Tibetan will not work with new FF; has worked before the recent update (on Mac OS 10.6.8 18.02

Similar Questions

• Remote Desktop does not work after the recent update to VMWare Player, why?

  I have VMWare Player installed on a host with multiple virtual machines. I like to the DRC to the remote host and I've been in months, but in the recent update to VMWare Player, my connection to the DRC has dropped. Now when I try to the DRC to the host it hangs at "Estimate the quality connection" after I get my user name and password, but then it stops without errors or messages. I've updated the host and rebooted several times, I also tried to DRC from a computer on the same local network as the host with no result. I have a friends in exactly the same problem, connection dropped in the middle of the update and no resolution yet. Help?

  I uninstalled VMWare Player and did a clean install (rather than updating an earlier version) and the problem is solved!

• My laptop will not work, he said of updates step 3 of 3, but it is at 0% and keeps restarting itself. How can I get rid of this to open a session?

  My laptop will not work, he said of updates step 3 of 3, but it is at 0% and keeps restarting itself. How can I get rid of this to open a session? I tried the safe mode and do a system restore, which get rid of it. And suggestions? Thank you.

  Hello

  1. have you made changes on the computer before this problem?

  2. do you get an error code?

  Follow the mentioned article:

  Error: Failed to setup of the Windows updates. Restoration of the changes. Do not turn off your computer when you try to install Windows updates

  http://support.Microsoft.com/kb/949358

  Note that it takes as much time to do the upgrade as to reinstall the operating system. In addition, some of your custom Windows settings may be lost through this process.

  WARNING: Important This section, method, or task contains steps that tell you how to modify the registry. However, serious problems can occur if you modify the registry incorrectly. Therefore, make sure that you proceed with caution. For added protection, back up the registry before you edit it. Then you can restore the registry if a problem occurs. For more information about how to back up and restore the registry, click on the number below to view the article in the Microsoft Knowledge Base:

  322756 (http://support.microsoft.com/kb/322756/)

  How to back up and restore the registry in Windows

  Hope the above information is helpful.

• Photosmart C4280: Photosmart Essential 3.5 will not work after the Win 10 update

  The Photosmart Essential suite, which includes the scanning software will not work after the upgrade to Windows 10.   There is no message error that pop up or are listed in the event log.  Printing continues to function properly.    If the s/w is not compatible with Win 10 there the other scanning software free that I can use?

  Hello

  Thank you for using the forum.  Think that you are facing the same problems as others with Win 10 updates.

  Try this solution:

  http://h30434.www3.HP.com/T5/inkjet-printing/HP-Solution-Center-fails-to-launch-cannot-open-solution-here/m-p/5424438/highlight/true#M515792

   

  Hope that helps.

  Please click on "Bravo Thumbs up" as an encouragement and "Accept as solution" if it helped to solve your problem.

• How can I activate my Adobe Photoshop CS.  It will not work on the line and must be made by phone

  How can I activate my Adobe Photoshop CS.  It will not work on the line and must be made by phone?

  You must download the version without activation of CS2.

  Download Acrobat 7 and CS2 products

  Install, then enter the new serial number provided at this link.

• Try to do a kirikiri (creator of virtual Japanese novel) but the novel will not work unless the locale system are Japanese.

  Original title: how to change system locale

  So I'm doing a kirikiri (creator of virtual Japanese novel) but the novel will not work unless the locale system are Japanese.

  I know how to do it manually. but I would like to create a program written in Java (or batch) to speed things up.

  This issue is beyond the scope of this site and must be placed on Technet or MSDN
  http://social.technet.Microsoft.com/forums/en-us/home
  http://social.msdn.Microsoft.com/forums/en-us/home

• Lightroom will not work on the computer after payment has failed and the new mode of payment put in.

  Adobe will not work.  Lightroom need to work.  Tried to uninstall Lightroom and creative cloud, they stopped working when my payment failed.  After putting in the new mode of payment that they still do not work.  Now don't reinstall it on mac 10.10.5 after several attempts and reboots.  Also, if anyone knows a phone number for adobe support.  I tried to find one, but it just shows that I have are not eligible for phone support... I pay for a product, I can call someone!

  allow a day of pst for your payment to process.  It is currently Saturday am pst.

  then check your account to see if it's what you expect.

  Otherwise, contact adobe support during the time pst by clicking here and, when available, click on "still need help," https://helpx.adobe.com/contact.html

  If it shows your subscription is current, Troubleshooting FAQ: what should I do if I have a subscription, but my application acts as if I had a trial?

• New keyboard will not work. The pilot is supposed to automatically load.

  Try installing a keyboard iHome.  The pilot is supposed to load automatically, but it didn't.  Computer will not recognize the keyboard.  Is there a way to make the system recognizes the keyboard?

  Hello

  ·         What is the model number of the keyboard?

  ·         What operating system is installed on your system?

  ·         How you try to connect the keyboard (wired or wireless)?

  If you use IHome-K231MS then it is not compatible with Windows.

  Check out the link provided below for more information

  http://life-works.com/product_detail.asp?dept_id=100027&sub_dept=100038&product_id=100089

  Please come back with more information on the keyboard so that we can help you in a better way.

• 64-bit virtual machines will not work on the new computer running 64-bit Windows 8

  
  My new computer running 64-bit Windows 8. I installed WorkStation version 9 and the virtual machines have 64-bit operating systems will not work.

  have you turned on VT in the host system BIOS?

• None of my videos will not work after the update to version 13.1

  I tried of you tube and I still get "an error occurred trying to come back later ' player will not mount on my homepage that uses silverlight. The two sectors work with Chrome and IE

  Hey delittle632, this is probably due to the recent update of the plugin to version 11.3 adobe flash. It has caused similar problems for many other users (chrome & IE get provided with a different version of the plugin by adobe).

  You can try to remove flash 11.3 of the section of the configuration/program windows downgrade to an earlier version & Control Panel, until adobe fixes these problems.

• The contents of the folder WAV files will not work unless the folder is on the desktop.

  Re: Windows Vista Home Premium 32 bit W/sp2 installed.

  I created a new folder for Wav files and set it on my desk until I was finished downloading the files for convenience purposes. I then used them to slightly change the default sounds for different commands, events and others. Everything worked fine until I moved the folder on the desktop to another location. Files located in the folder assigned and uncorrupted but will no longer work when the event or the command is enabled. If I move the folder to the desktop everything works well again. No error or anything are reported. The files in the folder will simply not work unless the folder is on the desktop. Is that all I could do to fix this?

  Hello

  1. what happens when you play the file from another location, you receive error message?

  2 - is that happen with some .wav files or all files?

  3. did you try copied the contents of the file and save it to another location and check the number?

  Step 1: Restart the computer to boot to verify if any third-party application is causing the problem.

  Follow the steps provide in the article below to perform the clean boot. http://support.Microsoft.com/kb/929135

  Note: Make sure to restart the computer to normal startup followed step 7 in the link.

• Can I do a clean install of Windows 7 Pro 64 bit on Vista Ultimate 32-bit upgrade. Installation file will not work. The error is described below.

  The XPS 730 with Intel Q9450 computer yourself running Windows 7 64 bit? The details of performance show that it is capable of 64-bit. When I try to install Windows 7 pro 64-bit upgrade, the installer will not work. I get an error that reads:
  The version of this file is not compatible with the version of Windows that you are running.
  
  I'm currently running Vista Ultimate 32 bit. Everything that I read on Microsoft and elsewhere says that you can go from Vista 32 bit to an operating system Windows 7 64-bit as long as you do the clean install. I'm that far away since I can't even run the installation.
  Maybe nobody knows what could be the problem?

  Hi Hal K,

  Thank you for visiting Microsoft Answers.

  If you are currently running a 32-bit version of Windows, you can only perform an upgrade to another 32-bit version of Windows. Similarly, if you run a 64-bit version of Windows, you can perform an upgrade to another 64-bit Windows version.

  If you want to move from a 32-bit version of Windows to a 64-bit version of Windows, and vice versa, you will need to back up your files and then perform a custom of the version of Windows you want to install installation.

  You can see the following link, installation and reinstallation of windows: http://windows.microsoft.com/en-us/windows7/Installing-and-reinstalling-Windows

  http://Windows.Microsoft.com/en-us/Windows7/32-bit-and-64-bit-Windows-frequently-asked-questions

  Swati K - Microsoft support technician
  Visit our Microsoft answers feedback Forum and let us know what you think.

• My preloader will not work in the latest version of Internet Explorer.

  I am designing a site for a friend who has just upgraded to the latest version of Internet Explorer. Now the preloader to load his site will not work, and it stops right on the number of '0 '. Here is the code I use. The code is displayed on the first keyframe and the site is on the second keyframe.

  Stop();

  Preloader

  loaderInfo.addEventListener (ProgressEvent.PROGRESS, updatePreloader);

  function updatePreloader(evtObj:ProgressEvent):void

  {

  container for the progress of the site (download)

  var p: Number = Math.floor((evtObj.bytesLoaded*100)/evtObj.bytesTotal);

  preloader_txt. Text = % + '% ';

  If (p == 100) {}

  nextFrame();

  }

  }

  When my friend right click directly on the charger, it has the ability to 'play' flash and loads site. I would like to find a clean and elegant way to him load his site.

  
  

  I'm puzzled. Everyone knows about this problem? What I can do to fix this problem or should I right just a warning on the page?

  Thank you very much!
  

  Try to take a different approach (better) to preload...

  http://www.gotoandlearn.com/play.php?id=85

• BlackBerry Smartphones Ringtones for my contacts will not work if the (Torch 9800) handset is locked

  Ringtones for my contacts do not work if the (Torch 9800) handset is locked; the default / everyone of another ring is used instead.  When the handset is not locked, it works well.  Someone knows how to fix this?

  [Title edited to reflect the new subject.]

  @ City
  Maybe you have enabled a content protection?

  [Title edited to reflect the new subject.]

• PunkBuster not working after the latest updates of Windows

  Hello

  Since I installed the latest updates for Vista x 64, I continue to pounce on COD5 with this exception:

  Application CoDWaWmp.exe, version 1.5.1220.0, time stamp 0x4a5241f6, failed module pbcl.dll, version 0.0.0.0, time stamp 0x4a5cb487, exception 0xc0000005, fault offset 0 code x 00026914, 0x5d0, failing application start 0x01ca36117f69c74e process id.

  The problem seems to be related to the Punkbuster client. Before the latest updates, I don't have a problem.
  For Windows XP, a similar problem was introduced with KB917422 (in connection with Kaspersky anti virus I think).

  Any thoughts on this topic?

  Best regards, Wilbert

  SRY, but if PB doesn't work, you don't have to format your PC.
  Just try to reinstall PB.