This device does not work properly because Windows... this device. (Code 31)

Hello buddies, how to solve this problem (code 31)

USB does not work on my PC, I found that it was the problem of the unit. and he wrote that this device does not work properly because Windows cannot load the drivers required for this device. (Code 31).

How can I solve this problem?

In addition, you can check the following registry key? :

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\ (36FC9E60-C465-11CF-8056-444553540000)

Is there a 'name' UpperFilters and LowerFiltersin the registry for this key, in the right window?

If so, what is 'Data' for these names?

Tags: Windows

Similar Questions

  • I get an error code, ""this device does not work properly because Windows cannot load the drivers required for this device. " (Code 31) "on the computer.

    My drive hard seagate is not recognized on my laptop, I can see it in the legacy of the laptop but has an exclamation deside it, there a message when I tried to solve the problems, error was not fixed, the device status is "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) »

    Is anyone know how can I access my hard drive again?

    Thank you

    Hello

    You has made changes to the system before the error appearing?  Cancel the changes.

    (1) in Device Manager > right click on the driver, and then select uninstall

    Reboot and Windows will reload the driver

    (2) remove the upper & lower filters that cause errors in Code 31

    http://pcsupport.about.com/od/driverssupport/HT/UpperFilters-LowerFilters.htm

    Access the manufacturer's Web site and search for updated driver

  • This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

    Original title: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel

    This device does not work properly because Windows cannot load the drivers required for this device. (Code 31) in the graphics AMD - 8151 HyperTransport (MC) AGP3.0 Tunnel, what do I do to fix this help please.

    Jake

    Hey Jake,

    Follow these methods.

    Method 1: Follow these steps:

    (a) restart your computer if you have not already done so. There is always the possibility that the error Code 31 that you see was caused by a temporary problem with Device Manager. If so, a simple reboot can solve the Code 31.

    (b) have you install a device or a change in the Device Manager, just as the Code 31 error appeared? If so, it is very possible that the modification caused the Code 31 error.

    (c) cancel the change if you can restart the computer and then check again the error Code 31. Depending on the changes, some solutions may include:

    Remove or reconfigure newly installed unit.

    Restore a version prior to updating the driver.

    Use system restore to undo the Device Manager recent related changes.

    http://Windows.Microsoft.com/en-us/Windows-Vista/system-restore-frequently-asked-questions

    (d) to remove the registry values filters upper and lower. A common cause of errors in Code 31 is the corruption of two registry values in the class of the CD-ROM/DVD-ROM drive registry key.

    Note: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click the following link. http://Windows.Microsoft.com/en-us/Windows-Vista/back-up-the-registry

    Method 2: Update the latest graphic drivers.

    Updated a hardware driver that is not working properly

    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

  • Computer does not recognize network. -This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

    Hello!

    I have problems connecting to my network. I stay in a House (not my own) and I can't connect to the network in this House. When I choose the option 'connect to a network', nothing happens. I followed the instructions to display the "Device Manager" and watch the 'map', and he said:

    "This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

    Click on 'Search for solutions' to send data about this device to Microsoft and to see if there is a solution available. »

    When I click on this button, nothing happens... Should I simply wait for Microsoft to return to me - or is there something else I need to do?

    Thank you!

    Hello

    You must get the drivers latset for m computer support site.

    Delete the "false: entry in Device Manager and install the new drivers."

    Jack-MVP Windows Networking. WWW.EZLAN.NET

  • Error: This device does not work properly because Windows cannot load the...

    I get this error message "this device does not work properly because Windows cannot load the drivers required for this device. (Code 31) "via a wired connection. And that's the Microsoft 6to4 adapt #7 and the same card but the #4 one.  Are these drivers or another file that I could use DL?

    Hi JasonBedgood,

    1. Once you get the error message?
    2. did you of recent changes on the computer?

    This error occurs if the required driver is not installed or the driver is damaged.

    I suggest that you update the driver for the device and check.

    How can I update the driver for network card on the computer

    1. click on Start, click Control Panel, and then double-click System.
    2. click the tab hardware , and then click Device Manager.
    NOTE: If you are prompted for an administrator password or for confirmation, type the password, or click continue.
    3. click on network adapters to expand.
    4. under network adapters, double-click the entry for Microsoft 6to4and then click driver .
    5. click on Update driver software.
    6. follow the Wizard update software driver to update the driver for NICs .

    Updated a hardware driver that is not working properly
    http://Windows.Microsoft.com/en-us/Windows-Vista/update-a-driver-for-hardware-that-isn ' t-work correctly

    If the device driver update did not help then check the link below for one of the thread with the question and try the steps mentioned by Lionel Chen on January 9, 2008
    http://social.technet.Microsoft.com/forums/en-us/itprovistahardware/thread/3a503cdb-e61c-44BC-97c4-0b38b0e5f929/

    I hope this helps!

    Halima S - Microsoft technical support.
    Visit our Microsoft answers feedback Forum and let us know what you think.

  • Huawei Mobile Connect 3 G Modem this device does not work properly because Windows cannot load the drivers required for this device. (Code 31).

    System: Windows 7 Ultimate 64-bit. QC processor 2.5 Ghz, 4 GB RAM, Nvidia 9600GT. The work of modem very well until about a month. Uninstalles the device, I reinstalled it but the same messages. I've updated the driver and software, still nothing. In safe mode, the modem driver is loaded and the devicemanager reports that the device is functioning properly. Once the system is booted in normal mode divcemanager reports: this device does not work properly because Windows cannot load the drivers required for this device. (Code 31). Help, please. I check the settings for the 6to4 drivers and there is no problem.

    Thanx

    Hi rui2010,
     
    Place your machine in a clean boot State to see if another application is in conflict with the modem.
    If this fails, I recommend you reach out to the community Hauwei for assistance:

     
    Aziz Nadeem - Microsoft Support

    [If this post was helpful, please click the button "Vote as helpful" (green triangle). If it can help solve your problem, click on the button 'Propose as answer' or 'mark as answer '. [By proposing / marking a post as answer or useful you help others find the answer more quickly.]

  • Microsoft ISOTAP #14 adapter this device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

    can someone help me please, I need to fix this as its making the computer

    Hello

    Control Panel - devices - right click on - UNINSTALL - REBOOT Manager

    Nothing else to do, Windows will do the rest. And you can ignore the error if you wish and on some
    computers, it will always be there but no problem to be expected.

    On a Windows Vista-based computer or on a computer, Windows Server 2008, the card Microsoft ISATAP
    appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
    http://support.Microsoft.com/kb/932520

    Hardware devices not detected or does not
    http://support.Microsoft.com/GP/hardware_device_problems

    I hope this helps.

    Rob - bicycle - Mark Twain said it is good.

  • This device does not work properly because Windows cannot load the drivers required for this device. (Code 31) my video card does not work why?

    can u help me quickly?

    Hello

    -For how long have you had the problem?
    -Did you change your computer, after which the question began?

    I suggest that you uninstall and reinstall the drivers for video card and check if that helps.

    Uninstall or reinstall a device

    Note: Not applicable for Windows Vista also.

  • Error of USB host - peripheral controller is not working properly because Windows cannot load the drivers required for this device. (Code 31)

    Original title - USB - IF xHCI USB Host Controller

    This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

    I have a permanent error on my computer and when I run the troubleshooter I get the above message.  It says Windows cannot load the driver.

    Hello

    USB devices remove all you can - restart the computer - is still there, the error? If it isn't
    It is related to one of the add-in devices that you removed. If she is still there, then, the question is
    either a device internal who can not remove or physically with the USB bus itself.
    If it was not there, add devices at a time until it is displayed - keep in mind that it is
    possible that there are two (or more) devices in conflict over the issue. Once you
    identified the check of the aircraft with the help of the manufacturer.

    1. to find the control panel - device - device - right-click on it - uninstall - Manager then
    Restart the computer to see if it clears.

    2. same place - double click on the device - driver tab - driver update - to see if that helps.

    3. check with the support of system manufacturer (manufacturer of motherboard for customized systems), their
    online documentation and drivers, diagnostics and ask questions in their forums on all known
    questions. Update the Bios and chipset or other USB drivers.

    =====================================

    If necessary, we will use these additional troubleshooting methods:

    How to fix Code 31 errors
    http://pcsupport.about.com/od/findbyerrormessage/a/code-31-error.htm

    I hope this helps.

    Rob Brown - Microsoft MVP<- profile="" -="" windows="" expert="" -="" consumer="" :="" bicycle=""><- mark="" twain="" said="" it="">

  • My crashing after windows loading and I have this message - this device is not working properly because Windows cannot load the drivers required for this device. (Code 31)

    This device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

    Hello

    Have you tried to update the drivers as suggested by Basith M?

    Method 1:
    You can run the fix provided in the link and check out them.
    Hardware devices do not work or are not detected in Windows
    http://support.Microsoft.com/GP/hardware_device_problems


    Method 2:
    You can also try the procedure described in the link to troubleshoot driver issues.
    Tips for solving common driver problems
    http://Windows.Microsoft.com/en-us/Windows-Vista/tips-for-fixing-common-driver-problems

    See also the proposal contained in the link and check.
    On a Windows Vista-based computer or on a Windows Server 2008-based computer, the Microsoft ISATAP map appears with a yellow exclamation mark next to it in Device Manager, and you also receive an error message
    http://support.Microsoft.com/kb/932520/en-us
  • Get the error code 31 this device is not working properly because Windows cannot load the drivers required for this device.

    Original title: WAN miniport driver

    A yellow sign appears on MINIPORT Wan (IP), MINIPORT (IPV6) AND WAN WAN MINIPORT (NETWORK MONITOR) for this reason I have not access to internet to throw bluetooth tethering that even he does not connect. In the properties of the driver, it indicates:-this device does not work properly because Windows cannot load the drivers required for this device. (Code 31)

    I use windows 8 in my sony vaio
    MODEL - SVE15123CNW

    Hi Praveen,

    Perform the steps suggested by Nirmal S from the link below and see if it helps.

    http://answers.Microsoft.com/en-us/Windows/Forum/windows_8-hardware/i-get-an-error-code-31-in-Device-Manager/3364d05a-af20-4f6d-8597-b4b9f6a74b60

    Answer please if you have any questions.

  • Button hardware on Samsung slate Windows 7 does not work properly in Windows 8

    After you install the official update of Windows 8, the hardware button windows does not work properly. button lock display as well.

    Whenever I restart the system, everything works fine, until you put the sreen of. If you re-enable the slate (just energy), the buttons Don t work.
    Thus, windows hardware button offers just a double click to change the windows, but doesn´t take you of the subway home and the screen lock work doesn´t button at all.
    Someone at - it a solution for this problem? Would be nice, because I think that all the samsung slate 7 users have this problem.

    Hello. I don't know if you have this problem, but as long as no one have answered your question.

    I had exactly the same problem and after following the advice of the official windows samsung 8 upgrade support the Tablet worked perfectly.
    Just follow this link (http://www.samsung.com/us/support/win8upgrade/) and download the software to the 3rd market. It will install a lot of software and hardware upgrade for your Tablet and if it doesn't work as well for me it will solve all your problems.
  • FSX does not work properly in Windows 8

    does not work in W8. Have you tried the troubleshooting, but ultimately it's just saying incompatible.

    Tried compatibility (64-bit) of windows settings 7.

    Tried running as administrator.

    If she takes over his take about 5 minutes before it stops loading.

    ~ See you soon

    MICROSOFT FSX WILL NOT WORK ON WINDOWS 8? IT STARTS AND MINUTES AFTER TAKE-OFF, HE WILL SAY "MICROSOFT FLIGHT SIMULATOR DOES NOT" AND HE SE FARM?

  • Google Desktop Gadgets does not work properly on windows 7 Home premium

    my desktop like clock, CPU meter etc. gadgets are not well presentable. They comes to the screen in an incomplete form

    Hi Sudhakarsingh,

    You did changes to the computer before the show?

    I suggest you try the steps from the following link:

    Gadgets Windows 7 can not work or be displayed properly
    http://support.Microsoft.com/kb/2515657

    Hope this information is helpful and let us know if you need more assistance. We will be happy to help.
  • Netflix app does not work properly in Windows 8.1 metro/modern App

    Separated from this thread.

    Original title: Netflix Error Code: W8156-80040153

    Hi Nick,

    Thanks for posting your question on the Microsoft Community. You seem to have a problem with a Netflix app running on your computer, we will help you in the matter of fixing. Please answer the following questions to help me understand the issue better:

    1. These are methods of troubleshooting that you tried to solve the problem?

    2. Have you tried to uninstall, reinstall the Netflix app?

    As a work around, you can uninstall, reinstall the Netflix app. That might solve the problem.

    This 'miracle' does not solve the problem for me, I'm having the same problem. Netflix work well in Google Chrome on the desktop but not in the application of Metro/modern Windows 8.1.

    Separated from this thread.

    Hi Nick,

    Thanks for posting your question on the Microsoft Community. You seem to have a problem with a Netflix app running on your computer, we will help you in the matter of fixing. Please answer the following questions to help me understand the issue better:

    1. These are methods of troubleshooting that you tried to solve the problem?

    2. Have you tried to uninstall, reinstall the Netflix app?

    As a work around, you can uninstall, reinstall the Netflix app. That might solve the problem.

    This 'miracle' does not solve the problem for me, I'm having the same problem. Netflix work well in Google Chrome on the desktop but not in the application of Metro/modern Windows 8.1.

    Did you create another user with admin rights profile to see if it works? The current user profile may be corrupted.

    Error reading of Netflix W8156-80040153.

    https://help.Netflix.com/en/node/11637

Maybe you are looking for