Thresholds to display recent updates causing
Recently, I installed 17 updates and after that the computer has rebooted (and updated some registry files) my screen was resized to not display ~ 2 inches on both sides. It shows everything, but just does not use the entire screen. I tried to change the resolution, but many resolutions have been out of reach (when they were not before).
Some of my features of the system:
- NVIDIA 9800 GT graphics card
- ASUS M3N78-VM motherboard
- AMD Athon II X processor 2 245
- VIA a high definition Audio card
- Westinghouse LCM 22w3 monitor (22 in)
I installed NVIDIA driver version 258.96 197.45 or 15.49 (don't know who), with noticeable change only being that now, I can change my resolution of 1600 x 900 on the NVIDIA Control Panel and changing the resolution but the chops off the coast of the same amount of space (so do not let me see the left or right of 2 inches of the screen including the Start button or the time). Change the resolution through the Windows screen resolution window still gives me "out of Range".
I checked for BIOS drivers and mine are up-to-date.
Help, please!
Hello
Was among the 17 updates that you have installed an update driver for the NVIDIA drivers?
You can restore the drivers for the NVIDIA graphics card to the previous version. For more information, see this link.
Restore a driver with its previous version
Hope the helps of information. Please post back and we do know.
Concerning
Joel S
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
Tags: Windows
Similar Questions
-
Recent update causes my App crash. What should I do?
Recent update causes my Adobe of Revel application crashing. What can I do?
Please see the post below updates on the issue of the revel facilities:
-
27 or 28 September 2010, a series of updates was installed automatically on my new Sony Vaio with Windows 7. I just bought the computer a week and half ago. After this series of updates has been installed, the wireless card would be the interface is no longer with the router. When I did a restore system before the update was installed, the internet worked. I left the computer load updates again - today, October 2, and again the wireless card would not work with the router. I removed the updates and the work of the internet. Please notify. I travel a lot and must be able to work online wireless.
Hello
1. what updates are?
2. what exactly happens when you try to go online after installing updates?
3. what operating system do you use?
Please answer these questions, that could help us help you better.
The next time that you install these updates, please check for red or yellow bangs inDevice Manager and send back the same.
Look for error messages in the event viewer. If you find error messages after return the exact error message so that we can help you better.
Measures to check the application event log:
a. click Start.
(b) in the search box type eventvwr.msc , and then on enter.
c. now, click Application in the event viewer (local).
d. now, looking for event log on the right side of the event viewer window.http://Windows.Microsoft.com/en-us/Windows7/open-Event-Viewer
http://Windows.Microsoft.com/en-us/Windows7/what-information-appears-in-event-logs-Event-ViewerThe articles above can also be used on windows vista.
Also take a look on the underside of the articles that might help you.
Why can't I connect to the Internet?Using the troubleshooter from network in Windows 7
Use Network Troubleshooter event logs to solve network problems
Thanks and greetings
Umesh P - Microsoft technical support.Visit our Microsoft answers feedback Forum and let us know what you think.
[If this post can help solve your problem, please click the 'Mark as answer' or 'Useful' at the top of this message.] [Marking a post as answer, or relatively useful, you help others find the answer more quickly.] -
recent update causing reboots repeated during step 3 of 3 updates...
The latest updates have been downloaded today and installed. To restart the computer, step 3 of 3 remained at 0% and then was restarted four hours, about every 5-7 minutes. The computer is running Vista Home Pro. There is a lot of space, 3 GB of RAM and a processor 2.3 Ghz of Intel in HD.
Any help would be appreciated.
Hello
Update you tried to install?
The following article might be useful.
An update is not installed successfully when you try to install the update in Windows Vista and Windows 7
http://support.Microsoft.com/kb/949358 -
BBM can only block the recent updates on bbm?
Hi @prince2012 about these steps:
Hi korn1
Welcome to the Forums of the BlackBerry Support
Although each BBM users want this feature is enabled and you don't
On your device Homescreen Open BBM > press the Menu key > Options > on this screen, there is an option under the headingrecent updates , it display recent updates None and uncheck the box everything in this article, and then save it. See if that helps.
is it possible on iphone?
Thank you
This option no longer exists, even for the BlackBerry devices OS and I don't think there is one for iOS users.
-
Display the column name of the column more recently updated
I wonder if it is possible to display the name of the column in the column most recently updated in a table.
Example:
Emp table
Name
Height
Weight
Age
Update_Date
Update_Column
Original record (03/20/14)
Name size weight Age Update_date Update_Column
John 03/20/14 Name
Then someone comes and update the height on 22/03/14:
Name size weight Age Update_date Update_Column
John 5'9 03/22/14 height
And the Update_date and the Update_column would change again if someone came and put a value for the age. And so on.
Is this possible?
Also, if the above is possible, would it be possible to display the name of extreme right column if a user updated several columns at the same time?
Example:
User updates the sub-folder:
Name size weight Age Update_date Update_Column
John 5'9 03/22/14 height
And adds weight and age at the same time on 24-03-14:
Name size weight Age Update_date Update_Column
John 5'9 150 31 03/24 / 14
The Update_Column would display age because it is the furthest to the right. (Think by reading from left to right, the column that has been updated if the extreme right)
So to sum things, I need to be able to display Updated_date (which will be the date of the day when the record is the last updated) and Updated_Col (which is the column name of the column was last updated, and if multiple columns are updated then display that value has been updated last in)
I hope that the examples help to clarify things.
Thank you
Steven
I think I found a solution.
delimiter //
create table a (
id int (10) unsigned auto_increment,
a int(10),
b int(10),
update_date datetime NULL,
update_column varchar(16) NULL,
primary key (id)
)//create trigger bu_a before update on a for each row begin
set NEW.update_date = NOW();
set NEW.update_column = NULL;
-- you need to start with the rightmost column if you want
-- that matched with the highest priority
if OLD.b != NEW.b then
set NEW.update_column = "b";
elseif OLD.a != NEW.a then
set NEW.update_column = "a";
end if;
end //TEST
insert into a (id,a,b) values (1,1,1), (2,1,1), (3,1,1), (4,1,1)[
update a set b = 2 where id = 2;
update a set a = 2 where id = 3;
update a set a = 2 where id = 4;
update a set b = 2 where id = 4;
select * from a;DISPLAY
ID A B UPDATE_DATE UPDATE_COLUMN
1 1 1 (null) (null)
2 1 2 March, 24 2014 23:22:33+0000 b
3 2 1 March, 24 2014 23:22:33+0000 a
4 2 2 March, 24 2014 23:22:33+0000 b -
A recent update of Yosemite caused serious conflicts with my computer. Apple has decided to re - install the original Yosemite and update. This has been successfully done, now, I have to re - install any third part software, but Adobe system is
Connect to your paid account of Cloud to install the cloud
-Connect using http://helpx.adobe.com/x-productkb/policy-pricing/account-password-sign-faq.html
-https://helpx.adobe.com/creative-cloud/help/sign-in-out-activate-apps.html
-
Cannot display gmail after the recent update of firefox
I've recently updated to 13.0.1. Now I have I try to access gmail my browser fills up with all sorts of strange symbols. I looked around and there seems to be a character encoding problem, but I can't understand it. I tried to play with the menu character encoding with no luck.
Hello
Please check if this happens in a new profile. If the new profile is correct, you can then reset Firefox on the old (previous) profile via the help (Alt + H) > troubleshooting information.
-
Capacity lost to bookmark pages after recent updates
Firefox has been working great until recent updates of the version 39.
I have now lost my ability to bookmark a page. When I click on the star icon as I always got it, the Star turns bright blue and gives the appearance that the bookmark is transferred - or "thrown in"-the bookmark icon. But page never appears anywhere in my favorites.
Before when I clicked on the star, I've always had a box that would allow me to change the name I wanted the bookmark for the name of the bookmark and the Bookmark menu different locations I could choose as to where I wanted to go. Now I don't get any box.
I know this must be a consequence of the recent update changes and not something in my computer because I have never had this simulation to "launch" the bookmark before. Or the brilliant blue star.
OK, try clicking on default settings, as shown - controls customize Firefox, buttons, and toolbars.
If it doesn't it try Mode without failure of Firefox to see if the problem goes away. Firefox Safe mode is a troubleshooting mode that temporarily disables hardware acceleration, restores some settings and disables add-ons (extensions and themes).
If Firefox is open, you can restart Firefox Safe mode in the Help menu:
- Click the menu button
click Help
then select restart with disabled modules.
If Firefox does not work, you can start Firefox in Mode safe as follows:
- On Windows: Hold down the SHIFT key when you open the desktop Firefox or shortcut in the start menu.
- On Mac: Hold the option key during the startup of Firefox.
- On Linux: Exit Firefox, go to your Terminal and run firefox-safe-mode
(you may need to specify the installation path of Firefox for example/usr/lib/firefox)
When the Firefox Safe Mode window appears, select "start mode safe."
If the problem is not present in Firefox Safe Mode, your problem is probably caused by an extension, theme or hardware acceleration. Please follow the steps described in the section Troubleshooting extensions, themes and problems of hardware acceleration to resolve common Firefox problems to find the cause.
To exit safe mode of Firefox, simply close Firefox and wait a few seconds before you open Firefox for normal use again.
xxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxxx
If still no joy, try refresh (called "Reset" in older versions of Firefox) which can resolve many issues by restoring Firefox as his default from factory and save your bookmarks, history, passwords, cookies, and other essential information.
Note: When you use this feature, you will lose all the extensions, toolbar customizations, and certain preferences. See article Firefox Refresh - reset modules and parameters for more information.
Refresh for Firefox:
- Open the troubleshooting information page using one of the following methods:
- Click the menu button
click Help
- Click the menu button
and select troubleshooting information. Should open a new tab containing your troubleshooting information.
- Click the menu button
- If you are unable to access the Help menu, type Subject: support in your address bar to bring up the troubleshooting information page.
- At the top right of the page, you should see a button that says 'Refresh Firefox' ('reset Firefox' in older versions of Firefox). Click on it.
- Firefox closes. Once the update process is complete, Firefox will display a window with the imported information.
- Click Finish and reopen Firefox.
-
recent update of 2600n spooler error killed my printer!
I have restored, updated, everything! As soon as the printer is accessible, a spooler service stopped running is displayed error! Believe it's due to a recent update - one day, everything works fine, the next day, my printer is DEAD!
Hi frustrated1956,
1. what update is causing this issue?
2. What is the exact error message?We found a similar question on the HP website; Take a look: 2600n - Print Spooler SubSystem App Error Message
In addition to the above article, try the following steps
Step 1: Run the Microsoft diagnostic tool
a. visit http://support.microsoft.com/gp/printing_problems
b. click 'Run now' and run the tool successfully.
c. check to see if the problem persists.Step 2: If the problem persists, reinstall the printer
see install a printer .For additional support, post your request in the Forums of HP.
Visit our Microsoft answers feedback Forum and let us know what you think.
-
Japanese text replaced by boxes after the recent update of Windows
Windows 7 can not represent the Japanese text after that Windows Update - changes the text boxes - applies to all applications - itunes, Windows Live Mail - mail header text replaced by boxes. The emails themselves are not affected - Japanese content can be displayed. Made a restoration and Japanese text returned. However then windows update again and the Japanese text has been lost, which means that this issue is one of the updates.
Hi HiniKuru,
Allows us to try to understand the problem causing the update.
Install the updates, if the problem persists
You can try to change the display language for the Japanese, follow these steps:
1. click Startand type change display language in the box start the search .
2. click on view change of language.
3. in the drop-down list that appears, select the language (Japanese) that you want, and then click OK.
Now, check if the problem is resolved, if the problem persists
Follow the steps mentioned in the link below
Windows 7 language packs are available for computers that are running Windows 7 ultimate or Windows 7 Enterprise
http://support.Microsoft.com/kb/972813
Uninstall the most recently installed update until find you the problem causing the update:
1. click on start to reduce this includes this image, type Appwiz.cpl in the Start Search box, and then click Appwiz.cpl in the list of programs . Collapse this includes this image if you are prompted for an administrator password or a confirmation, type the password or click continue.
2. click on view installed updates.
3. click on recent update (go by the date) that you want to uninstall, and then click Uninstall.
Follow the instructions that appear on the screen to complete the uninstall process.Note: It is not recommended to uninstall an update; We try the following steps to understand the problem causing the update. Uninstall an update at the same time, restart the computer each time and check if the problem persists.
Let us know the problem causing the update (make a note the number of KB) and let us know for further investigation
For more information, see the link below
http://blogs.msdn.com/E7/archive/2009/07/07/engineering-Windows-7-for-a-global-market.aspx
Thank you, and in what concerns:
Ajay K
Microsoft Answers Support Engineer
Visit our Microsoft answers feedback Forum and let us know what you think.
-
I have 30 + our organized in thunderbird and I structured the list of accounts to get a quick overview of all accounts. the recent update to thunderbird things around substantially changed; now local folders are down on the list and imap accounts are on top. I can't find a way to change where to display the local folders; the add-on "Manually sort folders" does not help with the position of the files local vs other accounts.
What Miss me? Any thoughts?I found the solution: the add-on "manually sort orders" has been altered after the Thunderbird upgraded. I've uninstalled and reinstalled it and the possibility of local folders on the top worked again.
-
Recent updates: is it a record?
Hello
I have automatic updates enabled. While on my user (without right of admin) account I received a notification that some updates cannot be installed automatically. The note gave options 'Install' and 'later '. I clicked on "install".
Then, I wanted to check what had been installed. I went to my Admin account, AppStore launched, and click updates. Response was "there is no update available". Curiously AppStore did not display the usual list of "recent updates". So I couldn't find just, which had been installed. Or, for that matter, no trace of any software provided by Apple has recently been installed.
Is there a way to check what software provided by Apple was recently installed on the computer by the Automatic Updates feature or manually?
Thanks in advance.
Your Mac keeps a record of each update or application (applications third too) installed. You can check by going to menu-> about this Mac-> system report...-> facilities Apple. (You can find facilities in the box on the left after pressing 'system report... »). Then, just sort by Date to install and check the updates installed on your computer.
-
I've recently updated to El Capitan 10.11.5. Since then, my Mac is running very slowly. Help!
Hello
Much easier to troubleshoot why your Mac is slow so after upgrading of the El Capitan if you download and run EtreCheck
Then copy and paste the results in your response.
NO personal data is shared in the report.
This should give us an idea of what is causing the problem.
-
Color LaserJet M277dw MFP: Cartridge not recognized after HP recently updated.
I can use WIndows 10 if the fix is available for this OS.
I recently updated my HP LaserJet, and after the update, he refused to print, scan or copy. The error message on the display says: "Cartridge not recognized" and it has a large image of the yellow and black cartridge, cyan and magenta those smaller, but below. The printer has a wireless connection to internet.
Any help would be greatly appreciated.
Thank you
Hello
Install the following firmware for your printer, and then look for a difference:
Kind regards
Shlomi
This corrects the problem? Please report to us!
Thank you.
Maybe you are looking for
-
Access through my own security questions!
I'm trying to re - put my security questions, but Apple won't let me until I answered to current security issues. I tried, but he repeated to me that my answers are incorrect. Therefore I can't go forward. Can someone please help/advise? Access throu
-
How to change the Boolean flag rectangle into 2 triangles.
The notation for a valve is two triangles whose ends are touching. I want to show images of the valve as indicators Boolean - red = closed and green = open. Is it possible to change the standard indicators normally rectangular or circular shape to
-
NAT on XBOX 360 with WRT150N problems
Hey guys,. For some reason, we had some problems with our NAT type for our xbox. We have a good (green) connection, but the NAT type always appears as "moderate." Right now, we use the (configured for the xbox) standard wireless card to connect to ou
-
CD burned in windows Media Center does not play in car cd player
The cd I burned using windows media center will not play in my car. Says "bad CD". But he does not play in my cd player. I don't understand??
-
I already have a signature under fill &; sign how do I add another?
I already have a signature under fill & sign how do I add another? I don't see any option to type, draw or select a picture. Cannot choose the current signature or initials.