Three vertical gradient color Muse

Similar Questions

• Vertical gradient of CSS3

  Hello

  I'm breaking my head trying to understand this one... CC how to create a vertical gradient where the color flows from top to bottom, it is heartbreaking as a repeating pattern in dreamweaver.

  Here is my css:

  {body

  background-image:-webkit-linear-gradient(270deg,rgba(0,0,0,1.00) 0%,rgba(255,0,0,1.00) 100%);

  background-image: linear-gradient (180deg, rgba (0,0,0,1.00) 0%,rgba(255,0,0,1.00) 100%);

  }

  

  You could save a lot of head bumping by visiting this site then copy and paste the code in your CSS:

  http://www.ColorZilla.com/gradient-editor/

  Different browsers require gradients to be encoded differently, but this site doesn't handle most, if not all of them.

• Satellite P30 - three vertical lines appeared on the screen

  I have a problem with the display on my p30 110 three vertical lines appeared on the screen, the pc has been scanned with three different antivirus programs and seems to be clean any suggestions would be helpful

  Hello

  These problems usually occur due to a malfunction of the equipment.
  But have you tried to update the graphics driver. If this isn't the case, so I recommend to do.
  The update may solve some problems.

  However, if vertical lines persists then you should ask Toshiba service for assistance.
  He must check the laptop.

• White with vertical lines colored on Equium A60

  Hello

  I'm new on this but really need your help. My laptop is around the age of 18 months and has always worked well. Last week, I plugged modem broadband via Ethernet cable and configure the broadband services. A few minutes after doing this, when I looked back to the screen, he went all white with vertical lines colored it. I rebooted the machine etc and that's all I ever get now. As soon as I turn on, it will just right to white with these colored vertical lines.

  I tried to connect an external monitor to it and that works very well. The laptop is a Toshiba Equium A60. I'm worried that the screen is burned, it is possible for a power surge or something like that to go down the Ethernet cable and the screen shot?

  Thank you

  Adrian

  Display features has nothing to do with the Ethernet cable. Test with external monitor is very good, and on this way, you can see if the graphics card is perhaps responsible for that.

  From your description, I think that the view is the problem. Of course, just intensive display test can give more answers.

• gradient color in JDE 4.5

  I use Jde 4.5. I want to fill a rectangle with a gradient color effect rounded edge. I know it can be done in 4.6 above using the base class. Is it possible to do the same thing in 4.5 also

  4.5, you don't exactly "set background".  You paint using drawTexturedPath (drawBitmap that draws a rectangle, but you want a rounded, so drawTexturedPath is suitable).  For more information on how to create the correct path and types of points for a rounded rectangle, look here;

  Code of blackBerry to a rectangle rounded with gradient fill

  This article, however, uses the net.rim.device.api.ui.decor methods, which are not available prior to 4.6. You need to replace it with their drawShadedFilledPath with your drawTexturedPath.  DrawTexturedPath settings should be as follows:

  xPts, yPts, pointTypes - remove the above article

  offsets - null (once again, as in the article)

  xOrigin, yOrigin - 0, 0

  DUX, dvx, duy, dvy - Fixed32.toFP (1), 0, 0, Fixed32.toFP (1) respectively (you do not rotate or scaling the bitmap, are you?  Hell, maybe you are - if you use fields of different heights.  Then look at the parameter dvy)

  Bitmap - any Bitmap that you generate using suggestion of Hithredin.

  Good luck!

• Question of Tablet pressure. Possible to set the pressure gradient color =?

  Hello!

  Not sure if this is possible, but here's what I would do:

  
  Tablet pressure equal to the gradient colors.

  
  If I put the primary and secondary colors. The lighter I caress the closest color.
  Example of
  Color A = Blue
  Color B = Red

  Stroke light blue =
  Blow hard = red
  Way races = purple

  That would make really quick rough colouring I think. Can it be done?

  (CS5 + Intuos 4)

  
  Thank you

  / EDIT: also is possible in Gradients to use more advanced settings? Instead of having just 2 colors and a hotline between them, could I make a curved line? It's not as important as the main issue.

  IE: Beginning at 100: 100, go to 95:90, 90:80, 85:70... etc. 00:00

  Instead of 100: 100, 90:90, 80:80, 70:70

  Hard to explain

  Sorry, neither of the two options are possible.

• Pavilion g4: different vertical lines color, continue to change. Download fixesometime in 30-40 min. to work on it.

  It shows the different colored vertical lines. These continue to change, when I turn display down and on the rise again. Sometimes he corrected by this display rotation downwards and upwards. Sometimes half display work correctly with vertical lines on the screen half left. Someone if I play the video, then it is fixed in 20-30 min. There also get fixed when I display stand with a certain pressure (where screen and laptop are connected). If I leave the laptop on these lines, the screen comes on for 3-5 seconds and again the vertical lines are displayed. But the display work done after it is fixed. So, what's the problem?

  Hello @Ankit9,

  Welcome to the HP Forums! If I understand your message that you have a problem with vertical lines on the screen of your laptop Pavilion G4.

  From your description it looks like there may be a connection not tight since the changes in question according to the positioning of the screen, however, you can try after documents for video playback problems and a laptop LCD panel problem.

  If you need help, let me know and I will gladly make all that I can to help. If it helped to solve the problem, please mark this message as accept as a Solution.

  Thank you!

• Z50-75: gradient colors, color banding, dark / dim display (display faulty?)

  I'm having a horrible gradient on my new Z50-75 problem. Everything else seems good, but the quality of the display is terrifying. I'm afraid that this is not an unprecedented case. Is it possible if this Lenovo would sell such a display in 2014? I literally counted the shades of colors. First I thought it was a software problem, I checked all possible settings, gamma, saturation, brightness, bitrate etc. but they all seem fine. They promote this laptop as a multimedia device; screen restores all features multimedia strains. The nuances in the 1080 p movies count? Please tell me it's fixable.

  Link to photo/image

  Mod comment: Over size photo converted to establish a link.

  25/03/15 EDIT: revised subject line to improve research opportunities. Amy_Lenovo

  31/03/15 EDIT: revised once 2nd topic. Amy_Lenovo

  
  

• HP Officejet Pro e-all-in-6830: getting vertical lines color when scanning or printing

  My new printer prints very well.  But when I try to scan or copy, the pagae is filled with white and the vertical lines of color.  Any thoughts?

  Just talked to HP.  Clean the scanner bed with bottles of water and a lint cloth.  Do you have a hard reset by unplugging the power cord, wait 15 seconds and in him reconnecting again.  Now, scanning and copying work very well.  Go figure.

• cyan points 1 each and 1/16 "vertically 200 color MFP LaserJet

  This is a new printer.  Each sheet a cyan points every 1 and 1/16th of an inch vertically.  Normal user controls do not show anything obvious.

  A Visual examination of 120 + subject online blogs do not discover this problem.  What is missing for this purpose?

  57 copies black ink seemed to clear the cyan points.  I took control over color copies that now seem to be good.

• vertical stripes colored on screen

  My HP Pavilion dv5-1003nr running Windows Vista has a problem when the screen turns into colored vertical bands. I was not able to find a solution. It won't let me restore to a point before when I think that the problem occurred. the disks came with laptop so I can't reformat and start all over again. Anyone have a problem or a similar response? am able to boot into safe mode with network and it works very well. When I reboot start generally, I can work a while and then the screen becomes coloured vertical stripes. It happens far too often. Thanks for any info.

  We cannot say that the reformatting will fix the problem.

  If it's a problem of graphic material you have, the answer is no.

  You never have a drive to it, you should have a recovery Partition to reinstall Vista.

  Press F11 at startup to start the process.

  "Recover Windows Vista operating system using HP Recovery"

  http://h10025.www1.HP.com/ewfrf/wc/document?DocName=c00809678&LC=en&DLC=en&cc=us&product=18703

  See you soon.

• Many vertical lines colored on the second side of ADF scanner on HP LaserJet 400 MFP M425dn

  When I scan using the ADF on our MFP HP LaserJet 400 in mode '2-sided' M425dn, the back side of the scans (even-numbered pages in the PDF file) is wiped out by a good number of colored vertical lines. (see attachment)

  I tried to clean the ADF scanning window, but I do not think that these lines are caused by dirt or debris .

  Thank you!

  Ben

  There is a notice for this defect, as such I would say contact you HP warranty - there are a few steps to be taken to eliminate and recalibrate the scanner, if the problem persists then it is a module of formatting of replacement and recalibration is needed.

• Evenly space the gradient colors

  Is there a way to distribute evenly or the color space when you create a custom gradient?

  The eye is so these little squares of color that are the same distance is really hard, when you create a gradient with lots of colors.

  Thank you.

  It should work in CS6.

  I saved it as a single text file with the .jsx extension.

  When I run the script in CS6 (file > Scripts > other Script (but you can install it as well in the Scripts folder))

  I get this:

  

  Good response from Moluapple; https://forums.Adobe.com/thread/2153719

  Grad var = app.activeDocument.gradients.add ();

  var so = app.activeDocument.swatchGroups [1] .getAllSwatches ();

  var l = sw.length;

  grad.gradientStops [0] .rampPoint = 0;

  grad.gradientStops [0] .midPoint = 50;

  grad.gradientStops [0] .color = .color sw [0];

  for (i = 1; i< l="" -="" 1;="" i++)="">

  stop = grad.gradientStops.add ();

  Sw [i] .color = Stop.Color;

  grad.gradientStops [i] .rampPoint = i / (l - 1) * 100;

  grad.gradientStops [i] .midPoint = 50;

  }

  grad.gradientStops [l - 1] .rampPoint = 100;

  grad.gradientStops [l - 1] .midPoint = 50

  ;

  grad.gradientStops [l - 1] .color = sw [l - 1] .color;

• 'globalisation' of gradient color in CSS

  HY
  
  I use in my CSS file, a sort of "global": definitions
  
  .root {}
  -custom-color: #666666;
  }
  
  button {}
  -fx-background-color: color - custom -;
  }
  
  as I tried to make a 'global' gradient as
  
  .root {}
  -custom gradient: #F8F8F8, linear-gradient(#F8F8F8 0%, #E4E4E4 50%, #CCCCCC 100%).
  }
  
  I could not use this definition on my button (gradient did not appear)
  
  button {}
  -fx-background-color:-custom gradient;
  }
  
  It is known, or I'm doing something wrong with the gradient?
  
  BR

  Ok. I see it now. The question is this. The parser knows not that - custom-gradient is a [,] *. He sees the hex-digit hash and analysis as a color and then jumps on the entrance, that he does not understand until it hits the semicolon. I'm surprised that the parser spits a warning "I don't know how analyze it".

  The solution is that you must specify your layers in the background color - fx - and have - custom-gradient be just one

  .root{
      -custom-focus-color: #29420C;
      -custom-gradient: linear-gradient(#29420C 0%, #53801C 30%, #5E9718 100%);
  }
  
  .button {
      -fx-background-color: -custom-focus-color, -custom-gradient;
  }
  

• Center vertically in Adobe Muse CC page

  Hello!

  I wonder how do I Center a page vertically in Muse CC.

  / JoakimN73

  Hello Joakim,

  There is no output from the solution of the box for this in Muse. However, if you are good with coding, you can write Java Script to do this.

  Kind regards

  Aish