will find answer to your question.

  Good luck and please let us know if you set up Windows XP Home edition successfully.

• Windows product key doesn't work is not for the reinstallation of Windows 7

  So my Lenovo (B560) became super slow and I want to wipe the hard drive and reinstall Windows 7. But when I looked on the Microsoft Web site and tried to check my key I received the following message is displayed:

  "The product key you have entered seems to be the software that was preinstalled by the manufacturer of the device. Contact the manufacturer of the device for software recovery options.

  The product key that I used was the COA sticker under the laptop which was indeed different from one I receovered from the register. In any case, I tried both and none worked.

  Ideas for how can I proceed?

  You must install OEM Lenovo recovery disks or a recovery partition to use the key.

• Special character key and keys doesn't work is not in Windows 8

  Original title: just installed win8.  more funny - number and @ sign willnot work trying to reset my pw etc but works fine on my applications. can u solve this problem?

  Installed Win 8 and now numbers and symbols do not work when I try to change my pw or make changes to my account MSFT. BUT they all work very well in all my applications like Word, Outlook, etc. I have a HP laptop dv7. Is there a solution?   It is ironic that I have to use the sign @ to try to get help from MSFT because that's exactly the problem - I can't get the @ sign in my account with them when

  Hi Richard,
  
  Welcome to the Microsoft community.
   
  It resembles that of the number keys and @ key will not work after you install Windows 8. I understand that this can be embarrassing.
  
  You can follow these steps to search for a program called detector of key journal constant guard or the constant guard of Comcast.
  
  (a) press "Windows +R" and then type "appwiz.cpl" and press ENTER.
  (b) locate the program constant guard here.
  (c) make a right click on it and select Uninstall.
  (d) to restart your computer.
  
  It will be useful. Feel free to get back to us if you have any other questions.

• Print screen key doesn't work is not on my laptop in Windows 8

  I have a HP Pavilion g7 and the prt sc does not work.  How can I activate it?

  I have a gateway and just thinking about it.  Hold command/FN/print screen and then paste with Control/FN/V (view)

• spell check doesn't work is not in outlook on windows 7

  Hi the spell checker doesn't work is not in my outlook for windows 7. This can be corrected?

  Sincerely, Robert H.C.

  Outlook.com has a manual spell at the top next to the options button control. It won't appear that if you write an e-mail AND if your browser is not checking spelling himself. In most modern browsers the spell checking is done by the browser itself and may need to be enabled in this browser

  http://email.about.com/od/windowslivehotmailtips/Qt/How_to_Use_the_Windows_Live_Hotmail_Spell_Checker.htm

  You may need to activate in your browser

  Google chrome
  http://support.Google.com/chrome/bin/answer.py?hl=en&answer=95604

  Firefox
  https://support.Mozilla.org/en-us/KB/how-do-i-use-Firefox-spell-checker

  IE , it depends on the version you have.

  http://blogs.msdn.com/b/ie/archive/2011/11/08/typing-with-speed-and-accuracy-in-IE10.aspx

  For additional amount IE 10 tips https://ie.microsoft.com/testdrive/Browser/SpellChecking/Default.htmll

• After installing Vista Ultimate, thinkpad r61 connection Wi - Fi doesn't work do not

  installed vista ultimate, now Wireless does not, ethernet not tho, thinkpad r61, had professional vista prior to upgrade, wireless worked fine, wireless adapter: wifi link 4965 AGN, yes a driver updated, done Yes ms dignostics, 1 other thing tho, cannot turn on the wireless radio.

  Wireless connection not working do not, after installing windows Ultimate edition, may depend on a wireless radio.

  Disable anti-virus and firewall (for now) and check if it's anti virus causing the problem.

  Another thing, you can try:

  Uninstall the card drivers wireless network from the Device Manager , restart the computer and let the operating system to install the generic drivers.

  Wireless works fine now?

  Now, visit the support IBM (drivers and downloads) page, enter your model number and download the drivers wireless on your desktop.

  FYI, here is the link:

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-67856

  Install the drivers in administrator mode.

  P.S Make sure wi - fi on the laptop button is turned on...

• My Acer Aspire V - 123 Windows 8 keeps freezing and some keys on the keyboard are not working

  I'm currently using a netbook ACER ASPIRE V - 123 with Windows 8 as its operating system and it is not yet updated to 8.1.

  At first when my computer laptop while boots 'seems' to agree, and whenever I try to open a file without any content it took me about 30-45 seconds, opening a program would take me almost 45 seconds to a minute, and I think that something is not right with my laptop and when I try to open a website via my web browser and my laptop would just FREEZE and I can't do anything about it , but I hate to do HARD reset. And to add to this unfortunate scenario is that some of the keys on my keyboard are not working the letters like R, T, I, O and backspace and many others (which I don't remember exactly one by one).

  I try to read some forums on different sites and some posts to the community of MS and did several tests like starting in SAFE MODE w / NETWORKING and downloaded the software like MALWAREBYTES to find potential infections, but nothing found. I also did the start-up in MINIMAL MODE, but again, the situation was the same, but when I'm the boot without failure the filling and freezing are only decrease and I don't want always starts in mode safe.

  From now my laptop is booting in a start-up in MINIMAL MODE and I don't know what to do next, what to try next. I hope someone could lead me to the solution to this problem, I would be eternally GRATEFUL.

  Please do help me in a step by step process and if possible please guide me with pictures or screenshots because I prefer to learn things when I Visual effects on what to do.

  Thanks for patiently reading this post.

  -Raphael

  Hi Ben,

  Sorry for the late reply, the laptop has been fixed, it seems to be a hardware problem. We disconnected the connection of the keyboard to the laptop right now I use an external keyboard to type. Cannot afford now to buy and replace my laptop keyboard, the graphics card Driver has been updated also and I've reformatted the OS

  The gel did not appear more in the normal boot and if all goes well for work this way for good.

  Thanks for the information you have shared to me, he has also been a great help.

  until next time Ben!

  Best regards

  Raphael

• Firefox doesn't work does not correctly on Windows 10

  Well, I've upgraded to Windows 10 and since then, Firefox is not working properly (not not display graphics, google sites won't load do not, etc.), I tried uninstalling and reinstalling several times, I even waited for the new update... None of them worked. I read something about security certificates, saying I had to import them to Firefox, but the certificate that he mentioned did not exist in my computer. I have also disabled hardware acceleration, cleared my cache, even deleted my profile from my computer, all to nothing does not. It is sad to see the attached screen. (A text-only screen saying: "Firefox + Windows 10.) Perfect set")

  I hope you guys can resolve this problem as soon as possible. If this is happening to me, it happens to a lot of people.

  Did you secure yourself certificate errors? If Yes, do you use Avast, BitDefender, ESET or Kaspersky?

  If you do, we can give specific suggestions.*

  If this is not the case, a further 10 Windows users questions are report is that they were added to a family and their Firefox has been the subject of parental controls that causes seemingly random crashes. Try to turn off the parental control of Microsoft (or are not part of a family): http://windows.microsoft.com/en-us/windows-10/turn-off-microsoft-family-settings

  * For Avast, you can disable the part numerical analysis of Web Shield. I saw these steps in another post:

  1. Open the Avast dashboard on an affected system.
  2. Select settings in the left side menu.
  3. Adopt a Protection Active.
  4. Click on customize next to the Web Shield.
  5. Uncheck the option "Enable HTTPS analysis", and then click ok.

• Shift click doesn't work does not in Mail or Word.  I am currently using an iMac (retina, 5K, 27 inch, mid-2015)

  Recently, the shift click feature selection of files to stop work in terms of selection of several files that are next to each other.  I also can no longer use the command key and click to select files that are not contiguous located.  I'm under El Capitan 11.4.  Any ideas?  A Mac user for 25 years, never had this problem before.

  Mike

  Solved the problem, changed the connection to the USB port on the back of the Mac.

• User accounts - > user accounts to manage a link doesn't work is not in Windows 7 64 bit

  Hello

  I tried to open the Panel-> user accounts-> accounts less manage accounts does not create a new account link. My OS is Windows 7 64 bit. 32-bit Internet Explore doesn't work. I tried to register the dll files to 32-bit internet explorer, but it does not work. Please help me.

  Hi Madhavaarimilli,

  -You receive an error message when you try to create a new user account or access to Internet Explorer 32-bit?

  First of all, I suggest to start the computer in safe mode and check if you can create a new account on your computer. To boot to the desktop in safe mode keep tapping key F8 during restart. Once you see the option to start in safe mode, select it and press ENTER.

  Access the link to learn more about how to start the computer in safe mode: http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode

  To create a new user account follow the steps below:

  1. open user accounts by clicking the Start button, click Control Panel, click user accounts and family safety (or by clicking on user accounts, if you are connected to a network domain), and then clicking user accounts.

  2. click on Manage another account. If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  3. click on create a new account.

  4 type the name that you want to assign to the user account, click an account type, and then click create an account.

  If the problem persists in safe mode, I would say allowing you to run the auditor of file system (CFS) analyze and check if if helps solve you the problem.

  To run the Scan SFC follow these steps:

  1. Click Start and type cmd in the box start the search.

  2. right click on cmd in the list programs and then click Run as administrator.

  If you are prompted for an administrator password or a confirmation, type your password or click on continue

  3. at the command calls, the following line and press ENTER: sfc/scannow

  Access the link below to learn more about the execution of the System File Checker:

  http://support.Microsoft.com/kb/936212

  For question connects to open Internet Explorer, I would say to run the Internet Explorer troubleshooting utility built into Windows 7 and check to see if it helps you solve the problem.

  To run the Internet Explorer troubleshooter, follow these steps:

  1. close all programs.

  2. click on start and then click Control Panel.

  3. under system and security, click on find and fix problems.

  4. in the left pane, click View all.

  5. click on Internet Explorer Performance. This opens a new window.

  6. click Next.

  7. the resolution of the issues will take place and try to solve the issues raised everything automatically. Click Close.

  After the store has run successfully, check to see if you receive the same error.

  Also access the link below and follow the steps to solve the problem with Internet Explorer.

  http://Windows.Microsoft.com/en-us/Windows7/tips-for-solving-problems-with-Internet-Explorer

  Hope this helps and return to view the results.

  Thank you and best regards,

   

  Srinivas R

  Microsoft technical support.

  Visit our Microsoft answers feedback Forum and let us know what you think

• By pass Windows 7 How secure password if bluescreen doesn't work anymore?

  My password stopped working or it seems he is off by a letter or a number.  I can't understand.
  My company laptop has often tried to get me backup files to their system, but I'm on my own
  CD, I had problems since then and it's the final straw. If I'm wrong, I apologize, but
  don't think.  Unfortunately, I didn't know a reset disk and buy the laptop ready for Windows 7.
  The store where I buy the laptop says that it would cost only $15, but after the call to the technology company
  they gave me another number and said they would have to remove all the files if they were to the reset disk.
  They also feel that the other support dept could give me my password by telephone.

  This makes me think they yes they could change the password and want me back up my files
  on their program to recover my password. Of course they are not open on Sundays, but the Tech dept
  is.  So, I'll call Monday, to see what will happen.

  Thought I'd share this experience.

  Here you go:

  1. Set your BIOS so that it uses the DVD drive as its primary boot device.
  2. Start the computer with your Windows 7 repair CD.
  3. Press a key when prompted to boot from the DVD.
  4. Select 'PC Repair' in the menu.
  5. Select 'Repair' when prompted.
  6. When you are prompted, select System Restore.
  7. Configure Windows to a point when your password has always worked.
  8. Plan ahead a little and create, test and document an alternative admin account, same as you have a spare emergency House key.

• I have a brand new installation of 13 PS elements. How I have difficulty drag and drop doesn't work is not on my system Windows 7 Pro 64-bit?

  I just installed PS 13 items on my system Windows 7 Pro 64-bit. Mouse clicking works, but how I have difficulty drag and drop works do not? For example, I can't create a selection rectangle or drag the sliders or move the panels of the tool or resize a text box, I tried as an administrator (it does not help). Same "ClickLock" in Windows does not drag. No other program on my machine has problems. Help!

  Reset preferences did not set anything. Even reinstall 13 elements PS has not fixed anything.

  However, late breaking new...

  See other discussions on this topic, which suggests a conflict of startup program that might be the cause, I did some experiments.

  All the functions of the mouse to 13 PS elements worked well if I started my Windows 7 in "safe" mode
  So, back in 'normal' mode, I manually disabled all startup programs. Returned mouse problem.
  Enter the control panel "services", I disabled 'Synergy' (a program that allows me to share my keyboard and mouse between two computers). Fixed a problem.
  The reactivation of all the startup programs while leaving a synergy service is turned off, everything works still fine.
  Start all programs present and re-empowerment synergy, but turned off its 'high privilege check box. Everything is still fine.

  Conclusion: Synergy in high privilege mode service was the only culprit.
  Synergy in non high mode allows my PS 13 items and keyboard/mouse sharing to coexist.

  The strange thing is that only PS elements 13 was affected by synergy. I detect no problems anywhere else. But it doesn't matter; the new arrangement (no high synergy) works fine for everything.

  Al

• Tab doesn't work does not correctly for Datagrid ComboBox ItemEditor

  When you run the app type a1 in the discovery of an App combo box and then type the tab key.

  Click the 3rd row in the column as Bs and show a combobox.

  Type a3 and her and then press ENTER.  Note that the A3 is saved under the selected and recorded on the dataprovider element

  Press the return key back key and press ENTER.  Note that the null value is saved and that nothing is selected.

  Type a3 again and press ENTER.

  Hit of the new backspce, but this time typing the tab key.  Note that the previous value is returned.  Oops.

  {Code}

  <? XML version = "1.0" encoding = "utf-8"? >

  "" < s:Application xmlns:fx = "http://ns.adobe.com/mxml/2009"

  xmlns:s = "library://ns.adobe.com/flex/spark".

  xmlns:MX = "library://ns.adobe.com/flex/mx".

  xmlns:vo = "valueObjects.*".

  Width = "100%" height = "100%" >

  < fx:Script >

  <! [CDATA]

  Import mx.collections.ArrayCollection;

  Import mx.events.FlexEvent;

  protected function aCBLabel(item:Object):String

  {

  If (item! = null)

  Return item.name;

  on the other

  Return ' ';

  }

  protected function bDG_creationCompleteHandler(event:FlexEvent):void

  {

  bDG.selectedIndex = 0;

  }

  protected function bAFormat(item:Object,_column:DataGridColumn):String

  {

  If (item [column.dataField]! = null)

  return item [column.dataField] .name;

  on the other

  Return ' ';

  }

  []] >

  < / fx:Script >

  < fx:Declarations >

  < vo: ADto id = "aDto" / >

  < vo: BDto id = "bDto" / >

  < s:ArrayCollection id = "aList" >

  < vo: ADto >

  < vo: id > 1 < / vo: id >

  < name: vo > a1 < / vo: name >

  < vo: bs >

  < vo: BDto >

  < vo: id > 1 < / vo: id >

  < vo: aDto >

  < vo: ADto >

  < vo: id > 1 < / vo: id >

  < name: vo > a1 < / vo: name >

  < / vo: ADto >

  < / vo: aDto >

  < / vo: BDto >

  < vo: BDto >

  < vo: id > 2 < / vo: id >

  < vo: aDto >

  < vo: ADto >

  < vo: id > 2 < / vo: id >

  A2 < vo: name > < / vo: name >

  < / vo: ADto >

  < / vo: aDto >

  < / vo: BDto >

  < vo: BDto >

  < vo: id > 0 < / vo: id >

  < / vo: BDto >

  < / vo: bs >

  < / vo: ADto >

  < vo: ADto >

  < vo: id > 2 < / vo: id >

  A2 < vo: name > < / vo: name >

  < vo: bs >

  < vo: BDto >

  < vo: id > 3 < / vo: id >

  < vo: aDto >

  < vo: ADto >

  < vo: id > 3 < / vo: id >

  < name: vo > a3 < / vo: name >

  < / vo: ADto >

  < / vo: aDto >

  < / vo: BDto >

  < vo: BDto >

  < vo: id > 0 < / vo: id >

  < / vo: BDto >

  < / vo: bs >

  < / vo: ADto >

  < / s:ArrayCollection >

  < s:ArrayCollection id = "Ballista" >

  < vo: ADto >

  < vo: id > 1 < / vo: id >

  < name: vo > a1 < / vo: name >

  < / vo: ADto >

  < vo: ADto >

  < vo: id > 2 < / vo: id >

  A2 < vo: name > < / vo: name >

  < / vo: ADto >

  < vo: ADto >

  < vo: id > 3 < / vo: id >

  < name: vo > a3 < / vo: name >

  < / vo: ADto >

  < / s:ArrayCollection >

  < / fx:Declarations >

  < source = fx:Binding "aCB.selectedItem as ADto" destination = "aDto" / > "

  < s:Form id = "AForm" width = "700" height = "170" >

  < s:layout >

  < s:BasicLayout / >

  < / s:layout >

  < s:HGroup x = "0" y = "50" width = "670" height = "60" >

  < s:Label height = "25" fontWeight = "bold" = "find a" verticalAlign = "middle" / >

  < s:ComboBox id = "aCB".

  prompt = "enter or select a name.

  labelFunction = "aCBLabel."

  x = "110" y = "10" width = "375" >

  < mx:ArrayCollection id = list "asList" = "{aList}" / >

  < / s:ComboBox >

  < / s:HGroup >

  < / s:Form >

  < mx:DataGrid id = "bDG" x = "10" y = "140" width = "450" height = "200".

  Editable = "true".

  dataProvider = "{aDto.bs}" "

  creationComplete = "bDG_creationCompleteHandler (event)" >

  < mx:columns >

  < mx:DataGridColumn id = "bidDC".

  headerText = "id".

  Editable = "true".

  dataField = "id".

  editorDataField = 'value '.

  Width = "50" / >

  < mx:DataGridColumn id = "bNameDC".

  headerText = "Like Bs"

  Editable = "true".

  dataField = "aDto.

  labelFunction = "bAFormat."

  editorDataField = 'value '.

  Width = "150" >

  < mx:itemEditor >

  < fx:Component >

  < s:MXDataGridItemRenderer implements = "mx.managers.IFocusManagerComponent" >

  < fx:Script >

  <! [CDATA]

  Import mx.collections.ArrayCollection;

  Import mx.controls.dataGridClasses.DataGridListData;

  Import mx.controls.listClasses.BaseListData;

  Import mx.events.FlexEvent;

  Import spark.events.DropDownEvent;

  Import spark.events.IndexChangeEvent;

  [Bindable]

  public var down: ArrayCollection;

  protected function cb_InitializeHandler(event:FlexEvent):void

  {

  Low = outerDocument.bAList;

  aDto = outerDocument.bDG.selectedItem.aDto;

  If (aDto! = null)

  {

  var t:ADto;

  for (var i: int = 0; i < bAs.length; i ++)

  {

  t = low [i];

  If (aDto.id is t.id)

  {

  cb.selectedIndex = i;

  break;

  }

  }

  }

  }

  override public function setFocus (): void

  {

  cb.setFocus ();

  }

  public function get value (): ADto

  {

  If (cb.isDropDownOpen)

  cb.closeDropDown (true);

  cb.validateNow ();

  aDto = cb.selectedItem as ADto;

  return aDto

  }

  protected function cb_closeHandler(event:DropDownEvent):void

  {

  aDto = cb.selectedItem as ADto;

  }

  []] >

  < / fx:Script >

  < fx:Declarations >

  < vo: ADto id = "aDto" / >

  <! - Place non-visual elements (e.g., services, items of value) here - >

  < / fx:Declarations >

  < s:ComboBox id = "cb".

  Width = '100% '.

  prompt = "{aDto.Name}" "

  dataProvider = "low" {} ".

  labelField = 'name '.

  Initialize = "cb_InitializeHandler (Event)" "

  Close = "cb_closeHandler (Event)" >

  < / s:ComboBox >

  < / s:MXDataGridItemRenderer >

  < / fx:Component >

  < / mx:itemEditor >

  < / mx:DataGridColumn >

  < / mx:columns >

  < / mx:DataGrid >

  < / s:Application >

  {Code}

  {Code}

  package valueObjects

  {

  import com.adobe.fiber.services.IFiberManagingService;

  import com.adobe.fiber.valueobjects.IValueObject;

  Import mx.collections.ArrayCollection;

  Import valueObjects.BDto;

  import com.adobe.fiber.core.model_internal;

  Using namespace model_internal;

  public class com.adobe.fiber.valueobjects.IValueObject implements ADto

  {

  private var _internal_id: int;

  private var _internal_name: String;

  private var _internal_bs: ArrayCollection collection;

  model_internal var _internal_bs_leaf:valueObjects.BDto;

  public void ADto()

  {

  }

  public function get id(): int

  {

  Return _internal_id;

  }

  public function get name(): String

  {

  Return _internal_name;

  }

  public function get bs(): ArrayCollection collection

  {

  Return _internal_bs;

  }

  public function set id(value:int): void

  {

  var oldValue:int = _internal_id;

  If (oldValue! == value)

  {

  _internal_id = value;

  }

  }

  public function set name(value:String): void

  {

  var oldValue:String = _internal_name;

  If (oldValue! == value)

  {

  _internal_name = value;

  }

  }

  public function set bs(value:*): void

  {

  var oldValue:ArrayCollection = _internal_bs;

  If (oldValue! == value)

  {

  If (value is ArrayCollection collection)

  {

  _internal_bs = value;

  }

  else if (value is table)

  {

  _internal_bs = new ArrayCollection (value);

  }

  else if (value == null)

  {

  _internal_bs = null;

  }

  on the other

  {

  throw new Error ("value of bs should be a collection");

  }

  }

  }

  private var _managingService:com.adobe.fiber.services.IFiberManagingService;

  public function set managingService(managingService:com.adobe.fiber.services.IFiberManagi_ngService):void

  {

  _managingService = managingService;

  }

  }

  }

  {Code}

  {Code}

  package valueObjects

  {

  import com.adobe.fiber.core.model_internal;

  import com.adobe.fiber.services.IFiberManagingService;

  import com.adobe.fiber.valueobjects.IValueObject;

  Import valueObjects.ADto;

  Import mx.collections.ArrayCollection;

  Using namespace model_internal;

  public class com.adobe.fiber.valueobjects.IValueObject implements BDto

  {

  private var _internal_id: int;

  private var _internal_aDto: ADto;

  private static var emptyArray:Array = new Array();

  public void BDto()

  {

  _internal_id = 0;

  }

  public function get id(): int

  {

  Return _internal_id;

  }

  public function get aDto(): ADto

  {

  Return _internal_aDto;

  }

  public function set id(value:int): void

  {

  var oldValue:int = _internal_id;

  If (oldValue! == value)

  {

  _internal_id = value;

  }

  }

  public function set aDto(value:ADto): void

  {

  var oldValue:ADto = _internal_aDto;

  If (oldValue! == value)

  {

  _internal_aDto = value;

  }

  }

  private var _managingService:com.adobe.fiber.services.IFiberManagingService;

  public function set managingService(managingService:com.adobe.fiber.services.IFiberManagi_ngService):void

  {

  _managingService = managingService;

  }

  }

  }

  {Code}

  the tab wasn't working because because he wasn't changing the selection and just leave the drop-down list box.  For example, in the value of the Add function if (cb.textInput.text == "") cb.selectedIndex = - 1;  This will change the selection as you wish and solve the problem.