Thunderbird 24 pop server authentication

Similar Questions

• Thunderbird 31 will not download the messages from the pop server (to 24 worked) CAUSED by Avast

  TBird updated to version 31, it will not download the messages of my pop server. I can send, but not download messages. I restored Win (7) at an earlier date to return to the version 24 of Tbird, and everything worked OK.

  TBird later Auto-setting to update itself (ugh!) back to 31, and we don't go again, no E-mail download. I changed the settings to Win firewall, even tried that turned off completely for testing, without any difference. Retarted Tbird and win several times, no go. It's extremely frustrating. Does anyone actually * test * software updates before releasing these days here?

  TBird works very well for me in Linux Mint 16, but this glitch under Win 7 just jumped to the top with the upgrade to 31.

  Thanks for your suggestions, you can offer!

  the typical suspects are AV and firewall software.

  Start * Windows * safe mode with active network
  -win7 http://windows.microsoft.com/en-US/windows7/Start-your-computer-in-safe-mode

  Always in Windows safe mode, start thunderbird in safe mode
  - http://support.mozillamessaging.com/en-US/kb/safe-mode

  Problem disappear?

• connect to pop server but not download emails

  I start TB and lower left know connected to the server + my e-mail (pop server) the right down bar showing the green progress go allong ths 9/10 and stops download no emails can leave 29 mins without effect it is a portable 8.1 win norton 360 all Tbird AND programs up to date.
  Also have 2 desktops windows 7 norton 360 on the same two parameters work fine ideas two thunderbirds why Download emails stopped about 5-6 days ago can still send emails simply not receive / download

  Thank you

  Norman

  Disable Norton have mail scanner. I think you'll find it's the fly in this ointment jar

• My server type must be an IMAP e-mail server, but both the standard Wizard and custom wizard to make a type of pop server. Nothing works.

  The first time I tried to install thunderbird, he automatically gave me an IMAP setting. I had the opportunity to change setting of pop. I couldn't do that. It was just the first time. Then I went into the settings of the server and passed under the name of the POP server to imap.fsu.edu. However, the words above the area, who say "Server Type: POP ' do not change. When I try to open Thunderbird I get the error message "error on POP3.

  I deleted Thunderbird 3 times and reinstalled three times, twice by using the custom setting. I have never yet to choose IMAP instead of POP, and every time I get the message when the Thunderbird open POP3 error was given.

  If the installation wizard does not get the account of the installation of work settings and do a manual install.

• Cannot connect to pop server of windows Messaging.

  Cannot connect to pop server of windows Messaging. Download the following error msg.:Account: 'pop.att.yahoo.com', server: 'pop.att.yahoo.com', Protocol: POP3, server response: '-ERR [AUTH] username/password invalid ', Port: 995, secure (SSL): Yes, Server error: 0x800CCC90, error number: 0x800CCC92

  Hello

  I suggest you to refer to these links and check if it helps:

  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-mail-setting-up-an-account-from-start-to-finish

  http://Windows.Microsoft.com/en-us/Windows-Vista/troubleshoot-problems-with-Windows-Mail

  It will be useful.

• Flash Media Server Authentication component software plug-in installation question

  I downloaded the Add-in authentication for use with FME 2.5 and have been unable to install it. I'm trying to install it on my local computer that is running the development version of FMS. If anyone can shed some light it would be great. Thank you

  We have just released a new version of the Add-in to Flash Media Server Authentication for FME 2.5 that works with the release of Flash Media Server relies. You can find it at http://www.adobe.com/go/fme with version 2.5 of FME.

• Thunderbird ask IMAP4 server, my server is POP, how to change server in Thunderbird?

  I run Win 10 and Thunderbird 45.4.0

  Cordially Egil Hoyvík

  Create an 'account' in Thunderbird, this time be sure to what you're saying to use POP instead of IMAP:

  Thunderbird menu: Tools: account settings. Click on the 'Account of Actions' button at the bottom left and select "add an E-mail account".

  Enter your name, E-mail address and password, then click on the continue"" button.

  Now you will see one of the two examples that I have attached a photo here.

  In the first example, you will see a 'radio button' in the Middle for either IMAP (remote files) or POP3 (keep mail on your computer). Make sure POP3 is selected, then continue.

  If what you see, it's like my second example, then next entrants is a button that you can click to change from IMAP to POP3. Continue from there.

  Once your new account in Thunderbird running, then delete one non-working of the account settings. Select the non-working account, click on the button 'Actions account' and choose 'delete account '.

• With release installed 31.5.0 today I no longer can connect to the pop server

  After the installation of the 31.5.0 version 2/25 I am more able to send or receive emails, I get the following message when you try to send an email (I have attached a picture of the screen of this species and the error console)

  "The message sending failed. The message cannot be sent because the connection to the SMTP- smtp.mail.yahoo.com server failed. The server is may be unavailable or refuses the SMTP connections. Check your SMTP server settings are correct and try again or contact the server administrator. »

  When you try to receive emails that I get the following:
  «"[email protected]: connection to pop.mail.yahoo.com"»

  Before the 2/25 that will change to 'logging in '. "and I had received my email.

  I am able to connect to my accounts on yahoo.com and see / send email it. On a 2nd machine using another package of e-mail, but share the same router / internet access I could send and email and received it.

  I checked the settings on both accounts. I am at a total loss. I read that someone is using System Restore to return to 31.4, but I would rather fix it if possible. It looks like a bug in the version 31.5.0. Thank you

  Steve Brown

  Check your firewall and see if it has blocked the new version of Thunderbird.

• iPhone deleted all saved messages when I changed 3 pop server

  I have an iphone 6 + with the last update of ios, and he seems to have hit a problem.

  I've moved my domain name to another Web host, downloaded all my mail on my phone and went in and put in the new pop 3 Server.

  Messages have been downloaded on my phone, and was not an imap server. Now my Inbox is wiped away, and I don't understand why

  Nevermind, don't use your iphone for mail

• incoming mail POP server

  Location of mail incoming server POP

  http://www.SimpleHelp.NET/2007/02/07/a-beginners-guide-to-setting-up-Windows-Mail/

  Link above has an easy to follow Guide to set up Windows Mail.

  Contact your ISP (Internet Service Provider).
  
  They offer your broad band/Dial-up connection.

  Ask them to:

  username
  password for your service account to wide band/Dial-Up with them

  Server of incoming POP3 mail
  outgoing mail SMTP server

  The above information is required to set up Windows Mail.

  ISPS are usually happy to help you set up your email account.

  See you soon.

  Mick Murphy - Microsoft partner

• When I try to email using Windows, I get: Acct: POP server: SMTP, Protocol: SMTP, Port: 25, secure: no, Socket error: 11101, ErrorNumber: 0X800CC0D. Does not send mail... Help!

  When I try to send an e-mail using Windows, I get the error message shows: account: POP. Server: SMTP; Protocol: SMTP; Port: 25; Safe: No; Socket error: 11101; Error number: 0X800CCCOD.

  Not surprising. Name of your server is not SMTP and your account name is not POP. You need get the settings appropriate to your mail server.

  Windows Mail: Setting up an account of end-to-end
  http://Windows.Microsoft.com/en-us/Windows-Vista/Windows-mail-setting-up-an-account-from-start-to-finish

  A guide to setting up Windows Mail beginner
  http://www.SimpleHelp.NET/2007/02/07/a-beginners-guide-to-setting-up-Windows-Mail/

  Bruce Hagen MS - MVP [Mail]

• BIS blackBerry smartphones and POP server not accessible via internet

  Hey guys,.

  I think I have some 9000 "BOLD" for some users at work.

  We currently have a pop3 mail server that is not accessible via the internet. (Not webmail)

  I could use BIS to push mail for the "BOLD" and would it synchronize deleted items / sending and reading of the "BOLD" back to my mail server?

  I don't see how an email that I deleted the "bold" be synced to outlook on your laptop.

  Kudos for taking the time to read my post.

  

  Hi and welcome to the Forums!

  BIS, serves as an intermediary between the messaging services connected to the internet (POP, IMAP, etc.) and BB. If the server you want to interface to these BB is not connected to the internet, then BIS can not access.

  BES might work... you would have to buy and host BES in-house (after make sure you it can interface with all your internal mail server is, of course), and then facilitate the communication between your internal mail server and your business from BB. I don't know the level, but I think that the financial investment to reach BES is not negligible.

  Good luck!

• NTP server authentication

  I'll put up the master NTP server on Catalyst 4000 series switch. I want to implement authentication between the server and the client. I have the following commands is not working.

  What's wrong with the commands below?

  Server:

  NTP-1 xxx md5 authentication key

  authenticate the NTP

  NTP master 6

  NTP max-associations 10

  Client:

  NTP-1 xxx md5 authentication key

  authenticate the NTP

  key to NTP server 10.0.0.1 1

  AV

  I think there are two separate issues here and they are not really related to each other. It is a question if your switch must be configured as master ntp. If the switch is configured as master ntp, then it will offer his version of time that it is authoritative or not (either correct or not). I think it is a bad idea and hope that this is not something that you did intentionally.

  The other question is why the switch is not hours of instruction from the marine server. It seems that there are several reasons why this can happen. It is possible that the NTP requests you are not to get on the server or the server responses aren't you. My guess is that it probably is, since the show ntp association does not show a reference to the server of the Navy clock. Or it is possible that the NTP response is you but there's not enough variability in traffic through the network switch is not able to synchronize with the server. I saw a customer network when it's a problem for a while.

  I would say the next step could be to debug ntp package and see if you send to the correct address and see if you have found answers.

  HTH

  Rick

• MRI / sealing server / authentication / Active Directory

  Hello
  
  I want to use 11g "Sealing Server" to unsealing documents.
  
  Documentation:
  "The current version supports basic HTTP authentication.
  http://download.Oracle.com/docs/CD/E17904_01/user.1111/e12326/isvsealedcontent002.htm#sthref46
  
  Is it posible to use authentication Windows Active Directory with "sealing Server?
  
  
  Thank you.

  Hello

  The authentication scheme supported only for sealing services is basic authentication.

  Kind regards
  Frank.

• RoboHelp 6 Server authentication

  New construction RoboHelp 6 Client & server on Windows 2003 SP2 server for production (test version worked well on my XP desktop).
  
  Installation (to start) server and client on the server as well as the control of code Source Robo. Everything works fine (thanks for the missing MFCLOC. Adobe DLL). Can add to source code control, archive, discover, download and generate. Publishing does not work
  
  WARNING: Impossible to publish on "connection to server {}. reason: cannot log on to the server: {server}. Server does not support any type of authentication method.
  
  What? All running locally on the server with the same user account, with that I installed.
  
  Any ideas?

  After running vcredist_x86.exe install missing. DLL as mentioned in previous post and running through this kb: http://kb.adobe.com/selfservice/viewContent.do?externalId=rb_47486&sliceId=2

  Everything works!