This computer has an add-in graphics card and the monitor cable is plugged into the integrated video connector.

Similar Questions

• Windows Vista does not recognize the graphics card and the broadband

  Original title: recognize the graphics card and the broadband connection

  Windows vista can't recognize the graphics card and the broadband connection in the Dell laptop

  Hi mfadhelmu,

  1. When did you start to question?

  2. you remember to make changes to the computer before this problem?

  3. you receive messages or error codes?

  4. have you updated all device drivers?

  You can try to launch the Fixit and see if it helps:

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Hope this information is useful.

  Jeremy K
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

  If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message. Marking a post as answer, or relatively useful, you help others find the answer more quickly.

• Satellite Pro M70: upgrade graphics card and the disk is not in 'my computer '.

  Hello

  I have the M70. and is it possible that I can up grade the grafix chip? becuse I like to play games on the move... and im at the end of half-life 2 and also it keeps Freezin' and its very slow! -anyyone help with this?

  and

  I have no hard drive... I go to 'My computer' and its only one hard drive and emulation 2 readers... im another lack... could I have help please [screenshot attached!] - "http://i18.photobucket.com/albums/b140/noodle666/NoDiskDrive.jpg".

  Thank you

  Hello

  1.) No, it is not possible to update the graphics card.

  2.) you have installed several other applications (disk emulation software) which may have a negative influence on the player display. But I found some info that might help you:
  http://support.Microsoft.com/default.aspx?scid=kb;en-us;320553

• My computer freezes when playing mass effect, I changed graphics cards and the game lasted 2 hours of game, then it froze again.

  It's a pc zoostorm, with 2 9800gt graphics cards, it should be able to support these games however at random intervals the pc would freeze with no error message.

  I have:
  -graphics cards to switch
  -updated from xp to vista
  -a got the update for directx
  -downloaded all the drivers from nvidia, even if I get an audio download that says it cannot find compatible devices when you search for the motherboard.

  Hello

  Just that your graphics card does not support the game. Try to update the drivers for your graphics card, it will work.
   
  Also try to reduce the check and accerelation of material:

  http://support.Microsoft.com/kb/263039

• Qosmio X 300 - 14 p: problems of graphics card and the vertical stripes on the screen

  Hello

  2 days, after a long session laptop in many hours a lot, all of a sudden after the game for 2 hours
  Patrician 4 addon, it crushed in a strange and never seen before in a way:

  The screen would show the strange and weird color under all its forms rushing on ther display. You can't recognize anything, and after a few seconds of this screen and the x 300 - 14 p completely froze / crashed (hung - no reaction on anything except power plug pull or pressure on the button 5 seconds walk / stop ther).

  I was scared because it looked like to me a serious problem of graphics (nvidia chip) card or display.

  I was hoping it was because of the heat (even if I have a powerful block of cooling below the laptop and the heat shouldn't be a problem).

  Next day (yesterday), I launched the game immediately after the start, and after a few seconds the same crash appeared again with the same strange video glitches (never seen anything strange like this before).

  I immediately made the 5 second power button press reset. and then, when the first splash screen appears (the bios display indicator and the loading/splash screen), there was like 2-7 white stripes vertical (on black background) on the right side of the screen.
  They would not move or go away.

  I immediately turned off the laptop and it is off since then.

  For me this looks really serious, as if each chip nvidia (Geforce 9800 GTX) is broken or the display.

  Someone knows something about it?
  Everyone knows about this problem?
  Who knows more?

  I know, I can now connect an external monitor.
  If there is no problem, this should mean that it is a x 300 display problem

  If the problem also appears on the external monitor, the nvidia gpu chip. At least that would be my guess.

  Anyone have an idea about it, what it might be and what I could do?

  (I'm afraid to send him only the x 300 in to toshiba for fixing is not worth, because it's quite old)
  (it was purchased new in June 2009). fixing, it is probably too expensive.

  Any ideas on HCet problem?
  I've never had before.
  Who can help?

  Thank you

  PS:
  I was thinlking to buy the new qosmio X 870, but I just saw that there is no express card slot, I need for different expansion modules (like the tv and video equipment, more etc.pp cards e-sata).

  Without an express card slot I would not buy any laptop computer, I need urgently this slot machine (it's like a pci-express slot card connection in a desktop pc).

  For me the express card slot is vital.
  Never saw so many bad books.

  If io may need my x 300 for quite awhile,
  But what I would do abpout this weird new chip/video display problem?

  Hello

  I agree with you that it looks like a GPU problem.
  This means that it is the worst case, because in most cases the motherboard needs to be replaced
  Even if the GPU would be replaceable, this piece would be very expensive
  However, you can get in touch with a local ASP from Toshiba and can ask how it is

  Good luck

• Upgrade the graphics card and the power supply on a Pavilion p6823w - compatibility?

  Hello, everyone! After purchasing my HP not too long ago, I decided that I wanted to get updates for it. I intend to turn it into a computer game later, but for now I start small.

  I'm still a little wet behind the ears when it comes to computer hardware, so I would greatly appreciate any input on my decisions for improvement - especially if my power supply and graphics card will adapt and be compatible or if the marks are bad.

  Graphics card:

  PowerColor Radeon HD 6850 1 GB

  http://www.Newegg.com/product/product.aspx?item=N82E16814131374

  POWER SUPPLY:

  Corsair 500W CX500

  http://www.Newegg.com/product/product.aspx?item=N82E16817139027

  Here is the specific computer I have, for reference:

  http://h20000.www2.HP.com/bizsupport/TechSupport/document.jsp?lang=es&CC=ve&TaskID=120&prodSeriesId=...

  Thanks in advance!

  Hello

  I don't foresee any problems with your choices.

  Relatives on the slot PCI-E x 16 must be vacant.  Examine the characteristics of the motherboard.

  These "how-to" HP articles should be useful.

  TIP: Unlock and slide the optical drive forward before you remove and install the power supply. This helps facilitate the removal and installation of the power supply, but it is not mandatory.

• Qosmio G40-127 - the graphics card and the screen Tower freezer

  Hello.

  I have a Toshiba Qosmio G40-127 and I have a problem with the graphics card, this freezer and the Tower of the screen for 1-2 seconds sometimes when I play World of warcraft
  Why is it like this and y at - it of updates for my graphic driver?

  The same happens when you use your laptop to watch TV or other usual stuff (internet, office)?

• Compatible TPM cannot be found on this computer. Verify that this computer has a TPM 1.2 module and it is enabled in the BIOS.

  I just installed the version of Windows 7 Ultimate, because I need to configure BitLocker to file encryption.  I get this error when I try to turn it on.  How can I configure a secure platform module?

  http://www.SevenForums.com/tutorials/4681-BitLocker-Drive-Encryption-Windows-7-drive-turn-off-no-TPM.HTML releasing it's easy: with Windows | ActiveWin | Laptops | Microsoft MVP

• What graphics card and the amount of video memory uses the Satellite A80

  Hello.
  Answer please. I have Satellite PSAA8E-077017DU. What video card on this model? And use of the video card MB maximum how on this model.
  Thank you to.

  Hello

  I googled a little and you should know that the series of laptops have been delivered with a different hardware configuration.
  The number you placed said nothing to me and that's why it would be very interesting to know the additional name of mobile; Satellite A80 - xxx

  However, some of these units are Mobile Intel Express Chipset AlvisoGM up to 128 MB of memory sheared 915GM supported.

• Is it possible to update the graphics card in the Satellite A200-195

  Is it posible to upgrade this card for me to play the game of MSTS?

  Usually it of not possible to update the graphics cards installed in notebooks!
  Laptop technology is simply different!
  The graphics card is attached to the motherboard and it of not possible to remove it in a simple way.

  I have always recommended to use the computer to play the game!
  If you need the computer for hardcore games you should buy a desktop computer.
  Why? Because the latest games need for most fastest graphics card and the desktop PC can be upgraded much easily as a laptop.

  But finally it of your choice what you use ;)

  Best regards

• Graphics card and power supply upgrade help

  I wanted to update my current graphics card and the power supply. I'm looking to spend under $ 300.00. Any help is greatly appreciated.

  Data sheet:

  HP p6714y Amd Anthlon II x 4 640

  4 GB of Ram

  1 TB harddrive

  OPERATING SYSTEM

  Windows 7 64 bit

  Middle size ATX case

  250w PSU

  Nvidia Geforce 6150SE integrated graphics

  1 PCI Express x 16

  2 PCI Express x 1

  1 PCI

  Thanks for the info,

  I was mainly looking for run EVE Online and some other MMORPG. So any graphics card capable of handling most of the MMORPG will be fine.

  I'll look into the graphics cards you mention also. Thank you!

• Win7 has exchanged information on the material between the integrated video card and add on video card - need to share in return. Registry hack?

  A remote desktop client from one office to another from 10 feet.  Now Win7 has become confused about the video card.  When you use the add on the map with two monitors on DVI cables, Windows thinks that he uses the onboard video (vga on motherboard).  When you use the onboard vga video, Win7 think he's using the add on video card.
  Windows has exchanged information on video cards.  Is there a way to hack the registry and exchange their return?  Or clear the entries and have windows discover video cards again?
  So far, I pulled the add on the map but Win7 still thought he used it.  I checked the BIOS settings and display settings.  Desktop is a Dell OptiPlex 980.  Using Win7 enterprise.
  Customer does not do without office while it would be re-created, I was looking for a solution.

  They would extend the desktop between the two monitors, but now it reflects only the monitors because he thinks that it's using the vga output (when he really uses the add on the map).  Discovered this when you look at the description of the graphics cards and monitors trying each installer.

  Hello Matt,

  Thanks for posting your query on the Microsoft Community.

  I would like to inform you that, the question you have posted in the community is more on the management of the computer hardware rather than the Windows operating system. So, I recommend you contact the manufacturer of the computer hardware, which gives you a better opportunity to get rid of the problem.

  Dell Community

  Hope this information is useful. Let us know if you need help with Windows, we will be happy to help you.

• HP Pavilion Slimline s5615uk: upgrade I can add a graphics card to an HP Pavilion Slimline s5615uk-m

  Can I add a graphics card? If Yes, which?

  @DavidMW You are welcome.

  Please do not hessitate to ask questions.  This is the reason why I'm here.

  Most of the games are today video very intensive.  This is why your computer begins to lag when the game gets busy.  A video card would be a good thing, but will be much easier to install more memory.  This is the memory that is recommended by Crucial memory.  The max memory is 4 GB, however.  You would be better served if you decide to upgrade the memory to buy 2 x 2 GB memory new and remove the old.  Another way to increase performance of the system is to add an SSD.  Take a look at the recommended by Crucial SSD.  They make great products for OEM computers.  My HP laptop game boots Omen is less than 7 seconds and increases the speed of loading games with the 256 GB SSD.

  I have to be honest with you.  The Slimline models simply are not meant for the game; even

  Please click on the button + Thumbs up if I helped you and click on accept as Solution If your problem is resolved.

• Equipped with a sound card has lost after upgrading graphics card

  Hello

  I lost my sound system after updating my video card, a Sapphire HD 5450 1 GB DDR3.

  I already tried to get in my BIOS, but I need to enter a password and I don't know the password?

  Also, I upgraded my BIOS before moving my graphics card. The latest BIOS for an HP dc7700 SmallFormFactor.

  Please help me, I can't play without audio... There is no fun to play games without sound...

  Hello:

  It is a problem common when you add a video card to your trusty old dc series business offices that were not intended to this new technology as HDMI.

  Not only don't the PC think you added a video card, but he also thinks that you have added a sound card since there is a HDMI audio chip on your video card Platinum.

  If the PC BIOS disabled onboard video and integrated audio system.

  This is why you have no sound.

  So, now you know why it's happened, let's go in and solve the problem in a jiffy.

  Restart your PC and press the F10 key to the HP welcome screen to enter the BIOS.

  Go to the Advanced menu and find the onboard audio setting (appeared as if by magic, now that you've added the video card).

  It will be set to Disabled. Change the setting to "Enabled". Save the setting it by hitting the F10 key and resave the settings when you exit.

  Reset and you will have your on-board audio back.

  To clear the BIOS password, shut down the PC, unplug and remove the Green password on the motherboard jumper.

  Restart the PC without the flying connection and the P/W should be cleared.

  Then shut down the computer, unplug it and replace the Green jumper on the pins that you deleted since and he put it back together.

• Error one of the UBS damage connected to this computer has malfunctioned and windows does not recognize it

  Original title: Canon MF 4500 printer inkjet

  My computer tells me that 'one of UBS damage connected to this computer has malfunctioned and windows does not recognize"it could the cable, as the printer (canon MF 4500) does not work.

  Hello

  1. what operating system is installed on your computer?

  2. when exactly you receive this error?

  3. all USB devices work properly on your computer?

  4. have you made changes on the computer before this problem?

  Method 1:

  You can try running the fix - it from the following link.

  Hardware devices do not work or are not detected in Windows

  http://support.Microsoft.com/mats/hardware_device_problems/

  Method 2:

  You can try to uninstall and reinstall the USB controller. Follow the steps.

  (a) click Start and then click Control Panel.

  (b) click System and Maintenance, click System, and then click Device Manager.

  Note: If Control Panel is in Classic view, double-click System and then click on Device Manager.

  If you are prompted for an administrator password or a confirmation, type the password, or click on allow.

  (c) in Device Manager, double-click to expand the "USB Bus controllers", right click on the controller host, click "Uninstall" and click "OK".

  Check that if at all, there is an exclamation point on the pilot, it suggests problems with the installed driver.

  (d) repeat step 2 to uninstall all items under 'USB Bus controllers'.

  Then, restart your computer and Windows will automatically reinstall all USB controllers.

  It will be useful.