Third-party licenses and Activation Toolkit for Labview 8.5

Similar Questions

• Internet Toolkit for LabVIEW 2012 64-bit

  I have an application which is currently written in LabVIEW 2009. It requires the Internet. I try to open it in 2012 of LabVIEW (64-bit) (using Windows 7 64-bit). LabVIEW 2012 does not find the box at Internet tools since he has been deprecated in LabVIEW 2012, so LabVIEW complains.

  So I downloaded the toolkit LabVIEW 2012 Internet and tried to install it. When the Setup program tries to run, it stops with an error message that says:

  "NEITHER LabVIEW 2012 (32-bit) or more must be installed before installing OR.
  2012 Internet Toolkit LabVIEW. »

  Can someone tell me where I can find the Internet Toolkit for LabVIEW 2012
  (64 bit)?

  Thank you

  -Ray

  Since you seem to understand that the Internet Toolkit has been deprecated, I do not understand your question. There is no 64-bit version of the tool. In fact, it has very few tools that do not have a 64-bit version. In order to use the old, 32-bit version, you must use it with the version 32-bit LabVIEW, as said the message.

• Pilot third party JDBC and domain Extension

  Hi everyone, I am using a third-party driver to acess some inherited in my company database. I'm adding them in WebLogic (v. 10.3.3.0) Classpath by setting the EXT_PRE_CLASSPATH in the setWLEnv.sh file. Everything worked well until now, until I had to extend my domain to account for new settings. The Configuration Wizard hangs in the Middle saying: "a fatal error has occurred. This Application will end '. By inspecting the logs, I see the wizard attempted to get my Data Source that uses the third-party driver and could not find the class driver. I would like to know if there is a better way to add the library to the Weblogic classpath or someway to work around this problem in the extension. In my current situation, I have to delete the data source, in the field and reconfigure the data source, which is big trouble!
  Any help would be appretiated! Thank you
  
  PS: I also tried to add the third-party driver JAR in the CLASSPATH in config.sh file, but unfortunately, the error was the same!

  You can place your jars in the lib of the domain directory.

  WebLogic uses a separate class loader to load classes from the domain's lib directory. This classloader
  is a child of the system class loader and a relative of the Chargers for custom classes application. Classes and
  resources in any file .jar in the directory are automatically available for all applications.

  Note, however, that the lib classloader field does not support the redeployment, dynamic a reload or FastSwap and can not
  refer directly to the code in the application classloaders. But I think that this is not a problem, you just want your
  third driver JDBC to be available for your applications.

• I plugged my charger 6s to a third party iphone and now it is loading slow and very rapid battery loss

  I plugged it to the third-party charger it says it only is not available or not supported, but I kept it plugged, but he was in charge very slowly. The morning I olugged my original charger but it does not charge as before

  There is a chip on the motherboard that can be fried when you use Chargers not apple. It's called U2 chip. I don't know if apple would warranty for you or not, but I'll probably try. If they are used, you can try to get it fixed, but you might have to send it because it's a very advanced repair your local MOM and pop repair shop could not do.

• Report Generation toolkit for labview 2010

  H all.

  I'm looking to download the 2010 labview report generation tool. When I proceed to download the Toolkit on the site of the national instrumnets, it says that I need LabVIEW 2011 or later in order to install it.

  Is there a version of this for labview report generation 2010 toollkit and can anyone provide a link maybe?

  Thanks for reading.

  Try this: [link removed, can be found on ni.com/downloads OR software downloads, the LabVIEW Report Generation Toolkit 2010 is available to customers with program Service Standard here: http://joule.ni.com/nidu/cds/view/p/id/3247/lang/en, other clients can communicate directly with NOR]

• modulation toolkit for labview for embedded controller PXI-8106

  Hello

  I have an on-board controller: 8106 PXI OR PXI 5661 and 5671. He came with DAMA RFSG but not the Modulation Toolkit (TM). Now I cannot access some screws RF Toolkit as NI DAMA close.vi etc. I opened a code that uses this DAMA close.vi and since I donot have probably MT, I can't run since the claim code to choose the path!

  I checked for the TM in the start menu-> all programs-> national instruments-> modulation but in vain. Also, I opened MAX and under "Software", I could find DAA, pilots RFSG etc but not the Mt.

  When I checked online it says I have to buy the cd/dvd of MT. If I do, how I run on my controller?  What are my other options?

  PK

  Hello

  I think I solved the above problem. I had to install the RFSG and ACD for labVIEW. For some reason, the equipment was delivered to me with DAMA and RFSG, but only for C. This part was misleading because I saw on my National Instruments system but not the DAMA DAMA and RFSG vi. Also spectral measurement Toolkit (SMT) has not been installed. SMT is a MUST for the good functioning of the RF VSA. After you install the required drivers and tool boxes, I am able to run and use the VI completely.

  Thanks for your support Abhishek.

  PK

• What is the serial key and activation key for Microsoft professional win7 64 bit?

  Original title: WHAT IS THE SERIAL KEY AND ACTIVATION KEY TO PROFFESNIOL MS WIN7 64 BIT.

  ME TELL WHAT IS THE SERIAL KEY AND ACTIVATION KEY TO PROFFESNIOL MS WIN7 64 BIT

  REAL NAME = X 17 - 59186.iso

  ME TELL WHAT IS THE SERIAL KEY AND ACTIVATION KEY TO PROFFESNIOL MS WIN7 64 BIT

  REAL NAME = X 17 - 59186.iso

  You will need to buy a license to activate this copy of Windows 7 Professional. It doesn't have a product key, you will need to have that already.

  You can even buy an edition much cheaper if you like Home Premium, since it will be for domestic use.

  Because Windows 7 is in limited stock because Microsoft ended sales in October 2013, this created demand due to its rarity. This means the retail boxed copies request a bonus, while the OEM System Builder copies remain affordable.

  Full version (retail):

  -Includes the rights of transfer to another computer.

  -Does not require a qualifying earlier version of Windows.

  -Expensive

  Upgrade version (detail):

  -Includes the rights of transfer to another computer.

  -require a qualifying earlier version of Windows.

  -Expensive, but less expensive full version

  OEM System Builder version:

  The OEM of Windows 7 versions are identical to the versions commercial full license with the following exception:

  -OEM versions don't offer any free direct support from Microsoft technical support Microsoft

  -OEM Licenses are tied to the computer first you install and activate it on

  -OEM versions allow all hardware upgrades except for an upgrade to a different model motherboard

  -OEM versions does not move directly from an older Windows operating system

  There is nothing wrong to use it too, especially that all future versions of Windows will be full versions.

  Where can I still get Windows 7?

  Full version-

  Microsoft Windows 7 Home Premium

  Full version-

  Microsoft Windows 7 Ultimate

  Full version-

  Microsoft Windows 7 Professional

  Version upgrade-

  Microsoft Windows 7 Professional upgrade

  Version upgrade-

  Microsoft Windows 7 Ultimate Upgrade

  Version upgrade-

  Microsoft Windows 7 Home Premium Upgrade

  Family Pack:

  Microsoft Windows 7 Home Premium Upgrade Family Pack (3 users)

• How to combine 3rd party install and install generated by LabVIEW?

  I am developing a software that controls a thermal regulator via a USB cable connection. I use NI-VISA to communicate with him. The controller uses a USB chip, for which a 3rd party USB driver is necessary. (I downloaded from here: http://www.ftdichip.com/Drivers/D2XX.htm)

  Now the software is finished, I created the application successfully. In my Installer, I am hoping to enter the 3rd USB driver so only installer does all this, instead of running 2 installers.

  LabVIEW Installer construction specification property dialog seems to support only the drivers of OR. Is it possible to include the USB driver in my Installer?

  Thanks in advance

  TailOfGon wrote:

  1 is simple. Use the executable installation program provided by the Web site. But I do not know how best to include in my LabVIEW App Installer.

  We don't know if you're aware of this, but you can configure the installation program to include the executable files and then run the file at the end of the installation. It should be in the Advanced page settings of the generation.

  Also, there are 3 party like Inno Setup installer programs, which have more options, and that you could use to encapsulate two installers. I did use one of those, but I know other people who prefer them.

• I bought a 3 system Windows 7 upgrade and activation failed for the 3rd system. How can I fix it?

  I'm fairly certain that only 2 of the improvements have been used to move Windows 7 Vista systems. Now I try with a 3rd system, originally of XP but activation fails.

  If you have the 'Family Pack' for Home Premium, its not uncommon for that to happen. Try to activate by phone.

  How to activate Windows 7 or Vista manually (activate by phone)
  http://support.Microsoft.com/kb/950929/en-us

  1) click Start and in the search for box type: slui.exe 4
  (2) press the ENTER"" key.
  (3) select your "country" in the list.
  (4) choose the option "activate phone".
  (5) stay on the phone * do not select/press any option * and wait for a person to help you.
  (6) explain your problem clearly to the support person.
  (7) the person must give you a confirmation ID, copy it down on paper,
  (8) check that the ID is correct in reading the support person.
  (9) to enter the ID number, then click 'Next' to complete the activation process.

  ----------------------------  Alternatives -------------------------------------

  To enable the use of the phone

  1. open Activation of Windows by clicking on the Start button, right click on computer, clicking Properties.
  then by clicking on activate Windows now. ?

  2. click on show me other ways to activate.

  3 type your Windows 7 product key, and then click Next.

  4. click on use the automated telephone and then click Next.
  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.

  5. click on the location nearest you from the drop-down list, and then click Next.

  6. call one of the available phone numbers listed. An automated system will guide you through the activation process.

  7. When prompted, enter the installation ID that is listed on your screen in your phone keypad.

  8 Note the confirmation ID the phone system gives you.

  9. under the terms of step 3, type the confirmation ID in the space provided, click Next, and then follow the instructions.

  10. If the activation is not successful, stay on the line to be transferred to a product activation agent who can help you.

  How to contact a Microsoft Product Activation Center by phone
  http://support.Microsoft.com/kb/950929

  Microsoft Activation centers worldwide telephone numbers:
  http://www.Microsoft.com/licensing/existing-customers/activation-centers.aspx
  (This site is for activating Volume License, but if you call, they will help you)

  The phone number is not working:
  Microsoft Wordwide contacts: http://www.microsoft.com/worldwide/default.aspx

  Register Windows 7
  http://Windows.Microsoft.com/en-us/Windows7/help/register
  Register Windows 7 and you automatically receive a series of three welcome to Windows e-mails
  filled with tips, creative tips and other information to you help get the most out of Windows 7.
  You also get a subscription to the monthly newsletter of Windows Explorer,
  where you will find other tips and tricks, as well as special offers.

  Activation and registration of a Microsoft product
  http://support.Microsoft.com/?kbid=326851
  Windows activation: (888) 571-2048

  Learn about Activation:
  http://TechNet.Microsoft.com/en-us/library/ff793423.aspx

  J W Stuart: http://www.pagestart.com

• MATRIX Toolkit for LabVIEW 2012 for LEGO Mindstorms Installer?

  Hello

  

  Help, please

  Hi 40123157,

  MATRIX support is included in the competition MINDSTORMS Kit. Here you can find the box tool from last year: http://www.ni.com/download/labview-ftc-toolkit-2012-2013/4331/en/.

  An updated version of this tool for 2014-2015 aims to be released at the end of August.

• License and integrations (Enterprise for virtualization)

  Hello

  I'm looking on the licensing information on dell Foglight for Enterprise Virtualization,

  The license of the company includes all agents of integration? (bundle)

  Monitoring of the performance of Microsoft Active Directory Monitoring of the performance of Microsoft Exchange Foglight APM Foglight for the performance of the database Foglight for storage management

  Thank you

  Best regards

  Claudio

  Can you please send me directly with your location so that we can connect you to the right person for this?

  Thank you

  Golan

  [email protected]

• License and activation key

  Currently on a Macbook pro and purchased plan monthly photography.  Whenever I open the application, I get a message that testing programs is over.  I tried many ways to activate them, but in vain.  Can anyone help?

  Tried clouds creative signature and signature in?

  https://helpx.Adobe.com/creative-cloud/help/sign-in-out-activate-apps.html

  If Yes?

  Have you checked with the Hosts file for Adobe entries?

  In the opposite case.

  Follow the procedure below:

  (1) right click on the Finder on dock icon and select the option "Go - To Folder."
  (2) you will get a text box, type in below mentioned command and then press 'return '.

  / etc

  (3) it opens the etc folder, please search for the file named ""host " and copy the same office screen.it"

  (4) double click on the Hosts file, it will open it with TextEdit.

  Let me know if you see any Adobe related as entries in the Hosts file 127.0.0.1 activate.adobe.com... etc?

• Multisim API toolkit for LabVIEW works not

  
  

  Sorry, I don't have the appropriate license, that's why it does not work...

  If someone is able to do (maybe a moderator): Please remove the post. I can't.

  Ussr123.

• Generating license file info in the 3rd party licensing Toolkit

  Hello

  I use LV 2010 and the award of third-party license and Activation Toolkit:

  http://sine.NI.com/NIPs/CDs/view/p/lang/en/NID/209107

  (requires:http://decibel.ni.com/content/docs/DOC-9674)

  I see 'info license file' is a required typedef entry on a large number of entries, but I don't see any method for the info inside. I understand the password and the path, but that "handle" refers to?

  

  My search of the articles of the or the examples was unsuccessful, pointers or sample code would be appreciated.

  Thank you

  Mello

  All jokes aside, I'm sorry for the confusion... This may not have been the most intuitive choice.

  We actually have a (complete with forums) community group dedicated to this toolbox, if you are interested at all. (I know, the options of collaboration more...)

• Where to install third-party drivers for LabVIEW

  Hi, I have not used LabVIEW in several years.

  I downloaded many third party drivers and saved locally on my C:\.

  Where should I move these .lib files so that I can use their throught it works Palette?

  Is there a certain structure should I use when registering these?

  Also, what is the difference between user.lib & instr.lib files?

  I tried to find the folder as shown in the following tread but I can't seem to find the file:

  How to install my third-party instrument Drivers?

  It is what the recommended action:

  

  Can anyone help?

  Kind regards

  Seamus

  InStr.lib is for instrument drivers.  User.lib is your own private libraries.

  I'm guessing that you are on a 64 bit OS.  So you should look in C:\Program Files (x 86) \National Instruments\LabVIEW (20XX) \instr.lib