Thunderbolt Display 27-inch TV using the HDMI port Minidisplay

Similar Questions

• I'm trying to connect two monitors and one using the hdmi port and the other vga. How can I get the pc to recognize the two?

  Original title: multiple monitors

  I'm trying to connect two monitors and one using the hdmi port and the other vga. How can I get the pc to recognize the two?

  Hi David,

  Thanks for posting your query on the Microsoft Community.

  I suggest you refer to the Microsoft Help Articles below and try the steps mentioned.

  Check out the link:

  http://Windows.Microsoft.com/en-in/Windows-8/how-connect-multiple-monitors#1TC=T1

  You can also check:

  http://Windows.Microsoft.com/en-in/Windows-8/get-best-display-monitor

  Hope this information helps. Please let us know if you need any other help with Windows in the future. We will be happy to help you.

• Satellite A300 - using the HDMI port as an input

  Hello

  Currently user of a Satellite A300-1OT, I would like to know if there is a way to use the HDMI port as a port of entry, in order to connect my blue-ray on my computer drive

  THX
  Ludo

  Hello

  The HDMI port is a video output port!
  It sends video and audio signals and doesn't receive signals

  Simply said; No, that's not possible

  Good bye

• Can I use my Switch SW3-013-1566 as a monitor of the camera using the HDMI port?

  I did research on this scenario but see no mention of the possibility of using my Acer

  SW3-013-1566 tablet as a digital monitor for my Canon 7 d DSLR camera. If anyone knows how this can be done please let me know and which downloadable programs I could use.

  Thank you

  Well, according to this video , you can. You use the USB connection and software from Canon. You wouldn't be able with the HDMI port without any other additional hardware to do the video cpture.

• 32BV500B - blurry text using the HDMI and PC connection

  Hello

  I currently use the 32BV500B as HDMI PC monitor.
  I would rename the entry 'PC' to allow the TV HDMI mode "pc" to correct a blurred text.
  I don't see any option to do this, use the menu system.

  Otherwise, how can I turn on the TV in the mode "PC"?

  I can confirm that I tried different HDMI cables and the blurry text only occurs via HDMI on 2 different computers.

  Thank you.

  Hello

  It seems that the HDMI connection can be switched in PC mode.
  PC mode is available only for the VGA input.

  Please take a look at page 28
  http://www.Toshiba-OM.NET/LCD/PDF/English/Country_Specific/BV500-32-English-specific.PDF

  For switching source PC, press the "SOURCE" on your remote and select the PC input. You can also use the Source menu to switch to PC mode.
  Note that PC mode menu settings are only available when the TV is in the source PC.

  But if you have connected the PC to the HDMI port and the image is not clear enough, I recommend you to change the level of sharpness in the image menu.

• Why do you want my piece of sound through my TV sony vaio when I use the HDMI connection

  original title: sound through my tv speakers
  Why do you want my piece of sound through my TV sony vaio when I use the HDMI connection

  Hello

  What version of OS are you using?

  Check if the sound configuration is set to HDMI

  1. click on start, click on Control Panel

  2. click on the Audio tab, select read. Now, check if you have selected Digital Audio (HDMI).

• DSC-WX150 will stop recording at 03:00 minutes when you use the HDMI video output

  Hello

  I have a Sony Cybershot DSC-WX150 camera.

  When using an output HDMI cable to view the camera to a television screen, the video movie recording function to 3:00minutes exactly every time automatically stops.

  When there is no HDMI cable plugged into the camera, it records fine 20 minutes.

  I tried changing film formats, changing the power settings, camera reset the values by default, etc., but with no difference.

  Why it only record at 03:00 minute exactly mark when you use the HDMI video output? Someone knows how to fix this?

  Thank you

  Hi tight,

  Welcome to the community of Sony!

  If I understand correctly, when you use your TV as a monitor while video recording automatically stops and does not cross the entire 29 minutes. Based on your manual, it is normal for the camera when it is connected to another device via the HDMI cable. This serves as protection for the camera.

  If my post answered your question, please mark it as "accept as a Solution. Thanks_Mitch

• DV7T-4100 no noise at all - w / Built in speakers, headphones or using the HDMI to the TV connection

  Hello and thank you in advance for any help provide you.

  DV7T-4100 w/processor i5 M460

  Product ID: WW189AV

  Home Premium to Windows 7 (64-bit)

  My laptop has no sound at all - built in speakers, headphones, even when not connected to my TV via the HDMI port (which is a separate conductor).

  2 weeks ago, all the sounds worked. I look at the (and listen to) the videos to youtube using my headphones. I stopped a video and used my laptop until the next day. There isn't any installs or updates applied I know. The next day, I closed Youtube and play words with friends and there was no noise. I restarted the laptop and still no sound.

  I have read and worked through many processes and patches found on this and other forums, but did not get his job. Also I tried to restore my laptop fails for before this issie but my restore points (corrupted).

  Drivers: The two drivers are present and state that they do not work correctly - this is the current version

  ATI high definition Audio Device Date 06/05/2010 Ver 7.11.0.7706

  IDT High Definition Audio Codec Date 17/06/2010 Ver 6.10.6289.0

  I uninstalled (checked delete the driver for this device) and reinstalled several times.

  I uninstalled, shutdown, removed power and battery, which is held from the Start button / stop for 30 seconds and then the and let it reinstall the drivers (they installed automatically when starting, I was not able to run the sp50642.exe I downloaded).

  I also used the HP recovery tool and reinstalled the drivers to factory default

  I run Microsofts problem finder and reports everything works.

  I checked there is no settings enabled or disabled. When I test the speakers 'Sound and headphones' properties, I get "could not play the test tone".

  FYI - I did not update the BIOS but I checked and mine is the updated F.29 version but the date is more than 14 days, then the download version of the SP55299.

  I appreciate any assistance troubleshooting, you may need to provide. Please let me know any other info I can provide. Thank you

  Hi JSHEP500,

  I suggest that you perform a backup and restore to an earlier date when the sound worked. Here is a document for using Microsoft System Restore (Windows 7) which explains how to go back to a previous restore point.

  If this does not resolve your problem, you will need to recover Windows 7 operating system using Microsoft Windows Backup and Restore.

  I hope that this helps, please let me know how it goes.

  Thank you and have a great day!

• I want to detect and use the video entering via the HDMI port on the computer. I was told the HDMI port was not set, but I can't seem to find the signal or the video.

  I want to detect and use the video entering via the HDMI port on the computer. I was told the HDMI port was not set, but I can't seem to find the signal or the video.  Any suggestions?

  As Tom SC replied, you must contact the company that manufactured your computer.  In general, the ports HDMI on most computers is an out-bound port, send video / digital audio output.

  You should probably use a video capture card that can capture from HDMI source,

• No signal is detected by the TV (KDL55HX800) using the HDMI source devices after the storm

  No signal detected by Sony Bravia TV (KDL55HX800-S/N 8114631) using the HDMI source devices after a storm last night.  Inputs RGB and components work fine.

  I have reset to factory default

  Installed the latest software/firmware from Sony site

  Checked the HDMI cables and selected the correct entries to the TV but even problem

  What could be the problem? At main / V Board? If so, what is the replacement P/N and where can buy it go? Link to store etc.

  Thanks in advance

  Hi mgkaundi!

• How can I get multi channel audio via the HDMI port on an early 2015 MacBook Pro?

  I try to get the 7.1 audio channels to flow from my MacBook Pro to a cinema set up. The display works fine now I plug the HDMI in however the sound still Mac speakers. I checked the settings and no HDMI output is available. An airtime option is available, but that returns only two channels as a maximum to the receiver. When I go to the configuration of the source on the receiver it receives video at 1080 p 60herts however it is specifically stated No Audio from the Source.

  Also, I have connected my iPhone 6 s more using an Apple through the same HDMI cable adapter and it works perfectly. We also use HDMI with our PS4 occasionally and it works perfectly, even with the 3D.

  Thus, the MacBook Pro is early 2015 with an i5, the receiver is a Harmon Kardon AVR 2700 (we run 7.1 channels of this) and we are connecting via the HDMI port through a 50 ft HDMI before. The receiver sends the audio to a projector with 1080 p 60 hertz if it changes anything...

  Also if it helps the receiver supports dts - hd master audio decoding, Dolby True HD/Digital Plus decoding, HDMI 1.4 (HDMI is compatible 2.0), as well as multi-channel input and PCM and linear PCM.

  I use a "Behringer UCA202' audio device I bought on amazon.com for only $29.

  It works very well for the audio 5.1 or 7.2. Works connect optical toslink. Just plug it into a usb port on your Mac and a cable optical toslink to your AV receiver.

  My Yahmaha 7.2 audio/video receiver is measuring process the digital signal in THX, DTS, Dolby digital Pro logic, a cinema, etc.

  

• HP laptop - 15-f233wm: external monitor connected to the HDMI port has video but NO sound

  If I connect an external monitor to the HDMI port and check my audio device on the right on the screen cone winder it displays 2 only) 1 HP and Intel) 2 Audio display speakers and No HDMI option selection.

  Ernie4576 wrote:
  

  If I connect an external monitor to the HDMI port and check my audio device on the right on the screen cone winder it displays 2 only) 1 HP and Intel) 2 Audio display speakers and No HDMI option selection.

  By adopting the option monitor MHDI PC/AV Pc mode will solve the problem, I use a unit screen color Samsung TYPE model / MODEL: C27F591FD (N).

  The device playback option on the care of the portable property are all set to default, Intel C27f591 display sound card works fine!

• Satellite L650 - no signal on TV via the HDMI port

  Hello

  I have a problem with the HDMI port. I am not able to connect the L650 to my TV. There will be no incoming television signal. The TV port is correct because I can connect my digital camera without any problems. The HDMI port is not displayed in the hardware Manager. I don't use the version of windows 7 that has been installed originally. I formatted the disk and have reinstalled a different version of windows.

  Do I need a special driver to activate the HDMI port? I just installed the ATI catalyst driver. If you would like more information, I'll try to give them as soon as possible.

  Thank you very much for your help

  Hi song2.

  > have reinstalled a different version of windows.
  And what version of Windows you have right now?
  You have yellow exclamation points in the Manager of devices or unknown devices?

  In general there is no driver special HDMI port. If you connect your laptop to TV/monitor external, you must press the FN + F5 key combination to switch between monitors.

  Check it!

• Using the Serial Port on the HP 50 g graphic calculator

  Hello world

  I have another question. I want to use the Serial Port on the HP 50 g to connect with another device. The device is called the MFJ-1214PC. What it does is to accept the text and commands through a 9-pin serial Port and converts the text in a Code Morse/RTTY sound audible. It also decodes Audible the Morse Code and RTTY radio signals and displays them as text on your computer. The program that controls the MFJ-1214PC was originally written for an IBM PC for the MS-DOS operating system. The HP 50 g graphic calculator meets the system requirements for the simplest version of the program. I was wondering if there is an MS-DOS emulator written for the HP 50 g, which would allow the HP 50 g to become the computer in this case, or if the program could be rewritten and brought to the HP 50 g. If it could be rewritten, programming language what do you think would be better suited to this type of application (if it is even possible?) or UserRPL, SystemRPL or Assembly. Don't forget that I'm a complete newbie with the HP50g and have never programmed with it yet. I'll include the manual of the MFJ-1214 PC as an attachment so that you won't have to look for him. Thank you in advance for your help!

  ~ Zekelegge ~.

  I understand (from my brief overview) out of the box-MFJ-1214PC, this offer box decoder output series computer.  The computer (50g in your case) will have the software to read message series and then convert that to an output for display.

  BartDb gave you the right answer.

  A serial cable with the correct speed level and reversing lever to manage as well as the 50G has a RS-232 signal to the outside world is the ideal solution.

  However, make sure that the output of the decoder box series package can be understood by the 50 g. aud, bits, etc.   (you have the set-top box manual, so you'll have to look that up)

  the streamsmart is not an aggregator of serial port.

  in other words, these connectors DIN of Qty 4 on the front do not accept series rs-232 input and send then to 50 G.

  I'm not an expert, streamsmart more info on these boxes is rare to find.  The probes are even more rare.

  However, I know that the 4 connectors are for the analog-to-digital conversion in the probes.  The streamsmart works as a "data logger" in which he sees the input probe, the A/D converted, then sends it to the 50G (or a computer via the USB port).

  In addition to the solution of Bart, there was another named Tiwag forum poster who created a serial cable and displayed a schematic representation of the cable.  This information can be found here:

  https://groups.Google.com/Forum/?fromgroups#! searchIn/comp.sys.HP48/serial$20port/comp.sys.HP48/ltcane1jSOw/uHyw2Ti03kgJ

  to see an example of programming to use the serial port of 50G, you can reference the following hpcalc GPS data collection program.

  http://www.HPCalc.org/details.php?id=7105

  It is written in userrpl so can be crossed with the reference of users advanced for the translation of the syntax.

  It seems that the main routine of concern for the comm to the gps is in the file "GPS >.

• Dynadock U3.0 - cannot use the Ethernet port after update 8.1 Win

  Hello world

  I use a u3.0 dock Dynadock with my Vaio PCS 13.
  I'm not able to use the Ethernet port on the Dynadock since I updated my Windows 8.1 device update 1.
  Before that everything worked well.

  I'm not able to re-install the drivers correctly (tried 7.6m0, 7.5m2). While the game driver tries to start, I get an error message, Setup is not able to put a bunch of registry (SYSTEM\CurrentControlSet\Services\DisplayLinkGA\D evice1) keys (up to 0). (Image 1)

  If I ignore these messages and do not install the driver, the Ethernet port will not installed in Device Manager. (Image 2)

  If I try to install the driver manually (DisplayLink network adapter NCM), I'll get an error message that a driver has been found but that access has been denied. (Image 3)
  I started the safe mode and could install the driver. But if I reboot in normal mode, the machine could not be started.

  I also tried to disable UAC and I am logged on as administrator 'real '.

  Please find the attached messaged (in German) error:

  [picture 1]: http://picload.org/image/lcalwop/toshiba.png
  [Picture 2]: http://picload.org/image/lcalwoc/toshiba2.png
  [Picture 3]: http://picload.org/image/lcalwlg/toshiba3.png

  BTW: If I unzip the Installer (7.6m0) and install * inf for the good Fri & dev (4503) it still does not work...

  I put t know what to do anymore...

  Hello

  After upgrade to 8.1 Windows, you should also update the software/driver Display Link
  This is very important!

  The latest version of the driver can be downloaded here:
  http://www.DisplayLink.com/support/downloads.php

  Note: the old version must be removed!