Thunderbird displays always the message in the form 01 month (January); computer has the correct date.

Similar Questions

• My Thunderbird consistantly shows date of tomorrow on the incoming and outgoing emails. even if the system clock and clock Windows indicate the correct date. Help.

  My installation of Thunderbird seems to use a 24 hour clock before the actual time. For example the received messages on December 25, 2014 are dated December 26.

  In addition, when I answered a message entering today, December 25, automated header said that I was responding to a received message on 26 December.

  System clock of my computer and the Windows clock to show the correct date.

  Y at - it no way to force the Thunderbird to read again the system clock, or any other way to reset the time internal Thunderbird?

  Thunderbird uses your computer's clock. There nothing else for reference. I suggest you double check that your clock to the time and time zone. There is no reason to look at the bios to check the computer's clock.

• I received a message stating that resources were low. Computer has crashed and when I turned on the computer had black screen

  Original title: drive full D... computer laptop unusable

  I have a HP Pavilion dv7 laptop... computer.  Two months ago I saved mistakedly C drive to D drive.  I soon messages that D was 85% full... knew that I'd made a mistake... bul everything seemed OK.  Has nothing on this subject.  Yesterday, I received a message stating that resources were low.  Computer has crashed just after that.  The computer turns on with only a black screen.  Pressing F8 does not start in safe mode as it does on my PC.  Can someone help me?  Thank you!

  Hi SteveKinney,

  ·         What version of Windows is installed on your computer?

  ·         What is the exact error message?

  ·         Did you do changes on the computer before the show?

  Follow the suggestions below for a possible solution:

  Method 1: Start in safe mode and do a System Restore to a point before the show.

  See Advanced startup options (including safe mode) for more information about starting in safe mode.

  Method 2: See the following articles and check if the problem still persists.

  Why my screen is black when I start Windows 7?

  http://Windows.Microsoft.com/en-us/Windows7/why-is-my-screen-black-when-i-start-Windows-7

  See also the article mentioned for more information:

  Resolve stop (blue screen) error in Windows 7

  http://Windows.Microsoft.com/en-us/Windows7/resolving-stop-blue-screen-errors-in-Windows-7

  I hope this helps.

  Thank you all... I brought to a repair shop... He says that the LCD is toasted, the date is displayed correctly on another monitor.  About $200.

• Display of the correct answers

  Hey guys,.

  I have a few quiz I do in captivate 6 and this I was wondered, is how I could go about setting the quiz so that if the user enters an incorrect answer, we would get not only the standard:

  INCORRECT ASNWER - CLICK ANYWHERE TO CONTINUE

  But we could get extra information that displays what the correct answer was / is

  It would display the message above standard, "Sorry, wrong answer" it currently displays, but also it would Display the "is the correct answer to this question:" and then display the correct answer. We would not reset the question and give them another chance at it, but for the purpose of building end-user, is it possible to stove display the correct answer to an incorrect answer?

  What is this kind of advanced possible action?

  Thank you very much for any help!

  Jon

  OK... admission time. Everything does not have the two together on that one. I'm sorry for asking such a stupid question. I am new to the quiz from this angle. It was so obvious that I feel a little dumb. Thanks for the reminder that all you have to do is add text to the Red block.

  This thread will self-destruct...

• Windows Media Center EPG does not have the correct data

  Windows Media Center EPG on my computer is so ugly!

  Description is separated in two, and it's always the last part that displays first, so you'll have to roll down to the bottom to read the description.

  The series is difficult to use, because the series 1) is not always marked as series (so you can select 'plain' Record), and 2) the title contains often series of numbering (e.g. "the bodyguards (1:6)"), so even if it is marked as a series, it will record ever "Guards body (2:6)" or other titles (the Media Center will just try to record any episode of "Bodyguards (1:6)").

  It is the broadcaster who create * data, and then displays in Media Center via Broadcasting Dataservices Ltd., or who are the last to blame?

  What is MS Media Center that does not have the correct data?

  I am in Denmark, if this has an impact on the response.

  Thank you and best regards!

  Hello

  Thank you for your response. I appreciate your time.

  I suggest you to post your query on our MSDN Forums, as this issue should be better there.

  Please refer to the reference to the link below to send your request:

  http://social.msdn.Microsoft.com/forums/en-us/home

  Hope this information helps.

• Cannot save the types of collection with the correct data type (structure type)

  Hi all!
  
  I am beginner in using the Data Modeler (SQL Develeoper Version 3.0.04 build HAND - 04.34)
  
  I tried to define types of structured data type type collection.
  
  for example
  Types of structure: StruA (for example, Integer, Float) and StruB (e. g. whole, Timestamp, Double, Double)
  Types of collections: TabA should collect the types of StruA and TabB should collect the types of StruB.
  
  create or replace TYPE TabA IS TABLE OF StruA;
  create or replace TYPE TabB IS TABLE OF StruB;
  
  It is possible to select the correct data type in the 'Collection Type properties' dialog box.
  
  The data type is installed to unknown after the registration and the reopening of the design. I see that the correct type has been entered in the xml file associated with the type of collection:
  < dataTypeDescr class = "oracle.dbtools.crest.model.design.datatypes.CollectionType$ DataTypeWrapper" >
  65677BBB-FB68-963C-552D-3F98E528520B < type > < / type >
  false < isreference > < / isreference >
  < / dataTypeDescr >
  
  File name of the structured type is 65677BBB-FB68-963C-552D-3F98E528520B.xml
  
  On the display of the design or generation DDL lose again this information.
  Is - this poor handling or a bug in the Data Modeler?
  Can anyone help? THX
  Gabor
  
  Edited by: user9529349 the 26.09.2011 07:49

  Hey Gabor,

  I'm afraid that this is a bug. This problem was reported earlier in this forum, loss of definition of type of data from one type of collection

  Thank you
  David

• Created date field does not accept the correct date?

  Date Created in IPTC field... I enter 1906-01-01 and kick back... the field is now filled w / 2042-02-6.  Lightroom has said that the metadata has been recorded with the original file, but when I look at the image in Bridge (or one that is exported to LR...) I get the correct date that I entered (1906-01-01).

  How can I get Lightroom to display the Date of creation that is anchored w / in the file?

  Thank you!

  This programming bug is most likely due to the use of a 32-bit variable at a certain time, rather than a 64-bit variable.   It would be good that you posted a bug report on the new official website of feedback:

  http://feedback.Photoshop.com/photoshop_family/products/photoshop_family_photoshop_lightro om

  Details of geeks: Date / time on Windows and Mac are often represented as number of seconds more or less from a specific reference date (e.g. 2001-01-01 00:00:00 UTC).   A signed 32-bit integer can represent a total margin of 2 ^ 32 seconds, or about 136 years.   Note that the difference between the entry date (1906) and the displayed date (2042) is 136 years.   So be a date outside the range of 32-bit (1906), caused the time to boil over and wrap around 136 years (until 2042).

• The "Date added" on every song (files) has been reset to an incorrect date. Can I get the correct dates?

  MBP Retna 10.11.02 ~ iTunes 12.3.2.35

  The "Date added" on all the songs (records) have been restored to the wrong date. Is it possible to recover the correct date?

  Turingtest2 CSA user help document: empty/corrupted iTunes after upgrade/crash library - https://discussions.apple.com/docs/DOC-6561

  If you do not see your content after updating to iTunes - https://support.apple.com/kb/HT203225

  If the above methods are too extreme for you, then no, there is not any way to edit "date added" unless you reset the clock of the computer to an earlier date and add the tracks for a new library.

• Set up Thunderbird to always delete messages from the server

  I want Thunderbird to delete all messages on the server everytime I open the program and collect the messages. More specifically, when I move a message read in a folder I don't want a copy of this folder or message on the server. How one who accomplishes?

  Where is the folder to which you move the message?

  Move your messages to local folders in Thunderbird and they will be stored on your computer and deleted the folder.

  My guess is that your account is configured to use the IMAP protocol and you would be more comfortable with pop.

• Query Union returns the correct data x 2

  I have a union query that returns 2 identical lists of data. The data are correct, but I can't work on why it is duplicated. Can anyone help? Thank you.
  
  John
  ****************************
  set linesize 400
  set pagesize 9999
  NewPage Set 1
  wrap off Set
  break off Set
  Set of feedback on
  
  set the file name = CATS_TURBO_all_LiveT
  
  coil & filename
  
  Noprint today new_value DATEVAR COLUMN
  COLUMN case_id FORM 999999 TITLE 'fault '.
  COLUMN product_name FORMAT a10 HEADING 'node '.
  COLUMN priority_type_name format a4 POSITION "PRI."
  Report_date FORMAT of the COLUMN entitled date 'Date of Recvd'
  Restore_date FORMAT of the COLUMN date TOPIC "restored".
  Close_date FORMAT of the COLUMN date POSITION "closed".
  COLUMN assigned_tech_id FORMAT a10 TITLE "GENIUS".
  COLUMN status_type_name FORMAT a3 DIRECTION "FS".
  Header of COLUMN name format a4 'Type '.
  Header of COLUMN Champ_1 format a20 'Exchange '.
  COLUMN sla_name format a12 direction "platform".
  Format COLUMN header generic a4 "Gen."
  COLUMN question_text format a90 titled "Error Description".
  COLUMN note_text a90 format called 'progress '.
  
  TTITLE left 'report ' -.
  Center ' TURBO all flaws (& filename... SQL) "-"
  Jump STRAIGHT DATEVAR-
  Left ' wait > > ' jump 1
  
  Select distinct
  a.case_id "Fault."
  c.product_name
  , decode (f.priority_type_name, 'Low', '4', 'Medium', '3', 'High', '2', 'Urgent', '1') Pri
  , to_char (a.report_date, ' DD/MM/YYYY HH24') "received".
  , to_char (' a.restore_date, ' DD/MM/YYYY HH24 ")"restored ".
  , to_char (a.close_date, ' DD/MM/YYYY HH24') 'closed '.
  , decode (d.name, 'Software', from ", 'Hardware', 'H', 'Firmware', 'F', 'Unknown', 'U', 'General', 'Gen', 'Doc', 'Doc', 'n' and"No. Fault"") 'Type '.
  , decode (b.status_type_name, ' closed - resolved ', '02', 'Pending', '40', 'On Hold - waiting for approval', '41 ', 'pending', '41', 'Wait-Service restored', ' 41', 'lack of training', '44', 'Telesys survey fault', '44') FS
  g.field_1
  e.sla_name
  , decode (a.assigned_tech_id, '10', 'JSMITH', '09', 'MBROWN', '07', 'SCHATTER', '08', 'RSMEED' ', '12', ' SCHOYM') 'B '.
  , to_char (sysdate, 'DD-MON-YYYY HH24') today
  , to_char (translate (dbms_lob.substr(a.question_text,100), CHR (13) |)) CHR (10), CHR)
  question_text 32)))
  , null "Note".
  of oracledb.incident one
  oracledb.status_type b
  c oracledb.item_type
  oracledb.problem_type d
  e oracledb.sla
  oracledb.priority_type f
  oracledb.item g
  oracledb.incident_note h
  where (a.status_type_id = b.status_type_id)
  and (a.product_id = c.product_id)
  and (a.problem_type_id = d.problem_type_id)
  and (a.sla_id = e.sla_id)
  and (a.priority_type_id = f.priority_type_id)
  and (a.product_id = g.product_id)
  and e.sla_name = "TURBO PÉI"
  and g.field_1 not in the (' SysCntl-1', ' SysCntl-2', "TURBO PÉI" "")
  and a.case_id = h.case_id (+)
  and not exists (select case_id from k oracledb.incident_note where k.case_id = a.case_id)
  and a.deleted <>' 1'
  Union
  Select distinct
  a.case_id "Fault."
  c.product_name
  , decode (f.priority_type_name, 'Low', '4', 'Medium', '3', 'High', '2', 'Urgent', '1') Pri
  , to_char (a.report_date, ' DD/MM/YYYY HH24') "received".
  , to_char (' a.restore_date, ' DD/MM/YYYY HH24 ")"restored ".
  , to_char (a.close_date, ' DD/MM/YYYY HH24') 'closed '.
  , decode (d.name, 'Software', from ", 'Hardware', 'H', 'Firmware', 'F', 'Unknown', 'U', 'General', 'Gen', 'Doc', 'Doc', 'n' and"No. Fault"") 'Type '.
  , decode (b.status_type_name, ' closed - resolved ', '02', 'Pending', '40', 'On Hold - waiting for approval', '41 ', 'pending', '41', 'Wait-Service restored', ' 41', 'lack of training', '44', 'Telesys survey fault', '44') FS
  g.field_1
  e.sla_name
  , decode (a.assigned_tech_id, '10', 'JSMITH', '09', 'MBROWN', '07', 'SCHATTER', '08', 'RSMEED' ', '12', ' SCHOYM') 'B '.
  , to_char (sysdate, 'DD-MON-YYYY HH24') today
  , to_char (translate (dbms_lob.substr(a.question_text,100), CHR (13) |)) Chr (10), Chr (32))) question_text
  , to_char (translate (dbms_lob.substr(h.note_text,100), CHR (13) |)) Chr (10), Chr (32))) note_text
  of oracledb.incident one
  oracledb.status_type b
  c oracledb.item_type
  oracledb.problem_type d
  e oracledb.sla
  oracledb.priority_type f
  oracledb.item g
  oracledb.incident_note h
  where (a.status_type_id = b.status_type_id)
  and (a.product_id = c.product_id)
  and (a.problem_type_id = d.problem_type_id)
  and (a.sla_id = e.sla_id)
  and (a.priority_type_id = f.priority_type_id)
  and (a.product_id = g.product_id)
  and e.sla_name = "TURBO PÉI"
  and g.field_1 not in the (' SysCntl-1', ' SysCntl-2', "TURBO PÉI" "")
  and a.case_id = h.case_id
  and h.note_id = (select max (i.note_id)
  oracledb.incident_note I have
  where a.case_id = i.case_id)
  and a.deleted <>' 1'
  order by 1;
  /
  SPOOL OFF
  Clear jump
  output
  
  Published by: user13388553 on 11/24/2010 14:59

  If your code is that you run in the production data splits because you're runnign queries twice.

  from oracledb.incident_note i
  where a.case_id = i.case_id)
  and a.deleted '1'
  order by 1;
  /
  SPOOL OFF
  

  The semicolon after that command by 1 causes the statement to be executed, the slash on the next line causes the reexecute being. Delete one of them.

  John

• Thunderbird displays only the text in the messages received or sent, even if the options are set for the HTML pages.

  Using Thunderbird 25.6.0, running on W7 - 64-bit.
  Have used the T-bird constantly since it was morph'ed from Netscape Communicator, so feel I understand basis, including the specification HTML or text/HTML options.

  A user Windows, Thunderbird account works perfectly, for the second user of Windows, all Thunderbird email accounts (4-a profile of T-bird) suddenly transformed to send and receive all messages in text only.

  I regularly compose messages in HTML format, using the wide range of fonts, colors, embedded graphics. The compositions remain intact (HTML) until the moment where I send them. The copy in my "sent" folder is in the text; one of the graphics incorporated in my original will be attached, and all the others will be gone. If my recipient respond or forward the message to me, all of my original material is text, as well as all my recipient adds to his response.

  In addition, all original incoming messages of my correspondents are in simple text. Not a sign of HTML anywhere unless I have to compose a message, or a message saved in my drafts folder.

  What is the problem and how can I solve this problem?

  Dean Jones

  NO, I ask a question. I was NOT choosing my question as a solution to my question.

  Usually, when I start new topics, I am taken in part because it's something twice 6 months ago.

  I have no solution. I have a problem. I'll start a new topic

• Check spelling Thunderbird displays in the form of words of errors that are not in the draft text mail.

  I'm running Thunderbird 24.5.0 on a system Windows 8.1 (both newly installed). According to Windows / Microsoft Update updates only in circulation are both updates optional (for Silverlight and Bing Office, nor who have or want to).

  Today I prepared a letter of project, that has been saved in the subfolder 'Project' of 'local folders '. After further review and editing, I pressed the "Send" button to send the e-mail message. As expected, the window "Check spelling" popped up and said problems with a few words, who were treated by variously by adding them to the dictionary, fix or ignore the. When it reaches the end of the text, however, the spelling continued to draw words hat, presenting more than thirty extra "mistakes".

  If this is of any help, these words seem to be 'technical' nature, which suggests that the spelling might have gotten in the part of the document or the system where it shouldn't be. Include "charset", "mso" (multiple instances), 'msoNormal', 'msoChpDefault', 'WordSection', 'qformat', 'ANSI' and 'bidi '.

  I might add that at the beginning of my Thunderbird request and in particular the structure and the content of the 'Local folders' hierarchy, have been determined by the content of a profile file created on my old Windows XP system via an import in Outlook Express, which was in turn copied everywhere in my new machine. The project email which is the subject of this question was however prepared entirely on the new system.

  Thanks for your input, Matt.

  I entered all the text in the first box above. It was intended to provide an accurate description, with specific examples, the problem I had.

  However, further investigation, stated that the problem only occurred when the original text was seized by an account. As a result, I just found out the signature html for this account file was damaged and contained a lot of invisible extra hardware, which the text identified by the spell check.

  Recreate a clean version of the signature for the account file solved the problem.

• Invalid certificate, the page displays past date, CERT. is the correct date.

  This is the message I get:

  "login.yahoo.com uses an invalid security certificate. The certificate will be more valid until 02/03/2014 18:00. "The time now is 17:09 07/02/2014 (error code: sec_error_expired_certificate).

  The problem is that (the date I wrote that) is today 07/03/2014. The specified time is accurate, but the date is one month old. I checked the time on my computer and router and both are accurate. Is there another place where Firefox gets its timestamp? I do not understand why the date used for the certificate would be turned off by a whole month. This problem appeared on the 04/03/2014.

  Firefox still seems to think that the date is wrong, if the current time is 17:09 07/02/2014.

  You can see the time and the time zone if you paste this code in the line of command of the Web Console (Web Developer > Web Console;) CTRL + SHIFT + K)

  • console.log ((nouvelle_Date).toLocaleString ()); Use it to get your current time zone time

• To display long the field data type

  Hello
  
  can any1 help me showing the column with the data type long. The version of oracle's 10g.
  
  
  concerning
  Chaitanya

  Set the maximum width (in chars) for displaying and copying LONG values.
  

• Product search results are not displayed in the correct style

  Could someone shed some light on why when I add the results in a web page the results are there, but they are not styled as they are in the shop?

  Simple patterns are in fashion catalogue 'boutique', your product list is

  (1) using the small_product.html model, and

  (2) very probably wrapped with

  And search results are:
  (1) possibly using the model of provision small_product_backup.html
  (2) very probably wrapped with a table or other markup

  Liam said, many reasons. Give us more details about your scenario.