This drive cannot start Windows. ensure that the drive controller is enabled in the bios
so I built a new rig
AMD fx 6300
ASUS m5a78musb3
WD caviar green 1 TB hard drive
during the installation of windows 8 m getting this error "Windows is unable to start in this hard drive. activate the disk controller in the bios bla bla...
I googled a lot... believe me! changed sata controller ><->ide, ahci vice versa tried sata ports... disabled the uefi boot... allow a smart tracking.
I tried with a different hard drive (WD caviar blue 500 GB) in the present, the rigging and it worked without hassle. Looks like the hard drive is damaged? any suggestions?
I tried to format the drive with diskpart, but I keep getting i/o errors related to... I also tried with ubuntu its not appearing is not in the installation?
In short, I can't start/format/partition this hard drive.
Hi Rupesh,
I'm sorry to inform drivers that is faulty, because you have built this computer, you can contact the store of the retailer where you bought the HARD drive or contact the drive manufacturer's Web site.
->
Tags: Windows
Similar Questions
-
This problem is on my laptop and I can not further only the screen with the above opinion. I don't have the original disc, since I received the laptop of my mother when she could no longer remember how to use it. I need a repair of xp, or all that it can be called and information how to fix this problem is driving nuts me to have a laptop that is faulty... Please help me.
This problem happens almost daily.
You can search the forums for discussions with similar problems (or the same problem) and peruse the threads where the result is a happy ending and examine everything first using these methods. This will reduce the time to resolution and frustration.
Something like this example:
The question was preceded by a loss of power, aborted reboot or abnormal termination? (this includes pulling and buttons power)
These can cause corruption in the file system that must be fixed before you do anything else.
If none of these events occurred (or even if they have not taken place), you must verify the integrity of your file system before anything else (especially "try" things).
Use the XP Recovery Console to check the file system on your HARD drive and fix the problems and then try to start your system - this may be all you need to do. Or, you are welcome to just start trying things that might work.
Boot into the Recovery Console Windows using an XP bootable installation CD.
If you have no XP bootable media (or aren't sure you have) create a bootable XP Recovery CD of Console and do not forget.
This is not the same as recovery disks that may have come to a store to purchase the system.
You can make a bootable Recovery Console CD by downloading an ISO file and burn it to a CD.
The ISO bootable image file you need to download is called:
xp_rec_con. ISO
Download the ISO from here:
http://www.mediafire.com/?ueyyzfymmig
Use a new CD and this simple and free program to burn your ISO file and create your bootable CD:
Here are some instructions for ImgBurn:
http://Forum.ImgBurn.com/index.php?showtopic=61
It would be a good idea to test your bootable CD on a computer running.
You may need to adjust the computer BIOS settings to use the CD-ROM drive as the first device to boot instead of the hard drive. These adjustments are made before Windows tries to load. If you miss it, you will need to restart the system again.
When you start on the CD, follow the instructions:
Press any key to boot from CD...
Installing Windows... going to pronounce.
Press 'R' to enter the Recovery Console.
Select the installation that you want to access (usually 1: C:\WINDOWS)
You may be asked to enter the password (usually empty).
You should be in the folder C:\WINDOWS. It's the same as the
C:\Windows folder that you see in Solution Explorer.
The Recovery Console allows base as file commands: copy, rename, replace, delete, chkdsk, fixboot, fixmbr, cd, etc.
For a list of the commands in the Recovery Console, type help at the command prompt.
Start by checking the integrity of your file system by using the chkdsk command.
In the command prompt window, run the chkdsk command on the drive where Windows is installed to try to fix any problems on the afflicted player.
Running chkdsk is fine, even if he finds no problem. It won't hurt anything to run it.
Assuming your boot drive is C, run the following command:
CHKDSK C: /r
Let chkdsk finish to correct the problems, he could find. It may take a long time for chkdsk complete or they seem to be "stuck". Be patient. If the HARD drive led blinks always, chkdsk is something. Keep an eye on the amount of the percentage to be sure that it is still making progress. It may even seem to go back sometime.
You must run chkdsk/r again until it finds no error to correct.
Remove the CD, and then type "exit" to exit the RC and restart the computer.
You have not to set the BIOS to boot the disk HARD since the CD won't be.
Do not guess what the problem might be - understand and resolve it. I need YOUR voice and the points for helpful answers and propose responses. I'm saving for a pony!
-
I need to install Microsoft silverlight to watch films from netflix, but it is impossible to install it; but in my programs, I have microsoft silverlight (old), I think that if I remove the old program, the new microsoft silverlight will be possible to insall it. The problem is when I try to remove the old silverlight (add or remove programs) do not remove and displays this dialog box "the installation source for this product is not available. Verify that the source exists and that you can access. I like you would help me in this matter. Thank you very much. Manuel Ortega.
Hello
I recommend you to ask your question in the Microsoft's Silverlight Installation and Setup forum for better support.
-
When you try to run a system recovery I get this error; OxcOOOOOOf
Original title: error OxcOOOOOOfMy laptop crashed. I used my initial recovery to start. I get a message from Windows Boot Manager as follows:
Windows could not start. A recent hardware or software change might be the cause. To solve the problem:
1. Insert Windows installation disc and restart your computer.
2. choose your language settings, and then click "next".
3. click on "Repair your computer."If you do not have this disc, contact you system administrator or computer manufacturer for assistance.
File: \Windows\system32\winload.exe
Status: OxcOOOOOOf
Info: Seelected entry could not be loaded because the application is missing or damaged.
It does not work. Suggestions and no, I have not modified before the crash.
I loaded my recovery disk for my 32-bit home edition of vista Hp pavilion dv6700 cto entertainment lapt top and after going through the recovery process I just get this mechioned of the screen in the original question. How ever during my recovery process never got far enough to enter my product code, he asked just a two disc and disc supplamentry and then gave me a blue screen black for a minute or two then rebooted and showed the failure of start OxcOOOOOOf screen... what should I do?
Hi Anthony206,
Since you've already tried to use the Windows Vista recovery disc has received from the Original Equipment Manufacturer (OEM).
From now on, you can only contact OEM for the use of the recovery feature.
I hope this helps.
-
Cannot start Windows 7 after the update of the system
I don't speak of Windows 7 RTM, I know is RC forum but I downloaded the RC of microsoft's official website and I can't install it, it reached the "end of installation"(ou quelque chose comme ça) phase and blue screen of death appears, saying "memory dump" and other things. ". That's why I downloaded RTM from a torrent site, I installed it, everything was fine, the aero was not on so I that I should update the video drivers and then I downloaded all the updates possible (via the control panel), then I restarted the pc and now I am not able to load windows , it's blue screen of death! Notice that I can run windows 7 mode safe mode, but when I try to start it in normal mode the blue screen appears. BTW, I have windows xp installed on my pc as well. So, here is my setup:
AMD 7750 dual-core 2, 7GHz
4 GB of RAM, 800 Mhz, but the system says 3.25 alone can be used
ATI 4730 512 MB, btw I have integrated graphics card (ati hd3200, I think), don't know if it's important but...Here is the information about the error:
Signature of the problem:
Problem event name: BlueScreen
The system version: 6.1.7600.2.0.0.256.1
Locale ID: 1026More information about the problem:
BCCode: 116
BCP1: 871F13D8
BCP2: 90C204B4
BCP3: 00000000
BCP4: 00000002
OS version: 6_1_7600
Service Pack: 0_0
Product: 256_1Files helping to describe the problem:
F:\Windows\Minidump\080809-15375-01.dmp
F:\Users\blah\AppData\Local\Temp\WER-22953-0.SysData.XMLRead our privacy statement online:
http://go.Microsoft.com/fwlink/?LinkId=104288&clcid=0x0409If the online privacy statement is not available, please read our offline privacy statement:
F:\Windows\system32\en-US\erofflps.txtHere's the crash dump:
Debug version of Microsoft Windows (R) 6.11.0001.404 X 86
Copyright (c) Microsoft Corporation. All rights reserved.Loading dump file [F:\Windows\Minidump\080809-14921-01.dmp]
The mini kernel dump file: only registers and the trace of the stack are availableSymbol search path is: * invalid *.
****************************************************************************
* Loading of the symbol may be unreliable without a symbol search path. *
* Use .symfix to get the debugger to choose a symbol path. *
* After adjusting your path to symbols, use .reload to refresh the locations of symbols. *
****************************************************************************
Executable search path is:
*********************************************************************
* Symbols cannot be loaded because the path is not initialized. *
* *
* The symbol path can be defined: *.
* using the _NT_SYMBOL_PATH environment variable. *
* with the help of thethere when you start the debugger argument. *.
* using the .sympath and .sympath + *.
*********************************************************************
Cannot load the image \SystemRoot\system32\ntkrnlpa.exe, 0n2 error Win32
WARNING: Unable to verify timestamp for ntkrnlpa.exe
ERROR: Module load completed but symbols can be loaded for ntkrnlpa.exe
Windows 7 Kernel Version 7600 MP (2 processors) free x 86 compatible
Product: WinNt, suite: TerminalServer SingleUserTS
By: 7600.16385.x86fre.win7_rtm.090713 - 1255
Computer name:
Core = 0 x 82803000 PsLoadedModuleList = 0x8294b810
The debugging session: 11:50:54.734 Saturday, August 8, 2009 (GMT + 3)
System Uptime: 0 days 0:00:19.343
*********************************************************************
* Symbols cannot be loaded because the path is not initialized. *
* *
* The symbol path can be defined: *.
* using the _NT_SYMBOL_PATH environment variable. *
* with the help of thethere when you start the debugger argument. *.
* using the .sympath and .sympath + *.
*********************************************************************
Cannot load the image \SystemRoot\system32\ntkrnlpa.exe, 0n2 error Win32
WARNING: Unable to verify timestamp for ntkrnlpa.exe
ERROR: Module load completed but symbols can be loaded for ntkrnlpa.exe
Loading the kernel symbols
...............................................................
................................................................
..........
Loading user symbols
Loading unloaded module list
.....Pirated Windows 7 allows malware, botnet zero-day ZDNet.com.url
Messages rating helps other usersMark L. Ferguson MS - MVP
-
Cannot start Windows 7 after the conversion of the physical machine
Hello
I converted my windows 7 64 bit running physical machine to the virtual machine using converter 5.0. I am running VMWare Workstation 8.0. My physical machine hid the 100 MB boot partition and 90 GB main partition. During the conversion, I don't have an option to select a hidden partition, nor did I want in my virtual machine. Conversion failed with the following message (planned):
Unable to find the system volume, reconfiguration is not possible.
Then, I started the virtual machine using the Windows DVD and selected the option "repair". Once I arrived, I used diskpart to make my active primary partition and then followed the steps in this KB http://kb.vmware.com/selfservice/microsites/search.do?language=en_US & cmd = displayKC & externalId = 1037507 to fix everything including BCD. Once this was done, I used converted to reconfigure the virtual computer, and this time he succeeded. Everything was good and as expected up to that point. Now, when I start the VM, I get by BIOS init and then I get a black screen - no messages at all and he vm it is here without doing anything. I tried to fix it again and everything seems good (checked all the information using diskpart, bootrec and bcdedit so that automated repair) - everything seems to be in order, but the black screen is all I see when I try to start.
Any help to guide me to this point is very popular figure.
Thank you
Andrey
Disk2vhd create a vhd file
Starwinds V2V converter converts the virtual hard disk into a vmdk
This vmdk is assigned to a new virtual machine
first boot the virtual machine goes into a Windows 7 drivers restore CD you patchmy notes:http://sanbarrow.com/p2v2008r2.html
-
All of a sudden my DVD drive has stopped working. Windows Vista SP2 doesn't see it, but I can see it in the BIOS.
Error: This device cannot start. (Code 10)
The driver has the exclamation point. I uninstalled the driver and restarted the PC, but the system does not re - install.
The exclamation point is up there.Help, please
Thank you
Hello
This article can help...
http://support.Microsoft.com/kb/314060
Tricky
-
Hello world
I know, there are several other threads on this topic, but I couldn't find a working solution. I currently have no OS on my DELL XPS 17 L702X. When I try to install from a USB stick bootable Windows 7 Home Premium x 64 I get this error message: windows cannot be installed on this physical drive of this computer may not support the start-up this drive make sure that the drive controller is enabled in the computer's bios menu.I've tried wiping HARD drive and reformat with GParted. I don't really know what I could do.I would be very grateful if you could help meHello
I suggest that you contact the manufacturer of the computer to change the BIOS settings and check if it is has updated the BIOS.
Important: BIOS change / semiconductor (CMOS) to complementary metal oxide settings can cause serious problems that may prevent your computer from starting properly. Microsoft cannot guarantee that problems resulting from the configuration of the BIOS/CMOS settings can be solved. Changes to settings are at your own risk.
Let us know the results. We will be happy to help you further.
-
in the Device Manager window.there is a (!) brand microsoft tun miniport adaptor.this device cannot start. (code 10) hmendezlopez
Hello
Control Panel - Device Manager - do right click on them - UNINSTALL - REBOOT
Nothing else to do, Windows will do the rest. And you can ignore the errors altogether if you wish
and on some computers, it will always be there but don't cause any trouble.On a Windows Vista-based computer or on a Windows Server 2008, Microsoft computer
ISATAP map appears with a yellow exclamation next to it in Device Manager and you also
error message
http://support.Microsoft.com/kb/932520I hope this helps.
Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.
-
Get a Code 10 error "this device cannot start' for my optical drive
Hello
I am running a Dell Studio 540 with the following specifications:
Processor: Intel Q6600 @ 2.4 GHz
RAM: 4 GB
HD: 750 GB 7200 RPM SATA
Graphics card: nVidia 9800GT 512MB
OS: Windows Vista Home Premium 32-bit
All the drivers and BIOS are up-to-date.
My current optical drive is an Optiarc DVD +-RW AD-7200 s ATA Device Unit which has now disappeared from "My Computer". By opening the Device Manager, it has a small yellow triangle with an exclamation mark inside. When I click on it that a new window will open and in the device status area, he said:
This device cannot start. (Code 10)
Currently, I have tried two methods without success. First, I downloaded the latest drivers/firmware for the optical drive directly from the Dell Web site, but to try to install, I get an error box saying that the "target drive is not properly".
I also ran the Mats_Run.devices of the Microsoft Automated Troubleshooting services who correctly identified the problem, but said he could not address them and directed me to these forums.
Any help would be greatly appreciated.
Thank you for your time,
Donald Lundie
Hello
The Code 10 error code is generated when the Device Manager has not enough information or error that spread upwards by device drivers is not recognized by Device Manager. In addition, this error may occur if one of the pilots who needs the unit does not start. If multiple drivers are used by a particular device, it can be difficult to determine which failed.
As you have already tried updating the drivers for the device, you can just go through the article that talks about the Code 10 error.
Description of errors related to the 10 Code that generates the Device Manager in Windows on computers
http://support.Microsoft.com/kb/943104/
You can run the fix in the below article data and check if this is useful.
Your CD or DVD drive is missing or is not recognized by Windows or other programs
http://support.Microsoft.com/kb/982116
Hope this information is useful.
Amrita M
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think. -
The Philips SPA5210 bar: this device cannot start. (Code 10)
Hi all
I have a brand new Philips Soundbar which does not work. Running Windows 7 Professional 64 bit and try to use the audio driver generic usb (which is what suggests Philips). I get the dreaded "this device cannot start. (Code 10) "error.
This unit works very well on my Linux box, so I know that its hardware functional. If anyone can help with this?
Thank you very much
Brian
Hi Brian Matheson,.
It is possible that the Soundbar is perhaps not compatible with Windows 7 64 bit operating system.
Check out the link here and open the user manual where it does not list Windows 7 in system requirements.
If it works, try the step below and check out them.
1. click on Control Panel.
2. double-click on the sounds and Audio devices icon.
3. in sounds and Audio devices
1 properties, select the Audio tab.
2. under sound playback, select Philips SPA5210.
If the previous step fails, then try to connect to it on the other USB port and check.
If you have Windows 7 32 bit on another PC, check if the Soundbar works.
I hope this helps!
Halima S - Microsoft technical support.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I got driver Conexant speakers on my laptop. I tried to find a device driver updates, but have had no luck. After being in Control Panel, hardware and audio, Device Manager, sound, video and game controllers, under that is high definition Audio Device with a yellow triangle and!.
After a right click and update driver, it says that the driver is up-to-date. In addition, the error code says this device cannot start (Code 10)
In addition, this seems to be a driver of Microsoft when the original driver was Toshiba/Conexant. I looked on the support Web site of Toshiba for a driver updated for my laptop and Windows 7.
Any suggestions?
Umesh P,.
Thank you for answering my question. I don't know that this forum allows you to stay busy. Thank you for taking the time to answer my question.
To sum up, I checked the Windows Audio and Windows Audio EndPoint Builder according to your instructions. Both were running as usual and start automatically, so it wasn't the issue.
I then visited Fix It. On the web page, since I am under Windows 7, the instructions on the provided web page to access the control panel and through system and security, to try to resolve the problem to fix common computer problems.
This process led me through the same re-setup of the device through Windows 7 driver that failed previously. Also because it has detected Windows 7, the web page would allow me to run the Fix It program.
When I visited the Support from Toshiba web page you provided, I was unable to find a sound driver for Windows 7. After filtering through my computer on their web page, the nearest driver was for Vista.
Take a chance, I downloaded it anyway. What has been the worst that could happen? It does not work? Well, I was there already. In any case, the installation worked and I now the audio again.
Moreover, this is the link for the driver, for anything that might be in a similar situation I've been:
driver_audio_conexant_25636A.exe
-or-
http://cdgenp01.CSD.Toshiba.com/content/support/downloads/driver_audio_conexant_25636A.exe
Also, Conexant offers no direct audio driver support and ask you to check with the manufacturer, which in my case is Toshiba. Toshiba not currently has an audio driver Windows 7 for my particular Satellite phone. Since this is an older, they can't come out with an updated driver.
But, since the audio driver Vista download works, it is now a non-issue.
Thank you!
Jay
-
We get an error "this device cannot start" Code 10 on Windows 7.
Original title: USB not recognized verified work storage device
I have a 8 GB USB Flash drive that has, until recently, worked perfectly on several OSes including Windows 7 and 8. Recently, the player does not seem to want to work on one of my installations of Windows 7 on a PC (HP EliteBook 8470p).
I tried to reinstall the drivers for it on my machine specific windows 7 that does not work on. Device Manager gives me "this device cannot start. (Code 10) "even after reinstalling the drivers and reboot several times. I use also some virtual machines in Windows 7 and 8 on the same PC, and when connecting virtually the USB key to the virtual machine to Windows 7, I can't detect it. When you connect the device to the virtual machine from Windows 8, I can access the files and even format, so the USB ports on my computer are all functional.
To summarize, the device works in Windows 7 and 8 separate facilities of this computer, but does not work on 7 on my TI, if the main or virtualized operating system. The VM of Windows 8 on this computer can recognize the device.
Thanks for the answer, except that I discovered the problem. I checked upward in the disk management window, and I saw that the reader, for some reason, was not assigned a letter. After you manually assign the drive letter, all data on the disc is now available. Thanks anyway.
-
This device cannot start. (Code 10) with a hard usb pen and readers for windows 7
Recently, I used acronis true image to migrate my hard drive to an ssd from 250 to 500, the problem is on the new drive I get "this device cannot start. (Code 10) "error every time I try to use a USB key or external hard drive on the new image, the old image is fine. I tried all the usual alternatives to surf the web;
Reset
Re-creating image several times.
uninstall all the usb drivers on Device Manager Associates,
update drivers,
using the microsoft error fix program (fails to answer to find bespoke online solutions).
Any help would be useful.
Kind regards.
Hello Scott,
Thanks for posting your query in Microsoft Community.
I understand that you have problems with USB devices in the computer.
I would like to know some more information on this issue to help you better.
(1) that Microsoft fix program error have tried?
(2) remember to make changes to the computer, before this problem?
In the meantime, you can try to follow the following suggestions to solve the problem.
Actually code 10 occurs mainly because of devices and hardware driver issues or because of compatibility problems between the drivers of equipment and additional software that is installed on the windows.
FIX: "this device cannot start" error Code 10 in the Device Manager in Windows
http://support.Microsoft.com/kb/943104/en-us
Important: This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:
Registry backup
http://Windows.Microsoft.com/en-GB/Windows/back-up-registry#1TC=Windows-7I hope this helps. Otherwise, feel free to write us again for more assistance, and we will be happy to help you.
Thank you
-
USB Mass Storage Device gives me the Code 10 error. This device cannot start
I have an external hard drive, Iomega Prestige 1 TB and one of the people at the school he fell from the top of the computer tower that resembled a fall of 30 cm, after it still worked, but then a few minutes later there not later he was still able to connect but it kept asking me to format it , so I wanted to try and find a way to get my data without formatting it. A day later I plugged the external hard drive, it started to beep for 5 min then it connected to the computer but unfortunately didn't show up in my computer, but he did it in the printer and peripheral. I checked my device manager and it showed a yellow explanation mark with the USB mass storage device. I went to properties and it says: "this device cannot start. (Code 10) "How can I solve this problem?
Hi AntonioDavism,
You can check if the following is useful.
Method 1: Run the hardware and devices Troubleshooter and check if that helps.
Method 2: Follow the steps in the below article mentioned and look for the question.
Maybe you are looking for
-
the movement of the cursor is required to download the file
It started with the automatic download of worm 33. I'm running a HP520 with processor i5 and windows 7.
-
Run Bit Defender on my Mac?
El Capitan, 10.11.4 running VS. I installed Bit Defender on my Mac. I assumed it was OK I found for Bit Defender in the iTunes Store. Should I not have installed?
-
Satellite P200 accidents + message: graphic card driver does not work properly
Hello hope that this issue has not been covered before, but I've owned a Satellite P200 for 3 years now, and this week, it crashes all the time. When it started going down he gave me a few messages in the sense of "your graphics card/driver does not
-
Realtek 8191se in Satellite Pro L640 won't see 5 GHz network
I have a new Apple Extreme Base Station with full support dual band 802.11n.I set up two separate 2.4 GHz and 5 GHz networks.The wireless adapter is a Realtek wireless LAN 802.11n PCI-E NIC 8191SE bundled with the laptop when I bought it.Toshiba L640
-
Bought Window Live Hotmail more, why I can not yet send emails?
I have many friends, as you can see in my contacts lists. I change my job and need to inform all the. Windows Live blocked send me e-mails, after I upgraded to window Live more Hotmails, it still does not work. I need to use the service immediately