This update (Security Update 2016-001 El Capitan and security update 2016-005 Yosemite) broke my iMac. I had to restore from Time Machine 2 times!

Similar Questions

• I got a new hard drive from apple. They have updated to El Capitan. This affects how I restore from time machine? A full restore allows you to copy on the new operating system?

  can I use time machine to restore everything, only the data, not the operating system

  Why would you go back to a previous operating system when you just got a new hard drive with the new operating system on it?

• File restore from Time Machine Yosemite to El Capitan

  I need to restore a single file from a Time Machine backup of Yosemite to my new iMac El Capitan.  The file in question has been saved from a Mac Pro from 2008 to a Time Capsule.  I put Time Machine in the dock and right clicked on it, so I could navigate "Other Time Machine disks" and I am able to see the Mac Pro to backup, then select it.  However when loading the backup, it's for my new iMac and not for the Mac Pro.

  How can I solve this problem?

  Hi jt

  To be honest, the easiest is to go through the Finder. Navigate to the document you want and copy. Then simply paste it where you want.

  The finder will allow you to see all of the back-ups no matter the OS at the time.

  Hope this helps, Greg

• Update of the absent or invisible e-mails in personal folders from Sierra

  My emails have disappeared from personal folders in Mail since macOS Sierra update from the previous version of El Capitan, indeed personal files themselves seem to be absent or invisible.

  New e-mails that arrived later, for which I put rules in place to move the email to a subfolder in my personal files seem to re-create or reveal part of the hierarchy of folder necessary to reveal or recreate the destination magically subfolder AND reveal not only the new email but also all other emails which were previously contained in this file. However, enamel and her sisters in this subfolder are actually visible once I left and reopened the Mail App.

  Very weird.

  Someone else had a similar problem and / or found a solution?

  Installed Sierra (from Yosemite) Wednesday. First I noticed that my Mail signatures had disappeared. Called Apple's Support, first of all a failure, was transferred to an older person. Repaired permissions, restored from Time Machine - still do not work. Discovered yesterday that some of my mailbox folders were empty, some had old messages, but not recent. A vain another senior tech and reported it to the engineering team.

  I have since discovered that the missing messages are there, but they are invisible in the boxes to the letters. When I do a keyword search, 'invisible' messages are returned in the search results (list as being in their appropriate folder), and I can read the full message of the search window. But if I open the file, it does not show.

  Also, I read in the Inbox of messages disappear after I read the. Demented.

• After updating Vista, no display on startup. You need to restart each time you start.

  Hello

  My pc worked fine months ago, but after an update to Vista, all of a sudden it started not to display what whether at start-up.

  Monitor work, Vista loads, because I can hear the opening melody of the speakers.

  But there is no display, I have a black screen. LCD monitor remains in stand by mode.

  To solve the problem, I need to restart the computer and go to guarantee the mode every time...

  After pressing the restart button, the monitor opens normally, I choose the secure mode, if I did not have Vista isn't black, again leaving the screen.

  After choosing safe mode, drivers and loading files and when I see the screen of the user, I restart Vista.

  That everything becomes normal... Vista starts normally.

  I've updated my ATI driver but nothing has changed.

  How can I resolve this display problem? To open my pc and be able to see my office properly, I need to restart twice each time you start...

  Try this:

  http://www.bleepingcomputer.com/tutorials/tutorial140.html

  Understand the Extras in Windows Vista and Windows Update info is at the link above.

   

  Remove the Vista updates; two ways to do this:

  1. a System Restore to before the updates:

  Click Start > programs > Accessories > system tools > System Restore > restore time/choose your own date > next

  If you use Norton, disable it before using the system restore.

  If it is impossible to enter the Normal Mode, do a Safe Mode system restore:

  Press F8 at the startup/power and the list of startup options, use THE ARROW key to select Safe mode > and then press ENTER.

  System restore steps according to the info above.

  Also:

  2. click on start > right click on computer > properties > Windows updates down the lower left corner > updates installed in the lower left corner in the next window

  > then click the one that you don't want > uninstall will appear at the top > uninstall it.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  In addition, on the page where you clicked "Installed updates", click on change settings at the top left corner it

  > Change update settings in the next page of AutoUpdate to "check for updates but let me choose etc" > OK ".

  When you take a look at pending updates, you can either download/install them one at the time, namely the update causing you problems.

  > or if you do not need an individual > right-click on > UAC prompt > hide it

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  And for Windows Update issues:

  It's updated operating system Vista, upgraded installation and activate Forum.

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• OSX EL CAPITAN UPDATE CANNOT BE INSTALLED TO THIS DISK. THIS VOLUME DOES NOT MEET THE CONDITIONS FOR THIS UPDATE

  Hi all

  My iMac features are:

  • 27-inch, late 2013
  • 3.2 GHz Intel Core i5 processor
  • 8 GB 1600 MHz DDR3 memory
  • Start drive Macintosh HD
  • NVIDIA GeForce GT 1024Mo of 755M graphics
  • Storage: 301,35 free GB of 999,35 GB

  Running currently on OS X El Capitan with Update Version 10.11.3 installed January 27, 2016

  Problem: I was on the purchase of 2016 Office for Mac and tried to install the update of El Capitan OS X 10.11.1 which is necessary to solve the problems with this version of Microsoft Office.  During installation, the following error message appears:

  "OS X El Capitan update cannot be installed on this drive. This volume does not meet the conditions required for this update".

  I would be very happy if someone can help me in installing this update.

  Thank you.

  Slpm6

  I just got a quick reply saying 'You are not allowed to create or update this content'. What should I do to solve the problem? Thank you.

  You are using a newer version of El Capitan that the updater contains and so cannot install it.

  (139598)

• Updated the macbook pro of el capitan and now will not start. Instead, I get the error message "your computer restarted due to a problem". Someone at - it suggestions on how to solve this problem?

  Updated macbook pro today for the latest version of el capitan and now will not start. Instead, I get the error message "your computer restarted due to a problem". Someone at - it suggestions on how to solve this problem?

  It would be helpful to post what the screen says.

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  https://support.Apple.com/en-us/HT204904

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

• I try to install the update update of security for SQL 2005 service pake 3. I have vista 2 this update applies to my computer I get an error code ff or c0000005

  I try to install the update update of security for SQL 2005 service pake 3.  I have vista 2 this update applies to my computer I get an error code ff or c0000005

  1. navigate to the following registry key (HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL.1\Setup)

  2. find the "Summary" (REG_DWORD), and then change its decimal value from 1 to 0

  3. restart the computer

  4. install the same update.  It should work.

• A security update (KB2584146) has been installed. It shows "installed successfully." Yet, whenever I have re-boot or run Micrsoft update, it offers this update again. Win XP SP3 (Build 2600).

  A security update (KB2584146) has been installed. After installation, it shows properly "installed". Yet, whenever I have re-boot or run Micrsoft update, it offers this update again. It shows also 'successful' in the history of my Microsaoft update. Win XP SP3 (Build 2600).

  It's an old update. Wonder why you just get it now.

  First try this...
  Click Start > run > type chkdsk/r > press OK or press the Enter key. A cmd window will appear telling you that the volume is in use and you want to plan its next reboot. Type y and press ENTER. Then restart.
  Try to install the update and check that it installed properly by doing another analysis of Windows Update.

  If this does not do...
  Download the update manually, on your desktop to the http://www.microsoft.com/en-us/download/details.aspx?id=28608.
  Click Start > run > Browse. In the Browse dialog box, double-click WindowsXP-KB2584146 - x 86 - ENU.exe. The box open term should have the path now. Add a space and an x at the end.
  Press OK or press the Enter key.
  You will get a dialog box with the path to your desktop already filled.
  After Office add a slash and the name of the folder so that we end up with something like C:\Documents and Settings\\Desktop\KB2584146.
  Go to this folder, and then in the SP3GDR folder.
  You can see packager.exe.
  Right-click to copy.
  In the box to run, type dllcache, then press on enter.
  Paste the file in there, replacing the one already there.
  In the run box, type system32, then press on enter.
  Paste the file there too by crushing the already there.
  Is there a lot of folder there. Make sure you do not paste in a subfolder. You want to the root of system32.

  Go to Windows Update and confirm that it no longer wants to install.

• A security update for windows THAT XP cannot install (KB2707511). Code received the error 0x80076BE. How to install this update?

  A security update for windows THAT XP cannot install (KB2707511). Code received the error 0x80076BE. How to install this update?

  Hello

   
  You are able to install other updates successfully?
   
  See the methods mentioned below and check if that helps.
   
  Method 1: Temporarily disable the security software.

  Note: Antivirus software can help protect your computer against viruses and other security threats. In most cases, you should not disable your antivirus software. If you do not disable temporarily to install other software, you must reactivate as soon as you are finished. If you are connected to the Internet or a network during the time that your antivirus software is disabled, your computer is vulnerable to attacks.

  Method 2: put the computer in a clean boot state to see if there is a software conflict as the clean boot helps eliminate software conflicts.

  How to configure Windows XP to start in a "clean boot" State
  
  http://support.Microsoft.com/kb/310353

  Note: After completing the troubleshooting steps in the clean boot, follow steps to configure Windows to a Normal startup State of the link section to return the computer to a Normal startup mode.

  Method 3: Follow the steps in the article.

  How to reset the Windows Update components?

  http://support.Microsoft.com/kb/971058
  Method 4:
   
  You cannot install updates from Windows Update, Microsoft Update, or by using the auto update after a repair of Windows XP after installing Windows XP SP3 immediately after a clean installation of Windows XP SP2 or
  http://support.Microsoft.com/kb/943144
  Hope this information helps.

• I am not able to apply this update (security update for Windows Vista (KB2536275) error code 800b0100.

  original title: I'm not able to apply this update (security update for Windows Vista (KB2536275) it gives me a code error every time

  For Windows Vista (KB2536275) security update will not be installed.  I get this error 800b0100 code.

  Hi Lydia,.

  Have you tried running the fixit http://support.microsoft.com/kb/971058 in aggressive mode?

• Update of security KB2538242. I continue to install this update, and it comes right back! He said even successful, but update still says I have to install why

  a security update for microsoft visual C++ 2005 service pack 1 redistributable package (KB2538242). Windows update custody arise with this update and download it. He said always successful install even in the history of the update, but two minutes later, he appears once again to ask me to install it! There are nearly 20 cases of this facility in my history of update! What's wrong with this thing?

  See http://answers.microsoft.com/en-us/windows/forum/windows_7-windows_update/why-does-kb2538242-say-installation-complete-but/6e285e8d-cc36-4c4a-8c1f-5e116a4ccea4

• I installed el capitan and my Nikon d4 won't tie up even with the LR 6.2.1 update. I read that it is a major problem for those of us who shoot professionally with this faculty. Is this ongoing development, and if so how hard is it going to be released?

  I installed el capitan and my d4 & d800 Nikon won't tie up even with the LR 6.2.1 update. I read that it is a major problem for those of us who shoot professionally with this faculty. Is this ongoing development, and if so how hard is it going to be released?

  Too late to not upgrade to El Capitan and my tech guy told me about 4 hours to remove the OS on. Unfortunately missed the chatter on the beta version. As I have the LR 6 disc version I guess that this fix will come out at the same time as CC?

• I want to confirm that the update of Adobe Reader 10.1.15 is legitimate.  This update apparently fixes security vulnerabilities and customer issues.

  I want to confirm that the update of Adobe Reader 10.1.15 is legitimate.  This update apparently fixes security vulnerabilities and customer issues.

  Hi Jeremiah,.

  Yes, the Player update 10.1.15 is legitimate.

  In fact, we released the latest patch 10.1.16 October 13.

  You can download the same: Adobe - Acrobat: for Windows

  For immediate release notes please reference: https://helpx.adobe.com/acrobat/release-note/release-notes-acrobat-reader.html

  Kind regards
  Rave

• Don t work under El Capitan and I don't get an update/upgrade? I've used until yesterday an old MacBook pro and Lion, everything was perfect with an opening. Now, with the new element (iMac) and El Capitan, I have problems.

  Don t work under El Capitan and I don't get an update/upgrade? I've used until yesterday an old MacBook pro and Lion, everything was perfect with an opening. Now, with the new element (iMac) and El Capitan, I have problems.

  It is not possible to update the version of Aperture is 3.4.5

  What can I do?

  You can only update if you have a version of the AppStore of Aperture - if your version of Aperture appears in the history of your purchases on the App Store. Update and then reinstalling.   See this tip of the user for more details:

  Update to Aperture 3.6 after the publication of Photos