This power supply will work with my PC?

Similar Questions

• This external modem will work with Satellite L500-1XL, running Windows 7

  Hello

  When in Spain, I need to use the dialing up to the internet through Telefónica.
  I guess that the L500-1XL is not an internal modem?

  This external modem will work with the L500-1XL running Windows 7?

  Thank you very much in advance for your help.

  A

  Hello

  You re right Satellite L500 doesn t have an internal modem, so you need an external.

  I think you can buy every modem that is compatible with Vista. Alternative ask your favorite computer dealer or authorized service provider

  A friend got good experience with USRobotics 56K modem like this:
  [USRobotics 56K USB Faxmodem USR5637 | http://www.amazon.co.uk/USRobotics-56K-USB-Faxmodem-USR5637/dp/B0019LZCEI/ref=sr_1_1?ie=UTF8&s=electronics&qid=1269253039&sr = 8-1]

• This power supply not work?

  Hello, I'm new here so bear with me. I have a HPE-560Z (HP Pavilion Elite HPE series Office) with Windows 7 Professional 64 bit, 8 GB of RAM, AMD Phenom II X 6 1090 t. (3.20 GHz) processor. My video card is what I would like to replace. I have in my computer an AMD Radeon HD 6450, and it is not enough for modern games. So, I bought an AMD Radeon HD 6970. The problem is, my power supply is strong enough, it is the only power of 300 watts. I would like to know if this power supply can be installed and work properly with the new video card: http://www.tigerdirect.com/applications/SearchTools/item-details.asp?EdpNo=1336023&CatId=2534 and if not, can someone show me a diet that works? Thank you!

  300 watts is not what you use right now... it is possible to add multiple items more and allow the operation of the short point. 400 watts recommended your new video card is the power supply note minimum system. A 500 Watt power supply covers this requirement and leaves a lot of room for additional components and maximum exploitation of the system. The Corsair CX500 and CX600 are highly recommended and a favorite forum... and because they are only around half an inch longer than the block of power SUPPLY HP stock, they usually adjust without causing problems.

  Frank

• This power supply will in a HP Pavilion G5410UK?

  Hi, Im running Windows 7 64 bit
  I Am aqquiring a power supply for my graphics card work and I was just wondering if this power supply would take?
  http://www.Amazon.co.UK/Corsair-CMPSU-650TXV2UK-enthusiast-series-performance/DP/B004O0P9TO/ref=sr_1...

  If you can not findout could you please tell me the Dimensions of the PSU that's already in the pre-built system, thank you in advance

  Hello

  You need to open your PC and measure the physical dimensions of your diet. Here is a list of the things to consider:

  1. technical characteristics
  2. the total power - important
  3. amperage 12 + v - important
  4 modular - is not required, but I like the flexibility
  5. guarantee
  6 i7 and SLI ready
  7. energy efficiency
  8 cost
  9. size - standard ATX PSU is 5.5 "by 5.9" by 3.4 "give or take a few tenths
  10. a single + 12 volt rail is a better choice.

  The Corsair PSU that you mentioned could fit but measure just to be certain. It's a two way street and you have to do some work.

• 29W power supply will work for iPad 9.7 Pro

  My iPad Pro 9.7 inches provided with a power of 10 watts. It takes about six hours is responsible for the depletion of the layer to be 100% responsible. I would like to be able to do it faster. I noticed that the iPad Pro with a larger screen has a 29 Watt power supply available in the Apple Store. I bought this with the cable Apple to convert USB type C USB 2, which I am connected to my Flash a USB cable.  When I try on my Pro 9.7 inch iPad it charges no faster than six hours. Anyone who has tried using a larger power and they have managed to improve the loading time?

  The smaller iPad Pro does not have lightning speed USB - C compliant connector which has the bigger iPad Pro, so the special USB - C cable and 29W power supply wiil lightning does not work with the smaller iPad Pro to load more quickly.

  Return these back to Apple for a full refund.

  Sorry

• This hard drive will work with a 4415 s HP's Probook

  Hello, I have a HP Probook s 4415 (black model with screen 14 inches). A spare hard drive I had, 455954-001 part number, would work with this laptop? Thank you!

  Hello:

  Only 160 GB HARD SATA 3.0 drive should work just fine in your 4415 s.

• It will work with former apple TVs remote?

  I just wanted to see if this new remote will work with previous Apple old tv. Anyone know? Thank you

  N ° the older Apple TV does not work with the new type of controller.

• Upgrading the video card and power supply, these will work with my system?

  Hello, I am wanting to update my graphics card as my current one is finally fall behind on current games, BF3 beta is a restless nighmare and BC2 must be smooth running low (ick). I was satisfied with the weaker graphics for now, but its time for an upgrade. In any case, I think I have my selected updates and I just want to confirm that they will work with my computer until I pull the trigger. My current equipment:

  HP p6180t

  http://h10025.www1.HP.com/ewfrf/wc/product?product=4010451&LC=en&cc=us&DLC=en&lang=en&tmp_track_link...

  Intel Core2 Quad 2.83 GHZ

  8.00 GB RAM DDR3

  Vista 64-bit

  Creative Sound Blaster X - Fi Audio Xrteme

  1.5 GB NVIDEA GeForce GT230 [DVI, HDMI, VGA]

  I plan on upgrading the graphics card on an Asus NVIDEA GeForce GTX 560 (Fermi)

  http://www.Newegg.com/product/product.aspx?item=N82E16814121446

  And the power of a passionate Corsair 850W 80 + CERT (I know this is perhaps an exaggeration, but I can update to motherboards in the future to run two SLI cards and do not want to upgrade again)

  http://www.Newegg.com/product/product.aspx?item=17-139-009&SortField=0&SummaryType=0&PageSize=10&PUR...

  I removed the side panel to check the dimensions of the new card and it looks like it fits. The only thing that could be a problem of release the cables SATA for the hard drive and hard drive because they are both plugged into the two slots, I don't think that the two superiors would be no problem at all. Depending on the thickness of the new card is also, it may be very close to the sound card that is spaced only a slit above the graphics card. I have another location available PCIe x 1 go back one level more that I should be able to plug the sound card in if there is no problem.

  My question is that these two will be compatible with my system? (physical limitations side)

  Also, can I change which SATA plug the hard drive and disc plug in, without having to reformat? Is it just unplug and plug in the new housing? (setting power off + unplugged of course) Basically passing SATA0 and SATA1, SATA2, and SATA3. Or do need to be filled in order? (0 then 1 then 2, etc...)

  Finally, If I can't move the sound of a standard card, do I need to do anything other than the physically move when the computer is turned off and unplugged?

  Any help is appreciated, thanks!

  John

  jkalbin,

  You have thought through all scenerios. Move the sound card does not any problems. The hard drive should stay in header SATA 0.

• If I purchased this computer about 4 months ago I can support windows 7 free? and the 64-bit system will work with windows 7

  If I purchased this computer about 4 months ago I can support windows 7 free? and the 64-bit system will work with windows 7

  This is the Forum for Windows Update.

  How does the Windows 7 upgrade Option?

  The Windows 7 upgrade Option is available through participating PC manufacturers on some PC and Microsoft on any purchase of packaged product Windows Vista. The Windows 7 upgrade Option applies to Windows Vista Home Premium, Business and Ultimate editions. Your upgrade to Windows 7 will be the comparable version: so you will get either Windows 7 Home Premium, Windows 7 Professional (upgrade to Windows Vista Business) or Windows 7 Ultimate, respectively. The Windows 7 upgrade Option program works on June 26, 2009 through January 31, 2010.

  http://www.Microsoft.com/Windows/buy/offers/upgrade-option.aspx

  Above Microsoft link has info for the Options to upgrade Windows 7 from participating computer manufacturers.

  Read the info here to see if you qualify.

  http://www.Microsoft.com/Windows/buy/offers/upgrade-FAQ-option.aspx

  FAQ about the upgrade is at the link above.

  http://www.Microsoft.com/Windows/Windows-7/get/Upgrade-Advisor.aspx

  Windows 7 Upgrade Advisor.

  http://TechNet.Microsoft.com/en-us/library/dd772579 (WS.10) .aspx

  Railways upgrade to Windows 7 at the link above.

  For any other question of Windows 7:

  http://social.answers.Microsoft.com/forums/en-us/category/Windows7

  Link above is Windows 7 forum for questions on windows 7.

  Windows 7 questions should be directed to the it.

  You are in the Vista Forums.

  See you soon.

  Mick Murphy - Microsoft partner

• A Capsule of 1 TB will work with OS 10.11?

  Because I like to keep all my Apple hardware, I was looking at getting a Time Capsule backup to my new iMac comes with OS 10.11 (El Capitan). My question is this - can anyone tell me if an older model of 1 TB (MB277LL/A) will work with my setup?

  Thank you

  Carl

  This model was abandoned more than 7 years ago and is officially classified as "obsolete" by Apple, which means that if you have a problem and are willing to pay, Apple still will not help you with this device.

  Most of the 1st Gen Time Capsules failed in about 18 months. Few make it to 36, and very little done to 60 months, so unless the model you are looking at has a new power supply and new hard drive that was installed in recent years, it would be best to stay away from this model.

  If the product has not been updated with a new power supply and hard drive, it's almost a miracle if it does not work.

  Assuming that really fall into place, you will need to check to make sure that the time Capsule has firmware version 7.6.1 or later version to make it work with your Mac using El Capitan.

• HP Pavilion HPE h8-1214: GPU EVGA GTX 750TI will work with my HPE h8-1214

  Hello. I plan to update my graphics card soon. Accoring to this, I have a card Mother Angelica. I read another post here of a user having a h8-1230 with a card Mother Angelica Revision2 , who said the EVGA GTX 750TI was inconsistent with this Council, and that he should look for a version of the 750TI MSI instead.

  I was wondering if the same applies to my PC because my model is older that the other user has been. I prefer to use the EVGA GPU version, as it is cheaper than the MSI one, but I need to know if it will work with my computer. If not, will the labour card ASUS model, or should it be MSI? The map I intend to buy is present (EVGA) or this (ASUS).

  In addition to this, does anyone know if the stock fans and 300W power supply provided with this computer would be appropriate for the new card, or not? I'm looking forward already pass the power supply, but I don't know for the fans. If I were to upgrade the PSU, 430W would be enough, or should I go with 500W? Thank you.

  If anyone in the future who might wonder, I had this GPU works on my computer, but I had to buy a specific version of the map and the way I got it to work was pretty weird.

  You need to buy this version MSI of the card, because the card itself has a switch on to change the UEFI to Jack supported BIOS Legacy. As far as I know, other versions of this card are UEFI only, and this computer does not support UEFI, so he needs a card that can run in the traditional way. It may look like a fit snug in the case, but it does not seem to cause problems and it cools very well with fans.

  I also changed to a block of power SUPPLY Corsair 430W, which seems more than enough for the system, even with the card to load max. You could go to a higher power, if you consider the upgrade of several pieces, or reuse the power supply in a more powerful system later. I have not upgraded fans in the computer and do not seem to have cooling problems.

  Now to make it work...

  I had some questions:

  When I first turned on the computer, it froze on the screen of the POST (the first screen with the HP logo). It would allow me to get into the BIOS, and it would beep 4 times (with long breaks between the two), before finally to a black screen with a cursor blinking and just stay there.

  What finally got it to work:

  I disconnected all the instructors of the map (cables VGA, DVI or HDMI), and then I turned on the computer. Without any monitor plugged, the computer should beep 6 times (the power button LED flashing with it), then the power led turns off. The LED went off as soon as I plugged my monitor into the computer (in my case, I used a VGA cord).

  For the first few seconds, the screen remained blank and does not save a connection. The computer is beeping intermittently for a while, then after about a minute my detected monitor suddenly a signal, and the screen displays the Windows splash screen. I was able to boot into Windows, all right, even if the resolution of the screen will be a little goofy, until you install the drivers.

  I jumped in the driver installation CD, and once it finished installing, I restarted the computer. Now, when it restarted, I had to do the same procedure I mentioned above so that he could start again. Now that the drivers are installed, I don't know if I'll have to do this procedure everytime I restart the computer (don't have not shut down since then), but since I rarely shut down my computer, it's worth it to me.

  Hope this helps someone else, because I know that I spent 10 hours searching for ideas before discovering this solution myself.

  Now that it is running, I have problems and I have run several graphics intensive games on it without any problem with cooling or power draw. It is very quiet, too. Even with a game running on high quality graphics, I can barely hear the fans when there is no other sound in the room.

• HP Pavilion H8-1120: Radeon HD 6970 will work with my motherboard?

  Hello

  I currently have a HP Pavilion desktop computer. The product is H8-1120, with model #QP771AA

  My motherboard is Carmel2 (IPISB-CU), with an i7-2600, 350W electric chip and the video card Radeon HD 7570.

  I wanted to play some of the newer games on the decent quality (usually, I would need to run on parameters below and even reduce the resolution, just to get 20 + FPS), and so I recently bought a new GTX 750TI graphics card to improve my computer with. But I had the same problem that everyone else did, where their HP Board would not accept the new card and nothing has helped my problem.

  Now I'm back TI GTX750 and I am looking for a good upgrade from my current GPU, at a reasonable cost, and I absolutely want to know, 100% that I won't not motherboard compatibility issues with the new gpu.

  I was looking at the graphics card Radeon HD 6970 and Radeon HD 6850 cards. Both are a little better than my other current graphics card, and I will also update the food too 550-600W.

  No one knows for sure if I'll be able to run the HD 6970 graphics card on my motherboard, with a 600W POWER supply upgrade? I checked online and the Radeon Series 6000 was released to the year 2010, a year before my current BIOS (FRIEND 7.16 / 10/05/2011) was released. My BIOS will be able to work with this graphics card?

  Bozhidarc, welcome to the forum.

  The reason why GTX 750 it won't work in your computer is to UEFI in the motherboard instead of a standard BIOS.  HP didn't start using UEFI until mid-October 2012.  I know the last video card that requires no UEFI EVGA's GTX 660.  Anything after this model requires UEFI.  The best thing to do is to find the card you like and contact the Technical Support of the manufacturer to ensure that it will work on your computer.

  MSI is a GTX 750 Ti with a BIOS card hybrid switch that allows to work with a standard legacy BIOS or UEFI.  Yet once, however, I recommend to contact MSI to ensure it will work with your computer.  I heard some members who have managed to make it work with the BIOS of their inheritance.

  Please click on the Thumbs up button '+' if I helped you and click on "Accept as Solution" If your problem is resolved.

• The 460W power supply will be sufficient for the GTX 1070?

  Just place an order for a R5 with an i7, GTX 1070 and a diet of 460W.

  I'm not going for the largest power supply, because I'm not a fan and do not upgrade components.  If the configuration of Dell said 460 page might work, I saw that he needed to upgrade the PSU. I preferred using the extra $100 for the video card rather than the 970-1070.

  Now, reading around forums, I continue to see comments that the recommended food for a GTX 1070 is 600 Watts (by guru3d.com).

  I still have time to cancel the order because it is very recent.  Do I need to worry about this power supply?  How would I know if it is not sufficient for use?  The frame rate would be low, or the stability of the system would show signs?

  Hello

  Yes, the 460W will work well if is unique. Check the image below and let me know if you need anything else:

  

• Adding a new power supply will void the warranty

  Hello

  I would like to replace the power supply 350w comes with the HP Pavilion p6-2378.  I have a 500w I'd replace it with.  Will this void my warranty?  This is the standard of 1 year.  I do that so that I can put a secondary graphics (AMD Radeon 4650 [assuming there is enough electricity to 500w?]) and take advantage of the GPU power and additional outputs. Then, would it be making void my warranty?

  Thank you

  Upgrade your PC with approved HP and parts supplied will not void your warranty.

  However, if you upgrade your PC with parts that are not approved HP and HP determines that the changes caused failure HP is not required to honor the warranty.

  Some PC outside the United States are delivered with seals and if broken the warranty is voided.  I have yet to see the seals on the PC of American consumers.

• InDesign CS5 will work with MacOS Sierra?

  Has anyone tried to see if InDesign CS5 will work with MacOS Sierra? I have creative cloud and CS5 on my machine, but due to some of the things that I have to work that only work with CS5 to CS6 I have to keep my old software. I hesitate to upgrade to Sierra until I know if InDesign CS5 will work or not.

  If anyone has tested this, I would be recognizing the return flow, thank you.

  It really depends what you do with it, and a large part of the framework has changes in the operating system for how the application is designed to run in. Your workflow can cause problems when the application works for others or you might be able to use it, but keep in mind has more no support for CS5 Adobe or Apple, so do not expect to solve any problems that you can discover.