Three beeps, then a regular boot

Similar Questions

• Three beeps when trying to install snow leopard

  Hey guys, this imac has el capitan, I am trying to reinstall snow leopard but I get 3 beeps. This research, I came across info suggesting either bad ram or I'm going to need at least a 10.6.7 to a flash drive as suggested in this thread here: three beeps when trying to install snow leopard

  I have the original disc from apple with 10.6.3. Possible to use this disc or my only option would be to try to get an OS x 10.6.7 on a USB? If so, I just found the 10.6.7 here: *.

  I have it on my windows desktop. I guess my next step should be to install on a bootable flash drive. So yes, I have a 16 gb flash drive that I use for windows, do I need to reformat for mac first and then copy the dmg file downloaded to it?

  < link published by host >

  You're right, three beeps point to a problem with the RAM. The first thing to do is to remove and reinstall ensure that it is firmly in place. If not, then replace the RAM, if you bought it from Crucial or OWC then the RAM has a lifetime warranty.

• my mac book does not light and I get three beeps while it tries to start

  my mac book does not light and I get three beeps while it tries to start

  Three beeps is almost always a problem of memory RAM.

• HP 4480 printer prints only first three lines, then stops

  Dear community,

  problems with my printer recently.

  Page begins printing, 3-5-7 lines, then stops, the printer says busy and the work never ends.

  Initially, there was a mistake with compatible OHCI 1394 host controller. I have upated the driver to that with the extension of the LEGACY software. He printed for a day and returned the nastiest non-printing again.

  Sometimes, the printer selects the fax mode and when I go into the properties to correct for PRINTER, it still doesn't work in the unual 3-5 lines of the page.

  I hate to throw my machine to landfill, be eco-friendly.

  Can someone tell me WHAT IS the reason for my problem?

  Need help URGENT.

  Laura

  Hi @multitasking,

  Welcome to the HP Forums!

  I noticed that your HP 4480 printer prints only the first three lines, then stops. I'm happy to help you with this printing problem!

  To get help, I'll need to know:

  1. The number of product/model of your printer. Follow the instructions in this link. Find your model number of the HP product.
  2. If you use Windows or operating system Mac and the version number. To find the exact version, visit this link. Whatsmyos.
  3. If the printer is connected, wireless, or USB.
  4. If the printer is able to make copies.
  5. If the power cable is connected to a surge protector, or directly to a wall outlet. Questions when it is connected to an uninterruptible power supply/Strip/surge protector power. This is true for printers and ink jet.

  Please see this post, want good answers? Ask good Questions, by @Bob_Headrick, then you can get the most out of these forums.

  If you are using Windows, please try the HP print and Scan Doctorand let me know what happens!

  Thanks for posting, and I hope to hear from you soon!

• Envy 17 2180el can I add a second hard drive, and then choose bios/boot of the system with which to start?

  Envy 17 2180el can I add a second hard drive, and then choose bios/boot of the system with which to start?

  in the case give me the link of a hard disk of type to add

  Hello

  While you can certainly add another HARD drive in the Bay of secondary drive (you must also support and the connection cable) you can't boot from it - only in the Bay of primary HARD drive is bootable.

  Kind regards

  DP - K

• Sleep mode will not work after sleep said she sleeps for 2 seconds then the computer boots back on its own.

  Original title: "sleep" mode

  Sleep mode will not work after sleep said she sleeps for 2 seconds then the computer boots back on its own

  Hello

  See if this information helps you, Vista and 7 work the same:

  "How to restore the default power Plan settings in Vista"

  http://www.Vistax64.com/tutorials/198047-power-plan-restore-default-settings.html

  "How to solve a problem of Mode Vista or Windows 7 sleep"

  http://www.Vistax64.com/tutorials/63567-power-options-sleep-mode-problems.html

  See you soon.

• Tecra M1: boots to the Toshiba - beep then continuous homescreen!

  in 'walk', the Toshiba start screen appears, and then nothing else happens. Any key pressed after that, quite a continuous beep. I bought the machine from a dealer, 2nd hand (500 books) with XP Pro loaded pre, all updates etc, everything worked fine until put on yesterday. This is my first laptop and the first time using this forum, 'be gentle please.

  Hi Alan,

  As soon as the Toshiba start screen appears and you should see the progress of the BIOS screen, press the ESC key. This can give you a clue as to what is happening.

  Please post back the results.

  Kind regards

• a beep, then 4 beeps per second and no startup EXP 8700

  Hi all

  I have an EXP8700 running 10 64-bit windows. Do you have the W10 last updated and the computer was working fine.

  Today, I tried to start. I get a signal, a break, then about 4 beeps per second going on forever!

  I tried another keyboard, but not chance I try to hit F2 F10 or F12 and cant' get out beeps

  Suggestions?

  Kind regards

  Mike

  What is a "EXP?" 8700? Do you mean 8700 XPS?

  Try to clear the BIOS:

  1. Power off, unplug
  2. Power button press / hold for about 15 seconds
  3. Open the case and remove the motherboard battery
  4. Power button press / hold for about 30 seconds
  5. (Reinstalling all the RAM, if is not currently installed)
  6. Replace the battery and case
  7. See if it boots with only mouse, screen and keyboard connected

• HP 15 Notebook PC: The with two beeps with long Bios boot pause inbetween

  When I start my laptop, it will be short beep... pause... short beep... and then start normally. He was always switched over to Windows, but I would like to know if it is tell a problem of memory or just what it is... And I couldn't find it on any lists of codes Bios that has the break. I don't know if it's important, in fact.  But I'd rather be safe then sorry. Thank you.

  Hello

  Should it be flashing led too? Please also check the lights and follow the instructions below to fix:

  http://support.HP.com/us-en/document/c01732674

  Kind regards.

• Windows vista stuck in mode hibernation, then received error/BOOT/BCD file.

  Windows vista stuck in mode hibernation, then received file error/BOOT/BCD, Oxc000014c of the State. I inserted the Windows Vista disc to plant but it goes back to the previous message.

  Hello

  Turn off the computer if it has not been extinguished because it started and wait 5 minutes so there
  is a complete reset of the material.

  See if this applies:

  Error message when you resume a Windows Vista Service Pack 1 or Windows Server-based
  2008-based computer after hibernation: "Windows failed to Start.
  http://support.Microsoft.com/kb/95752

  ----------------------------------------------------------------------------------------------------------

  More troubleshooting:

  / Settings (BIOS/CMOS) often F2 so watch the screen as it starts - set boot order for
  1 CD/DVD so it can boot the disk - you don't want to not install Windows - you want to repair.
  Don't forget to put it on hard drive first of all when you do not want to start on the DVD.

  Try the Startup Repair tool

  This tells you how to access the System Recovery Options and/or with a Vista disk
  http://windowshelp.Microsoft.com/Windows/en-us/help/326b756b-1601-435e-99D0-1585439470351033.mspx

  Try Options recovery or a disk of Vista startup repair.

  How to do a startup repair
  http://www.Vistax64.com/tutorials/91467-startup-repair.html

  ----------------------------------------------------

  If the above didn't help:

  At the prompt of the startup disk:

  Bootrec /fixmbr

  then

  Bootrec /fixboot

  See if you can boot from the hard disk

  If this isn't the case, restart on Windows drive:

  At the prompt of the startup disk:

  CHKDSK C: /f /r

  ----------------------------------------------------

  If necessary this 'peut' help: (not the same error however it may be useful)

  Error message when you start Windows Vista: "the Windows Boot Configuration data file is missing.
  required information.
  http://support.Microsoft.com/kb/927391

  ==============================================================

  If no help, the assistance of a computer store real (not the leeks and glances at a Best Buy or another Big
  Box stores) or system manufacturer support.

  I hope this helps.

  Rob Brown - MS MVP - Windows Desktop Experience: Bike - Mark Twain said it right.

• beeps then was my pirate computer?

  I just got the Inspiron 3847 a few days ago.  There Win10 Home version on it.  I use the Win10 firewall.

  I put my computer to sleep last night and pulled the seizure of power by the modem.  At 09:00 this morning, the computer was still asleep.  Then I heard the sound of the beep, maybe 5.  Then he stopped a beep.  I started to use the computer at 10:16.  I shoot to the top of the event viewer to see why it beeps.  He has shown a log on at 08:59.  Nobody else is there.  The power cord is still out there, when I plugged it in.  The monitor screen is never, until I woke up the computer.  I do not have a wi - fi router.  I will not sync a smart phone.  I had to connect to my account, when he awoke.  I don't know what to think of this.

  I noticed since I got this computer, it takes a long time to connect to my network.  I have to unplug the cable ethernet and power cord, so that it can establish a connection.  He appears on board and says something about a connection problem.  Then he resolved, after I leave it there.  On my computer of Win8 it always says that I was on a private network.  But this computer shows that it is on a public network.  It is connected via the cable only modem.  Here, any help would be great.

  kkay59

  I just got the Inspiron 3847 a few days ago.  There Win10 Home version on it.  I use the Win10 firewall.

  I put my computer to sleep last night and pulled the seizure of power by the modem.  At 09:00 this morning, the computer was still asleep.  Then I heard the sound of the beep, maybe 5.  Then he stopped a beep.  I started to use the computer at 10:16.  I shoot to the top of the event viewer to see why it beeps.  He has shown a log on at 08:59.  Nobody else is there.  The power cord is still out there, when I plugged it in.  The monitor screen is never, until I woke up the computer.  I do not have a wi - fi router.  I will not sync a smart phone.  I had to connect to my account, when he awoke.  I don't know what to think of this.

  I noticed since I got this computer, it takes a long time to connect to my network.  I have to unplug the cable ethernet and power cord, so that it can establish a connection.  He appears on board and says something about a connection problem.  Then he resolved, after I leave it there.  On my computer of Win8 it always says that I was on a private network.  But this computer shows that it is on a public network.  It is connected via the cable only modem.  Here, any help would be great.

  Hello

  If you had shot physically the power cable from the modem to your system would not have internet connection so it is quite doubtful that you have been hacked.  The tone could be a Windows task, which was scheduled for work at 09:00 (maybe a software or updates scan?)

  If you pull your power cord to the modem without disabling first / transform you the connection network may be responsible for some conflicts in your system network profiles, which could cause delay in this connection system to the modem / internet.   Windows 10 has a firewall that blocks most of the traffic internet access to your system if physically turn off the modem may not be the best way to prevent access.  Simply unplug the cable network would accomplish the same thing without forcing the modem to restart continuously every time you turn it on. (depending on your ISP may take a few minutes for this modem authenticate and receive internet access)

  With regard to the profile of your network, here are some links on how to set up your private in Windows 10 public network.

  A Discussion of Microsoft

  How to set a network Public or private in Windows 10 location

  I hope this helps.   If you are worried about someone access to your system, it should have with some security software and you can try having to analyze the system.   It can't hurt.   And learn more about the Windows Firewall more whatever security of your software firewall has.

  If you want more help, to make a little more efficient diagnosis please click on my user name Dell Todd and send me a message private with the Dell's Service number of your system.  Please keep all discussions and the troubleshooting steps in this public thread so that others with the same questions can see what is being discussed.

  Todd

• Wireless Internet w/QuickStart, but not with the regular boot of Win7

  I have a Pavilion dv4-4141us.  With QuickStart/QuickWeb, the laptop has no trouble to connect to my wireless network and Internet usage.  But, when I do a normal in Win7 start, although the lapop connects to wireless normally, it does not provide a connection to the Internet.  If I connect to the router via Ethernet, then cable and wireless connections are good.

  I compared the security type, MAC address, IP address, etc. and can't find no difference between the regular starting values and a quick start.  Troubleshooting Win7 app isn't any help. He recommends that I reboot the router - I did many times without any effect on the problem at all.

  I use the same network wireless with an iPad without any problem, and I have no problem using the Ethernet connection to share files and printers between the laptop, an other PC Win7 and Ubuntu Linux a PC.

  Bottom line: my HP laptop does everything well except wireless Internet (except in quick start mode).

  Hello:

  There the Broadcom 4313 WLAN card you find the parts list for your model.

  See if updating the driver for this card help.

  http://h10025.www1.HP.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-107849-1&cc=us&DLC=en&LC=en

• Fast beep then starts when you start XPS 8700

  so I just got a dell xps 8700 and immediately improved, the 650 Watt PSU and GPU to a gtx 980, when I start the machine he has has a very quick chirp and then starts as usual. given that I don't normally it starts the minute I got it that I don't know if this is normal or not, I think that I probably wouldn't put in updates before you start it at least once. Can anyone confirm if this is normal? or does that mean? I don't think that it s the code beeps it starts very well after the beep.

  What version of BIOS is installed on this system?

  Not sure if this is your problem but some previous versions of BIOS makes a quick beep at startup which was perfectly normal and indicated the JOB was complete. But it has been be mistaken one - beep error code meaning "card mother failure."  For later versions of the BIOS deleted the normal POST beep.

  As stated by Jennifer, you will need to restore the material to its factory condition to find out if your upgrades are originally the beep at the STATION. This is why it's always a good idea to test a new system first, before making any major hardware upgrade.

• How to click three buttons, then gotoAndPlay...

  
  I want the user to click three buttons in a scene, then go to a new image in the same scene. (Select 3 correct buttons and an anim "You win!" is displayed.) Sounds simple, but I'm not in ActionScript 3.0. If anyone can direct me to a response to the structure of the code, I would be eternally grateful!
  Thank you
  :-)

  He says he wants to click three buttons, and then play a frame. Not go to a new framework for each button. Looks like you need to set a variable and add to this variable whenever a button is clicked, then when this variable reaches 3, send again framework:

• Satellite L300 - 03C - updated to v2.2 BIOS update then fail to boot on XP

  The L300 BIOS - 03C v2.2 update does not boot on XP
  Model: PSLB8C-03C01X
  Help, please
  My OS is WinXP SP3, BIOS was v1.4
  using the latest BIOS V2.2 windows file to upgrade (v1.4)
  Progress is normally finished, however it fail to start.

  I still can get into the BIOS Setup, but cannot run Windows XP at the login screen.

  So, what can I do?

  Thank you

  What happen exactly when you start your laptop?
  HARD drive is recognized correctly in the BIOS settings?

  You can boot OS in SafeMode (F8 at startup)?