Thunderbird starts by does not respond after the update to version 38

Similar Questions

• Firefox does not open after the update. Cannot open the profile technical, even when you use the directory in cmd line path

  I'm using Firefox on a Windows 7 computer. Firefox does not open after the last update. I read the help articles and it seems that I need to create a new profile because my settings were probably corrupted. I'm unable to open the profile technical, even when you use the directory in cmd line path. I tried the following commands in the command line:

  Firefox Pei
  "C:\Program Files (x 86) \Mozilla" PEI

  Nothing happens with every order.

  I am also running Norton Internet Security. I read a help of virtual navigation features Re article that can cause a problem. The article says to check the setting of virtualization in the internet security software and to clear the virtual cache. I went through all the menus of settings in Norton Internet Security version 21.6.0.32 and I don't see anything that looked like in "virtualization" settings, so I guess that does not apply to me. "

  If you have any ideas, I had appreaciate that your expertise!

  Hello arcandl, at the launch of the firefox is not after you double-click the shortcut, it is sometimes also a sign of active malware on a system.
  you might want to try running a scan with some various other security like the free version of malwarebytes and adwcleaner tools that are specialized to remove the adware and browser hijackers.

  Fix Firefox problems caused by malicious software

• RDP does not work after the update of the virtual machine tool

  There are many machines these RDP does not work after last update VM tool.

  Hello

  Please replace RDP linked DLL file from any server to work from the same version of the OS...

• G6 2312ax Pavilion: Pavilion g6 2312ax keyboard does not respond after the death of hard drive

  My laptop received disc hard failure two months and he died since then. I intend to change the hard drive of the laptop as soon as the order arrives in a few days. But now the problem is that as if now the keyboard of my laptop does not respond. So I would like to know if this problem will be resolved after the replacement of hard disk or is related to the software / operating system of your laptop?

  Help, please...

  Sorry I couldn't answer yesterday.

  The update, is that when I tried to turn on the laptop as well by pressing the ESC. The laptop did not respond initially but then responded in the end, but after that, there is no answer.

  Now Mr. President, I would like to know your end on this issue?

  Thank you

• bridge to aid does not respond after the effect presets

  Bridge stops responding when you try to use or to get an overview after effect presets. The application never gives me the error "not responded" but but does not not in stocks. It could be because the computer is old?

  MAC

  10.11.4

  3.2 ghz intel core i3

  12 GB of ram

  ATI radeon HD 5670

  Measures taken

  Destroyed bridge preferences.

  Uninstalled the application > Reinstalled

  Thoughts?

  This has been resolved with the new Update 2015 bridge

  

• Computer does not restart after the update

  Description of the problem: I am unable to restart my laptop after receiving the update of microsoft onSaturday.  I have a gateway MT6707.

  I got the following error. "Unable to start Windows.  A recent hardware or software change might be the cause.

  If windows files have been damaged or misconfigured, Startup Repair can help diagnose and fix the problem.  If the power was interrupted during startup, choose start windows normally. »

  Start the reboot system (recommended)
  Start Normal Windows

  No matter which option I choose, the system attempts to restart and takes me right back to this screen above information.

  No other changes have been made to the other than the update.

  Please let me know how to proceed.
  Operating system: Windows Vista

  Follow these steps to try to solve your problems of boot.

   

  Restore point:

  http://www.howtogeek.com/HOWTO/Windows-Vista/using-Windows-Vista-system-restore/

  Do Safe Mode system restore, if it is impossible to do in Normal Mode.

  Try typing F8 at startup and in the list of Boot selections, select Mode safe using ARROW top to go there > and then press ENTER.

  Try a restore of the system once, to choose a Restore Point prior to your problem...

  Click Start > programs > Accessories > system tools > system restore > choose another time > next > etc.

  http://www.windowsvistauserguide.com/system_restore.htm

  Read the above for a very good graph shows how backward more than 5 days in the System Restore Points by checking the correct box.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

   

  If the system or Mode restore safe work not and you do not have a Microsoft Vista DVD, make a repair disc to do a Startup Repair:

  Download the ISO on the link provided and make a record of repair time it starts.

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu.

  When you have changed that, insert the Bootable disk you did in the drive and reboot.

  http://www.bleepingcomputer.com/tutorials/tutorial148.html

  Link above shows what the process looks like and a manual, it load the repair options.

  NeoSmart containing the content of the Windows Vista DVD 'Recovery Centre', as we refer to him. It cannot be used to install or reinstall Windows Vista, and is just a Windows PE interface to recovering your PC. Technically, we could re-create this installation with downloadable media media freely from Microsoft (namely the Microsoft WAIK, several gigabyte download); but it is pretty darn decent of Microsoft to present Windows users who might not be able to create such a thing on their own.

  Read all the info on the website on how to create and use:

  http://NeoSmart.net/blog/2008/Windows-Vista-recovery-disc-download/

  ISO Burner:http://www.snapfiles.com/get/active-isoburner.html

  It's a very good Vista startup repair disk.

  You can do a system restart tool, system, etc it restore.

  It is NOT a disc of resettlement.

  And the 32-bit is what normally comes on a computer, unless 64-bit.

  ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

  If the above does not resolve the problem:

  Windows Update Forum:

  You will get the best help for any problem of Update/Service Pack in the Windows Update Forum; the link below:

  http://social.answers.Microsoft.com/forums/en-us/vistawu/threads

  When you repost here, kindly include the Error Codes, and exactly what is happening when you try to update.

  In this way, you will receive the best help.

  See you soon.

  Mick Murphy - Microsoft partner

• normal flash camera does not work after the update of Marshmallow to lenovo turned vibe

  after update of lenovo vibe turned 6.0 when open fash normal camera does not work and I can't do it open or closed or outomatic is disable

  but when open video camera flash is working and also with any another application to camera is working normally

  How can fix this?

  reset the camera settings after Flash open ligt

• Windows 7 does not open after the updates installed

  Help, please. Computer my son makes the automatic updates today and now it does not start. It takes me to the blue Windows screen then appears a box that says "System Recovery Options". It has two options

  Recovery tools 1-use by choosing an operating system (no present in the box). I tried this one and it did not work.

  2. restore your computer using a system image, which does not either even though I know he created images of system. Please any information would be greatly appreciated.

  Once I try these options from the dialog box get, with startup repair, System Restore, system image recovery, Windows memory Diagnostic and invites but not these wil do anything either.

  What can I do so that he could start over again what can I remove updates?

  Hello

  Disable automatic restart your computer and check if there are errors displayed when the computer does not start. To disable automatic reboot follow the link below.

  http://Windows.Microsoft.com/en-us/Windows7/advanced-startup-options-including-safe-mode

  Try the steps suggested by David Y post dated November 2, 2010 in the link given below and check if that helps.

  http://social.answers.Microsoft.com/forums/en-us/w7repair/thread/a6071159-db22-4076-b5d8-31f446dbdf32

  Hope this information is useful.

  Amrita M

  Microsoft Answers Support Engineer
  Visit our Microsoft answers feedback Forum and let us know what you think.

• Customer CC does not open after the update/installation

  Hello

  I tried to upgrade to the latest version of the CC customer, but when I try to open it after installing it does not open and only told me (in German) "the program is not open.

  Furthermore, I'm not able to open any other application such as bridge/Photoshop and Lightroom cloud without getting "Error 16".

  I tried several steps to find the flaw, but for example, there is no log file to find an error; I tried to install with firewall/antivirus off but the same message popped up. I also changed the access privileges, but the result was the same.

  I couldn't uninstall Adobe CC, because a message told me I still have other applications on my system.

  I didn't uninstall my programs before consulting this forum - there you have an idea?

  I'm on Mac.

  Thank you very much

  Thanks for your help - I'll make one last try or contact support technique adobe Monday.

  I found this thread 16 error while using applications of the suite Adobe CC 2015...

  and finally, it worked!

• Why by default fonts and color does not work after the upgrade to version 31?

  As mentioned on, my default fonts does not work. Any type of police that I've changed, he always showed the times I think that a new font Roman.
  pls help me thanks

  Problem solved. The character encoding for the outgoing is false, I change to the West. Then its ok now

• HP pavilion ab027tx 15: Equalizer b & o does not properly after the update of windows 10

  I've updated to windows 10. .and I have installed the latest driver realtek audio on my laptop from the HP website.

  The B & play 0 appears in the control panel and list of icons. But I am not able to change the mode(music/voice/movie) in the room B & O when you listen to music and watch YouTube etc .i have reinstalled the driver realtek audio, but the same problem appears. Please tell the solution for this problem

  It does not work when I use my headset

  Hi there @pavan_014.

  Thank you for visiting the Forums HP's Support and welcome! I think the problem you are having is your sound and headphones since the Windows 10 upgrade.

  Note Remove all USB devices. Disconnect all devices of non-essential, as these can cause some problems.

  Although you had already uploaded/updated new drivers, I would suggest trying to uninstall all the drivers of its current:

  • Go to the Device Manager
  • Click sound, video and game controllers
  • Right-click on the audio driver
  • Click on uninstall
  • Restart your computer laptop twice
  • Try the speakers

  You can use the HP Support Assistant's drivers. Here is a link to the HP Support Assistant, if you need it. Simply download and run the application and it will help with the software and drivers on your system that need updated for Windows 10.

  Are - what you happened to try the audio Troubleshooter? It might be able to solve your problem automatically.

  You can find the great troubleshooting steps in document No. sound from speakers as well as resolution of the headphones and headset problems. This document contains several troubleshooting steps that may prove useful.

  Please follow provided the troubleshooting steps, re-post and let me know the detailed results of the troubleshooting.

  Thank you!

  Have a great day!

• My Wifi does not work after the update of the software.

  I've updated my wifi "Qualcomm Atheros 802.11b/g/n WiFi Adapter QCA9565" and now my wifi is dead, his does not. I need help.

  Hello

  Roll back driver can help. Please try

  Start > Control Panel > Device Manager > network adapters

  Right click > properties > Driver

  Select "roll back driver".

  Good luck.

• Approvals of auto Service does not work after the Update Rollup 2.3 HRMS on Oracle11i

  Custom approval workflow for self-service has stopped working and is auto approving after HRMS update rollup 2 and 2 on Oracle 11i. Can someone advice on what may be the cause of this problem.

  Hello

  You have customized by changes in oracle seeded workflows and not to change his name. If Yes, then it is not supported patches way and oracle are quite capacble of replace your coustomization.

  Oracle provides a way for the customization, serach metalink support and find out how to do it.

  You can get the list of object crushed by the patch by OAM or by running the fix in test mode.

  If you have backup of these workflows, you can replace it.

  Thank you
  JD

• Photoshop CC 2015 does not open after the update

  Yesterday, I've updated to the latest version of PS CC 2015. On my laptop (Macbook Pro 15 "") it updated with no problems. When I arrived home, I've updated on my iMac (21.5 '') and at startup (loading screen), when she reached the part where it loads the plugins he said: "the operation could not be completed.

  Already tried to uninstall PS, reboot, and reinstall, and hold features key appropriate to load PS without preferences or plugins, yet none of those who worked. I spent all last night looking through this forum and others to find the solution and found nothing.

  Please help, I need PS to work to get the work done.

  I corrected myself. I deleted the folders SLStore and SLCache and restarted my computer and the update worked fine. You can close this topic.

• My Photoshop/Illustrator does not work after the update!

  After the 2015 updated today. I open Photoshop and it will appear a screen

  Same thing happens with Adobe Illustrator.

  I am currently using Window 7 64 bit

  My computer is fast, and I use Photoshop every day. Help, please.

  reset your preferences:

  Acrobat: http://help.adobe.com/en_US/acrobat/X/pro/using/WS58a04a822e3e50102bd615109794195ff-7feb.w .html

  Dreamweaver: http://helpx.adobe.com/dreamweaver/kb/restore-preferences-dreamweaver-cs4-cs5.html

  Flash: http://helpx.adobe.com/flash/kb/re-create-preferences-flash-professional.html

  Illustrator: https://helpx.adobe.com/illustrator/using/setting-preferences.html

  InDesign: https://forums.adobe.com/thread/526990

  Lightroom: http://www.lightroomforums.net/showthread.php?14226-Resetting-%28or-Trashing-%29-the-Light file-Preferences-room

  Photoshop: https://forums.adobe.com/thread/375776

  Photoshop elements: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html

  elements of first: https://helpx.adobe.com/photoshop-elements/kb/preference-file-locations-photoshop-elements .html

  First pro: https://helpx.adobe.com/premiere-pro/using/preferences.html