This device can perform faster ".

Similar Questions

• Message: This device can perform faster if you connect high speed USB

  Hello

  I have a laptop Toshiba Satellite 2009 of Vista.
  I just bought a multimedia design Memup Feel of the disc hard 500 GB.

  My concern is that when I connect to my PC, I have the following message:
  + This device can perform faster. USB devices can be faster if you connect to a USB 2.0 high speed +.
  + To get the list of available ports, click here. +

  Then I have a list of ports in bold, but I don't know what to do with.

  How to solve my problem?

  Thank you

  Hello

  Are you sure that your laptop is Satellite 2009?
  I put t know this model of laptop.

  But I know that this error message; This message appears if you connect a USB 2.0 device to a slower USB port; That is, USB 1.1
  But I think that your laptop supports USB 2.0 ports either TI problem disc external HARD s or the issue of USB drivers
  Try updating the chipset driver you can also delete all the USB controllers and hubs in Device Manager ports. Restart the unit. After restarting again the OS would recognize all USB ports.
  Then try to reconnect the USB HDD

• T40 USB question "this device can perform faster.

  Hello

  OS: Windows XP sp3.

  The USB is just using USB 1.1 speed and informs "this device can perform faster..." ». I googled for this issue in an hour now without solution. The driver on your page for NT4 system. Where can I find a driver to get the proper speed? Or FAQ post, just something.

  Thanks in advance

  BR

  Christoffer

  In your research, have you been able to find this link? : http://www-307.ibm.com/pc/support/site.wss/document.do?lndocid=MIGR-50838

  Even if the document refers to Windows 2000, this means that you need the latest drivers of Intel chipset for the 845 and 855 chipsets to get USB 2.0 support working.

  The latest Lenovo drivers are available from the matrix of Thinkpad here (which are always old enough):

  http://www-307.IBM.com/PC/support/site.WSS/document.do?lndocid=MIGR-46058

  I had to do something similar (many moons ago) I had on my old T40, but the version of Windows XP is come with the correct drivers, I just need to use Device Manager to update the drivers from the default values of windows to the USB 2.0 version.

  Hope that helps.

  EDIT:

  You can also find information about the troubleshooting of devices USB 2.0 here:

  http://www-307.IBM.com/PC/support/site.WSS/MIGR-4YQHUD.html

  The most useful excerpt of this link is probably:

  Ensure that the USB device is USB 1.1 or 2.0 compatible.
  Connect compatible devices USB 1.1 on a compatible port USB 2.0 will cause an error dialog box to appear. This dialog box details that a device non-haute speed was attached to a port high speed. The device must operate normally, but at a slower speed than if a 2.0 device is connected to the 2.0 port. Most of the USB 1.1 devices will operate normally in the USB 2.0 ports.

  In case, the problem is with your driver (s) machine (s) rather than the hub/port USB driver.

• Receive the error message"this device can perform faster if you connect it to a 2.0 port" in the taskbar

  In the taskbar, this always happens "this USB device can perform faster if you connect it to a 2.0 port" and is a list of the USB Composite device. How can I prevent this arise?

  Hello

  1. Once you get this error message?

  2. it happens with all USB devices or is this a problem with a specific USB device?

  3. has the USB works well before camera?

  Method 1 : perform the following steps to stop this message from popping and check whether the problem is resolved or not.

  has. in the search box Type Device Manager start and click on enter.

  b. find now the option called Universal serial bus.

  c. now right-click on it and select search the hardware changes.

  Method 2 : run the troubleshooter of material and check if the problem is solved or not.

  Open the hardware and devices Troubleshooter

  Hope that helps.

• T110-107 "this device can run faster.

  Hi, when I move the lid I get the message "this device can perform faster" referring to USB 2.0. USB transfer rate is very slow after this message. Any ideas? Thank you

  Hello

  > "This device can perform faster" referring to USB 2.0. USB transfer rate is very slow after this message. Any ideas?

  You must update the chipset drivers and this error will disappear :)

• USB device can run faster

  Hi all

  I recently bought a USB-6008.  When I plug it into my PC, I get a message "this device can perform faster.  This USB device can perform faster if you connect it to a Hi-Speed USB 2.0 port.  For a list of available ports, click here. "When I click on the message, it shows me a list of available ports, but none of them seem not to be USB 2.0.

  All my USB ports are supposed to be USB 2.0.  It is an Asus P5N72 - T Premium mobo.  I have updated the bios, and made sure that USB 2.0 is selected in the bios Setup.  I use Win XP SP3.  According to the Microsoft Web site, there was a known problem with XP supporting USB 2.0 on Asus Motherboards, but that he was supposed to have been fixed in SP1.

  I realize that it is a matter of Windows probably more than a question of data acquisition, but I spent the entire afternoon on Microsoft, Asus and other sites.  Can anyone help?

  Thank you

  Ed

  
  

• Satellite Pro A60 PL: message: USB device can run faster

  Hello!

  I have a problem with the USB 2.0 drivers in my Satellite Pro A60 PL. everytime when I connect the message apear theres USB 2.0 device this device can run faster. What can I do about it?

  Hi guys

  I received the same message. It s not an error but a balloon tip Windows.
  I didn't find the reason for this message because my phone supports USB 2.0 ports too and I also connected a USB 2.0 compatible device.

  I've tired to remove the Device Manager, the controllers and the USB hubs and updated the Win XP operating system to the last State. I've also updated the driver chipset but sometimes (not always) this message again using a disc HARD 2.5 USB.

  I read in some professional computer magazines that this message is normal and it might appears with some SATA external USB hard drives. So you can ignore it.
  It s nothing serious.

  Greetings

• IBM Thinkpad message: 'this machine can run faster with the USB 2.0 hub.

  Original title: Thinkpad USB 2.0 Hub.

  Hello:

  I have an IBM Thinkpad T-21 which is under Ubuntu & Windows xp.  I primarily use Windows XP.  The pop-up that keeps occurring is "this machine can run faster with the USB 2.0 hub.  Can you tell me how to upgrade my USB 2.0 Hub?  Would like to know because I can't sync my Android phone with my computer until I do it. Thank you.

  Are you sure you copied this error message properly?  In other words, he says that the hub could perform better if connected to a USB 2.0 port?  As far as I can determine that the T21 is not come with a USB 2.0 port, even if you connect a USB 2.0 device (for example a hub), the unit will only race as fast as the port allows it.

  What is the brand and model of your terminal?

  It is possible that the message means the opposite (i.e., your computer has a USB 2.0 port, but the hub is only a USB 1.1 device).

  USB 2.0 was introduced in 2001, so if you bought your computer before 2001, it is likely that you use USB 1.1 or 1.0.

  Open the Device Manager (start > run > devmgmt.msc > OK)
  Expand the category of 'USB Bus controllers'.
  If you see the "Enhanced" work for one or more of the listed devices, you have a USB 2.0 port.  If you do not see "Enhanced", you have USB 1.1.

  

  If the problem is that the USB port on the computer is not 2.0, so your only solution is to buy a USB 2.0 PC Card adapter.  Example and example 2
  If the problem is that the hub is not 2.0, then you will need to buy a new hub.

• USB 3.0"your device can run faster.

  I recently bought a HP ENVY 15 t-j100 Quad CTO Notebook Windows 7 Professional Edition (PC product #: E1P05AV). Four ports are supposed to be usb 3.0, but sometimes when I put my flashdrive 3.0 in, it says "your device can run faster. I've updated all the drivers and the problem seemed to go away. But recently I have found that if I do not have the flash 3.0 player in the port completely, or if I do it slowly, he sometimes with the same message. Might not have in a sense caused the problem in the first place? It is even supposed to have this message when this happens? Any help would be appreciated.

  Hello cck979,

  I see that you have a problem with 3.0 ports on your laptop and your flash 3.0 player. I will try to help you with this.

  This document may have information and steps that will help you: Troubleshooting connections USB (Windows 7). Generally however if the unit is not plugged in all the way or it won't work not otherwise you will get some sort of message.

  Also have you noticed if this happens with all ports, or a specific port?

  See if the document offers further assistance.
  Thanks for posting on the HP Forums.

• How can I get the drivers for xp usb / get the device can run faster in the listed ports

  POP UP WITH SAYING HIS DEVICE CAN RUN FASTER IN THE PORTS LISTED, I HAVE THE WIRELESS CARD WIRELESS, MOUSE AND SPRINT U600, CONNECTED TO THE LAPTOP, THE PROBLEM JUST STARTED

  See the discussion of the difference between USB 1.1 and USB 2.0 and why this error message http://ask-leo.com/what_does_the_usb_device_can_perform_faster_mean.html
  If you have an old computer, you do not all USB 2.0 ports or some of your USB ports may be 1.1 e.a. 2.0

  Open the Device Manager (start > run > devmgmt.msc > OK) and expand the "Controllers of Bus USB" section by clicking on the + sign to the left.

  Are there warning icons? If so, provide details

  It will probably take several entries for "PCI to USB Host Controller" or similar terms.  Please report if one (or several) of these entries are for a "PCI to USB Enhanced Host Controller.  If none of the USB controllers is "strengthened", you do not have USB 2.0

• Devices on all my iCloud preferences says "this device can be used to receive codes of audit ID Apple." How can I change this if at least one, if not several, can receive the verification code?

  Devices on all my iCloud preferences says "this device can be used to receive codes of audit ID Apple." How can I change this if at least one, if not several, can receive the verification code?

  Try to go here and see if you can add them to your Apple ID.

• USB port can perform faster pop-up

  I keep getting an annoying pop up that 'USB port can run faster. This must be an internal port that I get this when no external USB has anything plugged.

  Go to the website of the manufacturer of your computer/laptop > drivers and downloads Section > key in your model number > look for the latest Vista drivers > download/install them.

  See you soon.

  Mick Murphy - Microsoft partner

• Message says that this device may function more quickly.

  I just bought a usb hub 4 ports to run my printer, USB key and a receiver 2.4 ghz for my keyboard and mouse, since then I get this message this device can run faster , I opened, but I do not understand what its actually means!
  I am happy with the speed because it is at the moment so can I get rid of this pop like me crazy! in this case every 5 minutes or more, also atuoplay
  window for my cd/dvd drive also opens in the background at the same time. I'm relatively new to this game, so if you could help I would be much obliged
  If you could explain the answer Mr. thow I was a 10 yr old it would help :)

  MIK niwdog

  MIK niwdog,
  Thank you for visiting the Microsoft Answers community forum.

  What a message means that you have plugged a USB 2.0 on a USB 1.1 device.  Try connecting the device to a different USB port on your computer.  If the error keeps popping up, here's how to disable:

  Open Device Manager by clicking the Start button, click on the Control Panel, clicking system and Maintenance, and then clicking Device Manager.  If you are prompted for an administrator password or a confirmation, type the password or provide confirmation.
  Expand the section indicating Bus USB controllers.
  Right-click on anything that has the word "controller" at the end, as a Standard Enhanced PCI controller USB host (or something similar), click Properties, click Advanced, and check in the box that says "don't tell me about USB errors".

  AutoPlay is popping up because he sees your USB and want to autoplay anything on it.

  How can I stop asking me what program I want to use?

  Disable AutoPlay for only one type of media
  1. open AutoPlay by clicking the Start button, clicking Control Panel, on material and audio and then click AutoPlay.
   
  2. in the list next to each type of media that you do not want to be asked questions on, select take no action and then click Save.

  Let us know if you need more information.
  Thank you

  Gloria
  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My laptop rpet device usb can perform better when there is nothing connected and it does again and again

  can someone help me I have a laptop running xp win at the time where he continues to start and starts the programs he started to appear the box that indicates the usb device can perform better. The problem is no usb devices are connected and it appears again and again. I uninstalled all the USB in the device manager then reboot, it finds all the usb and begins to do it again. I think it might be an update but do not know about you.

  Ok. try to uninstall the current usb drivers and reinstall.
  Use the good day updated USB 2.0 driver.

  reference http://msdn.microsoft.com/en-us/windows/hardware/gg487327.aspx

  pls make sure there is no virus infected on your system.

  Thank you!!

• Envy 5660: HP Envy 5660 Install/HP Utility/This device not supported

  I am trying to install a printer Envy 5660 on my MacBook Pro and I get to the part that says that the HP installation wizard appears automatically after the closure of the facility. I have the GET an error message saying "the device is not supported. Update of the HP utility or use other software HP which aims to support this device can solve the problem. "Where should I go from here?

  Hi @sul824,

  I see you are having problems installing the printer on Yosemite. I want to help you.

  Yosemite drivers are installed by the Apple updates, drivers online are available only up to 10.9.

  Connect the printer to the Mac through a USB connection and run updates Apple.

  Run the printer Wireless Setup Assistant, and then add the new network printer in the printers and Scanners.

  If you appreciate my efforts, please click on the "Thumbs up" button below.
  If there is anything else I can help you, let me know. Thank you.