Thunderbird updated, now will not be opened except in safe mode.

Similar Questions

• Firefox crashes on opening a few seconds. has all of a sudden started several weeks ago and I have not been able to get since. I reinstalled but update did not work. It will not be open even in safe mode. Help!

  Firefox crashes on opening a few seconds. That started everything suddenly a few weeks ago, and despite several attempts to every day, I still cannot load firefox application. It crashes immediately on startup every time anything and journalist accident happens. I studied all the articles and followed their suggestions. I installed the latest version of firefox and still get the same results. I can't even open firefox in safe mode.

  Heather, not sure I can help, I'm not a Mac user, but I'll have a look at the crashIDs that you provided.

  Update:

  • Crash report ID: [6326058f-1fca-4d4d-a080-af8902120119]
    • signature: TFont::CreateFontEntitiesForFile (const char *, bool, TSimpleArray < TFont * > &, bool, short, char const *)
  • Crash report ID: [69534b6f-7662-4c09-bf2e-39fff2120104] signature as above

  There are very few reports recent crash with this signature, they could even be your plant. If you follow the suggestions in the article I linked above there is not much that can be done easily. You should try discount the possibility that the cause is malware by scanning with several updated tools.

  Malware controls
  Have you seen and followed the advice

  • Fix Firefox problems caused by malicious software
  • the first step trying to detect malware, a typical suggestion is this message from the-edmeister /questions/914980 #answer - 302372

  Clean reinstall it
  If you find no malware, it can be interesting to try a new re - install and a clean profile, none of them are simple and must be done with care, so first try malware scans, those who will take a while to sort.

  Rather a last resort: fill out a bug report
  
  If you are ready to try to answer the inevitable questions and have an email account anonymous, that you can use for recording, you can follow the link from the report above and click on 'report' to create a bug report on the crash.

• I was not able to get on firefox for weeks! It crashes on opening a few seconds. I reinstalled hoping to be updated, but that has not worked. It will not be open even in safe mode. I'm desperate...

  all of a sudden a few weeks ago, I can't have on firefox. It crashes immediately on startup every time anything and journalist accident happens. I studied all the articles and followed their suggestions. I installed the latest version of firefox and still get the same results. I can't even open firefox in safe mode. I don't ' know what else to try and really need my favorite browser back and all my favorites and passwords...

  Since I exhausted all angles throughout January and early February, I can't really identify what makes the difference, but today... IT WORKS NOW! Firefox has been removed from my computer for a few weeks now, so with renewed determination I searched all single folder on my entire hard drive and found 3 random files with mozilla or any part of the word inside mozilla and erased. I turned off the computer and restarted a few hours later. I downloaded firefox 10 (still higher version than the one I was updating of a month) from google chrome and installed it. so thank you for your comments and help!

• Consumer ir device does not not on HP laptop and windows that do not open except in safe mode

  I had problems since late April and early May.  I have a high tower of HP Pavilion dv6.  When you try to start, the computer will show the Windows logo then a disappearance back quick page, then to the boot in safe mode prompt. I deleted everything that has been added since April with the exception of ITunes. I did a search of system and found that the infrared device consumer does not work.  I read a few posts, but do not seem to be able to try the suggestions around turning off windows system updates since the trouble began.  Is my only option the total system restore?  How can I get that since nothing came with the computer?

  Hello

  Thank you for the reply back, I suggest that you contact HP support and answer if the problem is solved and please do not hesitate to answer, in the case where you are facing in the future other problems with Windows.

• I have XP and had a virus. I removed the virus, but now the system restore will not work. I tried Safe Mode but clings to the confirm restore point selection. Help

  System Restore will not work

  Hi FriendFriend,

  1. did you of recent changes on the computer?

  2. do you have security software installed on the computer?

  3. you receive an error message when running the system restore?

  I suggest that you put the computer in a clean boot state, and then try to clean boot.

  It is possible that some third-party programs installed on the computer is causing the problem.

  To help resolve the error and other messages, you can start Windows XP by using a minimal set of drivers and startup programs. This type of boot is known as a "clean boot". A clean boot helps eliminate software conflicts.

  See the link below to learn more about how to clean boot.

  How to configure Windows XP to start in a "clean boot" State

  http://support.Microsoft.com/kb/310353

  Reset the computer to start as usual

  When you are finished troubleshooting, follow these steps to reset the computer to start as usual:

  (a) click Start, type msconfig in the search box and press ENTER.

  (b) If you are prompted for an administrator password or for confirmation, type your password or click on continue.

  (c) under the general tab, click the Normal startup option, and then click OK.

  (d) when you are prompted to restart the computer, click on restart.

  If the previous step fails, then view the event logs to examine the system restore service errors.

  (a) click Start, click run, type eventvwr.msc/s in the Open box, and then press ENTER.

  (b) click on the category System .

  (c) click the Source tab to sort by name, and then look for "sr" or "srservice." Double-click each of these services and then evaluate the event description for any indication of the cause of the problem.

  Steps of troubleshooting for problems when you try to use the System Restore tool in Windows XP

  http://support.Microsoft.com/kb/302796

  Procedure to view and manage event logs in Event Viewer in Windows XP

  http://support.Microsoft.com/kb/308427

• I dropped my laptop and now windows starts too slowly or not at all, except in safe mode.

  Hi people out there

  I dropped my phone a few days ago and now Windows, when started normally, goes ridiculously slow and then stops before he installed the sidebar.

  It still works in safe mode with networking and the other.  Then one of my friends suggested I just get my vista disk and re-install/repair windows.  However, I am currently in Poland, and my drive is in Scotland.  Is there a way I can solve these problems with my windows?  Can I borrow a disc from a friend?  I am really attached to money at the moment then, really, to take it to a store is very much a last resort.

  Can anyone offer some (very basic please) advice on what to do?

  Thank you

  Cardno85

  You can also have problems of material thanks to a fall!

  See if you have a recovery Partition on your computer/laptop to restore it to factory settings.

  See if a manual provided with the computer or go to the manufacturer's website, email or you can call for information on how to make a recovery.

  Normally, you have to press F10 or F11 at startup to start the recovery process...

  Another way I've seen on some models is press F8 and go to a list of startup options, and launch a recovery of standards of plant with it, by selecting the repair option.

  Or borrow a good Microsoft Vista DVD (not Dell, HP, etc).
  A good Vista DVD contains all versions of Vista.
  The product key determines which version of Vista is installed.

  There are 2 disks of Vista: one for 32-bit operating system, and one for 64-bit operating system.

  If install a cleaning is required with a good DVD of Vista (not HP, Dell recovery disks):

  Go to your Bios/Setup, or the Boot Menu at startup and change the Boot order to make the DVD/CD drive 1st in the boot order, then reboot with the disk in the drive.

  At the startup/power on you should see at the bottom of the screen either F2 or DELETE, go to Setup/Bios or F12 for the Boot Menu

  http://support.Microsoft.com/default.aspx/KB/918884

  MS advice on the conduct of clean install.

  http://www.theeldergeekvista.com/vista_clean_installation.htm

  A tutorial on the use of a clean install

  http://www.winsupersite.com/showcase/winvista_install_03.asp

  Super Guide Windows Vista Installation

  After installation > go to the website of the manufacturer of your computer/notebook > drivers and downloads Section > key in your model number > get latest Vista drivers for it > download/install them.

  Save all data, because it will be lost during a clean installation.

  See you soon.

  Mick Murphy - Microsoft partner

• RAM installed on the Vista PC, Vista will not start, but switches to Safe Mode?

  I work on computers for years on the side and have done my fair share of upgrades of RAM. I went to my boss to Jeanne to update its ram, it has a Vista computer ~ 4 years with 512 MB of RAM, (a stick). I upgraded to 2 GB. There are 2 white and 2 black slots. The 512 was the white slot. I have it pulled and replaced with 2 GB then put the 512 in the dark. It starts and went to the vista loading bar, then the screen went black. Waited a while and put the 512 where he was and then added 2 GB sequentially. Same result. Then I tried the double approach channel. I also tried just the new RAM. Same result. I EVEN tried to put just the an old back in its slot and it STILL would not initialize correctly.

  Here's the interesting thing. Safe mode and safe mode with networking mode both start instantly. No problems. Properties system shows 2 gb, rebooted and went into the CMOS and recognizes all the correct RAM in the correct locations.

  Now, it should have been a simple exchange and pop so I don't have the computer with me, any suggestions?

  I followed the other suggestions and nothing worked, including pulling the battery for 15 seconds.

  It is a Dell Dimension E521. I have triple checked the RAM before I bought it.

  When I arrived, he had already the computer is off, so I just open it without putting work first. In fact, I ordered the computer home, on this computer on Wednesday of last week. The computer is very slow, but worked

  Apparently you do not see where I said I have triple checked the RAM before I bought it. in any case, after 5 hours of trial and error, I was able to make it work

• Our Toshiba Inspiron will not start windows, even in safe mode. Help, please!

  After the updates of this week, the system will not load anything.

  Hi Juliet,

  Thanks for asking the question in the Microsoft Community forum.

  From your description, I understand that after Windows Update, you can not load Windows.

  To better understand the question, please answer the following questions:

  1. What is the version of the Windows operating system that is installed on your computer?

  Reference: http://windows.microsoft.com/is-IS/windows7/help/which-version-of-the-windows-operating-system-am-i-running

  2. what happens when you try to load the system? You receive an error message?

  3. what application or anti-virus security suite is installed on your computer?

  4. you remember after installation of update, you are facing this problem?

  Remove any external device connected to the computer without keyboard and mouse and then perform the methods.

  If you are using Windows 7 and Windows Vista, follow the mentioned methods:

  Method 1:

   

  If the computer does not start in safe mode, perform the last known good Configuration.

  Reference: http://Windows.Microsoft.com/en-us/Windows7/using-last-known-good-configuration

  Note: Link above also applies to Windows Vista.

  Question remains always use same method 2.

   

  Method 2:

   

  Try to perform the Startup Repair and check.

  http://Windows.Microsoft.com/en-us/Windows7/products/features/Startup-Repair

  If you are using Windows XP, follow the mentioned methods:

  Method 1:

  Perform the last known good configuration.

  http://support.Microsoft.com/kb/307852

  Method 2:

  How to fix a computer that does not start

  http://Windows.Microsoft.com/en-us/Windows-XP/help/Setup/how-to-fix-computer-that-will-not-start

  Hope the above information is useful, if you have any question back to us, we are happy to help you.

  Thank you.

• Laptop does not do anything except in safe mode!

  My laptop has something wrong with it. It allows me to open some things, but when it comes to the final click it wont run anything, I just get the mouse icon timer! All my security is disabled and I can't go online. The only way I can do anything is in safe mode. I checked what has updated the day it broke, and there was an update to Microsoft Office 2003, which is odd, because we have office 2007.

  Help, please!

  Safe mode, see if you can isolate advancing the cause of your problem.

  310560 How to troubleshoot by using the Msconfig utility in Windows XP
  http://support.Microsoft.com/kb/310560

  How to troubleshoot a problem by performing a clean boot in Windows Vista
  http://support.Microsoft.com/default.aspx/KB/929135

  It is more than likely that you have picked up some nasty malware.  See if you can download (or have a friend download) and run one of these safe mode.

  Malwarebytes' Anti-Malware
  http://www.Malwarebytes.org/MBAM.php

  SuperAntispyware
  http://SUPERAntiSpyware.com/

  You could try Safe Mode system restore.

  How to repair the operating system and how to restore the configuration of the operating system to an earlier point in time in Windows Vista
  http://support.Microsoft.com/kb/936212/#appliesTo

  What is the number of KB and descriptive title of this update "strange"?

• Thus, after the most recent update, Skype will not be open to all

  I tried everything, but I can not Skype to open as much as now that I put it to date. Is it possible to fix this? I tried to uninstall and reinstall but hit the wall even.

  Try to update your Skype to the currently latest version of 7.29.0.102 :

  http://www.Skype.com/go/getskype-full

• Driver HP update, now will not print black ink

  Yesterday I updated the driver and now, no black print. Change cartridges. Cleaned printer heads. Turned, then turn it on again. Does not work in the project or better. All other colors are OK... advice? I would go back to the old driver, but don't know how.

  I'm on iMac, OSX 10.8.2

  printer Officejet 6500 E709n

  Hello

  Please print a report of automatic test equipment:

  http://support.HP.com/us-en/document/c01851104

  You see black ink printed correctly on this page?

• Help, I have a problem with the PS and CC - I get and error measure in PS - "this program cannot start because ONCoreFoundation8.dll - is missing... and it crashes, and now creative cloud will not be open to all."  I spent more than 2 hours to speak to so

  Help, I have a problem with the PS and CC - I get and error measure in PS - "this program cannot start because ONCoreFoundation8.dll - is missing... and it crashes, and now creative cloud will not be open to all."  I spent more than 2 hours to speak to someone in tech support that I did not understand, and I don't know what to do next. The tech gal was run, but once she hung up he returned to broken.  I have an idea, but that's just a guess - trouble started about the time I tried to open On1 of ps there has been a perfect icon effects 9 (for some reason, they decided to add the icon when I got it - I have 8) I clicked it and it loaded the update and then asked me if I wanted to try or buy - that's when I realized that I should have clicked on 8 and tried of back , but is either too late - I think, maybe this dll. 8 or 9 in with perfect On1 effects - and it has changed my settings in PS - and is the reason why it is not compatible - ideas? I have a pc with window7-Carol

  Try to run Photoshop without loading third-party plug-in. hold SHIFT keys when you start Photoshop.  The missing module is not Adobe software.

• Updated the macbook pro of el capitan and now will not start. Instead, I get the error message "your computer restarted due to a problem". Someone at - it suggestions on how to solve this problem?

  Updated macbook pro today for the latest version of el capitan and now will not start. Instead, I get the error message "your computer restarted due to a problem". Someone at - it suggestions on how to solve this problem?

  It would be helpful to post what the screen says.

  -Try to reset memory NVRAM/PRAM and SMC

  MacIntel: Reset of the controller (SMC) system management

  https://support.Apple.com/en-us/HT201295

  Subject of memory NVRAM and PRAM

  https://support.Apple.com/en-us/HT204063

  -Try to start safe mode

  OS x: what is Safe Boot, Safe Mode?

  https://support.Apple.com/en-us/HT201262

  -Start to recovery and repair the startup disk

  OS X: on OS X Recovery - Apple Support

  https://support.Apple.com/en-us/HT201314

  -If it is repairable reinstall the OSX

  How to reinstall OS X on your Mac - Apple Support

  https://support.Apple.com/en-us/HT204904

  -If you do not have a backup using disk utility to restore the internal drive to an external drive, so that you can try to recover the data.

• Update Windows xp caused my computer blue screen and now will not start.

  Update Windows xp caused my computer blue screen and now will not start.  There has been no change to my system hardware or software otherwise.  After that windows update Setup, he asked to restart the computer.  When restarted, the computer screens and past blue to the quick menu for safe mode and last known configuration to work.  None of these mode of work, not to shelter or otherwise.  The only thing that he will now implementing market is quickly flashing the blue screen and restart once again to this quick menu.

  It's really annoying because I have important files on this computer work and can't afford to get in shape!   I put my confidence in using windows and keep it updated.   During the installation of your updates, it made my system fails and does not restart.   I'll be very upset if this update of windows xp causes me to have to reformat and lose important files!

  Any advice on a solution?   I need to get this computer work as soon as POSSIBLE.

  Ben River

  I ordered the Dell XP disc and did the re-install. It works fine now. The Dell technical support had me do some updates on the web as well. I have not had problems since. What happened with the automatic updates completely wiped out my operating system. At least I don't have to buy a new computer.

  If nothing else works, try reinstalling your operating system. It worked for me.

• Photoshop 2015.5. PS does not update and will not open. Missing 4 dll files.

  Photoshop CC (2015.5). PS does not update and will not open. Missing 4 dll files.

  VulcanControl, VulcanMessage5, tbb and ScCore. PS worked fine earlier today and has worked great for over a year.

  Windows 7 update to 10 eight months ago.

  Exit code: 184

  -------------------------------------- Summary --------------------------------------

  -fatal error 2, 0 error (s), 1 warning (s)

  FATAL: Error (Code = 184) running the 'MoveFileCommand' command for package: 'AdobePhotoshop17-Core_x64', version: 17.0.1.159

  FATAL: An error has occurred in the installation of the package (name: AdobePhotoshop17-Core_x64 Version: 17.0.1.159). Error code: "184".

  WARN: Cannot move the card to the address 'C:\adobeTemp\ETRD35C.tmp\1\Application\Required\DynamicLinkMediaServer\32\libmmd.dll' to 'C:\Program Files\Adobe\Adobe Photoshop CC 2015.5\Required\DynamicLinkMediaServer\32\libmmd.dll' error 32 the process cannot access the file because it is being used by another process... Try setting the correct permissions for the specified file/folder or parent, so that the admin has the right to modify.

  Hey gene,.

  Thanks for getting back to me. I uninstalled and re-installed PS and everything seems to work very well. Put same Lightroom update. Not sure what the problem was.

  Thank you

  Clay