Tiara dac combined with the NI PCIe-6259 does not send the data

Similar Questions

• Question A100 - 01 Q satellite in combination with the Syncmaster 226BW

  Hello
  I need help. I have problems with "A100 - 01 Q" in combination with the Syncmaster 226BW, the problem seems to be the display driver, there is no new version available on toshiba.com. Would you mind and give me some advice?

  I need a new driver for the Gefroce 7600 GO... (Modelltype: A100 PSAAR)

  Thank you!

  You have searched the site Toshiba us compatible graphics driver?
  It was big mistake.

  You perform a search on the European driver of Toshiba site. This laptop A100 PSAAR was designed in the EMEA regions.

  Then please visit this site;
  http://EU.computers.Toshiba-Europe.com/cgi-bin/ToshibaCSG/download_drivers_bios.jsp?service=EU

  Choose your model of laptop just in the form of download and download driver compatible ;)

  In addition, you could test the graphics drivers nVidia 3 sites like www.omegadrivers.net and www.laptopvideo2go.com

  Best regards

• Does SOUL used in combination with the hierarchy of position for purchase requisitions

  Hello

  We use the hierarchy of position for purchase requisitions.

  Can we use management engine approval in combination with the hierarchy of existing post for purchase requisitions for workflow routing more flexible?

  Kind regards

  Natalia

  Hi Natalia,

  Using hierarchy Position in the SOUL is supported only in R12, please refer to the following document:

  Using SOUL, creating approval routing at a certain Position in the hierarchy of Position HR [ID 1501433.1]

  Hope this helps,

  Please, if this response has answered/solved your question/query, please mark it as correct or useful to facilitate the correct answers to the members of the community.

• filling of datetime column SQL Server with the data in the date column oracle

  After a lot of "finangling", I think I have my link dg4msql works well between Oracle and MSSQL.
  
  Now, what I'm trying to do, is fill a table in MSSQL with an Oracle table column values, whenever a new row is inserted in the Oracle table. I use a very simple trigger on the oracle table that goes basically like this:
  
  mware is dblink to MSSQL database, oracle col worth DATE and mssql col is of type DATETIME
  
  This is the relaxation: (edited to show only the column in question)
  ==================================================================================
  CREATE or replace TRIGGER < oracleowner >. INSERT_INTO_NVDB
  AFTER INSERT ON < oracleowner >. < oracletable > for each row
  BEGIN
  insert into '< mssqlowner > '. «< mssqltable > @mware «»
  (
  "load_date_time,"
  )
  VALUES)
  : new.loading_date,.
  );
  
  END;
  ==================================================================================
  
  Now, when you enter a record in the Oracle trigger triggers ok table but does not insert a date in the MSSQL table, the 'load_date_time' in the mssql table can have NULL values so I guess there just inserts a null value.
  
  When I activate the triggers on the table MSSQL, which then takes these values and inserts them into another table with values from other tables, inserting in the Oracle table fails because the relaxation on the MSSQL database tries to pass the date (which is empty) table MSSQL in another table where the datetime field is not null.
  
  I guess it's because Oracle date format is not compatible with MSSQL, which I think is "yyyy-mm-dd hh: mm:"- so I have to either convert the date format by default Oracle to match a MSSQL, or convert a char of the trigger value. (The developer of the side MSSQL says if I can convert it to a char value that should be ok too)
  
  I think that it is probably better to leave it in the date format, the best way to do this would be to put an "alter session set nls_date_format ="at the beginning of the trigger?
  
  Can I convert the date to char the trigger easily? If there is a better way to proceed in the way I approach it I'm all for it.
  
  Thank you!

  Hello
  Your best option is to explicitly convert dates Oracle in a format recognized by SQL * Server. It's more coding, but then you know exactly what is being inserted and you give more control, if anything changes. You can also code to handle null data.
  I'm not sure than to try to change the format of date to 'alter session... ". "do what you want.
  You can use "to_char" on a date into character data-

  To_char (, "HH24:MI:SSxFF of MON-DD-YYYY")

  and use any mask format supported.
  You also use 'to_date' to transform the character data in a date format, as well as 'to_char' and 'to_date' in combination.
  For example -.

  SELECT TO_CHAR (TO_DATE (October 27, 98 ',' DD-MON-RR'), 'YYYY') 'Year' FROM DUAL;

  This is all discussed in the documentation-

  Oracle® database
  SQL language reference
  11g Release 2 (11.2)

  where it also describes the different format masks.
  If you need further assistance on the use of to_date, to_char formats then ask in the forum SQL/PLSQL.

  SQL and PL/SQL

  where they have more experience.

  Kind regards
  Mike

• See the time with the date in the cell?

  How do you not see time with the date in a cell? I tried all the settings I can find but without success.

  Using the numbers from version 3.6.2 (2577) - OS: El Cap 10.11.6

  I don't want to see that 12:00:00 AM

  

  Hi Russ,

  Inspector to format > cell, the parameters as shown below:

  

  Kind regards

  Barry

• Print an e-mail with the date of the transmission

  Hi, I need to print an email I wrote to send as proof, but when I do that it shows the date of printing, NOT the date it was originally mailed. Is there a way to fix this? I hope that you can help us as soon as POSSIBLE! Thank you, Annie.

  anniesol said

  Hi, I need to print an email I wrote to send as proof, but when I do that it shows the date of printing, NOT the date it was originally mailed. Is there a way to fix this? I hope that you can help us as soon as POSSIBLE! Thank you, Annie.

  Problem is now solved! Choose the print option 'other measures' dropdown list allows email to be printed with the date of the shipment.

• problem with the data record

  Hi, I'm new to LabView so I know that the thing I'm doing is relatively easy, however, I'm stuck.

  I made a small program that gets 5 steps (for now replaced with random numbers) and as well as the date and time data in the text file. I intend to run the program for long periods of time, so I want to increment the file name/path every hour, but after the addition of this part of the program does not create any file, although the program runs without error.

  Block diagram is attached, could someone point out to me what is wrong and what I should do to reach my goal?

  Thanks in advance!

  Hi marcis,.

  Acually, the logic of the program was completely wrong.

  1. your comments the file path will never help you. Because after leaving of while loop, the structure of matter will run once and LV will stops running.

  2. open and close the datalog only once file. Try to make all your manipulations between opening and closing your file datalog. Otherwise, it will be difficult to manage when you develop your code.

  3 case construction outside the loop is meaning less. If you want to run the program permanently, place all functions inside the while loop you want to run. While the loop will run continuously until you get satisfied.

  4. incorrect data streams. All programmers need well with the data stream.

  Just go into the basics of labview here and try to realize your logic again

• Measures with the date Conference

  Hello

  I have to make an application, as part of my end of study project, which allows to calculate heat flow. Pour this, I have data measured with thermocouples. These data are stored on a data recorder that record these data on a .txt, .xls or .csv file (it is to be chosen by user).

  I'm not very chiseled with LabVIEW.

  In a Prime Minister, I tried to read the .txt file data. I can read the 1st line as I wish but not others.

  So I decided to work with a .xls file. The temperatures Conference goes smoothly. For time is the date, it's more complicated. Indeed, I would like to USE date and time corresponding to each measure to plot a graph XY with the date and time X and Y the temperature of the thermocouple.

  Kind regards

  Here's an example (VI from LV2011 but attached VI en LV2010) made on the basis of your code. Comment by watch it extract the news date and time of the string and generate the the from graph XY time in seconds in X. realized very quickly, it is without doubt room for improvement but you will serve as a basis for work at least.

  

  To define 'Structure box' serving at first as far as being 0 and calculate relative time to the following samples. Thus the x-axis of the graph starts at 0.

  My time is short, I renounce other comments but I happy to answer specific questions.

• Problems with the date and time - have to reset the date & time on reboot

  original title: problems with the date and time

  Whenever I turn on my computer (Windows XP 2002) I click on F2.  Then I re - set the date and time it occurred in January 2006 1 h every time I have turn off the computer.  Can someone tell me what I need to do?

  You need to replace the battery in time clock (RTC) real of your computer.  It can also be called the CMOS or BIOS battery.

  Many computers, this battery is an inexpensive CR2032 button available in almost every pharmacy corner.  There are, however, some computers (especially laptops) that require a different (and probably more expensive) battery.

  Whatever the expense, almost all of these batteries are easy to replace.

  To get help, post back with the brand and model of your computer.

• Problems with the data connection

  Hello
  I bought a Z3 Compact Xperia on December 10, 2014. I live in Italy and I use Vodafone as my everyday.
  I got a SIM card replacement nano with LtE capabilities just to get the phone in the new fast network. The problem I encounter is that, since on January 13, 2015, I had some problems with the data in mode 3 G connection.
  So far, I used my phone normally, then I tried to send a text message with WhatsApp and phone stuck with the clock icon in the lower corner of the bubble of the message. I thought it was a temporary network problem but I'm not sure about this.
  I live in a small town where the coverage is really good, either in 3G and LTE. I tend to use the 3G because it uses less battery and it does not affect my 4G data plan.
  Th issue, it's that if I do a speedtest when I feel that network glitch I have a ping, but with very good download speeds up to 2000ms.
  The problem is that I believe that this is not a network problem because my mother has a phone HtC One S and runs vodafone without problem even when I'm having the glitch.
  I tried to reset the phone to factory settings, but it did not help.
  In LTE / 4G I do not experience this issue. In fact, I think if there is problem need a phone related software because the antenna works very well.
  If it doesn't I'll try to contact ad Vodsfone then I'll send my phone for the helpdesk if Vodafone tell me that the question is not on their network.

  Thanks in advance for your help.
  Simone

  It's pretty strange, double check the APN settings and contact EE in this regard.

• DM 4.0.0.833 and synchronization with the data-&gt; TABLES DROP dictionary

  Hello

  I have a DataModeler physics implemented in Oracle database, I drop a table of data in DM maker 4.0.0.833.

  The database with the data dictionary synchronization and does not detect that you have deleted a table.

  
  Is this a bug? Or am I something wrong?

  
  

  Thank you
  

  Please mark the thread as answered if answer has helped you to solve the problem.

  Thank you

• Hi, I use lightroom 5 and have been for several years.  Today I imported several batches of today images from different cameras without any problem, but the images of a particular card (with an incredibly large memory) does not matter.

  Hi, I use lightroom 5 and have been for several years.  Today I imported several batches of today images from different cameras without any problem, but the images of a particular card (with an incredibly large memory) does not matter.  I see other people have had similar problems, but I am not able to follow these solutions and would very much help here.  I have an IMac.

  If you had probably two problems

  Permissions, the other is the hardware problem causing slow import and the card cannot be read by your operating system.

• Carbon X 1 with the date of availability of touch screen

  Carbon X 1 with the date of availability of touch screen?

  Welcome to the community.

  The X1CT seems to be available to order online now. You can right-click on the link to the Lenovo store top shop.

  Kind regards.

• Hello, I had a problem with my band. It does not really suppose he numbered scenes everything in order and he has so far in until I missed an and changed for the good order. But now when I go back to where I left and I have create a new scene

  Hello, I had a problem with my band. It does not really suppose he numbered scenes everything in order and he has so far in until I missed an and changed for the good order. But now when I go back to where I left and I have create a new scene number come up as * it and I need to change personally. is their any way I can change it to order normally?

  Hello

  You can manage this through the "Manage scene numbers" option in the menu 'Production '.

  There is a setting in this dialog box to assign scene numbers automatically to the new scenes.

• What happens with the data on ROW as soon as they are storage migrated to VMDK?

  Hi all

  The following scenario: I have a virtual machine with virtual RDM. I have storage migration online, selection of thick discs so convert the VMDK RDM. The question is: what is actually happening with the data on the LUN that was RDMs, once the migration is complete?

  I expect that the data are still there, and if needed, I can remove the VMDK and re - attach the new LUNS as RDM.. But I can't find any official information on this.

  I am not mistaken? Y at - there somewhere that says clearly what is happening with the data?

  Thank you!

  Your wait is quite correct. The data on the raw LUN will not get affected once it is converted to a virtual machine. Only the mapping of RDM file is deleted and the LUN becomes available, and you can use card or again as an RDM or to create a VMFS data on that store.

  André